FULAIM specializes in professional wireless lavalier microphone systems, delivering high-quality audio, noise reduction, and low-latency transmission for creators.
FULAIM is a progressive manufacturer of professional audio equipment, focusing heavily on innovative wireless microphone systems. Designed for modern content creators, videographers, podcasters, and live streamers, FULAIM's product line includes versatile wireless lavalier microphones like the X2, X3, X5, and WM200 series. These systems are highly regarded for their adaptive frequency hopping (AFH), ultra-low latency technology, and robust active noise cancellation features, ensuring crystal-clear audio capture across varying environments.
Whether recording mobile interviews, high-energy vlogs, teaching sessions, or live broadcasts, FULAIM offers user-friendly and reliable solutions. Bundled with portable charging cases, comprehensive connectivity options (including USB-C and Lightning smartphone adapters), and localized audio backup memory functions on advanced models, FULAIM microphones smoothly bridge the gap between amateur portability and professional-grade performance.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Connect the Type-C or Lightning port of the receiver to your cell phone using the provided OTG adapter. For Android phones, you may need to enable the "OTG" function in your phone settings to allow audio transfer.
If disconnected, turn on the transmitter and press and hold both the power and SET buttons simultaneously for 2 seconds until the indicator flashes. Repeat this process on the receiver. Wait a few seconds until both indicators stop flashing, indicating a successful match.
Set your FULAIM receiver's output volume between 0dB and +3dB (or level 2-4 depending on the model), and ensure your camera's internal recording volume is set to a corresponding minimum level. This technique improves the signal-to-noise ratio and helps avoid audio distortion.
On supported models like the X5, long-press the SET button on the transmitter for 2 seconds to start or end internal recording. This acts as an audio backup with an onboard 4GB memory, holding up to 9 hours of audio. The files form a loop cycle and can be exported via a Type-C cable.