ISHO KAHLE PWM-200 Series 200W Constant Voltage I-PWM Output LED Driver Owner's Manual

Ukufakwa:
Qinisekisa ivolumu yokufakatagi-e ingaphakathi kwebanga elishiwo lemodeli oyisebenzisayo.
Xhuma umshayeli we-LED ngokomdwebo wezintambo onikezwe kumanuwali.

Ukufiphala
Lungisa ububanzi bokufiphaza njengoba kudingeka usebenzisa imvamisa ye-PWM eshiwo kumodeli yakho.

Ivula amandla
Faka amandla kumshayeli we-LED futhi uqinisekise ukuthi uzinza phakathi nesikhathi sokubamba esishiwo ekucacisweni.

Ukuxazulula inkinga
Bheka imanuwali yomsebenzisi ngezinyathelo zokuxazulula inkinga uma kuba nezinkinga ngomshayeli we-LED.

Imibuzo Evame Ukubuzwa (FAQ)

Q: Iluphi uhla lokufiphala lwe-PWM-200 series LED driver?
A: Ububanzi bokufiphala busuka ku-0% kuye ku-100% kuwo wonke amamodeli ochungechunge lwe-PWM-200.

Izici

I-vol evamiletagUkukhishwa kwesitayela se-e PWM okuvama ukufika ku-4kHz okuhambisana nomklamo we-IEEEI 789-2015(Uhlobo olungenalutho)

Izindlu zepulasitiki ezine-class 11 kanye ne-PFC design
Isicelo sokukhanyisa izimo eziphuthumayo siyatholakala ngokuya nge-IEC61347-2-13

Ukusetshenziswa kwamandla okulindile
Ihlanganiswe ngokugcwele nezinga le-IP67

Izinketho zomsebenzi: 3 ku-1 dimming (dim-to-off kanye ne-Isolated Design)/DALl-2
Ileveli encane yokufiphala engu-0.2% yohlobo lwe-DA2

Isikhathi sokuphila esijwayelekile > amahora angu-50000 neminyaka emi-5 yewaranti

Izinhlelo zokusebenza

Ukukhanyisa kwe-strip ye-LED

Ukukhanyisa kwe-LED kwangaphakathi
Ukukhanyisa kwe-LED kokuhlobisa

Ukukhanyisa kwezakhiwo ze-LED
Ukukhanyisa kwe-Cove

Izibani zezimboni
Thayipha u-“HL” ozosetshenziswa ekilasini l, u-division 2 indawo eyingozi (ehlukanisiwe).

IKHODI YE-GTIN
Ukusesha kwe-MW: http://www.meanwell.com/serviceGTlN.aspx

Incazelo

Uchungechunge lwe-PWM-200 ingumshayeli we-200W AC/DC LED ofaka ivolthi engaguquki.tagImodi ye-e ephumayo ngesitayela se-PWM, ekwazi ukugcina izinga lokushisa lombala kanye ne-homogeneity yokukhanya lapho ushayela zonke izinhlobo zemigqa ye-LED. I-PWM-200 isebenza kusukela ku-100—305VAC futhi inikeza amamodeli anevolumu ehlukile elinganiselwetagesukela phakathi kuka-12V kanye no-48V. Ngenxa yokusebenza kahle okuphezulu okungafika ku-94% ngomklamo ongena fan, lonke uchungechunge luyakwazi ukusebenza ku--400C +850C icala lokushisa ngaphansi kwe-convection yomoya yamahhala. Lonke uchungechunge lulinganiselwe ngezinga lokuvikela lokungena le-IP67 futhi lifanele ukusebenzela okomile, damp noma izindawo ezimanzi. I-PWM-200 ifakwe umsebenzi wokufiphalisa oshintshayo umjikelezo wemisebenzi wokukhiphayo, ohlinzeka ngokuguquguquka okukhulu kwezinhlelo zokusebenza zemigqa ye-LED.

Ukumiswa kwekhodi kwemodeli

INKCAZO

INDLELA				I-PWM-200-12	I-PWM-200-24	I-PWM-200-36	I-PWM-200-48
OKUPHUMAYO		DC VOLTAGE		12V	24V	36V	48V
		ILINGANISWE NJENGAMANJE		15A	8.3A	5.55A	4.17A
		AMANDLA AKALIWE		180W	199.2W	199.8W	200.1W
		IBANGA LOKUPHIMA		0 ~ 100%
		IZIMPENDULO ZE-PWM (Uhlobo.)		I-4kHz yohlobo olungenalutho; 2.5kHz ohlotsheni lwe-DA2
		UKUMISELA, VUKA ISIKHATHI ^{Inothi. 2}Inothi. 10		500ms, 80ms/230VAC noma 115VAC
		BAMBA ISIKHATHI SOKUPHEZULU (Uhlobo.)		10ms / 230VAC noma 115VAC
INPUT		I-VOLTAGE RANGE Qaphela.3		100 ~ 305VAC 142 ~ 431VDC(Sicela ubhekisele esigabeni esithi “STATIC CHARACTERISTIC”)
		IFREQUENCY RANGE		I-47 ~ 63Hz
		AMANDLA FUTHI (Uhlobo.)		PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ ukulayisha okugcwele(Sicela ubhekisele esigabeni esithi “POWER FACTOR (PF) CHARACTERISTIC”)
		TOTAL IHARMONIC UKUPHAZAMISEKA		THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Sicela ubhekisele esigabeni esithi “TOTAL HARMONIC DISTORTION”)
		UKUSEBENZA (Uhlobo.)		92%	93%	94%	94%
		I-AC CURRENT (Uhlobo.)		2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
		INRUSH CURRENT (Uhlobo.)		COLD START 65A(twidth=55μ0 s measured at 50% Ipeak) at 230VAC; Nge-NEMA 410
		MAX. CHA. yama-PSU ku-16A CIRCUIT BREAKER		amayunithi ayi-3 (i-circuit breaker yohlobo B) / amayunithi angama-5 (i-circuit breaker yohlobo C) ku-230VAC
		UKUVUZA NJENGAMANJE		<0.75mA / 277VAC
		UKUSETSHENZISWA KWAMANDLA AMA-STANDBY		ukusetshenziswa kwamandla kokubekwe eceleni <0.5W lapho kufiphala
UKUVIKELA		LAYISHA		108 ~ 135% amandla okukhiphayo alinganiselwe
				Imodi ye-Hiccup noma umkhawulo wamanje oqhubekayo, ululama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha
		WESIFUNDA ESIFISHANE		Vala i-o/p voltage, vula amandla kabusha ukuze ululame (ngaphandle kohlobo lwe-DA2)Imodi ye-Hiccup,ilulama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha (kuhlobo lwe-DA2 kuphela)
		NGAPHEZU KWE-VOLTAGE		13 ~ 18V	27 ~ 34V	41 ~ 49V	53 ~ 65V
				Vala i-o/p voltage, vula kabusha amandla ukuze ululame ngemva kokususwa kwesimo sephutha
		NGENXA KWETEMPERATURE		Vala i-o/p voltage, vula kabusha amandla ukuze ululame ngemva kokususwa kwesimo sephutha
EZIMO		I-TEMP YOKUSEBENZA.		Tcase=-40 ~ +85℃ (Sicela ubhekisele esigabeni esithi “ OUTPUT LOAD vs TEMPERATURE”)
		MAX. CASE TEMP.		Isikhwama = + 85 ℃
		UKUSEBENZA UKUTHOBEKA		Ama-20 ~ 95% RH angavumeli
		ISITOREJI I-TEMP., UKUTHUMEKA		-40 ~ + 80 ℃, 10 ~ 95% RH
		ISIKHATHI. OKUQINISEKILE		± 0.03% / ℃ (0 ~ 50 ℃)
		UKUDLIZELA		10 ~ 500Hz, 5G 12min./1cycle, isikhathi se-72min. ngayinye ihambisana nezimbazo ezingu-X, Y, Z
UKUPHEPHA & I-EMC		AMAZINGA OKUPHEPHA Inothi. 5		UL8750( uhlobo ”HL”), CSA C22.2 No. 250.13-12; I-ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384independent, IP67, EAC TP TC 004,GB19510.1,GB19510.14, IS15885(Part2/Except13) kuvunywe i-36; Idizayini ibhekisa ku-BS EN/EN60335-1, Ngokusho kwe-BS EN/EN61347-2-13 isithasiselo J esilungele ukufakwa kwezimo eziphuthumayo
		AMAZINGA E-DALI		Ukuthobela i-IEC62386-101, 102, 207, 251 yohlobo lwe-DA2 kuphela, uhlobo lwedivayisi 6(DT6)
		INGABE I-VOLTAGE		I/PO/P: 3.75KVAC; I/P-DA: 1.5KVAC; I-O/P-DA:1.5KVAC
		UKUMELANA UKUZIHLUPHA		I / PO / P: 100M Ohms / 500VDC / 25 ℃ / 70% RH
		EMC UKUVUSELELWA Inothi. 6		Ukuhambisana ne-BS EN/EN55015, BS EN/EN61000-3-2 Ikilasi C (@load≧60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
		UKUVIKELWA EMC		Ukuhambisana ne-BS EN / EN61000-4-2,3,4,5,6,8,11; I-BS EN / EN61547, ileveli yezimboni elula (ukwanda kokuzivikela emzimbeni, i-Line-Line 2KV), i-EAC TP TC 020
ABANYE		MTBF		2235.6K amahora iminithi. I-Telcordia SR-332 (Bellcore) ;178.7K amahora amaminithi. I-MIL-HDBK-217F (25℃)
		DIMENSION		1956839.5mm (LWH)
		UKUPAKA		1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT
QAPHELA		Wonke amapharamitha OKUNGEKHO okushiwo ngokukhethekile akalwa kokokufaka okungu-230VAC, kukalwe okwamanje kanye no-25℃ wezinga lokushisa elizungezile. Ubude besikhathi sokusetha bulinganiswa ekuqaleni okubandayo. UKUVULA/UKUVALA umshayeli kungaholela ekwandeni kwesikhathi sokusetha. Ukwehliswa kwesilinganiso kungase kudingeke ngaphansi kwevolumu ephansi yokufakatages. Sicela ubheke izigaba "STATIC CHARACTERISTIC" ukuze uthole imininingwane. Umshayeli uthathwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothintwa ukufakwa okuphelele, abakhiqizi bemishini yokugcina kufanele baphinde bafanelekele i-EMC Directive ekufakweni okuphelele futhi. (njengoba itholakala ku https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf Lolu chungechunge luhlangabezana nesikhathi sokuphila esijwayelekile samahora angama-50,000 wokusebenza lapho iTcase, ikakhulukazi iphuzu lephuzu (noma i-TMP, nge-DLC ngayinye), cishe ingama-75 ℃ noma ngaphansi. Sicela ubheke isitatimende sewaranti ku-MEAN WELL's webindawo ku http://www.meanwell.com Izinga lokushisa elizungezile elingu-3.5℃/1000m elinamamodeli angena fan kanye elingu-5℃/1000m elinamamodeli amafeni wokuphakama kokusebenza okuphezulu kuno-2000m(6500ft). Nganoma iyiphi inothi yohlelo lokusebenza kanye nesexwayiso sokufakwa kokusebenza kobufakazi bamanzi e-IP, sicela ubheke imanuwali yethu yomsebenzisi ngaphambi kokuyisebenzisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Akunconywa ukuxhuma kumithwalo ye-capacitive Ngokusekelwe kumandla we-IEC 62386-101/102 DALI kumithetho yesikhathi nokuphazamiseka, isikhathi sokusetha sidinga ukuhlola ngesilawuli se-DALI esingasekela amandla e-DALI emsebenzini, ngaphandle kwalokho isikhathi sokusetha sizoba phezulu kunesekhondi elingu-0.5 ohlotsheni lwe-DA2. Ukuze ufeze izimfuneko zomthetho wakamuva we-ERP wezinto zokukhanyisa, lokhu kunikezwa kwamandla kagesi we-LED kungasetshenziswa kuphela ngemuva kweswishi ngaphandle kokuxhumeka unomphela kumapayipi amakhulu. Umshwana Wokuzikhipha Emthwalweni Womkhiqizo: Ukuze uthole imininingwane eyengeziwe, sicela ubheke https://www.meanwell.com/serviceDisclaimer.aspx
	Umcibisholo.com		File Igama: PWM-200-SPEC 2024-09-09

UMSEBENZI WOKUNQAMULA

Isimiso sokufiphalaza sokukhishwa kwesitayela se-PWM
Ukufiphaza kutholakala ngokuhlukahluka komjikelezo womsebenzi wamanje wokukhipha.

3 koku-1 kokufiphalisa umsebenzi (koHlobo Olungenalutho)‧

Sebenzisa enye yezindlela ezintathu phakathi kwe-DIM+ ne-DIM-: 0 ~ 10VDC, noma isignali ye-PWM engu-10V noma ukumelana.
Umthombo ofiphalayo wamanje kusuka kumandla kagesi: 100μA (uhlobo.)

Ukusebenzisa ukumelana nesengezo:

Qaphela :

Okuncane. umjikelezo womsebenzi wokukhiphayo wamanje cishe u-1%, futhi okokufaka kokufiphalisa cishe ku-6KΩ noma 0.6VDC, noma isignali engu-10V PWM enomjikelezo womsebenzi ongu-6%.
Umjikelezo wemfanelo wokukhiphayo wamanje ungehla ufike ku-0% lapho okokufaka kokufiphalisa kungaphansi kuka-6KΩ noma ngaphansi kuka-0.6VDC, noma isignali engu-10V PWM enomjikelezo wemisebenzi ongaphansi kuka-6%

I-interface ye-DALI PUSH dimming(uhlangothi oluyinhloko)

Isenzo	Ubude besenzo	Umsebenzi
Ukusunduza okufushane	0.1~1 isekhondi.	VULA umshayeli
Ukuphusha isikhathi eside	1.5~10 isekhondi.	Njalo Ukuphusha Okude kushintsha isiqondiso sokufiphala, ukufiphalisa phezulu noma phansi
Setha kabusha	>11 isekhondi.	Setha ileveli yokufiphala ibe ngu-100%

Izinga lokufiphalisa okuzenzakalelayo kwasembonini liku-100%.
Uma isenzo sokucindezela sihlala ngaphansi kwesekhondi elingu-0.05, ngeke siholele ekushintsheni kwesimo somshayeli.
Abashayeli abangafika kwabayi-10 bangenza i-PUSH dimming ngesikhathi esifanayo lapho besebenzisa inkinobho eyodwa evamile yokuphusha.
Ubude obukhulu bekhebula ukusuka kunkinobho yokusunduza ukuya kumshayeli wokugcina bungamamitha angama-20.
Inkinobho yokucindezela okungeziwe ingaxhunywa kuphela phakathi kwetheminali ye-DA+, njengoba kuboniswe kumdwebo, kanye ne-AC/L (emnyama noma emnyama); izoholela kumjikelezo omfushane uma ixhunywe ku-AC/N.

I-DALI Interface (ye-DA2-Type)

Faka isignali ye-DALI phakathi kwe-DA+ ne-DA-.
Iphrothokholi ye-DALI inamaqembu ayi-16 namakheli angama-64.
Min.duty umjikelezo wokuphumayo wamanje cishe 0.2%

OUTPUT LOAD vs TEMPERATURE

IZIMPAWU ZESITATIKI ISIQINISEKISO SAMANDLA (PF) CHARACTERISTIC

UKUQHUBEKA KOKUQHUBEKA KWEHARONI (THD)

UKUSEBENZA vs LOAD
Uchungechunge lwe-PWM-200 lunokusebenza okuseqophelweni eliphezulu okungafinyelelwa ku-94% ezinhlelweni zokusebenza zasenkambu.

Imodeli engu-48V, i-Tcase ku-75 ℃

ISIKHATHI SOKUPHILA

Umdwebo weBlock

Ukucaciswa Kwemishini

Ncoma ukukhonjwa indlela

Imanuwali yokufaka

Ukuxhuma kohlobo olungenalutho kanye nohlobo lwe-DA2

Izixwayiso

Ngaphambi kokuqala noma yimuphi umsebenzi wokufaka noma wokulungisa, sicela unqamule ukunikezwa kwamandla kosizo. Qinisekisa ukuthi ayikwazi ukuxhunywa kabusha ungaqondile!
Gcina umoya ohlanzekile uzungeze iyunithi futhi ungapakishi noma iyiphi into kuyo. Futhi indawo yokushisa engu-10-15 cm kufanele igcinwe lapho idivayisi eseduze ingumthombo wokushisa.
Ukukhweza umumo ngaphandle kokuma okujwayelekile noma ukusebenza ngaphansi kwezinga lokushisa le-ambient eliphezulu kungase kwenyuse izinga lokushisa lengxenye yangaphakathi futhi kuzodinga ukwehliswa kokulinganisa kokuphumayo kwamandla.

Isilinganiso samanje sekhebula eyinhloko/yesibili egunyaziwe kufanele sibe sikhulu noma silingane neseyunithi. Sicela ubhekisele ekucacisweni kwayo.
Kubashayeli be-LED abanezixhumi ezingangeni manzi, qinisekisa ukuthi ukuxhumana phakathi kweyunithi nendawo yokukhanyisa kuqinile ukuze amanzi angakwazi ukungena kusistimu.
Kumashayeli e-LED acimeka, qiniseka ukuthi isilawuli sakho sokufiphalisa siyakwazi ukushayela lawa mayunithi.Uchungechunge lwe-PWM ludinga u-0.15mA iyunithi ngayinye.

Tc ubuningi. ikhonjwa kulebula yomkhiqizo. Sicela uqiniseke ukuthi izinga lokushisa le-Tc point ngeke lidlule umkhawulo.
Ifanele ukusetshenziswa kwangaphakathi noma ukusetshenziswa ngaphandle ngaphandle kokuchayeka elangeni okuqondile. Sicela ugweme ukucwiliswa emanzini ngaphezu kwemizuzu engama-30.
Ukunikezwa kwamandla kubhekwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothintwa ukufakwa okuphelele, abakhiqizi bemishini yokugcina kufanele baphinde bafanelekele i-EMC Directive ekufakweni okuphelele futhi.

Amadokhumenti / Izinsiza

ISHO KAHLE PWM-200 Series 200W Constant Voltage PWM Output LED Driver [pdf] Incwadi Yomnikazi
I-PWM-200 Series 200W Constant Voltage PWM Output LED Driver, PWM-200 Series, 200W Constant Voltage PWM Output LED Driver, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, Driver

Izithenjwa

Imaniwali yosebenzisayo

ISHO KAHLE PWM-200 Series 200W Constant Voltage PWM Output LED Driver

Imiyalo yokusetshenziswa komkhiqizo