GLITTER specializes in industrial intelligent spot welding machines and capacitor energy storage pulse welders designed for battery pack assembly and metal welding.
GLITTER is a manufacturer of specialized welding equipment, focusing primarily on high-performance capacitor energy storage spot welders and combination soldering stations. The brand's products, such as the 811A, 801H, and 812A models, utilize advanced pulse formation technology and high-frequency inverter super energy storage capacitors to deliver precise, millisecond-level solder joints. These machines are engineered to eliminate interference with AC power supplies and prevent circuit tripping, making them suitable for both industrial manufacturing and professional workshops.
GLITTER's product line is essential for the assembly and maintenance of lithium battery packs, including LiFePO4 and ternary lithium batteries used in electric vehicles, unmanned aircraft, and power tools. Their welders feature intelligent display control panels, dual-mode operation (Automatic 'AT' and Manual 'MT' foot pedal control), and high peak welding currents capable of welding pure nickel, copper, and aluminum-nickel composite sheets. With a focus on safety and efficiency, GLITTER designs its equipment with specific error monitoring and robust thermal management for heavy-duty usage.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Upon initial setup, it is recommended to charge the machine for approximately 18 to 20 minutes until the voltage rises between 5.6V and 6V before initiating spot welding.
The E01 fault prompt typically indicates that the spot welding electrodes are touching each other or that the solder pins are oxidized. Separate the electrodes or clean the pins to resolve this.
No, you should strictly use the GLITTER adapter provided with the machine. Using a third-party adapter may damage the device.
MT (Manual Trigger) mode allows you to control the weld using a foot pedal, which is ideal for parameter adjustment. AT (Automatic Trigger) mode automatically initiates the weld after a set preload delay when the welding pen detects pressure, suitable for rapid, high-volume work.
GLITTER welders are designed for rapid welding of materials such as pure nickel, nickel-plated copper, stainless steel, iron sheets, brass, and titanium, specifically for battery electrodes.