Flashback Events offers DJ and stage lighting, including RGBW moving heads, spider beam fixtures, lasers and strobes for parties, performances and event lighting.
Flashback Events lighting manuals cover DJ, party and stage fixtures, including RGBW moving heads, six-arm spider beam lights, laser effects and strobes.
Find model-specific guidance for setup, DMX addressing, automatic and sound-active modes, remote controls and troubleshooting. Check the model number on your fixture before using a guide, as specifications and channel assignments vary.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model number on your fixture to the manual title. Listed models include FBE-BE6KK, FBE-BE6KK-LS, FBE-SB6151, FBE-SB441 and YSH-503.
Select Addr on the control panel, use UP or DOWN to choose the address, then press ENTER to save. Consult the model-specific manual for its channel assignments.
According to the provided instructions, when the display is set to A001, a flashing A indicates an active DMX input; a solid A indicates no signal detected.
For FBE-BE6KK remote-controlled master/slave setups, the instructions specify disabling the infrared receiver using irC OFF on slave units and leaving it enabled only on the main unit.
No verified official warranty, registration or support contact is available in the supplied information. Check the documentation included with your fixture or contact the seller for assistance.