VOYAGER316 Android Car Radio
“
Product Information
Specifications:
- Product: ChipXT
- Product Model: VOYAGER316
- Host Interface: Canbus
- Accessories: RCA Cable, Power Cable, USB Cables, Rear Camera
Input Cable, Radio Antenna, GPS Antenna
Product Usage Instructions
Accessories Connection:
Connect the various cables and antennas to their corresponding
ports as per the provided diagrams.
Rearview Camera Installation:
To install an aftermarket rearview camera, connect the black
cable to GND and the red cable to the backup light +.
Power Cable Connection:
If there is no sound, ensure the cables are connected as shown
in the provided photo.
Compatible Vehicle Model Protocol Options:
Adjust Canbus settings in Settings – Car Settings – Factory –
CarType Setting based on your vehicle model.
Steering Wheel Control:
If steering wheel control is not working, ensure Canbus and
Canbus cable are connected correctly. Select the correct
Canbus-type and learn the control buttons.
Display Issues:
If vehicle information is not displayed completely, check Canbus
and Canbus cable connections. Ensure correct Canbus-type
selection.
FAQ
Machine Setup and Configuration:
Q: How can I change KM to MPH?
A: Go to Settings – Car settings – Factory – Speed unit.
Q: How to change temperature from Celsius to
Fahrenheit?
A: Navigate to Settings – Car settings – Factory – CAN related
settings – Temperature unit.
Q: How to turn off the reverse line?
A: The camera’s built-in guidelines cannot be turned off, while the
radio’s guidelines can be disabled.
“`
Product ChipXT Product ModelVOYAGER316
Host Interface Definition
1
RCA Cable
2
Power Cable
3
Canbus Cable
4
USB Cable(4Pin)
5
Rear Camera Input Cable(10Pin)
6
Radio Antenna
7
GPS Antenna
8
USB Cable(6Pin)
Accessories Connection Diagram
4 USB cable(4Pin)
5
Rear Camera Input Cable(10Pin)
6 Radio Antenna
7 GPS Antenna
8 USB cable(6Pin)
RCA Cable Definition
RCA Cable
1 AMP Control Cable
6 AUX Out,Video Output
2 AUX LIN,Audio Input Left
7 AUX VIN,Video Input
3 AUX RIN,Audio Input Right 8 AUX VIN2,Video Input
4 RCA FL,Audio Output Left
9 Sub,Subwoofer Output
5 RCA FR,Audio Output Right 10 Mic,Microphone Port 1 2 3
45
6 7 8 9 10
Rearview Camera Connection Diagram
Q How to install an aftermarket rearview camera? (Note: Some models do not include a pre-installed rearview camera. Please place an additional order if required.)
A Connect the wiring according to the diagram below:
Connected
Black cable is connected to the “GND” Red cable is
connected to the backup light “+”
Power Cable Connection Diagram
Q Why there is no sound coming out? A Please connect the cable as the photo show
Q Does it support factory backup camera? A Yes,but you need buy a adapter,please search the asin:B0F4K69GTF
(for US customers),B0F4K69GTF (for CA Customers).
Q Does it support factory DVD Player? A Sorry it does not support factory DVD Player.
Q After 2 months of use, why suddenly there is no sound? A Please put the car radio back to factory settings:
Settings-Car Settings->Factory(code:000000)->Erase all data(factory reset)
Q How to secure to the Jeep then getting the dash back in place over the 10″ screen?
A The frame for the radio is connected to the radio already, you have to pull it off before
you install the radio.
Compatible Vehicle Model Protocol Options
Canbus setting: please enter Settings Car Settings Factory(code:000000)-CarType Setting-Simple-Soft-Chrysler/Jeep-Grand Cherokee-Chrysler 2010 Grand Cherokee (GRANDCHEROKEE_XP02)
Q Why is the steering wheel control not working? A 1. Please first check whether the Canbus and the Canbus cable (8P Cable) are connected to
the device. 2. Please check if you select the Canbus-type correctly. 3. Please try to learn the control button.cOnly for low-level configuration car models,the power
harness without canbus box SettingsCar SettingsGeneralSWC (SWC setting surface) click OK Touch the corresponding function of the control button on the touchscreen. Press the desired control button on your steering. If the control buttons on the radio screen change colour, learning is successful.
Q Why is the vehicle information not displayed completely? A 1. Please first check whether the Canbus and the Canbus cable (8P Cable) are connected
to the device. 2. Please check if you select the Canbus-type correctly.
FAQ on Machine Setup and Configuration
Q How can i change KM to MPH? A Please enter SettingsCar settingsFactory(code:000000)Speed unit
Q How to change the temperature from Celsius to Fahrenheit? A Please enter the SettingsCar settingsFactory(code:000000)CAN related settings
Temperature unit
Q How to turn off the reverse line? A The camera’s built-in guidelines cannot be turned off, while the radio’s guidelines can be
turned off. Please enter the SettingsCar SettingsGeneral-Reverse lineoff.
Q Why is the trajectory line not displayed when reversing? A Please enter settingsCar settingsGeneralDynamic reversing auxiliary line switch(ON)
/Reverse line(ON)
Q Why the sound is muffled? A Turn off surround and start with level settings on car settings then use the DSP equalizer in
small increments.
Q How to restore factory settings? A Please enter settingscar settingsfactoryccode:000000)Erase all data
Q How to update the firmware? A Method:
1. Connect the car radio to the hotspot of your cell phone or to your home wifi. 2. Enter SettingsSystemAbout deviceWireless updateCheck for update
Q How to use wireless apple carplay? A Turn on the wifi on your cell phone
Please connect the bluetooth of your cell phone to the car radio Go into the “zlink5” app. Please see the video as a reference: https://youtu.be/CqC4V8Rn_R0
Q How to use wireless android auto? A Be sure you have install the “android auto” app in your cell phone.
Turn on the wifi on your cell phone Please connect the bluetooth of your cell phone to the car radio Go into the “zlink5” app. Please see the video as a reference: https://youtu.be/BJdfs4cZh3o
FAQ on Machine Troubleshooting
Q When connected to Carplay/Android Auto, it freezes, delays, disconnects frequently, intermittent sound?
A Please reinstall the zlink app (send message to our email :carradio-service@outlook.com
and we will send the apk to you)
Q Zlink app is now gone how do i install the zlink app? A Please reinstall the zlink app (send message to our email :carradio-service@outlook.com
and we will send the apk to you) Method: 1Download the zlink app by computer first 2Copy it to a flash drive 3Insert the flash drive to the usb cable of the car radio 4Enter the “file manager” of the car radio and then install the zlink app.
Q Why did the music stop when reversing? A When using zlink, the music will automatically pause when you reverse, and this can not be
changed. However, when you use Bluetooth to play music, you can adjust it to not pause. Please enter SettingsCar settingsSoundMedia volume when reversingoff
Q Buttons on the left side don’t work? A Please enter SettingsCar settingsFactory(code:000000)Touch learning First click”-
Calibration”, and then press the button on the screen,after that press the corresponding touch key on the left to complete the learning.
Q Why does the touch screen suddenly stop working? A Please reset through RST first and perform touch screen calibration (place all five fingers on
the blank space of the screen until the screen calibration screen appears, and click the cross pointer to complete the calibration). If the issue cannot be resolved, please send a calibration video to our email.
Q Why can not save the time setting? A Please enter the SettingsCar settingsSystemDate&timeAutomatic date & time
Use GPS provided time After selecting this option, once a GPS signal is received, the time will be synchronized correctly. Therefore, it is recommended to place the GPS module in an unobstructed location for faster signal reception.
Q Why is the original car’s reverse radar unable to display? A Please enter SettingsCar settingsFactory(code:000000)Can Related Settings
Radar display(default) After that please reboot the machine (pull down the status bar, click the “power” icon to reboot the device and save the configuration) Note: Do not change other factory settings to avoid rendering certain functions unusable.
Q Why the other person can not hear my voice clearly when make the phone call via bluetooth?
A Please connect the external microphone that comes with the device to the MIC cable of the
RCA cable and place it closer to you, such as put it on the driver’s sun visor.
Q Why does the machine screen suddenly turn black and a robot pattern appears?
A This may be because you have not installed a reversing camera and triggered the reversing
detection function. Please enter SettingsCar SettingsFactory SettingsEnter the code 000000Scroll down to find the reversing detection buttonclick Close.
Q Why does the car stereo not turn on after using it for a while?
A Use a tester to measure the voltage of the following wires when starting the car:
* Voltage between ACC wire (red wire) and GND (black wire): ACC+GND=?V * Voltage between B+ wire (yellow wire) and GND (black wire): B++GND=?V Finally, please send the measured voltage value to: carradio-service@outlook.com (attach the order number) for further solutions.
Installation Support & Community Contribution
Apologies for any inconvenience. Due to the wide range of products we offer, detailed installation videos for certain models — including this one — are currently unavailable. If you encounter any installation challenges, please contact our technical team via carradio-service@outlook.com. Our engineers will provide dedicated support to ensure a seamless setup.
Should you have created a clear, user-friendly installation video during the process, we warmly welcome you to share it with our community. Such practical insights could significantly enhance other users’ installation experiences.We invite you to submit it to carradio-service@outlook.com.
Submitted content may be featured in our official knowledge base (with full attribution to you).
Thank you for being an essential part of our user ecosystem!
Customer Protection Policy & Technical Support Commitment
1. Return & Warranty Coverage 30-Day Risk-Free Returns: Full refunds or replacements for any reason within 30 days of deliver 12-Month Limited Warranty: Manufacturer defects coverage commencing from purchase date 2. Priority Technical Support For operational issues or warranty claims, contact: Dedicated Support Channel: carradio-service@outlook.com Service Level Agreement (SLA): Weekdays (Mon-Fri): Response within 24 hours Weekends/Holidays: Response within 48 hours 3. Critical Reminder Should our reply be delayed beyond stated SLAs: Verify spam/junk folders for misdirected responses Resend inquiry with urgency tag “[Escalation]” in subject line
Documents / Resources
 |
AWESAFE VOYAGER316 Android Car Radio [pdf] User Manual VOYAGER316, VOYAGER316 Android Car Radio, Android Car Radio, Car Radio |