AWESAFE specializes in aftermarket automotive electronics, including Android car stereos, GPS navigation systems, and vehicle-specific infotainment upgrades.
AWESAFE is a manufacturer of automotive electronics designed to modernize driving experiences through advanced infotainment systems. The brand is best known for its range of vehicle-specific Android head units that seamlessly integrate with popular models from manufacturers such as Ford, Jeep, Toyota, Honda, and Volkswagen. These units typically feature high-definition touchscreens, built-in GPS navigation, and support for wireless Apple CarPlay and Android Auto.
Beyond basic media playback, AWESAFE systems often include Digital Signal Processing (DSP) for enhanced audio quality, support for factory steering wheel controls, and integration with backup cameras. The company focuses on providing plug-and-play solutions that allow users to upgrade their vehicle's technology without sacrificing original dashboard aesthetics or functionality.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To restore factory settings, typically navigate to Settings > Car Settings > Factory directly. The factory passcode is often '000000'. Select 'Erase all data' to complete the reset.
Check if the AMP Control cable is connected properly if your vehicle has a factory amplifier. If the issue persists, try resetting the unit to factory settings.
Turn on Wi-Fi and Bluetooth on your phone, pair your phone via Bluetooth to the car radio, and then open the 'Zlink5' (or similar) app on the head unit. The connection should establish automatically.
Ensure the Canbus cable is connected securely. You may also need to select the correct Canbus protocol in Settings > Car Settings > Factory (code 000000) > Car Type Setting to match your specific vehicle model.
This usually happens when the reversing detection is triggered but no camera is installed. Go to Settings > Car Settings > Factory (code 000000) and turn off the 'Reversing detection' option.