XP Power PPT30 Analog Programming Option
FAQ
imibuzo ejwayelekile ukubuzwa
- Q: Ngiwaxhuma kanjani ama-potentiometer angaphandle we-voltage kanye nezilungiselelo zamanje?
- A: Sebenzisa amasiginali e-analog ajwayelekile (0-10V) ngokusebenzisa isokhethi evikelekile ye-Sub-D kuphaneli engemuva. Qinisekisa ukubeka phansi okufanelekile kanye nesivikelo sokuphepha.
- Q: Kwenzekani uma ikhebula lesixhumi esibonakalayo sohlelo lwe-analog linqanyulwa phakathi nokusebenza?
- A: Kumodi ye-ANALOG, ivolumu yokuphumayotagingahle yehlele ku-0V ngemva kwesikhathi esithile kuye ngomthwalo. Ukuxhuma kabusha ikhebula ngaphandle kokushintsha izilungiselelo kuzobuyisela amanani esethi okugcina.
Le manuwali yakhiwe ngu: XP Power FuG, Am Eschengrund 11, D-83135 Schechen, Germany
Inketho ye-Analog Programming
Okujwayelekile
I-analog interface (15-pole Sub-D isokhethi kuphaneli elingemuva) isetshenziselwa ukulawula imisebenzi voltagi-e, ukulungiselelwa kwamanje kanye ne-UNIT ON CMD (UKUPHUMA KUVULIWE/KUVALIWE) nemisebenzi ekhethekile, kuye ngohlobo lweyunithi. Amanani angempela amanje anikezwa njenge-analog voltages kanye nezindlela zakamuva zokulawula njengamasignali edijithali.
Sicela ubheke ngaphezuluview ngohlelo lwe-analog, bona i-1.3.
I-interface itholakala kuphaneli elingemuva le-DC power supply.
Isexwayiso: Lesi sixhumanisi singaba mahhala kuze kube umkhawulo. 350V.
Ukwehluleka ukukubona lokhu kungase kubangele ukushaqeka kukagesi nge-interface!
Umsebenzi
- VoltagI-e neyamanje ingasethwa ngamasignali e-analog ajwayelekile (0-10V), ngama-potentiometer angaphandle.
- Ireferensi voltagI-e ka-+10V noma amanani asethiwe angalethwa ngenye ivolumu yangaphandletage imithombo (xhuma i-0V!).
- Izimpawu ze-analog ze-voltage kanye nendawo yamanje kanye ne-voltagI-e kanye nabaqaphi bamanje bahlukaniswe ngamandla namandla okukhiphayo ngokuzihlukanisa ampabagibeli.
- Amasignali edijithali ahlukaniswa ngama-optocouplers.
Ikhebuli yesiginali nokulawula
- Isixhumi esibonakalayo se-analog sisetshenziswa kusetshenziswa isokhethi ye-Sub-D evikelekile. Isihlangu sixhunywe kumandla ezindlu (PE). Isixhumi sokukhwelana, kanye nesixhumanisi sedatha, kufanele kuvikelwe futhi izihlangu kufanele zixhunywe komunye nomunye. Ubude obuvunyelwe bekhebula elivikelekile bungama-3m.
- Lezi ziyizimfuneko zokuthobela i-electromagnetic compatibility (EMC), bheka futhi Isimemezelo Sokuvumelana kusithasiselo.
Uphawu olukhomba
- Ungakwazi ukubona le nketho ngesitikha esithi “FLOATING PROGRAMMING” kusixhumi esibonakalayo kuphaneli engemuva.
- Ngaphambi kokuthi idivayisi iqale ukusebenza, kufanele kuxhunywe isixhumi esibonakalayo sohlelo lwe-analog.
- Ngemuva kokuthi ukuthunyelwa kwenzekile futhi nokulawula kwangaphandle kuyasebenza, i-ANALOG LED iyakhanyisa.
- Idivayisi manje isisetshenziswa ngaphandle ngesokhethi yokuhlela. VoltagI-e neyamanje ingacaciswa ngamasignali ajwayelekile e-analogue (0-10V) noma ngama-potentiometer angaphandle.
Voltage umkhawulo
- IVoltagumkhawulo we-e, olungiseka nge-potentiometer V-LIMIT kuphaneli yangaphambili yomthombo wamandla we-DC, isasebenza.
Ukusetshenziswa kabi okubonakalayo uma usebenzisa uhlelo lwe-analog
Isexwayiso: Ingozi yokushaqeka kukagesi ekuphumeni kwamandla!
Uma idivayisi isebenza ngemodi ye-ANALOG futhi ikhebula lesixhumi esibonakalayo sohlelo lwe-analog liyadonswa, ivolumu yokuphumayotage yehlela ku-0V ngemva kwesikhathi sokukhipha okuncike emthwalweni wokuxhuma.
Uma ikhebula lesixhumi esibonakalayo sohlelo lwe-analog selixhunywe futhi ngaphandle kokushintsha izilungiselelo zesilawuli kude, amanani okugcina asethiwe azoba khona kokuphumayo.
Kuphelileview wohlelo lwe-analog
View yepulaki eseceleni ye-solder  uxhumano lwepulaki: |
|||
| Konke voltagama-e kanye nama-currents acaciswa njenge-DC | 350V amandla amahhala | ||
| Ukuhlukaniswa kokufakwayo kwedijithali nokuphumayo, okokufaka kwe-analog kanye nemiphumela | 350V | ||
| Phina | Incazelo | Uhlobo | Umsebenzi |
| 1 | CC | DO | Izinsiza ze-appr. +15V uma ukunikezwa kwamandla kukumodi yamanje engashintshi. Ilingana ne-LED
CC, uRica. 10kΩ |
|
2 |
CV |
DO |
Ukushaja kuqediwe
Izinsiza ze-appr. +15V uma ukunikezwa kwamandla kuyivolthi engaguqukitage imodi. Ilingana ne-LED CV, Ri ca. 10kΩ |
|
3 |
I-MON |
AO |
Isiginali yokuqapha ephumayo yangempela engu-0…+10V imele u-0...okwamanje okuzisholo |
| Ri ca. 2 kΩ | |||
| 4 | I-VPS | AO | Ayisetshenziswa |
| 5 | IPS | AO | Ayisetshenziswa |
| 6 | 0vd | DI | Indawo ye-digi. amasignali, angase alayishwe okwamanje |
|
7 |
Ayisetshenziswa | kumadivayisi we HCB, MCA, MCP, NLN, NTN series ngaphandle komsebenzi. | |
|
I-POL-SET |
DI | lawula okokufaka kwe-electronic polarity reversal switch (Inketho) POS = iphinikhodi (7) evuliwe,
I-NEG = ixhunywe ku-Pin (6) 0VD |
|
| V/I REG | DI | ukushintshwa kwevoltage/umthethonqubo wamanje usebenza kuphela ku I-NLB uchungechunge
Imodi ye-V-REG: xhuma i-Pin7 ne-Pin6 (Pin7=0), Imodi ye-I-REG: I-Pin7 ayixhunyiwe |
|
| 8 | I-V-SET | AI | 0…+10V izilawuli 0…ivolumu yegamatage
Ukumelana nokokufaka ku-0V appr. 0v ca. 10MOhm |
| 9 | 0V | A-GND | Indawo yezimpawu ze-analog, akufanele iphathe noma iyiphi yamanje |
| 10 | +10V REF | AO | +10V Reference (Okukhiphayo), ubuningi obulayishwe manje. 2mA |
|
11 |
V-MON |
AO |
Umthamo wangempela ophumayotagI-e yokuqapha isignali.0…+10V imele u-0…ivolumu yegamatage |
| Ri ca. 2 kΩ | |||
| 12 | OKUPHUMA KUVULIWE | DI | iphinikhodi (12) vula UKUPHUMA = KUVALIWE,
iphinikhodi (12) exhunywe kuphinikhodi ye-0VD (6) = UKUPHUMA KUVULIWE |
|
13 |
Ayisetshenziswa | kumadivayisi we Uchungechunge lwe-MCP ngaphandle komsebenzi. | |
|
Isimo se-POL |
DO |
isimo se-polarity (inketho) sisebenza kumadivayisi aneswishi yokuhlehla ye-polarity.
I-POS polarity = cishe. +12 V, I-NEG polarity = 0 V |
|
| -10V REF | AO | zemishini ye HCB, NLB uchungechunge | |
| I-P-LIM | DO | iletha cishe. +15 V, lapho i Uchungechunge lwe-MCA idivayisi ishayelwa emkhawulweni wamandla, okulingana ne-LED P-LIM kuphaneli yangaphambili | |
| I-S-REG | DO | Idiliva cishe. +15 V, uma I-NTN, uchungechunge lwe-NLN idivayisi ekulawuleni kwe-SENSE (kuphela ngokusebenza kwenzwa okusebenzayo), okulingana ne-LED S-ERR kuphaneli yangaphambili. | |
| 14 | NC | DI | Ayisetshenziswa |
|
15 |
I-SET | AI | 0…+10V ilingana no-0…INenn, ukumelana nokokufaka ngokumelene ne-0V cishe. 10MOhm |
| NC | Ayisetshenziswa | ||
| Wonke amanani we-voltagama-es nama-currents aku-DC. D = Idijithali, A = I-Analog, I = Okokufaka, O = Okukhiphayo NC = Ayisetshenziswa |
|||
Izinketho zocingo
Qaphela
- Ivolumu yangaphandletagukulungiswa kwe-e kudinga futhi izintambo zesilawuli samanje futhi ngokuphambene nalokho.
- Ireferensi voltagU-e ka-+10V noma amanani ajwayelekile angavela kwenye ivolumu yangaphandletage imithombo. (xhuma i-0V).
- Umyalo ON/OFF (izikhonkwane 12-6) kufanele ube nentambo.
Ukusebenza kwe-analog interface
Isexwayiso: Nika amandla okuthi OUTPUT ON/OFF
- I-DC OUPUT ivulwa ngokuxhuma i-pin 12 kuya ku-pin 6, bona 1.3
- Uma i-DC OUTPUT ivulwa ngoxhumo lwentambo phakathi kwephinikhodi 12 kanye nephinikhodi 6, i-OUTPUT ihlala isebenza kuze kube yilapho uxhumano phakathi kwephinikhodi 12 ne-pin 6 luvuliwe noma kushintshwa amapayipi amakhulu.
- Uma kwenzeka i-mains voltage ukwehluleka, i-DC OUTPUT ihlala ivuliwe. Ngokushesha lapho amapayipi amakhulu voltage iyahlinzekwa futhi, i-DC OUTPUT iyasebenza futhi!
Isexwayiso: Ukushaqeka kukagesi kungenzeka ngenxa yevolumu eseletage kokuphumayo!
- Uma iyunithi ishintshwa noma uma kwenzeka kuba nokuphela kwamandla, i-residual voltagI-e / yamanje NGEKE iboniswe kokuphumayo kokuqapha!
- Qaphela isikhathi sokukhishwa!
Ukubeka inketho ye-analog programming / interface ekusebenzeni
- Ukufakwa kwesixhumi esibonakalayo se-analog kumele kwenziwe kuphela lapho ugesi we-DC ungasebenzi!
- I-interface yeyunithi yokulawula izoxhunywa kusixhumi esibonakalayo sokuphakelwa kukagesi kwe-DC njengoba kucacisiwe.
- Manje vula iswishi YAMANDLA (1).
- Setha iswishi ye-REMOTE kuphaneli engaphambili ukuthi IVULIWE. Uma i-interface eyengeziwe yedijithali itholakala setha ukushintshela ku-ANALOG. I-ANALOG LED isikhanyisiwe.
Ukuze ushintshe i-oT yokunikezwa kwamandla, qhubeka kanje:
- Setha amanani ephinikhodi (8) V-SET kanye nephinikhodi (12) I-SET ku-0V.
- Vula iphinikhodi (12), iyala UKUPHUMA OFF
- Ngemva kokuphuma kwevolumutagi-e ifinyelele inani elingu-<50 V, shintsha idivayisi ngokuphelele yokusebenzisa inkinobho YAMANDLA.
- Ukunikezwa kwamandla kwe-DC kuvaliwe.
Amadokhumenti / Izinsiza
 |
XP Power PPT30 Analog Programming Option [pdf] Incwadi Yeziqondiso Inketho yokuhlela ye-PPT30, i-PPT30, i-Analog Programming Option, i-Programming Option, inketho |
