FULAIM X6 Pro Wireless Lavalier Microphone System User Manual

1. Introduction

The FULAIM X6 Pro is a professional-grade wireless lavalier microphone system designed for high-quality audio recording. This system includes four transmitters and a receiver, housed in a convenient charging case. It is compatible with a wide range of devices, including smartphones (iPhone, Android), tablets, and cameras, making it suitable for various applications such as video recording, vlogging, interviews, and live streaming. The X6 Pro features 48kHz/24bit audio capture, intelligent noise cancellation, and real-time monitoring capabilities to ensure clear and reliable sound.

2. Package Contents

Verify that all items listed below are present in your package:

• 4 x FULAIM X6 Pro Transmitters (TX)
• 1 x FULAIM X6 Pro Receiver (RX)
• 1 x Charging Case
• 1 x 3.5mm Camera Cable
• 1 x Type-C Adapter
• 1 x Lightning Adapter
• 1 x Charging Cable
• 4 x Windscreens
• 4 x Magnets
• 1 x User Manual (this document)

Image: All components included in the FULAIM X6 Pro Wireless Lavalier Microphone System package, including four transmitters, one receiver, charging case, various adapters, cables, windscreens, and magnets.

3. Product Features

• High-Quality Audio Recording: 48kHz/24bit audio format for detailed sound capture.
• Intelligent Noise Cancellation: Enhances vocal clarity by reducing background noise.
• Four Transmitters System: Allows simultaneous use of up to four microphones for multi-person recordings.
• Wide Compatibility: Includes iPhone, Type-C, and 3.5mm adapters for broad device support.
• Extended Wireless Transmission Range: Up to 328 feet for flexible movement.
• Real-Time Monitoring: 3.5mm monitoring port and TFT screen on the receiver for live audio and status checks.
• Dual Audio Input Modes: Mono and Secure Audio Track options for recording flexibility.
• Portable Design: Compact transmitters with clip and magnetic attachment options.
• Long Battery Life: Up to 9 hours per microphone on a single charge, extended with charging case.

4. Component Identification

4.1. Transmitter (TX)

Image: Close-up of a FULAIM X6 Pro Transmitter showing the power button, mute button, and noise cancellation button.

• Power Button: Click to mute/unmute. Hold to power on/off.
• Noise Cancellation Button: Click to cycle through Noise Cancellation Level 1, Level 2, or off.
• Built-in Microphone: Captures audio.
• Charging Port: USB-C port for charging.
• Clip/Magnetic Attachment: For securing the transmitter to clothing or magnetic surfaces.

4.2. Receiver (RX)

Image: FULAIM X6 Pro Receiver mounted on a camera, displaying the TFT screen with audio levels and connection status, and highlighting the volume/mode and low cut/power buttons.

• TFT Display Screen: Shows volume level, pairing status, signal strength, battery power, and output mode (Mono/MS).
• Volume Adjustment / Mode Switching Button: Click to adjust volume. Hold to switch between Mono and Secure Audio Track (MS) modes.
• Low Cut / Power Button: Click to turn low cut filter on/off. Hold to power on/off.
• 3.5mm Monitoring Port: For real-time audio monitoring with headphones.
• Output Port: Connects to recording device (camera, phone, tablet).
• Charging Port: USB-C port for charging.

4.3. Charging Case

Image: The FULAIM X6 Pro charging case open, showing the receiver and four transmitters docked inside, along with various adapters and cables.

• Charging Slots: Dedicated slots for the receiver and four transmitters.
• Battery Indicators: LEDs on the case indicate its charging status and remaining power.
• USB-C Charging Port: For recharging the case itself.

5. Setup

5.1. Initial Charging

1. Place all transmitters and the receiver into the charging case.
2. Connect the charging case to a USB power source using the provided USB-C charging cable.
3. Ensure all units are fully charged before first use. The charging case indicators will show charging status.

5.2. Pairing

The FULAIM X6 Pro system is designed for automatic pairing. When the transmitters and receiver are powered on, they should automatically connect. If pairing does not occur:

• Ensure both transmitters and receiver are sufficiently charged.
• Power off and then power on all units.
• Refer to the receiver's TFT display to confirm connection status (indicated by signal strength bars).

5.3. Connecting to Recording Devices

Image: Diagram illustrating the FULAIM X6 Pro's compatibility with Android/Type-C phones, iPhones/iPads with Lightning, and DSLR cameras, showing the necessary adapters for each.

1. For Cameras: Use the provided 3.5mm camera cable to connect the receiver's output port to your camera's microphone input.
2. For iPhone/iPad (Lightning Port): Attach the Lightning adapter to the receiver's output port, then plug it into your iPhone/iPad.
3. For Android/Other Devices (USB-C Port): Attach the Type-C adapter to the receiver's output port, then plug it into your device.
4. For Laptops/Computers: Depending on your computer's ports, use the appropriate adapter (USB-C or 3.5mm) to connect the receiver.

6. Operating Instructions

6.1. Power On/Off

• Transmitter (TX): Hold the power button for 2 seconds to power on or off.
• Receiver (RX): Hold the Low Cut / Power button for 2 seconds to power on or off.

6.2. Noise Cancellation

Image: A FULAIM X6 Pro transmitter with sound waves illustrating the effect of one-click noise cancellation, making voice clear and clean.

On the transmitter, click the dedicated Noise Cancellation button to activate or adjust the noise reduction level. There are typically two levels of noise cancellation (Level 1, Level 2) and an off setting. Select the appropriate level based on your recording environment to minimize background noise.

6.3. Mute Function

Image: Two FULAIM X6 Pro transmitters in mid-air, highlighting the mute switch for preventing recording accidents.

On the transmitter, a single click of the power button will mute or unmute the microphone. This allows for quick audio control during recording without stopping the entire process.

6.4. Volume Adjustment and Audio Modes

Image: Close-up of the FULAIM X6 Pro receiver's TFT display, showing real-time volume levels, pairing status, signal strength, and power for multiple transmitters, along with the selected audio mode (Mono).

• Volume Adjustment (Receiver): Click the Volume Adjustment / Mode Switching button on the receiver to cycle through volume levels.
• Audio Modes (Receiver): Hold the Volume Adjustment / Mode Switching button to switch between Mono and Secure Audio Track (MS) modes.
• Mono Mode: Combines all audio inputs into a single channel.
• Secure Audio Track (MS) Mode: Records two separate audio tracks, one at the standard level and one at a lower backup level, to prevent clipping.

6.5. Real-Time Monitoring

Image: A person wearing headphones connected to the FULAIM X6 Pro receiver, which is attached to a smartphone on a tripod, demonstrating real-time audio monitoring.

Connect headphones to the 3.5mm monitoring port on the receiver to listen to the audio being recorded in real-time. This allows you to verify sound quality and make adjustments as needed during a recording session.

6.6. Attaching Transmitters

Image: A FULAIM X6 Pro transmitter clipped onto a person's shirt collar, demonstrating its compact size and discreet placement.

Image: A FULAIM X6 Pro transmitter magnetically attached to a person's jacket lapel, illustrating the magnetic attachment method.

The transmitters can be attached to clothing using the integrated clip or the included magnets for discreet placement. Ensure the microphone is positioned to capture the speaker's voice clearly.

6.7. Charging While Recording

Image: Two women playing guitars and singing, with a smartphone on a tripod connected to the FULAIM X6 Pro receiver, which is also connected to a charging cable, demonstrating the ability to charge the phone while recording.

The receiver's output port can also be used to charge your connected smartphone or tablet while recording, ensuring uninterrupted long recording sessions.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the devices. Avoid using liquids or abrasive cleaners.
• Storage: Store the system in its charging case when not in use to protect it and keep it charged.
• Battery Care: For optimal battery life, avoid fully discharging the units frequently. Recharge regularly. If storing for extended periods, charge to approximately 50% every few months.
• Windscreens: Replace windscreens if they become damaged or worn to maintain optimal audio quality.

8. Troubleshooting

• No Sound/Low Volume:
  • Check if transmitters and receiver are powered on and paired (indicated by signal strength on RX display).
  • Ensure the receiver is correctly connected to your recording device.
  • Adjust the volume level on the receiver and your recording device.
  • Check if the transmitter is muted (single click of power button).
• Poor Audio Quality/Static:
  • Ensure transmitters are within the effective wireless range (up to 328 feet) of the receiver.
  • Activate noise cancellation on the transmitter to reduce background noise.
  • Check for strong electromagnetic interference sources nearby.
  • Ensure windscreens are properly installed in windy conditions.
• Device Not Recognized:
  • Verify the correct adapter (Lightning, Type-C, 3.5mm) is being used for your device.
  • Ensure the adapter is fully inserted into both the receiver and your recording device.
  • Restart both the microphone system and your recording device.
• Short Battery Life:
  • Ensure all units are fully charged before use.
  • Check the battery indicators on the receiver and charging case.
  • Battery performance can decrease over time with repeated charging cycles.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact FULAIM directly or refer to the official FULAIM website. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the FULAIM store for more information: FULAIM Store on Amazon