EDA ED-HMI3010-101C Raspberry Pi Technology Platform Guide

Sethala se tšehelitsoeng: Raspberry Pi
Mokhoa oa puisano:
- Aterese: Room 301, Building 24, No.1661 Jialuo Highway, Jiading District, Shanghai
- Lengolo-tsoibila: sales@edatec.cn
- Mohala: +86-18217351262
- Websebaka: https://www.edatec.cn
- Tšehetso ea tekheniki:
  - Lengolo-tsoibila: support@edatec.cn
  - Mohala: +86-18627838895
  - Wechat: zzw_1998-

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya:
Ho kenya ED-HMI3010-101C, latela mehato ena:

Netefatsa hore tikoloho e kopana le litlhaloso tsa moralo.

Lokisa lisebelisoa ka mokhoa o sireletsehileng ho thibela ho oa.

E qalang:
Ho qala ho sebelisa sehlahisoa:

Sheba buka ea mosebelisi bakeng sa litaelo tse qaqileng tsa ho qala.

Tlhophiso:
Lokisa sehlahisoa ka ho latela mehato ena:

Sheba tataiso ea tšebeliso bakeng sa lintlha tsa tlhophiso.

Tlhokomelo

Ho boloka sehlahisoa:

Qoba ho sebelisa thepa ea ho hloekisa metsi.
Boloka sehlahisoa hole le maro le lintho tse ka tukang.

LBH:

P: Ke lokela ho etsa eng haeba sehlahisoa se hloleha ho qala?
A: Haeba sehlahisoa se hloleha ho qala, ka kopo sheba mohloli oa matla le likhokahano pele. Sheba buka ea mosebelisi bakeng sa mehato ea ho rarolla mathata.

P: A na nka fetola lisebelisoa bakeng sa ho itlhophisa?
A: Ha ho kgothaletswe ho fetola thepa ntle le tumello kaha ho ka lebisa ho hloleheng ha thepa le ho hlakola waranti.
P: Nka fumana tšehetso ea tekheniki joang?
A: Bakeng sa tšehetso ea tekheniki, o ka ikopanya le rona ka lengolo-tsoibila ho support@edatec.cn kapa letsetsa +86-18627838895.

ED-HMI3010-101C
Tataiso ea Kopo
EDA Technology Co., LTD Ka December 2023

Iteanye le rona

Ke leboha haholo ka ho reka le ho sebelisa lihlahisoa tsa rona, 'me re tla u sebeletsa ka pelo eohle.

Joaloka e mong oa balekane ba moralo oa lefats'e oa Raspberry Pi, re ikemiselitse ho fana ka litharollo tsa hardware bakeng sa IOT, taolo ea indasteri, automation, matla a matala le bohlale ba maiketsetso bo thehiloeng sethaleng sa theknoloji sa Raspberry Pi.
U ka ikopanya le rona ka litsela tse latelang:
- EDA Technology Co.,LTD
- Aterese: Room 301, Building 24, No.1661 Jialuo Highway, Jiading District, Shanghai
- Lengolo: sales@edatec.cn
- Mohala: +86-18217351262
- Websebaka: https://www.edatec.cn
Tšehetso ea tekheniki:
- Lengolo: support@edatec.cn
- Mohala: +86-18627838895
- Wechat: zzw_1998-

Tlaleho ea Copyright

ED-HMI3010-101C le litokelo tsa eona tse amanang le thepa ea bohlale ke tsa EDA Technology Co.,LTD.
EDA Technology Co.,LTD ke eona e nang le tokelo ea molao ea tokomane ena 'me e na le litokelo tsohle. Ntle le tumello e ngotsoeng ea EDA Technology Co.,LTD, ha ho karolo ea tokomane ena e ka fetoloang, ea ajoa kapa ea kopitsoa ka tsela efe kapa efe.

Boithorollo

EDA Technology Co.,LTD ha e tiise hore lintlha tse bukeng ena li nakong, li nepahetse, li feletse kapa ke tsa boleng bo holimo. EDA Technology Co.,LTD le eona ha e fane ka tiiso ea tšebeliso e tsoelang pele ea tlhahisoleseling ena. Haeba tahlehelo e amanang le thepa kapa e seng ea thepa e bakoa ke ho sebelisa kapa ho se sebelise lintlha tse bukeng ena, kapa ka ho sebelisa tlhahisoleseding e fosahetseng kapa e sa phethahalang, ha feela ho sa pakoe hore ke sepheo kapa bohlasoa ba EDA Technology Co., LTD, kopo ea mokoloto ea EDA Technology Co.,LTD e ka lokolloa. EDA Technology Co.,LTD e na le tokelo e hlakileng ea ho fetola kapa ho tlatsetsa likahare kapa karolo ea bukana ena ntle le tsebiso e khethehileng.

Ketapele

Libukana Tse Amanang
Mefuta eohle ea litokomane tsa sehlahisoa tse fumanehang ka har'a sehlahisoa li bonts'oa tafoleng e latelang, 'me basebelisi ba ka khetha ho view litokomane tse tsamaellanang ho ea ka litlhoko tsa bona.

Litokomane	Taelo
Lethathamo la lintlha tsa ED-HMI3010-101C	Tokomane ena e hlahisa likarolo tsa sehlahisoa, lisebelisoa tsa software le lisebelisoa, boholo le likhoutu tsa ho odara tsa ED-HMI3010-101C ho thusa basebelisi ho utloisisa likarolo tsohle tsa sistimi ea lihlahisoa.
Buka ea ED-HMI3010-101C	Tokomane ena e hlahisa ponahalo, ho kenya, ho qala le ho hlophisoa ha ED-HMI3010-101C ho thusa basebelisi ho sebelisa sehlahisoa hamolemo.
ED-HMI3010-101C Tataiso ea Likopo	Tokomane ena e hlahisa mokhoa oa ho jarolla OS, SD flashing le ho bula / ho koala sesebelisoa sa ED-HMI3010-101C ho thusa basebelisi ho sebelisa sehlahisoa hamolemo.

Basebedisi ba ka etela tse latelang websaete bakeng sa lintlha tse ling: https://www.edatec.cn

Sebaka sa Babali

Bukana ena e sebetsa ho babali ba latelang:

Moenjiniere oa Mechini
Moenjiniere oa Motlakase
Moenjiniere oa Software

Moenjiniere oa Sisteme

Tumellano e Amanang

Kopano ea tšoantšetso

Ea tšoantšetso	Taelo
	Matšoao a potlakileng, a bontšang likarolo tsa bohlokoa kapa ts'ebetso.
	Lemoha matšoao, a ka bakang kotsi ea motho, tšenyo ea sistimi, kapa tšitiso/tahlehelo.
	Matshwao a lemosang, a ka bakang kotsi e kgolo ho batho.

Litaelo tsa Tšireletseho

Sehlahisoa sena se lokela ho sebelisoa tikolohong e fihlelang litlhoko tsa lintlha tsa moralo, ho seng joalo se ka baka ho hloleha, 'me ho se tloaelehe ha tšebetso kapa tšenyo ea karolo e bakoang ke ho se ikamahanye le melaoana e amehang ha e ka har'a sekhahla sa netefatso ea boleng ba sehlahisoa.
Khamphani ea rona e ke ke ea jara boikarabello bofe kapa bofe ba molao bakeng sa likotsi tsa polokeho ea motho le tahlehelo ea thepa e bakoang ke ts'ebetso e seng molaong ea lihlahisoa.
Ka kopo u se ke ua fetola thepa ntle le tumello, e ka bakang ho hlōleha ha thepa.

Ha u kenya lisebelisoa, ho hlokahala ho lokisa lisebelisoa ho thibela ho oa.
Haeba sesebelisoa se na le antenna, ka kopo boloka sebaka sa bonyane 20cm ho tloha sesebelisoa nakong ea ts'ebeliso.
Se ke oa sebelisa lisebelisoa tsa ho hloekisa metsi, 'me u ipolokele hole le maro le lintho tse tukang.

Sehlahisoa sena se tšehetsoa feela bakeng sa tšebeliso ea ka tlung.

Kenya OS

Khaolong ena e hlahisa mokhoa oa ho khoasolla OS file le karete ea flash ea SD.

Khoasolla OS File

Karete ea SD ea Flash

Khoasolla OS File
Haeba sistimi ea ts'ebetso e senyehile nakong ea ts'ebeliso, o hloka ho khoasolla mofuta oa morao-rao oa setšoantšo sa sistimi ebe o e khantša.

Karete ea SD ea Flash
ED-HMI3010-101C e qala sistimi ho tsoa ho karete ea SD ka ho sa feleng. Haeba o hloka ho bonesa sistimi ea morao-rao, o hloka ho khantša setšoantšo sa sistimi ho karete ea SD. Ho khothalletsoa ho sebelisa sesebelisoa sa semmuso sa Raspberry Pi, mme tsela ea ho jarolla e tjena:
Raspberry Pi Imager : https://downloads.raspberrypi.org/imager/imager_latest.exe

Boitokisetso:

Ho phetheloa le ho kenya sesebelisoa sa ho benya komporong.
Sebali sa karete se lokiselitsoe.

OS file ho kganya ho fumanwe.
Nyeoe ea sesebelisoa e buletsoe 'me karete ea SD ea ED-HMI3010-101C e fumanoe. Bakeng sa lits'ebetso tse felletseng, ka kopo sheba 2.1 Open Device Case ho 2.2 Pull Out SD Card le.

Mehato:
Mehato e hlalosoa ho sebelisoa sistimi ea Windows joalo ka example.

Kenya karete ea SD ho sebali sa karete, ebe u kenya sebali sa karete boema-kepeng ba USB ba PC.
Bula Raspberry Pi Imager, khetha "KHETHA OS" 'me u khethe "Sebelisa Tloaelo" ho fenstere ea pop-up.
Ho latela molaetsa, khetha OS e jarollotsoeng file tlas'a tsela e hlalositsoeng ke mosebedisi 'me u khutlele ho sebopeho se seholo.

Tobetsa "KHETHA STORAGE", khetha karete ea SD ea ED-HMI3010-101C ka sebopeho sa "Storage", 'me u khutlele ho sebopeho se seholo.
Tobetsa "NGOLA" 'me u khethe "E" ka lebokoseng le potlakileng la pop-up ho qala ho ngola OS.
Ka mor'a hore mokhoa oa ho ngola oa OS o phethoe, faele ea file e tla netefatsoa.

Ka mor'a moo file netefatso e phethiloe, lebokose le reng "Ngola e atlehile" le tla hlaha, ebe o tobetsa "TSOELA PELE" ho qeta ho benya karete ea SD.
Koala Raspberry Pi Imager, tlosa 'mali oa karete
Kenya karete ea SD ka har'a Raspberry Pi 5 'me u koale mokotla oa sesebelisoa (bakeng sa lits'ebetso tse qaqileng, ka kopo sheba 2.3 Insert SD Card le 2.4 Close Device Case), ebe o bula hape.

Bula le ho Koala Taba

Khaolo ena e kenyelletsa ts'ebetso ea ho bula / ho koala mokotla oa sesebelisoa le ho kenya / ho tlosa karete ea SD.

Bula Sesebediswa Case
Tlosa Karete ea SD

Kenya karete ea SD
Kwala Sesebediswa Case

Bula Sesebediswa Case

Tokisetso:
Ho lokisitsoe screwdriver ea sefapano.

Mehato:
Sebelisa screwdriver ho lokolla 4 M3 screws holim'a ED-HMI3010-101C tšepe kesi counterclockwise, 'me u tlose khese ea tšepe, joalokaha ho bontšitsoe setšoantšong se ka tlase.

Tlosa Karete ea SD

Tokisetso:

Mokotla oa sesebelisoa o butsoe.
Li-tweezers li se li lokile.

Mehato:

Fumana sebaka sa karete ea SD, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
Sebelisa li-tweezers ho tšoara karete ea SD ebe u e ntša.

Kenya karete ea SD

Boitokisetso:

Mokotla oa sesebelisoa o butsoe.

Karete ea SD e ntšitsoe.

Mehato:

Fumana sebaka sa karete ea karete ea SD, joalo ka ha ho bonts'itsoe ka tlase ho lebokose le khubelu.

Kenya karete ea SD ka har'a sekotjana sa karete se tsamaisanang le lehlakore le hokahaneng le shebile holimo, ho etsa bonnete ba hore e ke ke ea oa.

Kwala Sesebediswa Case

Tokisetso:
Ho lokisitsoe screwdriver ea sefapano.

Mehato:
Koahela mokotla, kenya li-screws tse 4 M3, 'me u hatelle ka ho le letona ho tiisa mokotla.

ED-HMI3010-101C Tataiso ea Likopo

Litokomane / Lisebelisoa

	EDA ED-HMI3010-101C Raspberry Pi Technology Platform [pdf] Bukana ea Mosebelisi ED-HMI3010-101C Raspberry Pi Technology Platform, ED-HMI3010-101C, Raspberry Pi Technology Platform, Pi Technology Platform, Technology Platform
	EDA ED-HMI3010-101C Raspberry Pi Technology Platform [pdf] Bukana ea Mosebelisi ED-HMI3010-101C, ED-HMI3010-101C Raspberry Pi Technology Platform, ED-HMI3010-101C, Raspberry Pi Technology Platform, Pi Technology Platform, Technology Platform, Platform