I-UNO R3 SMD Micro Controller
Imanuwali Yereferensi Yomkhiqizo
I-SKU: A000066
Incwadi Yeziqondiso
Incazelo
I-Arduino UNO R3 iyibhodi elihle kakhulu lokujwayelana ne-electronics kanye nekhodi. Lesi silawuli esincane esisebenza ngezindlela eziningi sifakwe i-ATmega328P eyaziwa kakhulu kanye ne-ATMega 16U2 Processor.
Leli bhodi lizokunikeza ulwazi oluhle lokuqala emhlabeni we-Arduino.
Izindawo eziqondiwe:
Umenzi, isingeniso, izimboni
Izici
Iphrosesa ye-ATMega328P
- Inkumbulo
• I-AVR CPU ingafika kokungu-16 MHz
• 32KB Flash
• 2KB SRAM
• 1KB EEPROM - Ezokuphepha
• Ukusetha kabusha amandla (POR)
• I-Brown Out Detection (BOD) - Amapheripheral
• 2x 8-bit Timer/Counter enerejista yesikhathi ezinikele futhi uqhathanise amashaneli
• I-1x 16-bit Timer/Counter enerejista yesikhathi ezinikele, ukuthwebula okokufaka nokuqhathanisa amashaneli
• 1x USART ene-fractional baud generator kanye nokutholwa kokuqala kohlaka
• 1x isilawuli/peripheral Serial Peripheral Interface (SPI)
• 1x Isilawuli semodi ekabili/i-peripheral I2C
• I-1x Analog Comparator (AC) enokufakwa kwereferensi okukalayo
• I-Watchdog Timer ene-on-chip oscillator ehlukile
• Amashaneli e-PWM ayisithupha
• Ukuphazamisa nokuvuka ekushintsheni kwephinikhodi - Iphrosesa ye-ATMega16U2
• 8-bit AVR® RISC-based microcontroller - Inkumbulo
• 16 KB ISP Flash
• 512B EEPROM
• 512B SRAM
• isixhumi esibonakalayo se-debugWIRE sokulungisa iphutha ku-chip nokuhlela - Amandla
• 2.7-5.5 volts
Ibhodi
1.1 Isicelo ExampLes
Ibhodi le-UNO liwumkhiqizo wefulegi we-Arduino. Noma ngabe umusha emhlabeni wezinto zikagesi noma uzosebenzisa i-UNO njengethuluzi lezinjongo zemfundo noma imisebenzi ehlobene nomkhakha.
Ukungena kokuqala ku-electronics: Uma lena kuyiphrojekthi yakho yokuqala ngaphakathi kwekhodi ne-electronics, qalisa ngebhodi lethu elisetshenziswa kakhulu nelirekhodiwe; I-Arduino UNO. Ifakwe iphrosesa eyaziwa kakhulu ye-ATmega328P, izikhonkwane zedijithali eziyi-14 zokufaka/zokukhiphayo, okokufaka kwe-analog okungu-6, ukuxhumana kwe-USB, unhlokweni we-ICSP nenkinobho yokusetha kabusha. Leli bhodi lihlanganisa konke ozokudinga ukuze uthole ulwazi oluhle lokuqala nge-Arduino.
Ibhodi lokuthuthukisa izinga lemboni: Ngokusebenzisa ibhodi le-Arduino UNO ezimbonini, kunezinkampani eziningi ezisebenzisa ibhodi le-UNO njengobuchopho be-PLC's yazo.
Izinjongo zemfundo: Nakuba ibhodi le-UNO selihlale nathi cishe iminyaka eyishumi, lisasetshenziswa kabanzi ngezinjongo ezehlukene zemfundo kanye namaphrojekthi esayensi. Izinga eliphezulu nokusebenza kwekhwalithi ephezulu kwebhodi kukwenza kube insiza enhle yokuthwebula isikhathi sangempela kuzinzwa kanye nokucupha imishini yaselabhorethri eyinkimbinkimbi ukusho ama-ex ambalwa.ampLes.
1.2 Imikhiqizo Ehlobene
- Ikhithi Yokuqala
- I-Tinkerkit Braccio Robot
- Example
Izilinganiso
2.1 Izimo Zokusebenza Ezinconyiwe
| Uphawu | Incazelo | Okuncane | Ubukhulu |
| Imikhawulo yokushisa elondolozayo yalo lonke ibhodi: | -40 °C (-40°F) | 85 °C ( 185°F) |
QAPHELA: Emazingeni okushisa aphezulu, EEPROM, voltagi-e regulator, kanye ne-crystal oscillator, ingase ingasebenzi njengoba kulindelekile ngenxa yezimo zokushisa ezeqisayo
2.2 Ukusetshenziswa kwamandla
| Uphawu | Incazelo | Okuncane | Thayipha | Ubukhulu | Iyunithi |
| I-VINMax | Umthamo wokufaka omkhulutage kusuka ku-VIN pad | 6 | – | 20 | V |
| I-VUSBMax | Umthamo wokufaka omkhulutage kusuka kusixhumi se-USB | – | – | 5.5 | V |
| I-PMax | Ukusetshenziswa kwamandla okuphezulu | – | xx | mA |
Isebenza Ngaphezuluview
3.1 I-Topology yebhodi
Phezulu view
| Ref. | Incazelo | Ref. | Incazelo |
| X1 | Ijekhi yamandla 2.1×5.5mm | U1 | I-SPX1117M3-L-5 Regulator |
| X2 | Isixhumi se-USB B | U3 | Idatha ye-ATMEGA16U2 |
| I-PC1 | EEE-1EA470WP 25V SMD Capacitor | U5 | I-LMV358LIST-A.9 IC |
| I-PC2 | EEE-1EA470WP 25V SMD Capacitor | F1 | Chip Capacitor, High Density |
| D1 | I-CGRA4007-G Rectifier | I-ICSP | Phina isixhumi sikanhlokweni (ngembobo engu-6) |
| J-ZU4 | Idatha ye-ATMEGA328P | I-ICSP1 | Phina isixhumi sikanhlokweni (ngembobo engu-6) |
| Y1 | I-ECS-160-20-4X-DU Oscillator |
3.2 Iphrosesa
I-Main processor iyi-ATmega328P egijima phezulu kwe-tp 20 MHz. Iningi lezikhonkwane zalo lixhunywe kumaheda angaphandle, nokho amanye abekelwe ukuxhumana kwangaphakathi ne-coprocessor ye-USB Bridge.
3.3 Isihlahla Samandla
Isihlahla samandla
Inganekwane:
| Isakhi |  Amandla I / O |
 Uhlobo Lokuguqulwa |
 UMax Wamanje |
 Voltage Ibanga |
Ukusebenza kwebhodi
4.1 Ukuqalisa – IDE
Uma ufuna ukuhlela i-Arduino UNO yakho ngenkathi ungaxhunyiwe ku-inthanethi udinga ukufaka i-Arduino Desktop IDE [1] Ukuze uxhume i-Arduino UNO kukhompyutha yakho, uzodinga ikhebula le-USB le-Micro-B. Lokhu futhi kunikeza amandla ebhodini, njengoba kuboniswe yi-LED.
4.2 Ukuqalisa – i-Arduino Web Mhleli
Wonke amabhodi e-Arduino, okuhlanganisa naleli, asebenza ngaphandle kwebhokisi ku-Arduino Web Umhleli [2], ngokufaka nje i-plugin elula.
I-Arduino Web Umhleli usingathwa ku-inthanethi, ngakho-ke uzohlala usesikhathini samanje ngezici zakamuva nokusekelwa kwawo wonke amabhodi. Landela i-[3] ukuze uqale ukubhala amakhodi esipheqululini futhi ulayishe imidwebo yakho ebhodini lakho.
4.3 Ukuqalisa - I-Arduino IoT Cloud
Yonke imikhiqizo enikwe amandla ye-Arduino IoT isekelwa ku-Arduino IoT Cloud ekuvumela ukuthi Ungene, udwebe futhi uhlaziye idatha yezinzwa, ucuphe imicimbi, futhi wenze ikhaya lakho noma ibhizinisi lakho libe ngokuzenzakalela.
4.4 Sample Sketches
Sampimidwebo ye-Arduino XXX ingatholakala ku-“Examples” kumenyu ye-Arduino IDE noma esigabeni esithi “Documentation” se-Arduino Pro webindawo [4]
4.5 Izinsiza eziku-inthanethi
Manje njengoba usudlule ezintweni eziyisisekelo zalokho ongakwenza ngebhodi ungakwazi ukuhlola amathuba angapheli eliwahlinzekayo ngokubheka amaphrojekthi ajabulisayo ku-Project Hub [5], i-Arduino Library Reference [6] kanye nesitolo se-inthanethi [7] lapho uzokwazi ukugcwalisa ibhodi lakho ngezinzwa, ama-actuator nokuningi
4.6 Ukubuyiselwa Kwebhodi
Wonke amabhodi e-Arduino ane-bootloader eyakhelwe ngaphakathi evumela ukukhanyisa ibhodi nge-USB. Uma kwenzeka umdwebo uvala iphrosesa futhi ibhodi alisatholakali nge-USB ungakwazi ukufaka imodi ye-bootloader ngokuthepha kabili inkinobho yokusetha kabusha ngemva nje kokukhanyisa.
Ama-Pinout wokuxhuma
5.1 IJANALOGU
| Phina | Umsebenzi | Uhlobo | Incazelo |
| 1 | NC | NC | Ayixhunyiwe |
| 2 | IOREF | IOREF | Ireferensi ye-digital logic V – exhunywe ku-5V |
| 3 | Setha kabusha | Setha kabusha | Setha kabusha |
| 4 | +3V3 | Amandla | +3V3 Isitimela Samandla |
| 5 | +5V | Amandla | I-+5V Power Rail |
| 6 | GND | Amandla | Ground |
| 7 | GND | Amandla | Ground |
| 8 | I-VIN | Amandla | Voltage Ukufaka |
| 9 | AO | I-Analog/GPIO | Okokufaka kwe-analog 0/GPIO |
| 10 | Al | I-Analog/GPIO | Okokufaka kwe-analog 1/GPIO |
| 11 | A2 | I-Analog/GPIO | Okokufaka kwe-analog 2/GPIO |
| 12 | A3 | I-Analog/GPIO | Okokufaka kwe-analog 3/GPIO |
| 13 | I-A4/SDA | Okokufaka kwe-analogi/12C | Okokufaka kwe-Analog 4/12C Umugqa wedatha |
| 14 | I-A5/SCL | Okokufaka kwe-analogi/12C | Okokufaka kwe-analog 5/12C Ulayini wewashi |
5.2 I-JDIGITAL
| Phina | Umsebenzi | Uhlobo | Incazelo |
| 1 | DO | Idijithali/GPIO | Iphinikhodi yedijithali 0/GPIO |
| 2 | D1 | Idijithali/GPIO | Iphinikhodi yedijithali 1/GPIO |
| 3 | D2 | Idijithali/GPIO | Iphinikhodi yedijithali 2/GPIO |
| 4 | D3 | Idijithali/GPIO | Iphinikhodi yedijithali 3/GPIO |
| 5 | D4 | Idijithali/GPIO | Iphinikhodi yedijithali 4/GPIO |
| 6 | DS | Idijithali/GPIO | Iphinikhodi yedijithali 5/GPIO |
| 7 | D6 | Idijithali/GPIO | Iphinikhodi yedijithali 6/GPIO |
| 8 | D7 | Idijithali/GPIO | Iphinikhodi yedijithali 7/GPIO |
| 9 | D8 | Idijithali/GPIO | Iphinikhodi yedijithali 8/GPIO |
| 10 | D9 | Idijithali/GPIO | Iphinikhodi yedijithali 9/GPIO |
| 11 | SS | Idijithali | SPI Chip Khetha |
| 12 | UMOSI | Idijithali | I-SPI1 Main Out yesibili |
| 13 | I-MISO | Idijithali | I-SPI Eyinhloko Kwesibili Ngaphandle |
| 14 | SCK | Idijithali | Okukhiphayo kwewashi le-serial le-SPI |
| 15 | GND | Amandla | Ground |
| 16 | I-AREF | Idijithali | I-analogue reference voltage |
| 17 | I-A4/SD4 | Idijithali | Okokufaka kwe-Analog 4/12C Ulayini wedatha (okuphindwe kabili) |
| 18 | I-A5/SDS | Idijithali | Okokufaka kwe-Analog 5/12C Ulayini wewashi (okuphindwe kabili) |
5.3 Ulwazi Lwemishini
5.4 Uhlaka Lwebhodi Nezimbobo Ezifakwayo
Izitifiketi
6.1 Isimemezelo sokuvumelana kwe-CE DoC (EU)
Simemezela ngaphansi kwesibopho sethu sodwa ukuthi imikhiqizo engenhla ihambisana nezidingo ezibalulekile ze-EU Directives futhi ngenxa yalokho ifanelekela ukuhamba mahhala ezimakethe ezihlanganisa i-European Union (EU) kanye ne-European Economic Area (EEA).
| I-ROHS 2 Directive 2011/65/EU | ||
| Ivumelana ne: | EN50581:2012 | |
| Umhlahlandlela 2014/35/EU. (LVD) | ||
| Ivumelana ne: | EN 60950- 1:2006/A11:2009/A1:2010/Al2:2011/AC:2011 | |
| I-Directive 2004/40/EC & 2008/46/EC EMF | & 2013/35/EU, | |
| Ivumelana ne: | EN 62311:2008 |
6.2 Isimemezelo Sokuvumelana ne-EU RoHS & REACH 211 01/19/2021
Amabhodi e-Arduino ahambisana ne-RoHS 2 Directive 2011/65/EU ye-European Parliament kanye ne-RoHS 3 Directive 2015/863/EU yoMkhandlu wangomhla zizi-4 kuJuni 2015 mayelana nokukhawulelwa kokusetshenziswa kwezinto ezithile eziyingozi ezintweni zikagesi neze-elekthronikhi.
| Into | Umkhawulo omkhulu (ppm) |
| Ukuhola (Pb) | 1000 |
| I-Cadmium (Cd) | 100 |
| I-Mercury (Hg) | 1000 |
| I-Hexavalent Chromium (Cr6+) | 1000 |
| I-Poly Brominated Biphenyls (PBB) | 1000 |
| I-Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| I-Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| I-Benzyl butyl phthalate (BBP) | 1000 |
| I-Dibutyl phthalate (DBP) | 1000 |
| IDiisobutyl phthalate (DIBP) | 1000 |
Ukukhululwa: Akukho ukukhululwa okufunayo.
Amabhodi e-Arduino athobelana ngokugcwele nezimfuneko ezihlobene ze-European Union Regulation (EC) 1907/2006 eziphathelene noBhaliso, Ukuhlola, Ukugunyazwa Nokukhawulwa Kwamakhemikhali (REACH). Simemezela ukuthi awekho ama-SVHC (https://echa.europa.eu/web/guest/candidate-list-table), Uhlu Lwamakhandidethi Lwezinto Ezikhathazayo Eziphakeme Kakhulu ngokugunyazwa okwamanje olukhishwe yi-ECHA, lukhona kuyo yonke imikhiqizo (kanye nephakeji) ngamanani anengqikithi yokuhlushwa elingana noma engaphezu kuka-0.1%. Ngokwazi kwethu konke, siphinde simemezele ukuthi imikhiqizo yethu ayinazo izinto ezisohlwini “Lokugunyazwa” (Isijobelelo XIV semithetho ye-REACH) futhi
Izinto Ezikhathazayo Eziphakeme Kakhulu (SVHC) kunoma imaphi amanani abalulekile njengoba kushiwo I-Annex XVII Yohlu Lwamakhandidethi olushicilelwe yi-ECHA (European Chemical Agency) 1907 /2006/EC.
6.3 Isimemezelo Sezimbiwa Ezingqubuzanayo
Njengomphakeli womhlaba wonke wezingxenye zikagesi nezikagesi, i-Arduino iyazazi izibopho zethu maqondana nemithetho nemithethonqubo ephathelene ne-Conflict Minerals, ikakhulukazi i-Dodd-Frank Wall Street Reform and Consumer Protection Act, Isigaba 1502. I-Arduino ayikhiphi ngokuqondile noma icubungule ukungqubuzana amaminerali afana ne-tin, i-Tantalum, i-Tungsten, noma igolide. Amaminerali angqubuzanayo aqukethwe emikhiqizweni yethu ngendlela ye-solder, noma njengengxenye yama-alloys ensimbi. Njengengxenye yokukhuthala kwethu okunengqondo i-Arduino ithinte abahlinzeki bengxenye ngaphakathi kochungechunge lwethu lokuhlinzeka ukuze baqinisekise ukuqhubeka kwabo nokuthobela imithetho. Ngokusekelwe olwazini esilutholile kuze kube manje simemezela ukuthi imikhiqizo yethu iqukethe Amaminerali Aphikisanayo atholakala ezindaweni ezingenazo izingxabano.
Isexwayiso se-FCC
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Le divayisi ithobela ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Isitatimende Sokuchayeka Kwe-FCC RF:
- Lesi Transmitter akufanele sibekwe endaweni eyodwa noma sisebenze ngokuhlangana nanoma iyiphi enye i-antenna noma isidluliseli.
- Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-RF ebekwe endaweni engalawuleki.
- Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwerediyetha nomzimba wakho.
IsiZulu: Amamanuwali omsebenzisi wezinsiza zomsakazo ezikhishwe ilayisense azoqukatha isaziso esilandelayo noma esifanayo endaweni esobala kumanuwali yomsebenzisi noma ngenye indlela kudivayisi noma kokubili. Le divayisi ithobelana nezinga le-RSS elikhishwe yi-Industrial Canada. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- le divayisi ingase ingabangeli ukuphazamiseka
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.
Isexwayiso se-IC SAR:
IsiZulu Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20 cm phakathi kwerediyetha nomzimba wakho.
Okubalulekile: Izinga lokushisa lokusebenza le-EUT alikwazi ukweqa u-85℃ futhi akufanele libe ngaphansi kuka -40℃.
Ngalokhu, i-Arduino Srl imemezela ukuthi lo mkhiqizo uthobela izimfuneko ezibalulekile nezinye izinhlinzeko ezifanele zeSiqondiso 2014/53/EU. Lo mkhiqizo uvunyelwe ukusetshenziswa kuwo wonke amazwe angamalungu e-EU.
Ulwazi Lwenkampani
| Igama Lenkampani | I-Arduino Srl |
| Ikheli Lenkampani | Via Andrea Appiani 25 20900 MONZA Italy |
Imibhalo Eyisethenjwa
| Ireferensi | Isixhumanisi |
| I-Ardulno IDE (Ideskithophu) | https://www.arduino.cden/Main/Software |
| I-Ardulno IDE (Cloud) | https://create.arduino.cdedltor |
| Cloud IDE Ukuqalisa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduinoweb-editor-4b3e4a |
| I-Ardulno Pro Webindawo | https://www.arduino.cc/pro |
| Ihabhu Yephrojekthi | https://create.arduino.cc/projecthub?by=part&part_Id=11332&sort=trending |
| Ireferensi Yelabhulali | https://www.arduino.cc/reference/en/ |
| Isitolo Esiku-inthanethi | https://store.ardulno.cc/ |
Umlando Wokubuyekeza
| Usuku | Buyekeza | Izinguquko |
| xx/06/2021 | 1 | Ukukhishwa kwe-datasheet |
I-Arduino® UNO R3
Kubuyekezwe: 25/02/2022
Amadokhumenti / Izinsiza
 |
I-ARDUINO UNO R3 SMD Micro Controller [pdf] Incwadi Yeziqondiso UNO R3, SMD Micro Controller, UNO R3 SMD Micro Controller, Micro Controller, Isilawuli |
