KUTHETHA KAHLE PWM-200 Series 200W Constant Voltage PWM Imveliso ye-LED Driver
Iinkcukacha
Imiyalelo yokusetyenziswa kwemveliso
Ukuhlohla:
Qinisekisa igalelo voltage ingaphakathi koluhlu oluxeliweyo lomfuziselo owusebenzisayo.
Xhuma umqhubi we-LED ngokuhambelana nomzobo wocingo onikwe kwincwadana.
Ukufiphala
Lungisa uluhlu lobumnyama njengoko lufuneka usebenzisa frequency echaziweyo ye-PWM yemodeli yakho.
Ukuvula amandla
Faka isicelo kumqhubi we-LED kwaye uqinisekise ukuba uzinzile ngaphakathi kwexesha lokubamba elikhankanywe kwiinkcukacha.
Ukulungisa ingxaki
Jonga kwincwadana yomsebenzisi ngamanyathelo okusombulula ingxaki xa kukho nayiphi na imiba enomqhubi we-LED.
Imibuzo Ebuzwa Rhoqo (FAQ)
Q: Yintoni na uluhlu lokuluzizilela PWM-200 series abaqhubi LED?
A: Uluhlu lwe-dimming luvela kwi-0% ukuya kwi-100% yazo zonke iimodeli kwi-PWM-200 series.
Iimbonakalo
- I-vol rhoqotage PWM isimbo imveliso kunye frequency ukuya kuthi ga kwi-4kHz uyilo oluhambelanayo IEEEI 789-2015(Uhlobo olungenanto)
- Izindlu zeplastiki ezineklasi ye-11 kunye noyilo lwe-PFC
- Isicelo sokukhanyisa okungxamisekileyo sifumaneka ngokwe-IEC61347-2-13
- Ukusetyenziswa kwamandla okulindile
- Ifakwe ngokupheleleyo kunye nenqanaba le-IP67
- Iinketho zokusebenza: 3 ku-1 dimming (dim-to-off kunye noYilo olulodwa)/DALl-2
- Ubuncinci benqanaba lobumnyama 0.2% kuhlobo lwe-DA2
- Ubomi obuqhelekileyo>iiyure ezingama-50000 kunye newaranti yeminyaka emi-5
Usetyenziso
- Ukukhanya komcu we-LED
- Ukukhanya kwe-LED yangaphakathi
- Ukukhanyisa kwe-LED yokuhlobisa
- Ukukhanya kwezakhiwo ze-LED
- Ukukhanya kweCove
Ukukhanya kwamashishini
Thayipha "HL" yokusetyenziswa kwiklasi l, ulwahlulo lwe-2 oluyingozi (luhlelwe) indawo.
IKHOWUDI ye-GTIN
Uphendlo lwe-MW: http://www.meanwell.com/serviceGTlN.aspx
Inkcazo
I-PWM-200 series yi-200W AC/DC LED umqhubi we-LED ebonisa ivolthi engaguqukiyo.tagimowudi enemveliso yesitayile se-PWM, ekwaziyo ukugcina ubushushu bombala kunye nokuqaqamba kwe-homogeneity xa uqhuba zonke iintlobo zemigca ye-LED. I-PWM-200 isebenza ukusuka kwi-100-305VAC kwaye inikezela ngeemodeli ezinevolthi eyahlukileyo.tage ukusuka phakathi kwe-12V kunye ne-48V. Ngombulelo ekusebenzeni okuphezulu ukuya kuthi ga kwi-94% kunye noyilo olungena fan, lonke uchungechunge luyakwazi ukusebenza kwi--400C + 850C iqondo lokushisa phantsi kwe-convection yomoya yamahhala. Uluhlu lonke lulinganiswe kunye nenqanaba lokukhusela i-IP67 kwaye lifanelekile ukusebenzela ukomisa, damp okanye iindawo ezimanzi. I-PWM-200 ixhotyiswe ngomsebenzi wokufiphala oguqula umjikelo womsebenzi wemveliso, ukubonelela ngokuguquguquka okukhulu kwizicelo zemicu ye-LED.
Ukwenza iikhowudi kwimodeli
INGCACISO
| UMZEKELO | PWM-200-12 | PWM-200-24 | PWM-200-36 | PWM-200-48 | |||
| IPHUMO | I-DC VOLTAGE | 12V | 24V | 36V | 48V | ||
| IRETHWE NGOKU | 15A | 8.3A | 5.55A | 4.17A | |||
| RATED AMANDLA | 180W | 199.2W | 199.8W | 200.1W | |||
| ULAWULO LOKUPHIMA | 0 ~ 100% | ||||||
| PWM FREQUENCY (Uhlobo.) | 4kHz yohlobo olungenanto; I-2.5kHz yohlobo lwe-DA2 | ||||||
| UKUSETYENZISWA, UKUVUSA IXESHA Qaphela.2Qaphela.10 | 500ms, 80ms/230VAC okanye 115VAC | ||||||
| BAMBA IXESHA OKUPHEZULU (Isimbo.) | 10ms/230VAC okanye 115VAC | ||||||
| Igalelo | UMQULUTAGUHLU Phawula.3 | 100 ~ 305VAC 142 ~ 431VDC(Nceda ubhekisele kwicandelo elithi “STATIC CHARACTERISTIC”) | |||||
| UHLELO LOKUQHUBEKA | I-47 ~ 63Hz | ||||||
| UMBONO WAMANDLA (Uhlobo.) | PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ kumthwalo opheleleyo(Nceda ubhekisele kwicandelo elithi “MANDLA FACTOR (PF) CHARACTERISTIC”) | ||||||
| IYONKE HARMONIC UPHAZANYISO | THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Nceda ubhekisele kwicandelo elithi “TOTAL HARMONIC DISTORTION”) | ||||||
| UKUSEBENZA (Uhlobo.) | 92% | 93% | 94% | 94% | |||
| AC CURRENT (Uhlobo.) | 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC | ||||||
| UKUQHUTYWA NGOKU (Uhlobo.) | COLD START 65A(twidth=55μ0 s measured at 50% Ipeak) at 230VAC; Ngokwe-NEMA 410 | ||||||
| MAX. HAYI. yee-PSUs kwi-16A CIRCUIT BREAKER | Iiyunithi ezi-3 (i-circuit breaker yohlobo B) / iiyunithi ezi-5 (i-circuit breaker yohlobo C) kwi-230VAC | ||||||
| UKUVUZA NGOKU | <0.75mA / 277VAC | ||||||
| UKUSETYENZISWA KWAMANDLA OKUMILEYO | ukusetyenziswa kwamandla okulinda <0.5W xa ubumnyama bucima | ||||||
| UKUKHUSELA | UKUNXULISWA | I-108 ~ 135% inikwe amandla emveliso | |||||
| Imowudi ye-Hiccup okanye imida yangoku eqhubekayo, ifumana kwakhona ngokuzenzekelayo emva kokuba imeko yempazamo isusiwe | |||||||
| INTAMBO EMFUTSHANE | Cima o/p voltage, vula amandla kwakhona ukuze ufumane (ngaphandle kohlobo lwe-DA2) imo ye-Hiccup, ifumana kwakhona ngokuzenzekelayo emva kokuba imeko yempazamo isusiwe (kuphela kuhlobo lwe-DA2) | ||||||
| PHANTSI VOLTAGE | 13 ~ 18V | 27 ~ 34V | 41 ~ 49V | 53 ~ 65V | |||
| Cima o/p voltage, vula amandla kwakhona ukuze ufumane kwakhona emva kokuba imeko yempazamo isusiwe | |||||||
| NGAPHEZU KWEBUHLUNGU | Cima o/p voltage, vula amandla kwakhona ukuze ufumane kwakhona emva kokuba imeko yempazamo isusiwe | ||||||
| IMEKO | ITEMPU YOKUSEBENZA. | Tcase=-40 ~ +85℃ (Nceda ubhekisele kwicandelo elithi “ OUTPUT LOAD vs TEMPERATURE”) | |||||
| MAX. CASE TEMP. | Tcase=+85℃ | ||||||
| UKUSEBENZA UKUTHUKA | I-20 ~ 95% ye-RH engavumiyo | ||||||
| UKUGCINA TEMP., UKUFUMANEKA | -40 ~ +80℃, 10 ~ 95% RH | ||||||
| IXESHA. UKUQINISEKISA | ±0.03%/℃ (0 ~ 50℃) | ||||||
| UKUDIDLA | 10 ~ 500Hz, 5G 12min./1cycle, ixesha le-72min. nganye ecaleni X, Y, Z izizembe | ||||||
| UKHUSELEKO & I-EMC | IMIGANGATHO YOKHUSELEKO Qaphela.5 | UL8750( uhlobo "HL"), CSA C22.2 No. 250.13-12; I-ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384izimeleyo, IP67, EAC TP TC 004,GB19510.1,GB19510.14, IS15885(Ingxenye2/V ngaphandle kwe13); Uyilo lubhekiselele kwi-BS EN/EN36-60335, Ngokutsho kwe-BS EN/EN1-61347-2 isihlomelo J esilungele ukufakwa kukaxakeka. | |||||
| IMIGANGATHO YEDALI | Ukuthobela i-IEC62386-101, 102, 207, 251 yohlobo lwe-DA2 kuphela, uhlobo lweSixhobo 6(DT6) | ||||||
| YIMA IVOLITAGE | I/PO/P: 3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA:1.5KVAC | ||||||
| UKUCHASWA KWAMAKHELA | I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
| UKUQALISWA KWE-EMC Qaphela.6 | Ukuthotyelwa kwe-BS EN/EN55015, BS EN/EN61000-3-2 Udidi C (@load≧60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020 | ||||||
| UKUGONYWA KWI-EMC | Ukuthotyelwa kwe-BS EN/EN61000-4-2,3,4,5,6,8,11; I-BS EN/EN61547, inqanaba loshishino olukhanyayo (i-surge immunity, Line-Line 2KV), i-EAC TP TC 020 | ||||||
| ABANYE | MTBF | 2235.6K iiyure min. I-Telcordia SR-332 (Bellcore) ;178.7K iiyure imiz. I-MIL-HDBK-217F (25℃) | |||||
| DIMENSION | 195*68*39.5mm (L*W*H) | ||||||
| UKUPAKISHA | 1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT | ||||||
| PHAWULA |
I-Disclaimer Liability Disclaimer: Ngolwazi oluneenkcukacha, nceda ubhekiselele https://www.meanwell.com/serviceDisclaimer.aspx |
||||||
| Arrow.com | File Igama: PWM-200-SPEC 2024-09-09 | ||||||
UKUSEBENZA KWAKUNCINCI
Umgaqo-nkqubo wokuncipha kwemveliso yesimbo se-PWM
Ubumnyama buphunyezwa ngokutshintsha umjikelo womsebenzi wemveliso yangoku. 
3 kwi-1 umsebenzi wokufiphala (yeSihlo esingenanto)‧
- Faka enye yeendlela ezintathu phakathi kwe-DIM+ kunye ne-DIM-: 0 ~ 10VDC, okanye i-10V isignali ye-PWM okanye ukuxhathisa.
- Umthombo onciphayo ngoku kubonelelo lwamandla: 100μA (uhlobo.)
Ukufaka uxhathiso olongezelelweyo: 
Phawula :
- Min. umjikelo womsebenzi wemveliso yangoku malunga ne-1%, kwaye igalelo le-dimming li malunga ne-6KΩ okanye i-0.6VDC, okanye i-10V yesiginali ye-PWM kunye ne-6% yomsebenzi.
- Umjikelo womsebenzi wemveliso yangoku unokuhla ukuya kwi-0% xa igalelo le-dimming lingaphantsi kwe-6KΩ okanye ngaphantsi kwe-0.6VDC, okanye i-10V yesignali ye-PWM kunye nomjikelezo womsebenzi ongaphantsi kwe-6%.
Ujongano lweDALI
TYHALA ubumnyama (icala lokuqala)
| Isenzo | Ubude bentshukumo | Umsebenzi |
| Ukutyhala okufutshane | 0.1 ~ 1 umzuzwana. | Vula umqhubi |
| Ukutyhala ixesha elide | 1.5 ~ 10 umzuzwana. | Lonke utyhala olude lutshintsha icala eliya kuba luzizi, luba luzizi phezulu okanye ezantsi |
| Lungisa kwakhona | >11 imizuzwana. | Misela inqanaba lobumnyama ukuya kwi-100% |
- Umgangatho wokukhanya omiselweyo womzi-mveliso ukwi-100%.
- Ukuba isenzo sokutyhala sihlala ngaphantsi kwe-0.05 sec., ayiyi kukhokelela ekutshintsheni isimo somqhubi.
- Ukuya kuthi ga kwi-10 abaqhubi banokwenza i-PUSH dimming ngaxeshanye xa usebenzisa iqhosha elinye eliqhelekileyo lokutyhala.
- Ubude obude bekhebula ukusuka kwiqhosha lokutyhala ukuya kumqhubi wokugqibela ziimitha ezingama-20.
- Iqhosha lokutyhala elongezelelweyo linokudityaniswa kuphela phakathi kwe-terminal ye-DA+, njengoko kubonisiwe kumzobo, kunye ne-AC/L (emdaka okanye emnyama); iya kukhokelela kwisekethe emfutshane ukuba iqhagamshelwe kwi-AC/N.
I-DALI Interface (ye-DA2-Type)
- Faka umqondiso we-DALI phakathi kwe-DA+ kunye ne-DA-.
- Iprothokholi ye-DALI inamaqela ali-16 kunye needilesi ezingama-64.
- Min.duty cycle of output current imalunga ne-0.2%
I-OUTPUT LOAD vs TEMPERATURE
IMPAWU ENGQONDO 
UMBONO WAMANDLA (PF) UMNTU
IYONKE I-HARMONIC DISTORTION (THD) 
UKUSEBENZA vs UMSEBENZI
Uthotho lwe-PWM-200 lunokusebenza okusebenzayo okuya kuthi ga kwi-94% kunokufikelelwa kwizicelo zasendle.
Imodeli ye-48V, iTcase kwi-75 ℃
UBOMI BONKE
Umzobo weBhloko
Ukucaciswa koomatshini
Cebisa umkhomba-ndlela wokunyuka 
INcwadana yoFakelo
Uqhagamshelo lohlobo olungenanto kunye nohlobo lwe-DA2
Izilumkiso
- Ngaphambi kokuba uqalise naluphi na ufakelo okanye umsebenzi wokulungisa, nceda uqhawule unikezelo lombane kwizinto eziluncedo. Qinisekisa ukuba ayinakuphinda idityaniswe ngempazamo!
- Gcina umoya ococekileyo ojikeleze iyunithi kwaye ungapakishi nayiphi na into kuyo. Kwakhona i-10-15 cm yokucoca kufuneka igcinwe xa isixhobo esisecaleni singumthombo wokushisa.
- Ukuxhoma uqhelaniso ngaphandle kokuqhelaniswa nomgangatho okanye ukusebenza phantsi kobushushu obuphezulu be-ambient kunokunyusa ubushushu becandelo langaphakathi kwaye kuya kufuna ukucuthwa komgangatho kwimveliso yangoku.
- Ireyithingi yangoku yentambo evunyiweyo yokuqala / yesibini kufuneka ibe nkulu okanye ilingane naleyo yeyunithi. Nceda ubhekisele kwiinkcukacha zayo.
- Kubaqhubi be-LED abanezixhumi ezingenamanzi, qinisekisa ukuba ukudibanisa phakathi kweyunithi kunye nokukhanya kokukhanyisa kuqinile ukwenzela ukuba amanzi angenako ukungena kwinkqubo.
- Kubaqhubi be-LED abaluzizi, qiniseka ukuba isilawuli sakho sobumnyama siyakwazi ukuqhuba ezi yunithi.PWM series zifuna i-0.15mA iyunithi nganye.
- Tc max. ichongiwe kwileyibhile yemveliso. Nceda uqinisekise ukuba iqondo lobushushu leqondo le-Tc aliyi kudlula umda.
- Ifanelekile ukusetyenziswa kwangaphakathi okanye ukusetyenziswa kwangaphandle ngaphandle kokuvela kwelanga ngqo. Nceda uphephe ukuntywiliselwa emanzini ngaphezu kwemizuzu engama-30.
- Ukunikezelwa kombane kuthathwa njengecandelo eliya kusetyenziswa ngokudibeneyo nezixhobo zokugqibela. Ekubeni ukusebenza kwe-EMC kuya kuchaphazeleka kufakelo olupheleleyo, abavelisi bezixhobo zokugqibela kufuneka baphinde bafanelekele i-EMC Directive kufakelo olupheleleyo kwakhona.
Amaxwebhu / Izibonelelo
 |
KUTHETHA KAHLE PWM-200 Series 200W Constant Voltage PWM Imveliso ye-LED Driver [pdf] Incwadi yoMnini I-PWM-200 Series 200W Constant Voltage PWM Isiphumo Umqhubi we-LED, PWM-200 Series, 200W Constant Voltage PWM Imveliso ye-LED Driver, Voltage PWM Isiphumo somqhubi we-LED, i-PWM Isiphumo somqhubi we-LED, iPhulo loMqhubi we-LED, uMqhubi |
