EDA ED-HMI3010-101C Rasipi Pi Tekonolosi Platform

Fa'amatalaga:

• Fa'ata'ita'iga o oloa: ED-HMI3010-101C
• Tufuga: EDA Technology Co., LTD
• Fa'aoga: IOT, fa'atonuga fa'apisinisi, masini, malosi lanumeamata, atamai fa'apitoa
• Fa'avae Lagolago: Raspberry Pi
• Fa'amatalaga Fa'afeso'ota'i:
  • tuatusi: Potu 301, Fale 24, Nu.1661 Jialuo Highway, Jiading District, Shanghai
  • imeli: sales@edatec.cn
  • Telefoni: +86-18217351262
  • Webnofoaga: https://www.edatec.cn
  • Lagolago Fa'atekinisi:
    • imeli: support@edatec.cn
    • Telefoni: +86-18627838895
    • Wechat: zzw_1998-

Fa'atonuga o le Fa'aaogaina o Mea

Fa'apipi'i:
Ina ia faʻapipiʻi le ED-HMI3010-101C, mulimuli i laasaga nei:

1. Ia mautinoa o le siosiomaga e fetaui ma mamanu faʻatulagaina.
2. Fa'amau lelei mea faigaluega e puipuia ai le pa'u.

Amata ane:
Ina ia amata faʻaaoga le oloa:

1. Va'ai ile tusi fa'aoga mo fa'amatalaga auiliili amata.

Fa'atonuga:
Fa'atulaga le oloa e ala i le mulimuli i laasaga nei:

1. Va'ai ile ta'iala ole talosaga mo fa'amatalaga fa'atulagaina.

Tausiga

Ina ia tausia le oloa:

1. Aloese mai le fa'aaogaina o mea e fa'amama vai.
2. Taofi le oloa mai vai ma mea e mu.

FAQ:

• Q: O le a le mea e tatau ona ou faia pe a le amataina le oloa?
  A: Afai e le mafai ona amata le oloa, faʻamolemole siaki le puna eletise ma fesoʻotaʻiga muamua. Va'ai le tusi lesona mo le fa'afitauli.
• Q: E mafai ona ou suia meafaigaluega mo le faʻavasegaina?
  A: E le fautuaina le suia o mea faigaluega e aunoa ma se faʻatagaga ona e ono mafua ai le faaletonu o meafaigaluega ma faʻaumatia le tusi saisai.
• Q: E fa'afefea ona ou maua le lagolago fa'apitoa?
  A: Mo fesoasoani faʻapitoa, e mafai ona e faʻafesoʻotaʻi mai i matou ile imeli ile support@edatec.cn pe valaau + 86-18627838895.

ED-HMI3010-101C
Ta'iala mo Talosaga
EDA Technology Co., LTD Tesema 2023

Faafesootai matou

• Faafetai tele mo le faʻatau ma le faʻaogaina o a matou oloa, ma o le a matou tautuaina oe ma le loto atoa.
• I le avea ai ma se tasi o paaga mamanu a le lalolagi atoa o Raspberry Pi, matou te tuuto atu i le tuʻuina atu o meafaigaluega mo le IOT, faʻatautaia o fale gaosi oloa, masini, malosi lanumeamata ma le atamai faʻavae e faʻavae i luga o le tekonolosi Pipipipi.
• E mafai ona e fa'afeso'ota'i i matou i auala nei:
  • EDA Technology Co.,LTD
  • tuatusi: Potu 301, Fale 24, Nu.1661 Jialuo Highway, Jiading District, Shanghai
  • Meli: sales@edatec.cn
  • Telefoni: +86-18217351262
  • Webnofoaga: https://www.edatec.cn
• Lagolago Fa'atekinisi:
  • Meli: support@edatec.cn
  • Telefoni: +86-18627838895
  • Wechat: zzw_1998-

Fa'amatalaga o Puletaofia

• ED-HMI3010-101C ma ana aia tatau tau meatotino tau le atamai e umia e le EDA Technology Co.,LTD.
• EDA Technology Co.,LTD e ona le puletaofia o lenei pepa ma fa'asao uma aia tatau. A aunoa ma le fa'atagaga tusitusia a le EDA Technology Co.,LTD, e leai se vaega o lenei pepa e mafai ona suia, tufatufaina pe kopiina i so'o se auala po'o se fomu.

Fa'ailoga

E le fa'amaonia e le EDA Technology Co.,LTD o fa'amatalaga o lo'o i totonu o lenei tusi lesona e fa'aonaponei, sa'o, atoatoa pe maualuga. EDA Technology Co.,LTD e le faʻamaonia foi le faʻaogaina atili o lenei faʻamatalaga. Afai o meafaitino poʻo mea e leiloa e mafua mai i le faʻaaogaina poʻo le le faʻaaogaina o faʻamatalaga o loʻo i totonu o lenei tusi lesona, poʻo le faʻaaogaina o faʻamatalaga sese pe le atoatoa, pe afai e le o faʻamaonia o le faʻamoemoe poʻo le faatamala o le EDA Technology Co., LTD, e mafai ona tuusaunoaina le tagi o noataga mo EDA Technology Co.,LTD. EDA Technology Co.,LTD o lo'o fa'asaoina manino le aia tatau e sui pe fa'aopoopo i totonu po'o se vaega o lenei tusi lesona e aunoa ma se fa'aaliga fa'apitoa.

Upu Tomua

Tusi Taiala Faatatau
O ituaiga uma o pepa o oloa o loʻo i totonu o le oloa o loʻo faʻaalia i le laulau o loʻo i lalo, ma e mafai e tagata faʻaoga ona filifili i ai view o pepa fa'atatau e tusa ai ma o latou mana'oga.

Pepa	Faatonuga
ED-HMI3010-101C Pepa Fa'amatalaga	O lenei pepa o loʻo faʻaalia ai foliga o oloa, polokalama faʻapipiʻi ma meafaigaluega faʻapitoa, fua ma tulafono faʻatonu a le ED-HMI3010-101C e fesoasoani ai i tagata faʻaoga ia malamalama i le aofaʻi o taʻiala o oloa.
ED-HMI3010-101C Tusi Taiala	O lenei pepa o loʻo faʻaalia ai foliga vaaia, faʻapipiʻiina, amataina ma le faʻatulagaina o le ED-HMI3010-101C e fesoasoani ai i tagata faʻaoga e faʻaoga lelei le oloa.
ED-HMI3010-101C Ta'iala Talosaga	O lenei pepa o loʻo faʻaalia ai le OS download, SD moli ma tatala / tapunia masini masini ED-HMI3010-101C e fesoasoani i tagata faʻaoga faʻaoga lelei le oloa.

E mafai e tagata fa'aoga ona asiasi i mea nei webnofoaga mo nisi fa'amatalaga: https://www.edatec.cn

Aufaitau Faitau

O lenei tusi lesona e fa'atatau i le au faitau nei:

• Inisinia Fa'ainisinia
• Inisinia faaeletise
• Inisinia Polokalama
• Inisinia Faiga

Maliega Fesootai

Feagaiga Faatusa

Fa'atusa	Faatonuga
	Fa'ailoga vave, e fa'aalia ai vaega taua po'o gaioiga.
	Fa'aaliga fa'ailoga, e ono mafua ai manu'a a le tagata lava ia, fa'aleagaina o le tino, po'o fa'ailo fa'alavelave/ gau.
	Faailoga lapatai, e ono afaina tele ai tagata.

Faatonuga Saogalemu

• O lenei oloa e tatau ona faʻaaogaina i totonu o se siosiomaga e fetaui ma manaʻoga o faʻataʻitaʻiga mamanu, a le o lea e ono mafua ai le toilalo, ma le faʻaleagaina o galuega poʻo le faʻaleagaina o vaega e mafua mai i le le tausisia o tulafono faatonutonu talafeagai e le oi totonu o le faʻamautinoaga lelei o oloa.
• O le a le tauaveina e le matou kamupani soʻo se tiute faʻaletulafono mo faʻalavelave faʻafuaseʻi o le saogalemu o le tagata lava ia ma mea na leiloa e mafua mai i le faʻaaogaina faasolitulafono o oloa.
• Fa'amolemole 'aua ne'i suia mea faigaluega e aunoa ma se fa'atagaga, e ono fa'aletonu ai masini.
• A faʻapipiʻi meafaigaluega, e manaʻomia le faʻaleleia o meafaigaluega e puipuia ai mai le pa'ū.
• Afai o meafaigaluega e faʻapipiʻiina i se antenna, faʻamolemole tuʻu se mamao e le itiiti ifo i le 20cm mai meafaigaluega aʻo faʻaaogaina.
• Aua ne'i fa'aogaina mea fa'amama vai, ma 'alo'ese mai vai ma mea e mu.
• O lenei oloa e na'o le lagolagoina mo le fa'aoga i totonu.

Fa'apipi'i le OS

O lenei mataupu o loʻo faʻaalia ai le auala e sii mai ai le OS file ma flash SD card.

• La'u OS File
• Flash SD Card

La'u OS File
Afai e faʻaleagaina le faʻaogaina o le polokalama i le taimi o le faʻaogaina, e tatau ona e toe sii mai le ata lata mai o le ata faʻapipiʻi ma moli.

Flash SD Card
ED-HMI3010-101C amata le faiga mai le SD card i le faaletonu. Afai e te manaʻomia le moliina o le faiga fou, e tatau ona e moli le ata o le polokalama i le SD card. E fautuaina e faʻaaoga le meafaigaluega faʻapipiʻi Raspberry Pi, ma o le ala o le download e faʻapea:
Rasipi Pi Imager : https://downloads.raspberrypi.org/imager/imager_latest.exe

Sauniuniga:

• Ua maeʻa le download ma le faʻapipiʻiina o le meafaigaluega moli i le komepiuta.
• Ua saunia se kata faitau.
• O le OS file e emo ua maua.
• Ua tatalaina le pusa masini ma ua maua le SD card o ED-HMI3010-101C. Mo fa'amatalaga auiliili, fa'amolemole fa'afeso'ota'i le 2.1 Open Device Case i le 2.2 Pull Out SD Card ma.

Laasaga:
O laasaga o loʻo faʻamatalaina i le faʻaogaina o le Windows system e pei o se example.

1. Fa'aofi le SD card i le card reader, ona fa'aofi lea o le card reader i le USB port o le PC.
2. Tatala Raspberry Pi Imager, filifili "FILIFILI OS" ma filifili "Faʻaaoga Faʻasinomaga" i le pop-up pane.
3. E tusa ai ma le musumusuga, filifili le OS na sii mai file i lalo o le ala faʻaogaina e le tagata faʻaoga ma toe foʻi i le faʻaoga autu.
4. Kiliki le "FILIFILI FAʻATAU", filifili le SD card o ED-HMI3010-101C i le "Teuga" faʻaoga, ma toe foʻi i le faʻaoga autu.
5. Kiliki "TUSI" ma filifili "Ioe" i le pusa faʻapipiʻi faʻapipiʻi e amata tusia le OS.
6. A maeʻa le OS tusitusi, o le file o le a fa'amaonia.
7. Ina ua uma le file ua maeʻa le faʻamaoniga, o le pusa vave " Tusia Faʻamanuiaga" e oso i luga, ma kiliki "FAʻAUAU" e faʻamaeʻa ai le SD card.
8. Tapuni Raspberry Pi Imager, aveese le kata faitau
9. Fa'aofi le SD card i totonu o le Raspberry Pi 5 ma tapuni le pusa masini (mo fa'amatalaga auiliili, fa'amolemole va'ai ile 2.3 Fa'aofi le SD Card ma le 2.4 Close Device Case), ona toe fa'aola lea.

Tatala ma Tapuni Pusa

O lenei mataupu o loʻo faʻaalia ai gaioiga mo le tatalaina / tapunia o le masini masini ma faʻapipiʻi / aveese le SD card.

• Tatala Mea Fa'atonu
• Toso i fafo SD Card
• Fa'aofi le SD Card
• Tapuni le meafaitino

Tatala Mea Fa'atonu

Sauniuniga:
Ua saunia se sikuli kolosi.

Laasaga:
Fa'aaoga se sikuli fa'alilolilo e tatala ai le 4 M3 sikulima i luga o le pusa u'amea ED-HMI3010-101C fa'afeagai i le itu, ma aveese le pusa u'amea, e pei ona fa'aalia i le ata i lalo.

Toso i fafo SD Card

Sauniuniga:

• Ua tatala le pusa masini.
• Ua sauni se pea tweezers.

Laasaga:

1. Su'e le nofoaga o le SD card, e pei ona fa'aalia i le ata i lalo.
2. Fa'aoga tweezers e uu ai le SD card ma toso i fafo.

Fa'aofi le SD Card

Sauniuniga:

• Ua tatala le pusa masini.
• SD card ua toso i fafo.

Laasaga:

1. Su'e le nofoaga o le SD card slot, e pei ona faaalia i lalo o le pusa mumu.
2. Fa'aofi le SD card i totonu o le avanoa card fetaui ma le itu fa'afeso'ota'i fa'asaga i luga, ia mautinoa e le pa'u i fafo.

Tapuni le meafaitino

• Sauniuniga:
  Ua saunia se sikuli kolosi.
• Laasaga:
  Ufiufi le atigipusa, fa'aofi 4 M3 sikulima, ma fa'amau fa'asagatonu i le uati e fa'amau ai le pusa.

ED-HMI3010-101C Ta'iala Talosaga

Pepa / Punaoa

	EDA ED-HMI3010-101C Rasipi Pi Tekonolosi Platform [pdf] Taiala mo Tagata Fa'aoga ED-HMI3010-101C Rasipi Pi Fa'atekonolosi Fa'atekonolosi, ED-HMI3010-101C, Rasipi Pi Fa'atekonolosi Fa'atekonolosi, Pi Technology Platform, Fa'atekonolosi Fa'atekonolosi
	EDA ED-HMI3010-101C Rasipi Pi Tekonolosi Platform [pdf] Taiala mo Tagata Fa'aoga ED-HMI3010-101C, ED-HMI3010-101C Rasipi Pi Fa'atekonolosi Fa'atekonolosi, ED-HMI3010-101C, Rasipi Pi Fa'atekonolosi Fa'atekonolosi, Pi Tekinolosi Fa'atekonolosi, Fa'atekonolosi Fa'atekonolosi

Fa'asinomaga

• Tusi Taiala