KAIFA CX105-A RF Imodyuli

Imiyalelo yokusetyenziswa kwemveliso

Ukuhlohla

1. Khetha indawo efanelekileyo yofakelo lwemodyuli yeRF.
2. Qinisekisa uqhagamshelo lonikezelo lwamandla olululo lwenziwa ngokweenkcukacha.
3. Faka imodyuli ngokukhuselekileyo ukukhusela nayiphi na intshukumo ngexesha lokusebenza.

Uqwalaselo

1. Jonga kwincwadana yemveliso ngemimiselo ethile yoqwalaselo.
2. Seta i-frequency yokusebenza ngokusekelwe kummandla wokusetyenziswa (EU okanye NA).
3. Lungisa uhlobo lokumodareyitha kunye namandla emveliso njengoko kufuneka kwisicelo sakho.

Isondlo

1. Rhoqo jonga nawuphi na umonakalo womzimba okanye uqhagamshelo olukhululekileyo.
2. Coca imodyuli usebenzisa ilaphu elithambileyo, elomileyo ukususa naluphi na uthuli okanye inkunkuma.
3. Ukubeka iliso kumanqanaba okusetyenziswa kwamandla ukuqinisekisa ukusebenza ngokufanelekileyo.

CX105-A RF Imodyuli

• IEEE 802.15.4g-based proprietary networking
• Ukulinganisa ngobuchule
• Ukubek'esweni kunye nolawulo lwemizi-mveliso
• I-alam engenacingo kunye neenkqubo zokhuseleko
• Iziseko zophuhliso zikamasipala
• Ikhaya elihlakaniphile kunye nesakhiwo

Inkcazo

• Imodyuli yeCX105-A RF yimveliso ehambelana ne-IEEE802.15.4g SUN FSK protocol kwaye inikezelwe kwi-IEEE802.15.4g kunye ne-G3 hybrid applications.
• Kwaye i-CX105-A yimveliso yemowudi emibini, ebandakanya inxalenye ye-1G kunye ne-Bluetooth yamandla aphantsi. I-sub 1G isebenza kwi-863MHz ~ 870MHz okanye i-902MHz ~ 928MHz, kunye nenkxaso yamandla ephumayo ukuya kuthi ga kwi-+27dBm, ngelixa i-Bluetooth yamandla aphantsi isebenza kwi-2400MHz ~ 2483.5MHz, kunye nenkxaso yamandla ephumayo ukuya ku-+8dBm.
• Xa le modyuli isetyenziswa eYurophu, isebenza kwibhendi ye863MHz ~ 870MHz. Xa le modyuli isetyenziswa eMelika, isebenza kwibhendi ye902MHz ~ 928MHz.

Iimbonakalo

• Inkxaso IEEE 802.15.4g, G3 Hybrid
• Iibhendi zokuphindaphinda 863MHz ~ 870MHz okanye 902MHz ~ 928MHz
• Imowudi yokumodareyitha: FSK, GFSK
• Uvakalelo olugqwesileyo lomamkeli: 104dBm@50kbps
• Ubuninzi bamandla aphumayo: + 27dBm
• Imveliso ezenzekelayo amandla rampnge
• I-RX ezenzekelayo vuka ngenxa yamandla aphantsi mamela
• Ukuvuka ngokukhawuleza kunye ne-AGC yamandla aphantsi imamele
• Imisebenzi yokomelela kwekhonkco elingenazingcingo: Ijelo le-RF litsiba-tsiba Ukuzivuma
• I-RSSI yedijithali kunye novavanyo olucacileyo lwesiteshi se-CSMA kunye neenkqubo zokumamela-phambi kokuthetha
• Uluhlu lobushushu kwindawo -25℃~+70℃

Iinkcukacha

Iimpawu zoomatshini

Ukutya umbane
Oku kulandelayo yidatha yovavanyo lokusetyenziswa kwamandla kwezinye iimeko zesicelo esiqhelekileyo.

IiReyithingi eziphezulu ezipheleleyo
Uxinzelelo olungaphezulu kwamaxabiso adweliswe ngezantsi lunokubangela ukusilela kwesixhobo esisisigxina. Ukuvezwa kwiireyithingi ezona ziphezulu kangangexesha elongeziweyo kunokuchaphazela ukuthembeka kwesixhobo, kucuthe ixesha lokuphila kwemveliso.

Iimpawu zoMbane

I-PIN yemodyuli Inkcazo

Inkcazo yePIN

Inkcazo
Le modyuli yeCX105-A kufuneka isebenze kunye nesixhobo se-terminal, kuba unikezelo lwamandla lunikezelwa yisixhobo se-terminal, kwaye i-architecture yayo ilandelayo, kwaye i-firmware yemodyuli igcinwe kwisixhobo se-terminal kwaye unxibelelwano luqaliswe ngesixhobo se-terminal, kwaye i-eriyali yemodyuli ifakwe kwisixhobo se-terminal, apho i-signal wireless yemodyuli iya kuhanjiswa.

Uluhlu lwemithetho yeFCC esebenzayo
Le modyuli ivavanyiwe kwaye yafunyaniswa ukuba ithobela icandelo le-15 leemfuno zokuVunywa kweModyuli. Isidluliseli semodyuli kuphela iFCC egunyazisiweyo kumacandelo athile omgaqo (okt, imithetho yesithumeli seFCC) edweliswe kwisibonelelo, kwaye umenzi wemveliso engumamkeli unoxanduva lokuthobela nayiphi na eminye imigaqo yeFCC esebenza kumamkeli ongabandakanywanga yimodyuli yonikezelo lothumelo lwesiqinisekiso. Ukuba lowo unikwe isibonelelo uthengisa imveliso yakhe njengeSahlulo se-15 esithobelayo (xa sikwaqulathe iradiyetha engeyoyanjongo yomjikelezo wedijithali), ngoko umxhasi uya kubonelela ngesaziso esichaza ukuba imveliso yokugqibela yomamkeli lisafuna iCandelo le-15 lovavanyo lokuthobela kunye nesidluliseli semodyuli efakiweyo.

Ulwazi lweManuwali kuMsebenzisi wokugqibela
Umdibanisi we-OEM kufuneka aqonde ukuba angaboneleli kumsebenzisi wokugqibela malunga nendlela yokufaka okanye ukususa le modyuli yeRF kwincwadana yomsebenzisi yemveliso yokugqibela edibanisa le modyuli. Incwadi yomsebenzisi wokugqibela iya kubandakanya zonke iinkcukacha ezifunekayo zolawulo/isilumkiso njengoko kubonisiwe kule ncwadana.

I-antenna

1. I-eriyali kufuneka ifakwe ngendlela yokuba i-20 cm igcinwe phakathi kwe-eriyali kunye nabasebenzisi.
2. Imodyuli yothumelo ayinakubekwa ndawonye kunye naso nasiphi na esinye isidluliseli okanye i-eriyali.

Kwimeko apho le miqathango ayinakufezekiswa (umzekeloampkuqwalaselo oluthile lwelaptop okanye ukudityaniswa kwesinye isidluliseli), emva koko ugunyaziso lweFCC alusathathwa njengelisemthethweni, kwaye i-ID yeFCC ayinakusetyenziswa kwimveliso yokugqibela. Kwezi meko, umdibanisi we-OEM uya kuba noxanduva lokuphonononga kwakhona imveliso yokugqibela (kubandakanywa ne-transmitter) kunye nokufumana isigunyaziso seFCC esahlukileyo.

Ukuthobela imimiselo yeFCC ethintela omabini awona mandla aphezulu e-RF aphumayo kunye nokuba sesichengeni somntu kwi-radiation ye-RF, inzuzo ephezulu ye-eriyali (kuquka ilahleko yentambo) mayingadluli.

Iimfuno zoyilo lwe-antenna

1. I-RF-line idinga i-50Ω i-impedance yomgca omnye;
2. I-Antenna ye-BLE yi-2.4G ye-Bluetooth yebhendi ye-PCB yebhodi ye-eriyali;
3. Ubude be-antenna, ububanzi, imilo (s) ngolu hlobo lulandelayo, Inkampani: mm;
4. Ubukhulu bePCB yi-1.6mm, iCopper-Layer 4, iAntenna yiLayer1;
5. I-antenna ibekwe emphethweni wePCB，Ukucoca ngeenxa zonke nangaphantsi;
6. I-Antenna ye-SRD yi-902-928MHz ISM frequency band;
7. Ubude be-antenna, ububanzi, imilo ngolu hlobo lulandelayo, Inkampani: mm.
8. Izibuko le-RF yemveliso yemodyuli iqhagamshelwe kujongano lwe-SMA ngomgca we-microstrip kumaleko wokuqala wesixhobo se-terminal PCB, emva koko iqhagamshelwe kwi-eriyali ye-SDR.

I-OEM/I-Integrators yoFakelo lweNcwadana

Isaziso esiBalulekileyo kubadibanisi be-OEM

1. 1. Le modyuli ilinganiselwe kufakelo lwe-OEM KUPHELA.
2. Le modyuli ilinganiselwe kufakelo kwiinkqubo eziphathwayo okanye ezisisigxina, ngokweCandelo 2.1091(b).
3. Ulwamkelo olwahlukileyo luyafuneka kulo lonke olunye ulungelelwaniso lokusebenza, kubandakanywa uqwalaselo oluphathekayo ngokubhekiselele kwiCandelo 2.1093 kunye nohlengahlengiso olwahlukileyo lwe-eriyali.

KwiFCC iSigaba 15.31 (h) kunye (k): Umenzi womkhosi unoxanduva lovavanyo olongezelelweyo ukuqinisekisa ukuthotyelwa njengenkqubo edibeneyo. Xa uvavanya isixhobo sokusingatha ukuthobela iNxalenye ye-15, umamkeli kufuneka abonise ukuthobela iSahlulo se-15 seCandelo B ngelixa i(ii)modyuli zothumelo zifakiwe kwaye zisebenza. Iimodyuli kufuneka zigqithise, kwaye uvandlakanyo kufuneka luqinisekise ukuba ukukhutshwa ngabom kwemodyuli kuyahambelana (okt ukukhutshwa okusisiseko kunye nokungaphandle kwebhendi). Umvelisi ongumamkeli kufuneka aqinisekise ukuba akukho nto ikhutshwayo eyongezelelekileyo ebingenziwanga ngabom ngaphandle kokuvunyelwa kwiSahlulo se-15 seCandelwana B okanye izinto ezikhutshwayo zinesikhalazo ngo(imi)sithumeli (ii)mithetho. Lowo unikwe iSibonelelo uya kubonelela ngesikhokelo kumvelisi womninimzi kwiimfuno zeSigaba se-15 B ukuba siyafuneka.

Inqaku elibalulekileyo
Qaphela ukuba nakuphi na ukutenxa kwiiparamitha ezichaziweyo ze-eriyali, njengoko ichazwe yimiyalelo, ifuna ukuba umenzi wemveliso yomninimzi makazise kwiCOMPEX ukuba unqwenela ukutshintsha uyilo lwe-eriyali. Kule meko, i-Class II yesicelo sokutshintsha imvume kufuneka ibe filed yi-USI, okanye umenzi womkhosi unokuthatha uxanduva ngotshintsho kwi-ID ye-FCC (isicelo esitsha) inkqubo elandelwa yi-Class II yesicelo sokutshintsha kwemvume.

Phelisa ukuleyibhelishwa kweMveliso
Xa imodyuli ifakwe kwisixhobo sokusingatha, ileyibhile yeFCC / IC kufuneka ibonakale ngefestile kwisixhobo sokugqibela okanye kufuneka ibonakale xa iphaneli yokufikelela, umnyango okanye ikhava iphinda ihanjiswe kwakhona. Ukuba akunjalo, ileyibhile yesibini mayibekwe kumphandle wesixhobo sokugqibela esinala magama alandelayo: “Ine-ID yeFCC: 2ASLRCX105-A” . Inombolo yeSatifikethi seSazisi seFCC ingasetyenziswa kuphela xa zonke iimfuno zokuthotyelwa kweFCC ziphunyeziwe.

Phawula

1. Uluhlu lwemithetho yeFCC esebenzayo. I-KDB 996369 D03, iCandelo 2.2 lithobela iFCC Icandelo 15.247
2. Shwankathela iimeko ezithile zokusetyenziswa komsebenzi. KDB 996369 D03, Icandelo 2.3 Jonga kulwazi lwe-eriyali njengoko ngasentla okanye iinkcukacha
3. IiNkqubo zeModyuli eziNcinane. KDB 996369 D03, Icandelo 2.4 Jonga kulwazi lwe-eriyali njengoko ngasentla okanye iinkcukacha
4. Landela uyilo lwe-eriyali. KDB 996369 D03, Icandelo 2.5 Jonga kulwazi lwe-eriyali njengoko ngasentla okanye iinkcukacha
5. Iingqwalaselo zokuvezwa kweRF. KDB 996369 D03, Icandelo 2.6 Iza kufakwa kwiimveliso zabo kuphela, igama lemodeli yomkhosi: LVM G3 Hybrid.
6. Ii-eriyali KDB 996369 D03, Icandelo 2.7 Jonga kulwazi lwe-eriyali njengoko kungentla okanye iinkcukacha
7. Ilebhile kunye nolwazi lokuthotyelwa. I-KDB 996369 D03, iCandelo 2.8 Ileyibhile yokuthumela file.

UFakelo lobuNgcali
Ukufakwa kunye nokuchithwa kwesixhobo se-terminal kufuneka kugqitywe ngeenjineli eziqeqeshiweyo. I-eriyali ye-SRD ifakwe ngaphakathi kwikhava ye-tailgate, kwaye xa isixhobo se-terminal sifakiwe, abasebenzisi abanakuvula isigqubuthelo se-tailgate ngokuthanda kwabo. Ngenxa yokuba i-tailgate cover iya kufakwa kunye nezikrufu kunye namatywina akhethekileyo, ukuba i-tailgate cover ivuliwe ngenkani, isixhobo se-terminal siya kuvelisa isiganeko sokuvula i-tailgate cover kwaye ingxelo isiganeko se-alarm kwinkqubo yolawulo nge-Network.

Isilumkiso
Ukuqinisekisa ukuthotyelwa okuqhubekayo, naluphi na utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela. Uxanduva lokuthobela lunokutshitshisa igunya lomsebenzisi lokusebenzisa esi sixhobo.

Ingxelo yeFCC

Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela ukusebenza okungafunekiyo.

PHAWULA: Esi sixhobo sivavanyiwe saza safunyanwa ukuba sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yemithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okunobungozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo.

Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

INkcazelo yokuVela kwiMitha yeFCC:

• Isixhobo sithobela imiqathango yeFCC Radiation exposure emiselwe indawo engalawulwayo.
• Esi sixhobo kufuneka sifakwe kwaye sisebenze kumgama ongaphantsi kwama-20cm phakathi kweradiyetha kunye nomzimba wakho.

Isicwangciso soVavanyo
Ngokwe-KDB 996369 D01 yeSikhokelo seSiqinisekiso seModyuli v04, iimodyuli ezithintelweyo kufuneka zenze isicwangciso sovavanyo esithobelana nemigaqo yeFCC yeenginginya zetheminali ukujongana neziphene zabo ezithintelweyo.

Xa kuthelekiswa nendibano epheleleyo yosasazo yeRF, le modyuli yimodyuli ethintelayo enale mida ilandelayo:
Izithuthi zeemodyuli azinakunikwa amandla ngokuzimeleyo. 2. Iimodyuli ezihambisa iimodyuli azikwazi ukuvavanywa kulungelelwaniso oluzimeleyo.
Kwiimodyuli ezithintelweyo ezingakwaziyo ukuzimela ngokuzimeleyo, ngokwe-996369 D01 yeSikhokelo seSiqinisekiso seModyuli v04 kunye ne-15.31e, kwimithombo yosasazo ngabom, utshintsho lwamandla egalelo okanye inqanaba lophawu lwemitha yecandelo elikhutshwayo elisisiseko kufuneka lilinganiswe xa umbane wombane.tage yahluka phakathi kwe-85% kunye ne-115% yonikezelo lombane olulinganisiweyo ngegamatage.

Ukuhanjiswa kweemodyuli ezingenakho ukuvavanywa kuqwalaselo oluzimeleyo, i-terminal host enemodyuli yasekhaya efakiweyo kufuneka isetyenziswe ukuvavanya nokurekhoda iziphumo zovavanyo.

Isicwangciso esimiselweyo sovavanyo ngolu hlobo lulandelayo:

1. Eyona ndlela imbi kakhulu yokumodareyitha (GFSK) evavanyiweyo ibandakanya i-BLE kunye ne-SRD.
2. Amanqaku ovavanyo abandakanya: I-BLE idinga ukuvavanya amaxesha amathathu: 2402MHz, 2440MHz, kunye ne-2480MHz, i-SRD idinga ukuvavanya amaxesha amathathu: 902.2MHz, 915MHz, kunye ne-927.8MHz.
3. Izinto zokuvavanya kufuneka zibandakanye kodwa zingaphelelanga kwi-MAXIMUM PEAK DUCTED OUTPUT AMANDLA (Utshintsho kumandla okufakwayo kufuneka lulinganiswe xa umbane wombane.tage yahluka phakathi kwe-85% kunye ne-115% yonikezelo lombane olulinganisiweyo ngegamatage); I-20dB OBW ye-SRD, i-DTS 6DB BANDWIDTH ye-BLE, Bandakanya izinto ezikhutshwayo eziyinkohliso ezineeriyali eziqhagamshelwe, IMIPHUMELA ENGAFANEKIYO KUMABHANDO ENGAMthinteliyo we-FRREQUENCY, UKUKHUTSHWA KWE-RADIATED SPURIOUS.
4. Ngokuhambelana novavanyo lokubandakanya ukukhutshwa kwemitha eyinkohliso kunye ne-eriyali eqhagamshelweyo, uluhlu lwamaza ovavanyo luyi-harmonic yeshumi yeyona ndawo iphakamileyo okanye i-40 GHz, nokuba yeyiphi esezantsi, njengoko i-wireless frequency ingaphantsi kwe-10 GHz.
5. Xa uvavanya i-terminal host, kuyimfuneko ukuqinisekisa kunye nokuqinisekisa ngovavanyo lwe-radiation ukuba akukho mitha eyongezelelweyo ye-parasitic okanye engahambelaniyo ebangelwa yi-intrusion (i-oscillation ye-parasitic, i-radiation ye-stray elahlekileyo ngaphakathi komkhosi, njl.). Ngoko ke, kuyimfuneko ukulandela isikhokelo se-C63.10 kunye ne-C63.26 ukuvavanya i-radiation ye-9K-30MHz, i-30MHz-1GHz, kunye ne-1GHz-18GHz, ngokulandelelana, ukuqinisekisa ukuba akukho imitha ye-parasitic eyongezelelweyo okanye engahambelaniyo ebangelwa yi-intrusion (i-oscillation ye-parasitic, i-radiation yesignali elahlekileyo ngaphakathi komkhosi, njl.
6. Ezi mvavanyo zingentla zisekelwe kwi-C63.10 kunye ne-C63.26 njengesikhokelo.
7. Olu vavanyo lungentla kufuneka lwenziwe kumatshini wetheminali.

I-Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• Umnxeba: 028-65706888
• Ifeksi: 028-65706889
• www.kaifametering.com

Iinkcukacha zoqhakamshelwano

• I-Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• Umnxeba: 028-65706888
• Ifeksi: 028-65706889
• www.kaifametering.com

FAQ

Q: Yintoni ubushushu bokusebenza uluhlu lwe CX105-A RF Module?
A: Uluhlu lobushushu obusebenzayo yi -25°C ukuya +70°C.

Amaxwebhu / Izibonelelo

KAIFA CX105-A RF Imodyuli [pdf] Isikhokelo somsebenzisi CX105-A, 2ASLRCX105-A, 2ASLRCX105A, CX105-A RF Imodyuli, CX105-A, CX105-A Imodyuli, iModyuli yeRF, iModyuli

Iimbekiselo

• Incwadi yokusebenzisa