HO BOLELA HONA PWM-200 Series 200W Constant Voltage PWM Output LED Driver Ow Manual

Kemiso:
Netefatsa hore ho kenya molumotage e ka har'a sebaka se boletsoeng bakeng sa mofuta oo u o sebelisang.
Hokela mokhanni oa LED ho latela setšoantšo sa wiring se fanoeng bukeng ea tataiso.

Ho fifala
Fetola sebaka sa ho fifala ha ho hlokahala ka ho sebelisa frequency e boletsoeng ea PWM bakeng sa mohlala oa hau.

Ho Matlafatsa
Kenya motlakase ho mokhanni oa LED 'me u netefatse hore o tsitsitse ka nako ea ho emisa e boletsoeng ho litlhaloso.

Ho batle phoso
Sheba buka ea mosebedisi bakeng sa mehato ea ho rarolla mathata haeba ho na le mathata leha e le afe ka mokhanni oa LED.

Lipotso tse atisang ho botsoa (FAQ)

Q: ke mofuta ofe dimming bakeng sa PWM-200 letoto la bakhanni LED?
A: Letoto la dimming le tsoa ho 0% ho isa ho 100% bakeng sa mefuta eohle ea letoto la PWM-200.

Likaroloana

Kamehla voltagTlhahiso ea setaele sa e PWM e nang le khafetsa ho fihla ho 4kHz e lumellanang le moralo oa IEEEI 789-2015(Mofuta o se nang letho)

Ntlo ea polasetiki e nang le moralo oa sehlopha sa 11 le PFC
Sesebelisoa sa mabone a tšohanyetso se fumaneha ho latela IEC61347-2-13

Tšebeliso ea matla a standby
E koahetsoe ka botlalo le boemo ba IP67

Dikgetho tsa tshebetso: 3 ho 1 dimming (dim-to-off le Isolated Design)/DALl-2
Boemo bo tlase ba dimming 0.2% bakeng sa mofuta oa DA2

Nako e tloaelehileng ea bophelo> lihora tse 50000 le waranti ea lilemo tse 5

Lisebelisoa

Leseli la lebone la LED

Lebone la LED le ka hare
Leseli le khabisitsoeng ka LED

Leseli la mehaho ea LED
Lebone le khantšitsoeng

Mabone a indasteri
Tlanya "HL" bakeng sa ho sebelisoa sehlopheng sa l, karolo ea 2 sebaka se kotsi (se khethiloeng).

GTIN KHOUTU
MW Search: http://www.meanwell.com/serviceGTlN.aspx

Tlhaloso

Letoto la PWM-200 ke mokhanni oa LED oa 200W AC/DC o nang le matla a sa feleng.tage nang le tlhahiso ea setaele sa PWM, e khonang ho boloka mocheso oa 'mala le ho khanya homogeneity ha o khanna mefuta eohle ea likhoele tsa LED. PWM-200 e sebetsa ho tloha ho 100-305VAC 'me e fana ka mefuta e nang le matla a fapaneng a matla.tage pakeng tsa 12V le 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 94% ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa linyeoe -400C +850C tlas'a convection ea mahala ea moea. Letoto lohle le fuoe maemo a ts'ireletso ea IP67 'me le loketse ho sebetsa bakeng sa ho omella, damp kapa libaka tse metsi. PWM-200 e na le ts'ebetso ea dimming e fetolang potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lisebelisoa tsa lisebelisoa tsa LED.

Moetso oa khouto ea mohlala

TS'ELISO

MOHLALA				EA-200-PW	EA-200-PW	EA-200-PW	EA-200-PW
SEHLOOHO		DC VOLTAGE		12V	24V	36V	48V
		RETŠELISITSOE NKHOANE		15A	8.3A	5.55A	4.17A
		REKETSO MATLA		180W	199.2W	199.8W	200.1W
		LIEKETSENG DIMM		0 ~ 100%
		MAIKETLO A PWM (Mofuta.)		4kHz bakeng sa mofuta o se nang letho; 2.5kHz bakeng sa mofuta oa DA2
		SETUP, TSOSA NAKO ^{Hlokomela. 2}Hlokomela. 10		500ms, 80ms/230VAC kapa 115VAC
		TS'EPA UP NAKO (Mofuta.)		10ms / 230VAC kapa 115VAC
KEKETSO		TLHOKOMELOTAGE RETS'ELA Hlokomela.3		100 ~ 305VAC 142 ~ 431VDC(Ka kopo sheba karolo ea "STATIC CHARACTERISTIC")
		MOEKETSENG MAKOANE		47 ~ 63Hz
		SEBETSO SA MATLA (Typ.)		PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ full load(Ka kopo, sheba karolo ea “POWER FACTOR (PF) CHARACTERISTIC”)
		KAOFELA HARMONIC PHETOLO		THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Ka kopo, sheba karolo ea “TOTAL HARMONIC DISTORTION”)
		KATLEHO (Mofuta.)		92%	93%	94%	94%
		AC CURRENT (Mofuta.)		2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
		INRUSH CURRENT (Mofuta.)		COLD START 65A(twidth=55μ0 s measured at 50% Ipeak) at 230VAC; Ka NEMA 410
		MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER		Li-unit tse 3 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 5 (sekheo sa potoloho sa mofuta oa C) ho 230VAC
		LEAKAGE NKHOANE		<0.75mA / 277VAC
		TS'ELISO MATLA A MATLA		ts'ebeliso ea motlakase e emeng <0.5W ha e fifala
TS'IRELETSO		KHAHLISA		108 ~ 135% e lekantsoe matla a tlhahiso
				Mokhoa oa Hiccup kapa moeli oa hona joale oa kamehla, o hlaphoheloa ka bohona kamora hore boemo ba phoso bo tlosoe
		POTOLOHO E KHUTSOANE		Koala o/p voltage, bula hape matla a ho hlaphoheloa (ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2)
		KHAHLISO SEFOLITAGE		13 ~ 18V	27 ~ 34V	41 ~ 49V	53 ~ 65V
				Koala o/p voltage, kenya hape matla a ho hlaphoheloa ka mor'a hore boemo ba phoso bo tlosoe
		PHEKO MOCHESO		Koala o/p voltage, kenya hape matla a ho hlaphoheloa ka mor'a hore boemo ba phoso bo tlosoe
TIKOLOHO		MOSEBETSI TEMPELA.		Tcase=-40 ~ +85℃ (Ka kopo, sheba karolo ea “ OUTPUT LOAD vs TEMPERATURE”)
		MAX. TLHALOSO TEMPE.		Mokotlana = + 85 ℃
		MOSEBETSI MOKOBELO		20 ~ 95% RH e sa lumellaneng
		POLOKO TEMP., MONATE		-40 ~ + 80 ℃, 10 ~ 95% RH
		MOEKETSI. TIISETSO MOKHOA		± 0.03% / ℃ (0 ~ 50 ℃)
		TSIETSO		10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z
POLOKO & EMC		TS'IRELETSO MAEMO Hlokomela. 5		UL8750( mofuta "HL"), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384e ikemetseng, IP67, EAC TP TC 004,GB19510.1,GB19510.14, IS15885(Part2/VSec13) e amohetsoe; Moralo o bua ka BS EN/EN36-60335, Ho latela BS EN/EN1-61347-2 sehlomathiso J se loketseng lits'ebetso tsa tšohanyetso.
		DALI LITEKELO		Ikamahanya le IEC62386-101, 102, 207, 251 bakeng sa Mofuta oa DA2 feela, Mofuta oa sesebelisoa sa 6(DT6)
		EMELANG KOLOKOTAGE		I/PO/P: 3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA:1.5KVAC
		HO IKAOA KHANYETSO		I / PO / P: 100M Ohms / 500VDC / 25 ℃ / 70% RH
		EMC TS'ISITSO Hlokomela. 6		Ho lumellana le BS EN/EN55015, BS EN/EN61000-3-2 Sehlopha sa C (@load≧60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
		TSIETSI EMC		Ho ikamahanya le BS EN / EN61000-4-2,3,4,5,6,8,11; BS EN / EN61547, boemo ba indasteri e bobebe (ho itšireletsa mafung, Line-Line 2KV), EAC TP TC 020
BA BANG		MTBF		2235.6K lihora tsa mots. Telcordia SR-332 (Bellcore);178.7K hrs min. MIL-HDBK-217F (25℃)
		TŠEBELETSO		1956839.5mm (LWH)
		PAKA		1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT
HLOKOMELA		Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ho 230VAC, e lekantsoe hajoale le 25℃ ea mocheso o tikolohong. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka baka keketseho ea nako ea ho seta. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaasetages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape. (joalokaha e fumaneha ho https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf Letoto lena le kopana le tebello ea bophelo ea lihora tse> 50,000 ha Tcase, haholo-holo tc point (kapa TMP, ka DLC), e ka ba 75 ℃ kapa ka tlase. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's website at http://www.meanwell.com Thempereichara e fokotsehileng ea 3.5℃/1000m e nang le mefuta e se nang fan le ea 5℃/1000m e nang le mefuta ea fan bakeng sa bophahamo ba ts'ebetso e fetang 2000m(6500ft). Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Ha e khothalletsoe ho hokahanya le meroalo ea capacitive E ipapisitse le matla a IEC 62386-101/102 DALI mabapi le melao ea nako le tšitiso, nako e behiloeng e hloka ho lekoa ka molaoli oa DALI ea ka ts'ehetsang matla a DALI ts'ebetsong, ho seng joalo nako ea ho seta e tla ba e phahameng ho feta metsotsoana ea 0.5 bakeng sa mofuta oa DA2. . Ho phethahatsa litlhokahalo tsa melaoana ea morao-rao ea ErP bakeng sa lisebelisoa tsa mabone, phepelo ena ea motlakase ea LED e ka sebelisoa feela ka mor'a switch ntle le ho hokahana ka ho sa feleng ho mains. Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx
	Arrow.com		File Lebitso: PWM-200-SPEC 2024-09-09

MOSEBETSI OA DIMMING

Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM
Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.

3 ho 1 ts'ebetso ea ho fifala (bakeng sa Mofuta oa Blank) ‧

Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.
Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)

Ho sebelisa li-additive resistance:

Hlokomela :

Min. duty cycle of output current e ka ba 1%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.

Sehokelo sa DALI PUSH dimming(lehlakore la mantlha)

Ketso	Nako ea ts'ebetso	Mosebetsi
Ho sututsa nako e kgutshwane	0.1 ~ 1 metsotsoana.	Bulela mokhanni
Ho sututsa nako e telele	1.5 ~ 10 metsotsoana.	Nako e 'ngoe le e 'ngoe e Long Push e fetola tsela ea ho fifala, ho fifala ho ea holimo kapa tlase
Seta bocha	>11 sec.	Beha boemo ba dimming ho 100%

Boemo ba dimming bo sa feleng ba feme bo ho 100%.
Haeba ts'ebetso ea push e nka nako e ka tlase ho 0.05 sec., e ke ke ea lebisa phetohong ea boemo ba mokhanni.
Ho fihla ho bakhanni ba 10 ba ka etsa PUSH dimming ka nako e le 'ngoe ha ba sebelisa konopo e le' ngoe e tloaelehileng.
Bolelele bo boholo ba thapo ho tloha konopo ea push ho ea ho mokhanni oa ho qetela ke limithara tse 20.
Konopo ea "additive push" e ka hokeloa feela lipakeng tsa DA+ terminal, joalo ka ha e bonts'itsoe setšoantšong, le AC/L (e sootho kapa e ntšo); e tla lebisa ho potoloho e khuts'oane haeba e hokahane le AC/N.

DALI Interface (bakeng sa DA2-Type)

Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
Min.duty cycle of output current e ka ba 0.2%

OUTPUT LOAD vs TEMPERATURE

TŠOANELO STATIC MATLA (PF) TŠEBELETSO

PUSELETSO EA TSOHLE EA HARMONIC (THD)

KATLEHO vs MOJARO
Letoto la PWM-200 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 94% lits'ebetsong tsa masimong.

Mohlala oa 48V, Tcase ho 75 ℃

BOPHELONG

Setšoantšo se Thibeloang

Tlhaloso ea Mechini

Khothaletsa Tataiso ea ho Nyoloha

Bukana ea ho kenya

Khokahano bakeng sa mofuta oa Blank le mofuta oa DA2

Litemoso

Pele o qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, khaola motlakase ho sesebelisoa. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!
Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
Maemo a ho fanyeha ntle le a tloaelehileng kapa a sebetsa tlas'a mocheso o phahameng oa tikoloho a ka eketsa mocheso oa karolo ea ka hare 'me ho tla hloka hore ho fokotsoe tekanyo ea tlhahiso ea hona joale.

Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo sheba litlhaloso tsa eona.
Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile e le hore metsi a se ke a kenella tsamaisong.
Bakeng sa bakhanni ba LED ba timang, etsa bonnete ba hore selaoli sa hau sa dimming se khona ho khanna likarolo tsena.PWM series e hloka 0.15mA unit ka 'ngoe.

Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli.
E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e 30.
Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape.

Litokomane / Lisebelisoa

HO BOLELA HONA PWM-200 Series 200W Constant Voltage PWM Output LED Driver [pdf] Buka ea Mong'a
PWM-200 Series 200W Constant Voltage PWM Output LED Driver, PWM-200 Series, 200W Constant Voltage PWM Output LED Driver, Moqtage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, Driver

Litšupiso

Bukana ea Mosebelisi

HO BOLELA HONA PWM-200 Series 200W Constant Voltage PWM Output LED Driver

Litaelo tsa Tšebeliso ea Sehlahisoa