I-KAIFA CX105-A RF Module

Imiyalo yokusetshenziswa komkhiqizo

Ukufakwa

1. Khetha indawo efanele yokufaka imojuli ye-RF.
2. Qinisekisa ukuthi uxhumo olufanele lokuphakelwa kukagesi lwenziwa ngokuya ngemibandela ebekiwe.
3. Faka imojuli ngokuvikelekile ukuze uvimbele noma yikuphi ukunyakaza ngesikhathi sokusebenza.

Ukucushwa

1. Bheka imanuwali yomkhiqizo ngezilungiselelo ezithile zokucushwa.
2. Setha imvamisa yokusebenza ngokusekelwe endaweni yokusetshenziswa (i-EU noma i-NA).
3. Lungisa uhlobo lokuguquguquka namandla okukhipha njengoba kudingeka kuhlelo lwakho lokusebenza.

Isondlo

1. Njalo hlola noma yimuphi umonakalo ngokomzimba noma ukuxhumeka okuxekethile.
2. Hlanza imojuli usebenzisa indwangu ethambile, eyomile ukuze ususe noma yiluphi uthuli noma udoti.
3. Gada amazinga okusetshenziswa kwamandla ukuze uqinisekise ukusebenza kahle.

I-CX105-A RF Module

• I-IEEE 802.15.4g-based proprietary networking
• I-Smart metering
• Ukuqapha nokulawula kwezimboni
• I-alamu engenantambo nezinhlelo zokuphepha
• Ingqalasizinda kamasipala
• Ikhaya nesakhiwo esihlakaniphile

Incazelo

• Imojula ye-CX105-A RF iwumkhiqizo othobela umthetho olandelwayo we-IEEE802.15.4g SUN FSK futhi unikezelwe kuzinhlelo zokusebenza eziyingxube ze-IEEE802.15.4g ne-G3.
• Futhi i-CX105-A iwumkhiqizo wemodi ekabili, ohlanganisa ingxenye engaphansi kwe-1G kanye nengxenye yamandla aphansi e-Bluetooth. I-sub 1G isebenza ku-863MHz ~ 870MHz noma ku-902MHz~928MHz, inamandla okukhipha amandla afinyelela ku-+27dBm, kuyilapho i-Bluetooth yamandla aphansi isebenza ku-2400MHz~2483.5MHz, ngokusekelwa kwamandla okukhiphayo afika ku-+8dBm.
• Uma le mojula isetshenziswa eYurophu, isebenza kubhendi engu-863MHz~870MHz. Uma le mojula isetshenziswa emazweni aseMelika, isebenza kubhendi ye-902MHz ~ 928MHz.

Izici

• Ukusekela IEEE 802.15.4g, G3 Hybrid
• Amabhendi wemvamisa 863MHz~870MHz noma 902MHz~928MHz
• Imodi yokushintshashintsha: FSK, GFSK
• Ukuzwela umamukeli okuhle kakhulu: 104dBm@50kbps
• Ubukhulu bamandla okukhiphayo okudlulisa: + 27dBm
• Okukhiphayo okuzenzakalelayo amandla ramping
• I-RX ezenzakalelayo vuka ngenxa yamandla aphansi lalela
• Ukuvuka okusheshayo kanye ne-AGC yokulalela amandla aphansi
• Imisebenzi yokuqina kwesixhumanisi esingenantambo: Isiteshi se-RF sigxuma Ukuzivuma ngokuzenzakalela
• I-RSSI yedijithali kanye nokuhlolwa kwesiteshi okucacile kwe-CSMA kanye nezinhlelo zokulalela ngaphambi kokukhuluma
• Ambient lokushisa ububanzi: -25℃~+70℃

Imininingwane

Izimpawu Zemishini

Ukusetshenziswa kwamandla
Okulandelayo idatha yokuhlola ukusetshenziswa kwamandla kwezinye izimo zohlelo lokusebenza ezijwayelekile.

Izilinganiso Eziphelele Eziphelele
Izingcindezi ezingaphezu kwamanani abalwe ngezansi zingabangela ukwehluleka unomphela kwedivayisi. Ukuchayeka ezilinganisweni eziphelele zezikhathi ezinwetshiwe kungase kuthinte ukuthembeka kwedivayisi, kunciphise isikhathi sokuphila komkhiqizo.

Izici zikagesi

I-PIN yemojuli Ukuchazwa

I-PIN Incazelo

Incazelo
Le module ye-CX105-A idinga ukusebenzisana nedivayisi yokugcina, ngoba amandla anikezwa idivayisi yokugcina, futhi ukwakheka kwayo kungokulandelayo, futhi i-firmware yemojula igcinwa kudivayisi yokugcina futhi ukuxhumana kuqaliswa yidivayisi yokugcina, futhi i-antenna yemodyuli iphinde ifakwe kudivayisi yokugcina, lapho kuzodluliselwa khona isignali engenantambo yemodyuli.

Uhlu lwemithetho ye-FCC esebenzayo
Le mojula ihloliwe futhi yatholakala ukuthi ithobelana nezimfuneko zengxenye 15 zokugunyazwa kweModular. I-modular transmitter igunyazwe i-FCC kuphela ezingxenyeni ezithile zomthetho (okungukuthi, imithetho yesidluliseli se-FCC) esohlwini lwesibonelelo, nokuthi umkhiqizi womkhiqizo osokhaya unesibopho sokuthobela noma yimiphi imithetho ye-FCC esebenza kumsingathi engakhaviwe yi-modular transmitter grant of certification. Uma onikezwayo amaketha umkhiqizo wakhe njengothobela Ingxenye 15 Engaphansi B (lapho futhi iqukethe isifunda sedijithali serediyetha), khona-ke onikezwayo uzohlinzeka ngesaziso esisho ukuthi umkhiqizo wokugcina wokuba usokhaya usadinga ukuhlolwa kokuthobela Ingxenye 15 Yengxenye Engaphansi B efakwe isidluliseli semodular.

Ulwazi Lwemanuwali oluya kumsebenzisi wokugcina
Umhlanganisi we-OEM kufanele aqaphele ukuthi anganikezi umsebenzisi wokugcina ulwazi mayelana nendlela yokufaka noma ukususa le mojula ye-RF encwadini yomsebenzisi yomkhiqizo wokugcina ehlanganisa le mojula. Imanuwali yomsebenzisi wokugcina izofaka yonke imininingwane edingekayo yokulawula/isexwayiso njengoba kubonisiwe kule manuwali.

I-Antenna

1. I-antenna kufanele ifakwe ngendlela yokuthi u-20 cm ugcinwe phakathi kwe-antenna nabasebenzisi.
2. Imojula yokudlulisa kungenzeka ingabi ndawonye nanoma yisiphi esinye isidluliseli noma uthi.

Esimeni lapho le mibandela ingenakufinyelelwa khona (ngokwesiboneloampekucushweni okuthile kwekhompuyutha ephathekayo noma ukuhlanganiswa kwesinye isidluliseli), ukugunyazwa kwe-FCC akusabhekwa njengokuvumelekile, futhi i-ID ye-FCC ayikwazi ukusetshenziswa emkhiqizweni wokugcina. Kulezi zimo, isihlanganisi se-OEM sizoba nesibopho sokuhlola kabusha umkhiqizo wokugcina (okuhlanganisa nesidluliseli) kanye nokuthola ukugunyazwa kwe-FCC okuhlukile.

Ukuze uhambisane nemithetho ye-FCC ebeka umkhawulo womabili amandla aphezulu e-RF aphumayo kanye nokuchayeka komuntu emisebeni ye-RF, ukuzuza okuphezulu kwezimpondo (okuhlanganisa nokulahleka kwekhebula) akumele kudlule.

Izidingo zokuklama i-antenna

1. I-RF-line idinga i-50Ω yokungena komugqa owodwa;
2. I-BLE Antenna iyi-2.4G ye-Bluetooth frequency band PCB board board;
3. Ubude be-antenna, ububanzi, ukuma (ama) kanje, Inkampani: mm;
4. Ugqinsi lwe-PCB luyi-1.6mm, I-Copper-Layer 4, i-Antenna iyi-Layer1;
5. I-Antenna ibeka onqenqemeni lwe-PCB, Ukusula nxazonke nangaphansi;
6. I-SRD Antenna iyibhendi yefrikhwensi ye-ISM engu-902-928MHz;
7. Ubude be-antenna, ububanzi, umumo(ama) kanje, Inkampani: mm.
8. Imbobo ye-RF ephumayo yemojuli ixhunywe kusixhumi esibonakalayo se-SMA ngomugqa we-microstrip kusendlalelo sokuqala se-PCB yedivayisi yetheminali, bese ixhunywa ku-antenna ye-SDR.

Imanuwali yokufaka ye-OEM/Integrators

Isaziso Esibalulekile kubahlanganisi be-OEM

1. 1. Le mojula ikhawulelwe ekufakweni kwe-OEM KUPHELA.
2. Le mojula ikhawulelwe ekufakweni ezinhlelweni eziphathwayo noma ezingashintshi, ngokuya ngeNgxenye 2.1091(b).
3. Ukugunyaza okuhlukile kuyadingeka kukho konke okunye ukulungiselelwa kokusebenza, okuhlanganisa ukulungiselelwa okuphathekayo ngokuphathelene neNgxenye 2.1093 nokulungiselelwa okuhlukile kwezinti.

Okwe-FCC Ingxenye 15.31 (h) kanye no-(k): Umkhiqizi womsingathi unesibopho sokuhlola okwengeziwe ukuze aqinisekise ukuthobelana njengesistimu eyinhlanganisela. Lapho uhlola idivayisi yomsingathi ukuthi iyayithobela yini Ingxenye 15 Encanyana B, umkhiqizi wosokhaya kudingeka abonise ukuthobela Ingxenye 15 Yengxenye Engaphansi B kuyilapho amamojula adluliswayo efakiwe futhi esebenza. Amamojula kufanele adlulise, futhi ukuhlola kufanele kuqinisekise ukuthi ukukhishwa kwamabomu kwemojuli kuyahambisana (okungukuthi ukukhishwa okuyisisekelo nokungaphandle kwebhendi). Umkhiqizi osokhaya kufanele aqinisekise ukuthi azikho ezinye izinto ezikhishwayo ezingahlosiwe ezengeziwe ngaphandle kwalokho okuvunyelwe Engxenyeni 15 Engxenyeni Encane B noma ukukhishwa kuyisikhalazo nge(s)mithetho yokudlulisela. Onikezwayo uzonikeza isiqondiso kumkhiqizi wokusingatha wezidingo zeNgxenye 15 B uma kudingeka.

Inothi elibalulekile
Qaphela ukuthi noma yikuphi ukuchezuka kumapharamitha achaziwe wothi, njengoba kuchazwe imiyalelo, kudinga ukuthi umenzi womkhiqizo osokhaya azise i-COMPEX ukuthi ufisa ukushintsha ukwakheka kothi. Kulesi simo, isicelo sokushintsha imvume ye-Class II siyadingeka ukuba sibe filed nge-USI, noma umenzi womsingathi angathatha isibopho ngoshintsho lwenqubo ye-FCC ID (uhlelo olusha lohlelo lokusebenza) olulandelwa uhlelo lokusebenza loshintsho lwemvume Lwesigaba II.

Qeda Ukulebula Komkhiqizo
Uma imojula ifakiwe kudivayisi yomsingathi, ilebula ye-FCC/IC kufanele ibonakale ngefasitela kudivayisi yokugcina noma kufanele ibonakale lapho iphaneli yokufinyelela, umnyango noma ikhava iphinde isuswe kalula. Uma kungenjalo, ilebula yesibili kufanele ibekwe ngaphandle kwedivayisi yokugcina equkethe umbhalo olandelayo: “Iqukethe i-FCC ID: 2ASLRCX105-A” . Inombolo yesitifiketi se-ID ye-FCC ingasetshenziswa kuphela uma zonke izimfuneko zokuthobela i-FCC zifinyelelwa.

Qaphela

1. Uhlu lwemithetho ye-FCC esebenzayo. I-KDB 996369 D03, Isigaba 2.2 Ithobelana ne-FCC Ingxenye 15.247
2. Fingqa izimo ezithile zokusebenza zokusebenza. I-KDB 996369 D03, Isigaba 2.3 Bheka ulwazi lwe-antenna njengenhla noma imininingwane
3. Izinqubo Zemojuli Elinganiselwe. I-KDB 996369 D03, Isigaba 2.4 Bheka ulwazi lwe-antenna njengenhla noma imininingwane
4. Landelela imiklamo ye-antenna. I-KDB 996369 D03, Isigaba 2.5 Bheka ulwazi lwe-antenna njengenhla noma imininingwane
5. Ukucatshangelwa kokuchayeka kwe-RF. I-KDB 996369 D03, Isigaba 2.6 Izofakwa emikhiqizweni yabo kuphela, igama lemodeli yomsingathi: LVM G3 Hybrid.
6. Izinti KDB 996369 D03, Isigaba 2.7 Bheka ulwazi lwezimpondo njengenhla noma imininingwane
7. Ilebula nolwazi lokuhambisana. I-KDB 996369 D03, Isigaba 2.8 Refer ilebula file.

Ukufakwa Professional
Ukufakwa nokuhlakazwa kwesisetshenziswa esibulalayo kufanele kuqedwe ngonjiniyela abangochwepheshe. I-antenna ye-SRD ifakwe ngaphakathi kwekhava ye-tailgate , futhi uma idivayisi yetheminali isifakiwe, abasebenzisi abakwazi ukuvula ikhava ye-tailgate ngokuthanda kwabo. Ngenxa yokuthi ikhava ye-tailgate izofakwa ngezikulufu nezinsimbi ezikhethekile, uma ikhava ye-tailgate ivulwa ngenkani, idivayisi yetheminali izokhiqiza umcimbi wokuvula ikhava yangemuva futhi ibike umcimbi we-alamu ohlelweni lokuphatha ngeNethiwekhi.

Isexwayiso
Ukuqinisekisa ukuthobela okuqhubekayo, noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yiqembu. Umthwalo wemfanelo wokuthobelana ungasusa igunya lomsebenzisi lokusebenzisa lesi sisetshenziswa.

Isitatimende se-FCC

Lesi sisetshenziswa sithobela Ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo.

Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Isitatimende Sokuchayeka Kwemisebe ye-FCC:

• Okokusebenza kuthobelana nemikhawulo yokuchayeka ye-FCC Radiation ebekwe endaweni engalawuleki.
• Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwe-radiator nomzimba wakho.

Uhlelo Lokuhlola
Ngokuvumelana ne-KDB 996369 D01 Module Certification Guide v04, amamojula akhawulelayo adinga ukwenza uhlelo lokuhlola oluthobela imithetho ye-FCC yabasingathi betheminali ukuze babhekane namaphutha abo okubakhawulayo.

Uma kuqhathaniswa nomhlangano ophelele wokudlulisa we-RF, le mojula iyimojula enemingcele enemikhawulo elandelayo:
Ama-modular transmitter awakwazi ukunikwa amandla ngokuzimela. 2. Izidlulisi zemodular azikwazi ukuhlolwa ekucushweni okuzimele.
Kumamojula akhawulelwe angakwazi ukunikwa amandla ngokuzimela, ngokuya nge-996369 D01 Module Certification Guide v04 kanye no-15.31e, emithonjeni yemisebe yamabomu, ukuguqulwa kwamandla okufaka noma izinga lesiginali ye-radiation yengxenye yefrikhwensi ekhiqiziwe kufanele kulinganiswe lapho amandlatage ihlukahluka phakathi kuka-85% no-115% womthamo wokunikezwa kwamandla okulinganiselwe okulinganiselwetage.

Kuma-modular transmitters angakwazi ukuhlolwa ekucushweni okuzimele, umsingathi wetheminali onemojuli yasendaweni efakiwe kufanele asetshenziselwe ukuhlola nokuqopha imiphumela yokuhlolwa.

Uhlelo oluqokiwe lokuhlola lumi kanje:

1. Imodi yesimo esibi kakhulu (i-GFSK) ehloliwe ihlanganisa i-BLE ne-SRD.
2. Amaphoyinti efrikhwensi okuhlola afaka: I-BLE idinga ukuhlola imvamisa emithathu: 2402MHz, 2440MHz, kanye no-2480MHz, i-SRD idinga ukuhlola amafrikhwensi amathathu: 902.2MHz, 915MHz, kanye no-927.8MHz.
3. Izinto zokuhlola zidinga ukuhlanganisa kodwa azikhawulelwe ku-MAXIMUM PEAK DUCTED OUTPUT POWER (Ushintsho lwamandla okufakwayo kufanele lulinganiswe lapho ukunikezwa kwamandla kagesitage ihlukahluka phakathi kuka-85% no-115% womthamo wokunikezwa kwamandla okulinganiselwe okulinganiselwetage); I-20dB OBW ye-SRD, i-DTS 6DB BANDWIDTH ye-BLE, Ifaka ukukhishwa okuyinkohliso okunemisebe ene-antenna exhunywe, UKUPHUMA OKUNGAKUFUNI EMABHANDENI ENGAMkhawulelwe AMAZWI, UKUKHISHWA KWE-RADIATED SPURIOUS.
4. Ngokuhambisana nokuhlolwa okubandakanya ukukhishwa kwegesi okuyinkohliso okune-antenna exhunyiwe, ibanga lefrikhwensi yokuhlola liyi-harmonic yeshumi yefrikhwensi eyisisekelo noma engu-40 GHz, kuye ngokuthi ikuphi okuphansi, njengoba ifrikhwensi engenantambo ingaphansi kuka-10 GHz.
5. Lapho uhlola umsingathi wetheminali, kuyadingeka ukuthi uqinisekise futhi ufakazele ngokuhlolwa kwemisebe ukuthi ayikho imisebe eyengeziwe ye-parasitic noma engathobeli imithetho ebangelwa ukungena (i-oscillation ye-parasitic, imisebe yesignali elahlekile ngaphakathi komsingathi, njll.). Ngakho-ke, kuyadingeka ukulandela isiqondiso se-C63.10 ne-C63.26 ukuhlola imisebe ye-9K-30MHz, 30MHz-1GHz, ne-1GHz-18GHz, ngokulandelanayo, ukuze kuqinisekiswe ukuthi ayikho imisebe eyengeziwe ye-parasitic noma engahambisani nemithetho ebangelwa ukungena (i-oscillation ye-parasitic, imisebe yesignali elahlekile njll ngaphakathi komsingathi).
6. Ukuhlola okungenhla kusekelwe ku-C63.10 kanye ne-C63.26 njengesiqondiso.
7. Lezi zivivinyo ezingenhla zidinga ukwenziwa emshinini wokugcina.

I-Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• Ucingo:028-65706888
• Ifeksi:028-65706889
• www.kaifametering.com

Ulwazi lokuxhumana

• I-Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• Ucingo: 028-65706888
• Ifeksi: 028-65706889
• www.kaifametering.com

FAQ

Q: Iyini izinga lokushisa lokusebenza le-CX105-A RF Module?
A: Izinga lokushisa elisebenzayo lingu -25°C kuya +70°C.

Amadokhumenti / Izinsiza

I-KAIFA CX105-A RF Module [pdf] Umhlahlandlela Womsebenzisi CX105-A, 2ASLRCX105-A, 2ASLRCX105A, CX105-A RF Imojuli, CX105-A, CX105-A Imojuli, RF Imojula, Imojuli

Izithenjwa

• Imaniwali yosebenzisayo