XP Simba PPT30 Analog Programming Option
FAQ
Mibvunzo Inowanzo bvunzwa
- Q: Ndinobatanidza sei ekunze potentiometers yevoltage uye zvigadziriso zvazvino?
- A: Shandisa yakamisikidzwa analog masaini (0-10V) kuburikidza neyakavharidzirwa Sub-D socket pane yekumashure panhi. Iva nechokwadi chekugadzika kwakakodzera uye kudzivirira kuchengetedza.
- Q: Chii chinoitika kana analog programming interface tambo ikabviswa panguva yekushanda?
- A: Mune ANALOG modhi, iyo yakabuda voltage inogona kudonha kusvika ku0V mushure meimwe nguva zvichienderana nemutoro. Kubatanidza zvakare tambo pasina kushandura marongero kunodzoreredza yekupedzisira seti kukosha.
Bhuku iri rakagadzirwa ne: XP Power FuG, Am Eschengrund 11, D-83135 Schechen, Germany
Analog Programming sarudzo
General
Iyo analog interface (15-pole Sub-D socket pane yekumashure mapaneru) inoshandiswa kudzora mabasa vol.tage kuseta, ikozvino kugadzika pamwe neUNIT ON CMD (OUTPUT ON / OFF) uye akakosha mabasa, zvichienderana nemhando yeyuniti. Ikozvino kukosha chaiko kunopihwa seanalogi voltages uye azvino kudzora modhi semasaini edhijitari.
Ndapota tarisa kune pamusoroview yeanalog programming, ona 1.3.
Iyo interface iri pane reshure remagetsi eDC magetsi.
Yambiro: Iyi interface inogona mahara kusvika max. 350V.
Kutadza kuona izvi kunogona kukonzera kuvhunduka kwemagetsi kuburikidza neiyo interface!
Function
- Voltage uye ikozvino inogona kuiswa neyakagadzika analogi zviratidzo (0-10V), nekunze potentiometers.
- Chirevo voltage ye +10V kana iyo yakatarwa inogona kupihwa neimwe nzira yekunzetage masosi (batanidza 0V!).
- Analogi zviratidzo zvevoltage uye ikozvino setpoint pamwe nevoltage uye vatariri vemazuva ano vakaparadzaniswa negomba kubva kune inobuda inogona kuburikidza nekuzviparadzanisa nevamwe amplifiers.
- Digital masaini akaparadzaniswa kuburikidza ne optocouplers.
Chiratidzo uye tambo yekudzora
- Iyo analog interface inoshandiswa kuburikidza neyakavharidzirwa Sub-D socket. Iyo nhoo yakabatana neiyo imba inogona (PE). Iyo yekubatanidza yekubatanidza, pamwe neye data data, inofanirwa kuchengetedzwa uye nhovo dzinofanirwa kubatanidzwa kune mumwe nemumwe. Urefu hunobvumirwa hurefu hwetambo yakavharidzirwa ndeye 3m.
- Izvi ndizvo zvinotarisirwa kuti zvitevedzerwe nemagetsi emagetsi kuenderana (EMC), onawo Chiziviso cheKuenderana mune appendix.
Chiratidzo chekuziva
- Unogona kuziva iyi sarudzo nechinamira "FLOATING PROGRAMMING" pane chinongedzo chekubatanidza pane yekumashure.
- Chigadzirwa chacho chisati chaiswa mukushanda, iyo analog programming interface inofanira kubatana.
- Mushure mekunge kutumwa kwaitika uye kutonga kwekunze kuri kushanda, iyo ANALOG LED inovhenekera.
- Chishandiso chave kushandiswa kunze kuburikidza nesoketi yepurogiramu. Voltage uye zvazvino zvinogona kutsanangurwa neakamisikidzwa analogue masaini (0-10V) kana nekunze potentiometers.
Voltage limitation
- Iyo voltage kugumira, inogadziriswa neiyo potentiometer V-LIMIT pane yepamberi yemagetsi DC magetsi, ichiri kushanda.
Kushandiswa zvisirizvo kana uchishandisa analog programming
Yambiro: Ngozi yekuvhunduka kwemagetsi pamagetsi emagetsi!
Kana chishandiso chiri kushanda muANALOG modhi uye analog programming interface tambo inodhonzwa, iyo inobuda voltage inodonha kusvika ku0V mushure menguva yekuburitsa iyo zvinoenderana nemutoro wekubatanidza.
Kamwe iyo analog programming interface tambo yakavharirwa mukati zvakare isina kushandura kuremote control marongero, yekupedzisira seti yakakosha ichave iripo pane zvinobuda.
Overview yeanalog programming
View ye solder side plug  plug yekubatanidza: |
|||
| Zvose voltages uye mafungu anotsanangurwa seDC | 350V inogona mahara | ||
| Kusarudzika kwezvipimo zvedhijitari uye zvinobuda, mapipu eanalogi uye zvinobuda | 350V | ||
| Pin | Tsanangudzo | Type | Function |
| 1 | CC | DO | Supplies appr. + 15V kana magetsi ari mumodhi yenguva dzose. Kufanana ne LED
CC, Ri ca. 10kΩ |
|
2 |
CV |
DO |
Kuchaja kwapera
Supplies appr. + 15V kana magetsi ari mumhepo inogara iri voltage mode. Kufanana ne LED CV, Ri ca. 10kΩ |
|
3 |
I-MON |
AO |
Chaiyo chinobuda parizvino chekutarisa chiratidzo 0…+10V inomiririra 0…zita razvino |
| Ri ca. 2kΩ | |||
| 4 | VPS | AO | Haina kushandiswa |
| 5 | IPS | AO | Haina kushandiswa |
| 6 | 0VD | DI | Ground for digi. masigns, anogona kunge ari azvino akaremerwa |
|
7 |
Haina kushandiswa | zvemidziyo ye HCB, MCA, MCP, NLN, NTN series pasina basa. | |
|
POL-SET |
DI | kudzora kupinza kwemagetsi polarity reversal switch (Sarudzo) POS = pini (7) yakavhurika,
NEG = yakabatana nePini (6) 0VD |
|
| V/I REG | DI | switchover voltage/zvino mutemo unoshanda chete kune iyo NLB series
V-REG modhi: batanidza Pin7 nePin6 (Pin7 = 0), I-REG modhi: Pin7 isina kubatana |
|
| 8 | V-SET | AI | 0…+10V inodzora 0…zita rezwitage
Kupinza kuramba kune 0V appr. 0v ca. 10MOhm |
| 9 | 0V | A-GND | Ground yeanalogi zviratidzo, haifanirwe kutakura chero ikozvino |
| 10 | +10V REF | AO | +10V Reference (Output), ikozvino yakatakura max. 2mA |
|
11 |
V-MON |
AO |
Actual output voltage monitor sign.0…+10V inomiririra 0…nominal voltage |
| Ri ca. 2kΩ | |||
| 12 | OUTPUT ON | DI | pini (12) vhura OUTPUT = DZIMA,
pini (12) yakabatana ne0VD pin (6) = OUTPUT ON |
|
13 |
Haina kushandiswa | zvemidziyo ye MCP series pasina basa. | |
|
POL-Status |
DO |
polarity chimiro (sarudzo) inoshanda kune zvishandiso zvine polarity reversal switch.
POS polarity = approx. +12 V, NEG polarity = 0 V |
|
| -10V REF | AO | zvezvishandiso zve HCB, NLB nhepfenyuro | |
| P-LIM | DO | inopa approx. +15 V, apo the MCA series mudziyo unofambiswa mumagetsi emagetsi, akaenzana ne LED P-LIM pane yepamberi | |
| S-REG | DO | Inoendesa approx. +15 V, kana NTN, NLN series mudziyo muSENSE control (chete ine inoshanda sensor mashandiro), yakaenzana ne LED S-ERR pane kumberi kwepaneru. | |
| 14 | NC | DI | Haina kushandiswa |
|
15 |
I-SET | AI | 0…+10V yakaenzana ne0…INenn, kupinza yekupokana ne0V approx. 10MOhm |
| NC | Haina kushandiswa | ||
| Zvose zvakakosha zvevoltages uye currents zviri muDC. D = Digital, A = Analogi, I = Input, O = Output NC = Haina kushandiswa |
|||
Wiring Options
Cherechedza
- Izwi rekunzetage kugadzirisa kunoda zvakare wiring yekutonga kwazvino uye zvinopesana.
- Chirevo voltage ye +10V kana iwo mazita akakosha anogona neimwe nzira kubva kune mamwe ekunze voltage zvinyorwa. (kubatanidza 0V).
- Murairo we ON/OFF (pini 12-6) unofanira kuva newaya.
Kushanda kweanalog interface
Yambiro: Ita kuti OUTPUT ON/OFF
- Iyo DC OUPUT inobatidzwa nekubatanidza pini 12 kusvika pini 6, ona 1.3
- Kana DC OUTPUT ikabatidzwa newaya yekubatanidza pakati pepini 12 nepini 6, OUTPUT inoramba ichishanda kusvikira kubatanidza pakati pepini 12 nepini 6 kwazaruka kana mainji achinja.
- Pakaitika mains voltaguye kukundikana, iyo DC OUTPUT inoramba yakagoneswa. Pakarepo mains voltage inopihwa zvakare, iyo DC OUTPUT inoshanda zvakare!
Yambiro: Kuvhundutsa kwemagetsi kunobvira nekuda kwekusara voltage pane zvakabuda!
- Kana iyo unit ikachinjirwa kana pakaitika simba rekutadza, residual voltage / yazvino HAICHARATIRWA pane zvemonitor zvinobuda!
- Tarisa nguva yekubuda!
Kuisa iyo analog programming sarudzo / interface mukushanda
- Kuiswa kweanalog interface kunofanirwa kungoitwa kana iyo DC magetsi isiri kushanda!
- Iyo interface yeiyo control unit ichave yakabatana kune iyo interface yeDC magetsi ekupa sezvakatsanangurwa.
- Zvino batidza SIMBA switch (1).
- Seta iyo REMOTE switch kumberi kwepaneru kuti ON. Kana imwe yekuwedzera yedhijitari inowanikwa isa switch ku ANALOG. Iyo ANALOG LED yave mwenje.
Kuti uchinje magetsi oT, enda sezvinotevera:
- Isa hutsika papini (8) V-SET uye pini (12) I-SET ku0V.
- Vhura Pini (12), raira OUTPUT OFF
- Mushure mekubuda voltage yasvika kukosha <50 V, shandura mudziyo zvachose kushandisa SIMBA switch.
- Iyo DC magetsi inodzimwa.
Zvinyorwa / Zvishandiso
 |
XP Simba PPT30 Analog Programming Option [pdf] Bhuku reMirayiridzo PPT30 Analog Programming Option, PPT30, Analog Programming Option, Programming Option, Option |
