I-EDA ED-HMI3010-101C I-Raspberry Pi Technology Platform

Imininingwane:

• Imodeli Yomkhiqizo: ED-HMI3010-101C
• Umkhiqizi: EDA Technology Co., LTD
• Isicelo: IOT, ukulawula izimboni, ezishintshayo, amandla aluhlaza, intelligence yokufakelwa
• I-Platform Esekelwe: I-Raspberry Pi
• Ulwazi lokuxhumana:
  • Ikheli: Room 301, Building 24, No.1661 Jialuo Highway, Jiading District, Shanghai
  • I-imeyili: sales@edatec.cn
  • Ucingo: +86-18217351262
  • Webindawo: https://www.edatec.cn
  • Ukusekela kwezobuchwepheshe:
    • I-imeyili: support@edatec.cn
    • Ucingo: +86-18627838895
    • Wechat: zzw_1998-

Imiyalo yokusetshenziswa komkhiqizo

Ukufakwa:
Ukufaka i-ED-HMI3010-101C, landela lezi zinyathelo:

1. Qinisekisa ukuthi indawo ezungezile ihlangabezana nezicaciso zedizayini.
2. Lungisa okokusebenza ngokuphephile ukuze uvimbele ukuwa.

Qalisa:
Ukuze uqale ukusebenzisa umkhiqizo:

1. Bheka kumanuwali yomsebenzisi ukuze uthole imiyalelo enemininingwane yokuqalisa.

Ukucushwa:
Lungiselela umkhiqizo ngokulandela lezi zinyathelo:

1. Bheka kumhlahlandlela wohlelo lokusebenza ukuze uthole imininingwane yokumisa.

Isondlo

Ukunakekela umkhiqizo:

1. Gwema ukusebenzisa izinto zokuhlanza uketshezi.
2. Gcina umkhiqizo kude noketshezi nezinto ezivuthayo.

I-FAQ:

• Q: Yini okufanele ngiyenze uma umkhiqizo wehluleka ukuqala?
  IMP: Uma umkhiqizo wehluleka ukuqalisa, sicela uhlole umthombo wamandla nezixhumi kuqala. Bheka kumanuwali yomsebenzisi ngezinyathelo zokuxazulula inkinga.
• Q: Ngingakwazi ukulungisa okokusebenza ukuze ngenze ngokwezifiso?
  IMP: Akunconywa ukuguqula okokusebenza ngaphandle kwemvume njengoba kungase kuholele ekwehlulekeni kwemishini futhi kuqede iwaranti.
• Umbuzo: Ngiluthola kanjani usizo lobuchwepheshe?
  IMP: Ngosizo lobuchwepheshe, ungasithinta nge-imeyili kokuthi support@edatec.cn noma shayela +86-18627838895.

ED-HMI3010-101C
Umhlahlandlela Wohlelo Lokusebenza
I-EDA Technology Co., LTD ngo-December 2023

Xhumana nathi

• Siyabonga kakhulu ngokuthenga nokusebenzisa imikhiqizo yethu, futhi sizokukhonza ngenhliziyo yonke.
• Njengomunye wozakwethu bomklamo womhlaba wonke we-Raspberry Pi, sizibophezele ekuhlinzekeni ngezixazululo zezingxenyekazi zekhompuyutha ze-IOT, ukulawulwa kwezimboni, ezishintshayo, amandla aluhlaza kanye nobuhlakani bokwenziwa okusekelwe kupulatifomu yobuchwepheshe ye-Raspberry Pi.
• Ungaxhumana nathi ngezindlela ezilandelayo:
  • I-EDA Technology Co., LTD
  • Ikheli: Room 301, Building 24, No.1661 Jialuo Highway, Jiading District, Shanghai
  • Imeyili: sales@edatec.cn
  • Ucingo: +86-18217351262
  • Webindawo: https://www.edatec.cn
• Ukusekela kwezobuchwepheshe:
  • Imeyili: support@edatec.cn
  • Ucingo: +86-18627838895
  • Wechat: zzw_1998-

Isitatimende se-copyright

• I-ED-HMI3010-101C kanye namalungelo ayo empahla yobuhlakani ahlobene aphethwe yi-EDA Technology Co.,LTD.
• I-EDA Technology Co., LTD ingumnikazi welungelo lobunikazi lalo mbhalo futhi igodle wonke amalungelo. Ngaphandle kwemvume ebhaliwe ye-EDA Technology Co.,LTD, ayikho ingxenye yalo mbhalo engashintshwa, isatshalaliswe noma ikopishwe nganoma iyiphi indlela noma nganoma iyiphi indlela.

Umshwana wokuzihlangula

I-EDA Technology Co.,LTD ayiqinisekisi ukuthi ulwazi olukule manuwali lusesikhathini samanje, lulungile, luphelele noma lusezingeni eliphezulu. I-EDA Technology Co.,LTD futhi ayiqinisekisi ukusetshenziswa okwengeziwe kwalolu lwazi. Uma ukulahlekelwa kwempahla noma okungeyona into ehlobene kubangelwe ukusebenzisa noma ukungalusebenzisi ulwazi olukule manuwali, noma ngokusebenzisa ulwazi olungalungile noma olungaphelele, inqobo nje uma kungenabufakazi bokuthi kuyinhloso noma ubudedengu be-EDA Technology Co., LTD, isimangalo sesikweletu se-EDA Technology Co.,LTD singakhululwa. I-EDA Technology Co.,LTD igodla ngokusobala ilungelo lokushintsha noma ukwengeza okuqukethwe noma ingxenye yaleli bhukwana ngaphandle kwesaziso esikhethekile.

Isandulelo

Amabhukwana Ahlobene
Zonke izinhlobo zemibhalo yomkhiqizo equkethwe kumkhiqizo ziboniswa kuthebula elilandelayo, futhi abasebenzisi bangakhetha ukwenza kanjalo view imibhalo ehambisanayo ngokwezidingo zabo.

Amadokhumenti	Isiyalezo
Idatha ye-ED-HMI3010-101C	Lo mbhalo wethula izici zomkhiqizo, isofthiwe nokucaciswa kwezingxenyekazi zekhompuyutha, ubukhulu namakhodi oku-oda we-ED-HMI3010-101C ukuze usize abasebenzisi baqonde iyonke imingcele yesistimu yemikhiqizo.
ED-HMI3010-101C Incwadi Yomsebenzisi	Lo mbhalo wethula ukubukeka, ukufakwa, ukuqalisa kanye nokucushwa kwe-ED-HMI3010-101C ukuze usize abasebenzisi basebenzise umkhiqizo kangcono.
ED-HMI3010-101C Umhlahlandlela Wokufaka Isicelo	Lo mbhalo wethula ukulanda kwe-OS, ukukhanya kwe-SD kanye nekesi yedivayisi evulekile/yokuvala ye-ED-HMI3010-101C ukuze usize abasebenzisi basebenzise umkhiqizo kangcono.

Abasebenzisi bangavakashela okulandelayo webisayithi ukuze uthole ulwazi olwengeziwe: https://www.edatec.cn

I-Reader Scope

Leli bhukwana lisebenza kubafundi abalandelayo:

• Unjiniyela Wemishini
• Unjiniyela Kagesi
• Unjiniyela Wesoftware
• Unjiniyela Wesistimu

Isivumelwano Esihlobene

Ingqungquthela Engokomfanekiso

Okungokomfanekiso	Isiyalezo
	Izimpawu ezisheshayo, ezibonisa izici ezibalulekile noma imisebenzi.
	Izimpawu zesaziso, ezingase zidale ukulimala komuntu siqu, ukulimala kwesistimu, noma ukuphazamiseka/ukulahlekelwa kwesignali.
	Izimpawu eziyisixwayiso, ezingase zidale ukulimala okukhulu kubantu.

Imiyalo yokuphepha

• Lo mkhiqizo kufanele usetshenziswe endaweni ehlangabezana nezidingo zokucaciswa kwedizayini, ngaphandle kwalokho ungabangela ukwehluleka, futhi ukungahambi kahle kokusebenza noma ukulimala kwengxenye okubangelwa ukungahambisani nemithetho efanele akukho kububanzi bokuqinisekisa ikhwalithi yomkhiqizo.
• Inkampani yethu ngeke ibe nesibopho esingokomthetho ngezingozi zokuphepha komuntu siqu kanye nokulahlekelwa kwempahla okubangelwa ukusebenza ngokungemthetho kwemikhiqizo.
• Sicela ungaguquli okokusebenza ngaphandle kwemvume, okungase kubangele ukungasebenzi kwemishini.
• Lapho ufaka imishini, kuyadingeka ukulungisa imishini ukuze ivimbele ukuwa.
• Uma okokusebenza kufakwe uthi, sicela ugcine ibanga okungenani elingu-20cm ukusuka empahleni ngesikhathi sokusetshenziswa.
• Ungasebenzisi izinto zokuhlanza eziwuketshezi, futhi ugweme uketshezi nezinto ezivuthayo.
• Lo mkhiqizo usekelwa kuphela ukusetshenziswa kwangaphakathi.

Faka i-OS

Lesi sahluko sethula indlela yokukhipha i-OS file kanye nekhadi le-flash le-SD.

• Landa i-OS File
• Flash SD Card

Landa i-OS File
Uma isistimu yokusebenza ilimele ngesikhathi sokusetshenziswa, udinga ukulanda kabusha inguqulo yakamuva yesithombe sohlelo bese uyikhanyisa.

Flash SD Card
I-ED-HMI3010-101C iqala isistimu ekhadini le-SD ngokuzenzakalelayo. Uma udinga ukukhanyisa isistimu yakamuva, udinga ukukhanyisa isithombe sohlelo ekhadini le-SD. Kunconywa ukusebenzisa ithuluzi elisemthethweni le-Raspberry Pi elikhanyayo, futhi indlela yokulanda imi kanje:
I-Raspberry Pi Imager : https://downloads.raspberrypi.org/imager/imager_latest.exe

Ukulungiselela:

• Ukulanda nokufakwa kwethuluzi elikhanyayo kukhompyutha sekuqediwe.
• Isifundi sekhadi sesilungisiwe.
• I-OS file ukubaneka isitholiwe.
• Ikesi ledivayisi livuliwe futhi ikhadi le-SD le-ED-HMI3010-101C selitholiwe. Ukuze uthole imisebenzi enemininingwane, sicela ubhekisele ku-2.1 Vula Ikesi Ledivayisi kokuthi 2.2 Khipha Ikhadi Le-SD futhi.

Izinyathelo:
Izinyathelo zichazwa kusetshenziswa uhlelo lweWindows njenge-example.

1. Faka ikhadi le-SD esifundweni sekhadi, bese ufaka isifundi sekhadi embobeni ye-USB yePC.
2. Vula i-Raspberry Pi Imager, khetha "KHETHA I-OS" bese ukhetha "Sebenzisa Ngokwezifiso" kufasitelana le-pop-up.
3. Ngokuya ngomyalo, khetha i-OS elandiwe file ngaphansi kwendlela echazwe umsebenzisi bese ubuyela kusixhumi esibonakalayo esikhulu.
4. Chofoza "KHETHA ISITOREJI", khetha ikhadi le-SD le-ED-HMI3010-101C kusixhumi esibonakalayo "Isitoreji", bese ubuyela kusixhumi esibonakalayo esiyinhloko.
5. Chofoza okuthi “BHALA” bese ukhetha okuthi “Yebo” kubhokisi le-pop-up ukuze uqale ukubhala i-OS.
6. Ngemuva kokuthi ukubhalwa kwe-OS kuqediwe, ifayela le- file izoqinisekiswa.
7. Ngemva kwe file ukuqinisekiswa kuqediwe, ibhokisi lomyalo elithi “Ukubhala Kuphumelele” liyavela, bese uchofoza okuthi “QHUBEKA” ukuze uqedele ikhadi le-SD elikhanyayo.
8. Vala i-Raspberry Pi Imager, susa isifundi sekhadi
9. Faka ikhadi le-SD ku-Raspberry Pi 5 bese uvala ikesi ledivayisi (ukuthola imisebenzi enemininingwane, sicela ubhekisele kokuthi 2.3 Faka Ikhadi Le-SD kanye 2.4 Vala Ikesi Ledivayisi), bese uvula futhi.

Vula futhi Vala Ikesi

Lesi sahluko sethula imisebenzi yokuvula/ukuvala ikesi ledivayisi nokufaka/ukukhipha ikhadi le-SD.

• Vula Ikesi Ledivayisi
• Khipha Ikhadi le-SD
• Faka Ikhadi le-SD
• Vala Ikesi Ledivayisi

Vula Ikesi Ledivayisi

Ukulungiselela:
I-screwdriver yesiphambano isilungisiwe.

Izinyathelo:
Sebenzisa i-screwdriver ukuze ukhulule izikulufi ezingu-4 M3 kukesi lensimbi le-ED-HMI3010-101C ngokuphambene newashi, futhi ukhiphe ikesi lensimbi, njengoba kukhonjisiwe esithombeni esingezansi.

Khipha Ikhadi le-SD

Ukulungiselela:

• Ikesi ledivayisi livuliwe.
• Ipheya lama-tweezers selilungile.

Izinyathelo:

1. Thola indawo yekhadi le-SD, njengoba kukhonjisiwe esithombeni esingezansi.
2. Sebenzisa ama-tweezers ukubamba ikhadi le-SD futhi ulikhiphe.

Faka Ikhadi le-SD

Ukulungiselela:

• Ikesi ledivayisi livuliwe.
• Ikhadi le-SD likhishiwe.

Izinyathelo:

1. Thola indawo yesikhala sekhadi le-SD, njengoba kukhonjisiwe ngezansi kwebhokisi elibomvu.
2. Faka ikhadi le-SD endaweni yekhadi elihambisanayo uhlangothi lokuxhumana lubheke phezulu, uqinisekise ukuthi ngeke liwe.

Vala Ikesi Ledivayisi

• Ukulungiselela:
  I-screwdriver yesiphambano isilungisiwe.
• Izinyathelo:
  Mboza ikesi, faka izikulufu ezingu-4 M3, bese uqinisa ngokwewashi ukuze uvikele ikesi.

ED-HMI3010-101C Umhlahlandlela Wokufaka Isicelo

Amadokhumenti / Izinsiza

	I-EDA ED-HMI3010-101C I-Raspberry Pi Technology Platform [pdf] Umhlahlandlela Womsebenzisi ED-HMI3010-101C Raspberry Pi Technology Platform, ED-HMI3010-101C, Raspberry Pi Technology Platform, Pi Technology Platform, Technology Platform
	I-EDA ED-HMI3010-101C I-Raspberry Pi Technology Platform [pdf] Umhlahlandlela Womsebenzisi ED-HMI3010-101C, ED-HMI3010-101C Raspberry Pi Technology Platform, ED-HMI3010-101C, Raspberry Pi Technology Platform, Pi Technology Platform, Technology Platform, Platform

Izithenjwa

• Imaniwali yosebenzisayo