UNO R3 SMD Micro Controller
Huahana Huahana
SKU: A000066
Papa kuhikuhi
wehewehe
ʻO ka Arduino UNO R3 ka papa kūpono e kamaʻāina ai i ka uila a me ka coding. Hoʻolako ʻia kēia microcontroller me ka ATmega328P kaulana a me ka ATMega 16U2 Processor.
Hāʻawi kēia papa iā ʻoe i kahi ʻike mua maikaʻi loa i loko o ka honua o Arduino.
Nā wahi i kuhi ʻia:
Mea hana, hoʻolauna, ʻoihana
Nā hiʻohiʻona
Kaʻina hana ATMega328P
- Hoʻomanaʻo
• PPU AVR a hiki i 16 MHz
• 32KB Flash
• 2KB SRAM
• 1KB EEPROM - Palekana
• Mana Ho'ohou (POR)
• ʻIke Brown Out (BOD) - Pilipili
• 2x 8-bit Timer/Counter me kahi hoʻopaʻa inoa manawa i hoʻolaʻa ʻia a hoʻohālikelike i nā kahawai
• 1x 16-bit Timer/Counter me kahi papa inoa manawa i hoʻolaʻa ʻia, hoʻokomo hopu a hoʻohālikelike i nā ala
• 1x USART me ka fractional baud rate generator a me ka hoʻomaka-o-frame ʻike
• 1x mea hoʻoponopono/pilipili Serial Peripheral Interface (SPI)
• 1x Mea hoʻoponopono i ke ʻano ʻelua / peripheral I2C
• 1x Analog Comparator (AC) me kahi hoʻokomo kuhikuhi scalable
• Watchdog Timer me ka oscillator on-chip kaawale
• ʻEono mau kaha PWM
• Hoʻopau a ala i ka hoʻololi ʻana i ke pine - ATMega16U2 Mea Hana
• 8-bit AVR® RISC-ka microcontroller - Hoʻomanaʻo
• 16 KB ISP Flash
• 512B EEPROM
• 512B SRAM
• debugWIRE interface no ka hoʻopololei a me ka hoʻolālā ʻana - Ka mana
• 2.7-5.5 volts
Ka Papa
1.1 Noi Examples
ʻO ka papa UNO ka huahana nui o Arduino. Inā he mea hou ʻoe i ka honua o ka uila a hoʻohana paha i ka UNO ma ke ʻano he mea hana no ka hoʻonaʻauao a i ʻole nā hana pili i ka ʻoihana.
Ke komo mua i ka uila: Inā ʻo kēia kāu papahana mua i loko o ka coding a me ka uila, e hoʻomaka me kā mākou papa i hoʻohana nui ʻia a palapala ʻia; Arduino UNO. Hoʻolako ʻia me ka kaʻina hana ATmega328P kaulana, 14 kiʻi helu komo / puka puka, 6 analog inputs, USB pili, ICSP poʻomanaʻo a me ka pihi hoʻihoʻi. Aia kēia papa i nā mea a pau āu e makemake ai no ka ʻike mua maikaʻi me Arduino.
Papa hoʻomohala maʻamau ʻoihana: Ke hoʻohana nei i ka papa Arduino UNO i nā ʻoihana, aia nā ʻano hui e hoʻohana ana i ka papa UNO ma ke ʻano he lolo no kā lākou PLC.
Nā kumu hoʻonaʻauao: ʻOiai ua noho pū ka papa UNO me mākou no kahi o ʻumi makahiki, hoʻohana nui ʻia ia no nā kumu hoʻonaʻauao like ʻole a me nā papahana ʻepekema. ʻO ke kūlana kiʻekiʻe a me ka hana kiʻekiʻe o ka papa e lilo ia i kumu waiwai maikaʻi loa e hopu i ka manawa maoli mai nā mea ʻike a me ka hoʻoulu ʻana i nā mea hana hana paʻakikī e haʻi i kekahi mau examples.
1.2 Nā huahana pili
- Mea hoʻomaka
- ʻO Tinkerkit Braccio Robot
- Example
Heluhelu
2.1 Manaʻo ʻia nā kūlana hana
| hōʻailona | wehewehe | Min | Max |
| Nā palena wela conservative no ka papa holoʻokoʻa: | -40 °C (-40°F) | 85 °C (185°F) |
MANAʻO: I ka wela loa, EEPROM, voltage regulator, a me ka oscillator kristal, ʻaʻole paha e hana e like me ka mea i manaʻo ʻia ma muli o ke kūlana wela loa
2.2 Hoʻohana mana
| hōʻailona | wehewehe | Min | ʻAno | Max | Unite |
| VINMax | Kaha hoʻokomo kiʻekiʻetage mai VIN pad | 6 | – | 20 | V |
| VUSBMax | Kaha hoʻokomo kiʻekiʻetage mai ka mea hoʻopili USB | – | – | 5.5 | V |
| PMax | Hoʻohana mana kiʻekiʻe | – | xx | mA |
Hana ma lunaview
3.1 Papa Topology
luna view
| Ref. | wehewehe | Ref. | wehewehe |
| X1 | Kāleka mana 2.1×5.5mm | U1 | SPX1117M3-L-5 Luna Hooponopono |
| X2 | Hoʻohui USB B | U3 | ATMEGA16U2 Module |
| PC1 | EEE-1EA470WP 25V SMD Capacitor | U5 | LMV358LIST-A.9 IC |
| PC2 | EEE-1EA470WP 25V SMD Capacitor | F1 | Chip Capacitor, Kiekie Kiekie |
| D1 | CGRA4007-G Hoʻoponopono | ICSP | Hoʻohui poʻomanaʻo pine (ma ka puka 6) |
| J-ZU4 | Module ATMEGA328P | ICSP1 | Hoʻohui poʻomanaʻo pine (ma ka puka 6) |
| Y1 | ECS-160-20-4X-DU Oscillator |
3.2 Mea Hana
ʻO ke kaʻina hana nui he ATmega328P e holo ana ma luna o 20 MHz. Hoʻopili ʻia ka hapa nui o kāna mau pine i nā poʻo o waho, akā mālama ʻia kekahi no ke kamaʻilio kūloko me ka USB Bridge coprocessor.
3.3 Laau Mana
Laau mana
Kaao:
| ʻāpana |  Mana I / ʻO |
 ʻAno hoʻololi |
 Max Nānā |
 Voltage Laulā |
Hana Papa
4.1 Hoʻomaka - IDE
Inā makemake ʻoe e hoʻolālā i kāu Arduino UNO i ka wā ma waho, pono ʻoe e hoʻokomo i ka Arduino Desktop IDE [1] No ka hoʻopili ʻana i ka Arduino UNO i kāu kamepiula, pono ʻoe i kahi kelepona USB Micro-B. Hāʻawi kēia i ka mana i ka papa, e like me ka mea i hōʻike ʻia e ka LED.
4.2 Hoʻomaka - Arduino Web Lunahooponopono
ʻO nā papa Arduino āpau, me kēia, hana ma waho o ka pahu ma ka Arduino Web Lunahooponopono [2], ma ka hookomo wale ana i ka plugin maalahi.
ʻO Arduino Web Hoʻokipa ʻia ka Lunahooponopono ma ka pūnaewele, no laila e hoʻomau mau ʻia me nā hiʻohiʻona hou loa a me ke kākoʻo no nā papa āpau. E hahai i [3] e hoʻomaka i ka hoʻopaʻa inoa ma ka polokalamu kele pūnaewele a hoʻouka i kāu mau kiʻi kiʻi ma kāu papa.
4.3 Hoʻomaka - Arduino IoT Cloud
Kākoʻo ʻia nā huahana Arduino IoT āpau ma Arduino IoT Cloud e hiki ai iā ʻoe ke hoʻopaʻa inoa, ka pakuhi a me ka nānā ʻana i ka ʻikepili sensor, hoʻoulu i nā hanana, a hoʻomaʻamaʻa i kou home a ʻoihana paha.
4.4 Sample Nā kiʻi kiʻi
SampHiki ke loaʻa nā kiʻi kiʻi no ka Arduino XXX ma ka "Examples" ma ka Arduino IDE a i ʻole ma ka ʻāpana "Documentation" o ka Arduino Pro webkahua [4]
4.5 Nā kumuwaiwai pūnaewele
I kēia manawa ua hele ʻoe i nā kumu o ka mea hiki iā ʻoe ke hana me ka papa hiki iā ʻoe ke ʻimi i nā mea hiki ʻole ke hāʻawi ʻia ma ka nānā ʻana i nā papahana hoihoi ma Project Hub [5], ka Arduino Library Reference [6] a me ka hale kūʻai pūnaewele [7] kahi hiki iā ʻoe ke hoʻokō i kāu papa me nā mea ʻike, nā mea hoʻokele a me nā mea hou aku
4.6 Hoola Papa
Loaʻa i nā papa Arduino āpau kahi bootloader i kūkulu ʻia e hiki ai ke hoʻolohi i ka papa ma o USB. Inā hoʻopaʻa ʻia kahi kiʻi kiʻi i ke kaʻina hana a ʻaʻole hiki ke kiʻi hou ʻia ka papa ma o USB hiki ke komo i ke ʻano bootloader ma ke kaomi pālua ʻana i ke pihi hoʻihoʻi ma hope pono o ka mana.
Nā Pinout Hoʻohui
5.1 JANALOG
| Pin | Hana | ʻAno | wehewehe |
| 1 | NC | NC | ʻAʻole pili |
| 2 | IOREF | IOREF | Hōʻike no ka loiloi kikohoʻe V - pili iā 5V |
| 3 | Hoʻoponopono hou | Hoʻoponopono hou | Hoʻoponopono hou |
| 4 | +3V3 | Ka mana | + 3V3 Mana Alanui |
| 5 | +5V | Ka mana | + 5V Mana Alanui |
| 6 | GND | Ka mana | Ka honua |
| 7 | GND | Ka mana | Ka honua |
| 8 | VIN | Ka mana | Voltage hoʻokomo |
| 9 | AO | Analog/GPIO | Hoʻokomo analog 0 /GPIO |
| 10 | Al | Analog/GPIO | Hoʻokomo analog 1 /GPIO |
| 11 | A2 | Analog/GPIO | Hoʻokomo analog 2 /GPIO |
| 12 | A3 | Analog/GPIO | Hoʻokomo analog 3 /GPIO |
| 13 | A4/SDA | Hoʻokomo analog/12C | Hoʻokomo analog 4/12C Laina ʻikepili |
| 14 | A5/SCL | Hoʻokomo analog/12C | Hoʻokomo analog 5/12C Laina uaki |
5.2 JDIGITAL
| Pin | Hana | ʻAno | wehewehe |
| 1 | DO | Kikohoʻe/GPIO | Pin kikohoʻe 0/GPIO |
| 2 | D1 | Kikohoʻe/GPIO | Pin kikohoʻe 1/GPIO |
| 3 | D2 | Kikohoʻe/GPIO | Pin kikohoʻe 2/GPIO |
| 4 | D3 | Kikohoʻe/GPIO | Pin kikohoʻe 3/GPIO |
| 5 | D4 | Kikohoʻe/GPIO | Pin kikohoʻe 4/GPIO |
| 6 | DS | Kikohoʻe/GPIO | Pin kikohoʻe 5/GPIO |
| 7 | D6 | Kikohoʻe/GPIO | Pin kikohoʻe 6/GPIO |
| 8 | D7 | Kikohoʻe/GPIO | Pin kikohoʻe 7/GPIO |
| 9 | D8 | Kikohoʻe/GPIO | Pin kikohoʻe 8/GPIO |
| 10 | D9 | Kikohoʻe/GPIO | Pin kikohoʻe 9/GPIO |
| 11 | SS | Kikohoʻe | Koho SPI Chip |
| 12 | MOSI | Kikohoʻe | SPI1 Main Out Secondary In |
| 13 | MISO | Kikohoʻe | SPI Main ma ke kula kiʻekiʻe |
| 14 | SCK | Kikohoʻe | SPI huaʻina uaki |
| 15 | GND | Ka mana | Ka honua |
| 16 | AREF | Kikohoʻe | Analog reference voltage |
| 17 | A4/SD4 | Kikohoʻe | Laina ikepili helu 4/12C (hoʻopālua) |
| 18 | A5/SDS | Kikohoʻe | Hoʻokomo analog 5/12C Laina uaki (hoʻopaʻa ʻia) |
5.3 ʻIke Mechanical
5.4 Papa Outline a me na lua kau mau
Nā palapala hōʻoia
6.1 Hōʻike no ka Kulike CE DoC (EU)
Ke haʻi aku nei mākou ma lalo o kā mākou kuleana hoʻokahi e pili ana nā huahana i luna me nā koi koʻikoʻi o ka EU Directives a no laila ua kūpono i ka neʻe manuahi i loko o nā mākeke e pili ana i ka European Union (EU) a me ka European Economic Area (EEA).
| ROHS 2 Directive 2011/65/EU | ||
| Kūlike me: | EN50581:2012 | |
| Kuhikuhi 2014/35/EU. (LVD) | ||
| Kūlike me: | EN 60950- 1:2006/A11:2009/A1:2010/Al2:2011/AC:2011 | |
| Kuhikuhi 2004/40/EC & 2008/46/EC EMF | & 2013/35/EU, | |
| Kūlike me: | EN 62311:2008 |
6.2 Hōʻike i ka ʻae ʻana i ka EU RoHS & REACH 211 01/19/2021
Hoʻopili nā papa Arduino i ka RoHS 2 Directive 2011/65/EU o ka European Parliament a me RoHS 3 Directive 2015/863/EU o ka Council of 4 June 2015 ma ka palena o ka hoʻohana ʻana i kekahi mau mea pōʻino i nā lako uila a me nā lako uila.
| mea waiwai | palena palena kiʻekiʻe (ppm) |
| Kēpau (Pb) | 1000 |
| Kāmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Hoʻokuʻu ʻia: ʻAʻole koi ʻia nā hoʻokuʻu.
Hoʻokō piha nā Papa Arduino i nā koi pili o ka European Union Regulation (EC) 1907/2006 e pili ana i ke kākau inoa, loiloi, ʻae a me ka hoʻopaʻa ʻana i nā mea kemika (REACH). ʻAʻole mākou e haʻi aku i kekahi o nā SVHC (https://echa.europa.eu/web/guest/candidate-list-table), aia ka papa inoa o nā mea i manaʻo nui ʻia no ka ʻae i hoʻokuʻu ʻia e ECHA i kēia manawa ma nā huahana āpau (a me ka pūʻolo pū kekahi) i ka nui o ka hoʻonui ʻana i ka helu like a i ʻole ma luna o 0.1%. I ka maikaʻi o ko mākou ʻike, ke haʻi aku nei mākou ʻaʻole i loaʻa i kā mākou huahana kekahi o nā mea i helu ʻia ma ka "Papa inoa ʻae" (Annex XIV o nā lula REACH) a
Nā mea o ka hopohopo kiʻekiʻe loa (SVHC) ma nā huina nui e like me ka mea i kuhikuhi ʻia e ka Annex XVII o ka papa inoa o nā moho i paʻi ʻia e ECHA (European Chemical Agency) 1907 /2006/EC.
6.3 Hōʻike Kūkākūkā Minerala
Ma ke ʻano he mea hoʻolako honua o nā ʻāpana uila a me ka uila, ʻike ʻo Arduino i kā mākou kuleana e pili ana i nā kānāwai a me nā hoʻoponopono e pili ana i nā Conflict Minerals, ʻo ia hoʻi ka Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. nā mineral e like me Tin, Tantalum, Tungsten, a i ʻole gula. Aia nā mineral conflict i loko o kā mākou huahana ma ke ʻano o ka solder, a i ʻole ma ke ʻano he ʻāpana i nā mea hao. Ma ke ʻano he ʻāpana o kā mākou mākau kūpono kūpono ua hoʻopili ʻo Arduino i nā mea hoʻolako ʻāpana i loko o kā mākou kaulahao lako e hōʻoia i ko lākou hoʻomau ʻana i nā lula. Ma muli o ka ʻike i loaʻa a hiki i kēia manawa ke haʻi aku nei mākou aia kā mākou huahana i nā Conflict Minerals i loaʻa mai nā wahi hakakā ʻole.
FCC akahele
ʻO nā hoʻololi a i ʻole nā hoʻololi i ʻae ʻole ʻia e ka ʻaoʻao kuleana no ka hoʻokō hiki ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā lako.
Hoʻopili kēia mea hana i ka ʻāpana 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino
- pono e ʻae kēia hāmeʻa i nā hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.
ʻO FCC RF Radiation Exposure Statement:
- ʻAʻole pono e hoʻopili ʻia kēia Transmitter a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
- Hoʻopili kēia mea hana i nā palena hōʻike radiation RF i hoʻonohonoho ʻia no kahi kaiapuni ʻole.
- Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20cm ma waena o ka radiator a me kou kino.
Pelekania: E loa'a i nā manuale mea ho'ohana no ka mea lekiō i ho'oku'u 'ia ka laikini ka ho'olaha ma lalo iho a i 'ole ka like ma kahi i 'ike 'ia ma ka manual mea ho'ohana a i 'ole ma ka mea hana a i 'ole ia mau mea 'elua. Hoʻopili kēia hāmeʻa i ka maʻamau RSS i hoʻokuʻu ʻia i ka laikini ʻo Industry Canada. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia
- pono e ʻae kēia hāmeʻa i kekahi keakea, me ke keakea ʻana e hiki ai ke hoʻohana ʻole ʻia ka mea hana.
'Ōlelo Aʻo IC SAR:
'Ōlelo Pelekania Pono e ho'okomo a ho'ohana 'ia me ka li'ili'i loa he 20 knm ma waena o ka radiator a me kou kino.
mea nui: ʻAʻole hiki ke ʻoi aku ka mahana hana o ka EUT ma mua o 85 ℃ a ʻaʻole pono e emi ma lalo o -40 ℃.
Ma kēia, haʻi aku ʻo Arduino Srl e pili ana kēia huahana i nā koi koʻikoʻi a me nā ʻōlelo kūpono ʻē aʻe o Directive 2014/53/EU. Ua ʻae ʻia kēia huahana e hoʻohana i nā mokuʻāina lālā o EU.
ʻIkepili Hui
| inoa hui | Arduino Srl |
| Wahi Hui | Via Andrea Appiani 25 20900 MONZA Italia |
Palapala Kuhikuhi
| Kuhikuhi | loulou |
| Ardulno IDE (Pakukau) | https://www.arduino.cden/Main/Software |
| Ardulno IDE (Kapua) | https://create.arduino.cdedltor |
| Ka Hoʻomaka ʻana o Cloud IDE | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduinoweb-editor-4b3e4a |
| ʻO Ardulno Pro Webpaena | https://www.arduino.cc/pro |
| Papahana Hub | https://create.arduino.cc/projecthub?by=part&part_Id=11332&sort=trending |
| Ka Waihona Puke | https://www.arduino.cc/reference/en/ |
| Hale kūʻai pūnaewele | https://store.ardulno.cc/ |
Moolelo Hooponopono
| Lā | Hoʻoponopono | Nā hoʻololi |
| xx/06/2021 | 1 | Hoʻokuʻu ʻikepili |
Arduino® UNO R3
Hoʻololi ʻia: 25/02/2022
Palapala / Punawai
 |
ARDUINO UNO R3 SMD Micro Controller [pdf] Palapala Aʻo UNO R3, SMD Micro Controller, UNO R3 SMD Micro Controller, Micro Controller, Mea hoʻoponopono |
