A comprehensive smart home platform offering wireless automation for heating, security, light, and shade control, developed by eQ-3.
Homematic is a premier smart home brand developed by eQ-3 AG, offering sophisticated solutions for residential automation. The system encompasses a wide range of wireless and wired devices designed to control heating, lighting, shading, and security.
The current generation, Homematic IP, is built on the robust IPv6 standard, ensuring secure and reliable communication. Whether controlling a single room or automating an entire building, Homematic provides scalable options managed through a user-friendly app or a central control unit (CCU). Its products are renowned for their energy-saving potential and ease of installation.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To restore factory settings, typically disconnect the device from power (or remove batteries), then press and hold the system button while reconnecting power. Continue holding until the LED flashes orange, release briefly, and press and hold again until it lights up green.
The Duty Cycle is a legal limit on radio transmission time (1% per hour in the 868 MHz band). If reached, devices may temporarily stop functioning until the limit resets (usually within an hour).
Yes, most battery-operated Homematic IP devices use standard AA, AAA, or CR2032 batteries. Refer to the specific device manual for the correct battery type and polarity.
Open the Homematic IP app, select 'Add device', and follow the instructions. Usually, you will need to scan the QR code (SGTIN) on the device or enter the last four digits of the device number manually.