KAIFA CX105-A RF Module

Umarnin Amfani da samfur

Shigarwa

1. Zaɓi wurin da ya dace don shigar da tsarin RF.
2. Tabbatar cewa an samar da hanyoyin samar da wutar lantarki daidai da ƙayyadaddun bayanai.
3. Shigar da tsarin amintacce don hana kowane motsi yayin aiki.

Kanfigareshan

1. Koma zuwa littafin jagorar samfur don takamaiman saitunan saituna.
2. Saita mitar aiki bisa yankin amfani (EU ko NA).
3. Daidaita nau'in daidaitawa da ƙarfin fitarwa kamar yadda ake buƙata don aikace-aikacenku.

Kulawa

1. Bincika akai-akai don kowace lalacewa ta jiki ko sako-sako da haɗin kai.
2. Tsaftace samfurin ta amfani da laushi, bushe bushe don cire duk wata ƙura ko tarkace.
3. Saka idanu matakan amfani da wutar lantarki don tabbatar da ingantaccen aiki.

Saukewa: CX105-A

• IEEE 802.15.4g na tushen sadarwar mallakar mallaka
• Smart metering
• Sa ido da sarrafawa na masana'antu
• Ƙararrawa mara waya da tsarin tsaro
• Municipal kayayyakin more rayuwa
• Smart gida da gini

Bayani

• Tsarin CX105-A RF samfuri ne wanda ya dace da ka'idar IEEE802.15.4g SUN FSK kuma an sadaukar da shi ga aikace-aikacen IEEE802.15.4g da G3.
• Kuma CX105-A samfuri ne na yanayin dual, wanda ya haɗa da wani yanki na 1G da ƙaramin ƙarfin Bluetooth. Ƙarshen 1G yana aiki a 863MHz ~ 870MHz ko 902MHz ~ 928MHz, tare da goyon bayan wutar lantarki har zuwa +27dBm, yayin da ƙananan makamashi na Bluetooth yana aiki a 2400MHz ~ 2483.5MHz, tare da goyon bayan wutar lantarki har zuwa + 8dBm.
• Lokacin da ake amfani da wannan ƙirar a Turai, yana aiki a cikin band 863MHz ~ 870MHz. Lokacin da ake amfani da wannan ƙirar a cikin Amurka, yana aiki a cikin band 902MHz ~ 928MHz.

Siffofin

• Taimako IEEE 802.15.4g, G3 Hybrid
• Makadan mitar 863MHz ~ 870MHz ko 902MHz ~ 928MHz
• Yanayin canzawa: FSK, GFSK
• Kyakkyawan azancin mai karɓa: 104dBm@50kbps
• Matsakaicin ikon fitarwa: + 27 dBm
• Fitarwa ta atomatik wuta ramping
• RX ta atomatik farkawa don ƙaramin ƙarfi saurare
• Da sauri farkawa da AGC don ƙaramin iko saurare
• Ayyuka don ƙarfin haɗin mara waya: RF tashar hopping Auto-yarda
• Digital RSSI da share tantancewar tashar don CSMA da tsarin saurare-kafin-magana
• Yanayin zafin jiki na yanayi: -25 ℃ ~ + 70 ℃

Ƙayyadaddun bayanai

Halayen injina

Amfanin Wuta
Mai zuwa shine bayanan gwajin amfani da wutar lantarki na wasu al'amuran aikace-aikace na yau da kullun.

Cikakkun Mahimman Kima
Matsi sama da ƙimar da aka lissafa a ƙasa na iya haifar da gazawar na'urar dindindin. Bayyanawa zuwa cikakkiyar ƙimar ƙima na tsawon lokaci na iya shafar amincin na'urar, rage lokacin rayuwar samfur.

Halayen Lantarki

Ma'anar PIN na Module

Bayanin PIN

Bayani
Wannan CX105-A module yana buƙatar yin aiki tare da na'urar tashoshi, saboda wutar lantarki tana samar da na'urar tashoshi, kuma tsarin gine-ginen shi ne kamar haka, kuma ana adana na'urar firmware a cikin na'urar ta tashar kuma ana ƙaddamar da sadarwa ta na'urar, kuma an shigar da eriya na module ɗin akan na'urar, ta inda za a watsa siginar mara waya ta module.

Jerin dokokin FCC masu aiki
An gwada wannan tsarin kuma an samo shi don biyan buƙatun sashi na 15 don Amincewar Modular. Mai watsawa na yau da kullun FCC ce kawai ke da izini don takamaiman sassa na ƙa'ida (watau, dokokin watsawa na FCC) da aka jera akan tallafin, kuma cewa masana'anta samfurin suna da alhakin bin duk wasu dokokin FCC waɗanda suka shafi mai watsa shiri wanda ba a rufe shi ta hanyar tallafin takaddun shaida na zamani. Idan mai bayarwa ya tallata samfuran su azaman Sashe na 15 Subpart B mai yarda (lokacin da kuma ya ƙunshi da'irar radiyo na dijital ba da gangan ba), to mai bayarwa zai ba da sanarwar da ke nuna cewa samfurin ƙarshe na ƙarshe har yanzu yana buƙatar Sashe na 15 Subpart B gwajin yarda tare da na'urar watsawa ta zamani da aka shigar.

Bayanin Manual zuwa Mai amfani na Ƙarshe
Mai haɗin OEM dole ne ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF ɗin a cikin littafin jagorar ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.

Eriya

1. Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani.
2. Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.

A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko haɗin gwiwa tare da wani mai watsawa), sannan ba a ɗaukar izinin FCC mai aiki, kuma ba za a iya amfani da ID na FCC akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance alhakin sake kimanta samfurin ƙarshe (ciki har da mai watsawa) da samun izini na FCC daban.

Don biyan ka'idojin FCC waɗanda ke iyakance duka iyakar ƙarfin fitarwa na RF da bayyanar ɗan adam zuwa radiation RF, matsakaicin ribar eriya (gami da asarar kebul) dole ne ya wuce.

Bukatun ƙirar eriya

1. RF-line yana buƙatar 50Ω impedance guda ɗaya;
2. BLE Eriya ita ce 2.4G Bluetooth mitar band PCB eriyar hukumar;
3. Tsawon eriya, nisa, siffar (s) kamar haka, Kamfanin: mm;
4. PCB kauri ne 1.6mm, Copper-Layer 4, Eriya ne Layer1;
5. Eriya ta sa a gefen PCB, Clearance a kusa da ƙasa;
6. SRD Eriya shine 902-928MHz ISM mita band;
7. Tsawon eriya, faɗi, siffar (s) kamar haka, Kamfanin: mm.
8. Ana haɗa tashar fitarwa ta RF ta module zuwa ƙirar SMA ta layin microstrip akan layin farko na na'urar PCB, sannan an haɗa ta da eriyar SDR.

OEM/Integrators Installation Manual

Muhimmiyar Sanarwa ga masu haɗa OEM

1. 1. Wannan tsarin yana iyakance ga shigarwar OEM KAWAI.
2. Wannan tsarin yana iyakance ga shigarwa a cikin wayar hannu ko ƙayyadaddun aikace-aikace, bisa ga Sashe na 2.1091(b).
3. Ana buƙatar yarda daban don duk sauran saitunan aiki, gami da daidaitawa mai ɗaukar hoto dangane da Sashe na 2.1093 da saitunan eriya daban-daban.

Don FCC Sashe na 15.31 (h) da (k): Mai sana'anta mai watsa shiri yana da alhakin ƙarin gwaji don tabbatar da yarda a matsayin tsarin haɗin gwiwa. Lokacin gwada na'urar mai watsa shiri don yarda da Sashe na 15 Ƙarshen B, ana buƙatar masana'anta don nuna yarda da Sashe na 15 Ƙarshen B yayin da ake shigar da module(s) masu watsawa da aiki. Ya kamata na'urorin su kasance suna watsawa, kuma kimantawa yakamata su tabbatar da cewa fitar da gangan na module ɗin ya dace (watau ƙaƙƙarfan ƙaƙƙarfan hayaƙi da waje). Dole ne mai samar da masauki ya tabbatar da cewa babu ƙarin hayaƙin da ba da niyya ba sai abin da aka ba da izini a cikin Sashe na 15 Ƙararren Sashe na B ko fitar da ƙararraki tare da tsarin (s) masu watsawa. Mai bayarwa zai ba da jagora ga mai ƙira don buƙatun Sashe na 15 B idan an buƙata.

Muhimmiyar Bayani
Lura cewa duk wani sabani(s) daga ma'auni na eriya, kamar yadda aka bayyana ta umarnin, yana buƙatar mai sana'anta samfurin ya sanar da COMPEX cewa suna son canza ƙirar eriya. A wannan yanayin, ana buƙatar aikace-aikacen canji na Class II don zama filed ta USI, ko masana'anta na iya ɗaukar nauyi ta hanyar canji a cikin FCC ID (sabon aikace-aikacen) tsarin da aikace-aikacen canji na Class II ke bi.

Ƙarshen Lakabin Samfura
Lokacin da aka shigar da na'urar a cikin na'urar mai watsa shiri, alamar FCC/IC dole ne a ganuwa ta taga akan na'urar ƙarshe ko kuma dole ne a bayyane lokacin da aka sake motsa sashin shiga, kofa ko murfin cikin sauƙi. Idan ba haka ba, dole ne a sanya tambari na biyu a wajen na'urar ta ƙarshe wadda ta ƙunshi rubutu mai zuwa: "Ya ƙunshi ID na FCC: 2ASLRCX105-A" . Za a iya amfani da Lambar Takaddar ID na FCC kawai lokacin da aka cika duk buƙatun yarda da FCC.

Lura

1. Jerin dokokin FCC masu aiki. KDB 996369 D03, Sashe na 2.2 Yayi Daidai da FCC Sashe na 15.247
2. Taƙaita takamaiman yanayin amfani na aiki. KDB 996369 D03, Sashe na 2.3 Koma zuwa bayanan eriya kamar na sama ko ƙayyadaddun bayanai
3. Tsare-tsaren Module masu iyaka. KDB 996369 D03, Sashe na 2.4 Koma zuwa bayanin eriya kamar yadda yake sama ko ƙayyadaddun bayanai
4. Alamar ƙirar eriya. KDB 996369 D03, Sashe na 2.5 Koma zuwa bayanin eriya kamar yadda yake sama ko ƙayyadaddun bayanai
5. Abubuwan la'akari da bayyanar RF. KDB 996369 D03, Sashe na 2.6 Za a shigar da shi a cikin samfuran nasu kawai, sunan samfurin rundunar: LVM G3 Hybrid.
6. Eriya KDB 996369 D03, Sashe na 2.7 Koma zuwa bayanan eriya kamar na sama ko ƙayyadaddun bayanai
7. Alamar alama da bayanin yarda. KDB 996369 D03, Sashe na 2.8 Alamar Magana file.

Ƙwararrun Shigarwa
Dole ne injiniyoyi ƙwararrun su cika shigarwa da ƙaddamar da na'urar tasha. An shigar da eriyar SRD a cikin murfin wutsiya, kuma da zarar an shigar da na'urar tasha, masu amfani ba za su iya buɗe murfin wut ɗin yadda suke so ba. Saboda za a shigar da murfin wutsiya tare da sukurori da hatimi na musamman, idan an buɗe murfin wutsiya da karfi, na'urar ta ƙare za ta haifar da buɗewar murfin wutsiya kuma ta ba da rahoton taron ƙararrawa ga tsarin gudanarwa ta hanyar hanyar sadarwa.

Gargadi
Don tabbatar da ci gaba da bin doka, duk wani canje-canje ko gyare-gyaren da jam'iyyar ba ta amince da su ba. Wanda ke da alhakin yin biyayya zai iya ɓata ikon mai amfani don sarrafa wannan kayan aikin.

Bayanin FCC

Wannan kayan aikin ya dace da Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

NOTE: An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo.

Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Bayanin Bayyanar Radiation na FCC:

• Kayan aikin sun cika FCC iyakokin fiddawa Radiation da aka tsara don muhalli mara sarrafawa.
• Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo da jikinka.

Shirin Gwaji
Dangane da KDB 996369 D01 Module Takaddun Takaddun Shaidawa Jagora v04, ƙayyadaddun kayayyaki suna buƙatar haɓaka shirin gwaji wanda ya bi ka'idodin FCC don runduna ta ƙarshe don magance nasu lahani.

Idan aka kwatanta da cikakken taron watsawa na RF, wannan ƙirar ƙira ce mai takurawa tare da iyakoki masu zuwa:
Ba za a iya kunna masu watsawa na zamani ba. 2. Ba za a iya gwada masu watsawa na zamani ba a cikin saitunan masu zaman kansu.
Don ƙayyadaddun kayayyaki waɗanda ba za a iya kunna su da kansu ba, bisa ga 996369 D01 Module Certification Guide v04 da 15.31e, don tushen radiation da gangan, canjin ƙarfin shigarwa ko matakin siginar radiation na ɓangaren mitar da aka fitar ya kamata a auna lokacin da wutar lantarki vol.tage ya bambanta tsakanin 85% da 115% na ƙididdigan ƙididdiga na samar da wutar lantarki voltage.

Don masu watsawa na yau da kullun waɗanda ba za a iya gwada su a cikin tsari mai zaman kansa ba, ya kamata a yi amfani da mai watsa shiri tare da tsarin gida da aka shigar don gwadawa da rikodin sakamakon gwajin.

Shirin gwajin da aka zayyana shine kamar haka:

1. Mafi munin yanayin daidaitawa (GFSK) wanda aka gwada ya haɗa da BLE da SRD.
2. Makiyoyin mitar don gwaji sun haɗa da: BLE yana buƙatar gwada mita uku: 2402MHz, 2440MHz, da 2480MHz, SRD yana buƙatar gwada mitar uku: 902.2MHz, 915MHz, da 927.8MHz.
3. Abubuwan gwajin suna buƙatar haɗawa amma ba'a iyakance su zuwa WUTA KYAUTA DUCED WUTA (Ya kamata a auna canjin ikon shigar da wutar lantarki lokacin da ƙarfin wutar lantarki ya ƙare.tage ya bambanta tsakanin 85% da 115% na ƙididdigan ƙididdiga na samar da wutar lantarki voltage); 20dB OBW na SRD, DTS 6DB BANDWIDTH don BLE, Haɗe da hayaki mai banƙyama tare da haɗin eriya, ɓangarorin da ba'a so a cikin maɗaurin mitar da ba a ƙullawa ba, KYAUTA MAI SAUKI.
4. Daidai da gwajin haɗe da hayaƙi mai ban tsoro tare da haɗin eriya, kewayon gwajin gwaji shine jitu na goma mafi girman mitar tushe ko 40 GHz, kowace ƙasa, saboda mitar mara waya bai wuce 10 GHz ba.
5. Lokacin gwada mai masaukin tashar, ya zama dole don tabbatarwa da tabbatarwa ta hanyar gwajin radiation cewa babu ƙarin parasitic ko radiation mara izini wanda ke haifar da kutse (parasitic oscillation, ɓataccen siginar siginar cikin gidan, da sauransu). Don haka wajibi ne a bi tsarin C63.10 da C63.26 don gwada hasken 9K-30MHz, 30MHz-1GHz, da 1GHz-18GHz, bi da bi, don tabbatar da cewa babu wani ƙarin parasitic ko radiyon da ba a yarda da shi ba wanda ke haifar da kutse (parasitic oscillation, stray signal radiation a cikin rundunar, da sauransu).
6. Gwaje-gwajen da ke sama sun dogara ne akan C63.10 da C63.26 azaman jagora.
7. Ana buƙatar gwaje-gwajen da ke sama akan na'urar tasha.

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• Tel: 028-65706888
• Fax: 028-65706889
• www.kaifametering.com

Bayanin hulda

• Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
• No.99 Tianquan Rd., Hi-Tech Development Zone, Chengdu, PRC
• TelSaukewa: 028-65706888
• FaxSaukewa: 028-65706889
• www.kaifametering.com

FAQ

Q: Menene kewayon zafin aiki na CX105-A RF Module?
A: Yanayin zafin aiki shine -25 ° C zuwa + 70 ° C.

Takardu / Albarkatu

KAIFA CX105-A RF Module [pdf] Jagorar mai amfani CX105-A, 2ASLRCX105-A, 2ASLRCX105A, CX105-A RF Module, CX105-A, CX105-A Module, RF Module, Module

Magana

• Manual mai amfani