I-LS XPL-BSSA Isilawuli Sengqondo Esihlelekayo
Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngokucophelela ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha, bese uphatha imikhiqizo ngendlela efanele.
Izinyathelo Zokuphepha
- Incazelo yelebula yesixwayiso nesixwayiso
ISEXWAYISO
ikhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu.
ISEXWAYISO
ikhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile
ISEXWAYISO
- Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
- Qiniseka ukuthi azikho izindaba zensimbi zangaphandle.
- Ungalisebenzisi kabi ibhethri(shaja, qaqa, ukushaya, mfushane, ukusoda).
ISEXWAYISO
- Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo
- Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo
- Ungafaki izinto ezivuthayo endaweni ezungezile
- Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile
- Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise noma uguqule umkhiqizo
- Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
- Qiniseka ukuthi umthwalo wangaphandle aweqi isilinganiso semojuli yokuphumayo.
- Lapho ulahla i-PLC nebhethri, yiphathe njengodoti wezimboni.
- Isiginali ye-I/O noma ulayini wokuxhumana uzoxhunywa okungenani i-100mm kude nevolthi ephezulutagikhebula le-e noma ulayini wamandla.
Indawo yokusebenza
- Ukuze ufake, bheka izimo ezilandelayo.
| Cha | Into | Ukucaciswa | Okujwayelekile | |||
| 1 | I-Ambient temp. | 0 ~ 55℃ | – | |||
| 2 | Izinga lokushisa lesitoreji. | -25 ~ 70℃ | – | |||
| 3 | Umswakama we-ambient | 5 ~ 95%RH, ayinciphisi | – | |||
| 4 | Umswakama wesitoreji | 5 ~ 95%RH, ayinciphisi | – | |||
|
5 |
Ukumelana Nokudlidliza |
Ukudlidliza ngezikhathi ezithile | – | – | ||
| Imvamisa | Ukusheshisa | Ampukufunda | Inombolo |
I-IEC 61131-2 |
||
| 5≤f<8.4㎐ | – | 3.5 mm | Izikhathi eziyi-10 ohlangothini ngalunye
okwe X kanye no-Z |
|||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | ||||
| Ukudlidliza okuqhubekayo | ||||||
| Imvamisa | Ukusheshisa | Ampukufunda | ||||
| 5≤f<8.4㎐ | – | 1.75 mm | ||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | ||||
Isoftware Yokusekela Esebenzayo
- Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.
- XPL-BSSA: V1.5 noma ngaphezulu
- Isofthiwe ye-XG5000 : V4.00 noma ngaphezulu
Izesekeli kanye Nemininingwane Yekhebula
Hlola i-Profibus Connector equkethwe ebhokisini
- Ukusetshenziswa: I-Profibus Communication Connector
- Into: GPL-CON
Uma usebenzisa ukuxhumana kwe-Pnet, ikhebula elisontekile elivikelekile lizosetshenziswa ngokucabangela ibanga nesivinini sokuxhumana.
- Umkhiqizi: I-Belden noma omunye umkhiqizi wezinto ezifanayo
- Ukucaciswa kwekhebula
| Ukwahlukanisa | Incazelo | |
| AWG | 22 |  |
| Uhlobo | I-BC (Ithusi Elingenalutho) | |
| I-Insulation | I-PE (i-Polyethylene) | |
| Ububanzi(intshi) | 0.035 | |
| Isihlangu | I-aluminium Foil-Polyester,
I-Tape/Braid Shield |
|
| Umthamo(pF/ft) | 8.5 | |
| Isici
i-impedance(Ω) |
awu 150Ω | |
Izingxenye igama kanye Dimension
Lena ingxenye engaphambili yomkhiqizo. Bheka igama ngalinye uma usebenzisa uhlelo. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
Imininingwane ye-LED
| I-LED | Isimo | Incazelo |
|
GIJIMA |
On | Okuvamile |
| Valiwe | Iphutha elibucayi | |
|
Ukucwayiza |
1. Isimo esilungile
2. Ukuzihlola 3. Ikhebula liyakhishwa ngemva kokuvulwa kwe-RUN LED 4. Imojuli ye-I/O iyasuswa ngemva kokuvulwa kwe-RUN LED 5. Imojuli ye-I/O ayifakiwe 6. Amaphoyinti e-I/O eqa umkhawulo 7. Inombolo yemojula ye-I/O ingaphezu komkhawulo |
|
| I/O
IPHUTHA |
On | Uma kungekho mpendulo kumojuli ye-I/O |
| Valiwe | Okuvamile | |
| NET | On | Okuvamile |
| Valiwe | Akukho ukushintshaniswa kwedatha | |
| IPHUTHA | On | Isimo sephutha |
| Valiwe | Ibonisa ukudluliswa kwedatha |
Ukufaka / Ukukhipha Amamojula
- Nansi indlela yokunamathisela imojuli ngayinye esisekelweni noma ukuyisusa.
- Ifaka imojuli
- Uma imojula yokufaka/yokukhipha isandiso ifakiwe, donsela amalevu amabili emojula ye-adaptha phezulu.
- Phusha umkhiqizo bese uxhuma isivumelwano nehhuku ukuze kulungiswe imiphetho emine kanye nehhuku yokuxhuma
- Ngemuva kokuxhuma, thola phansi i-hook ukuze ulungise futhi uyilungise ngokuphelele
- Ikhipha imojuli
- Phusha i-hook ukuze unqamule.
- Hlukanisa umkhiqizo ngezandla ezimbili. (Ungakuphoqi.)
Izintambo
- Isakhiwo sesixhumi nendlela yokufaka izintambo
- Umugqa wokufaka: umugqa oluhlaza uxhumeke ku-A1, umugqa obomvu uxhumeke ku-B1
- Umugqa wokukhiphayo: umugqa oluhlaza uxhumeke ku-A2, umugqa obomvu uxhumeke ku-B2
- Xhuma isihlangu ku-clamp yesihlangu
- Uma ufaka isixhumi kutheminali, faka ikhebula ku-A1, B1
- Ukuze uthole ulwazi olwengeziwe mayelana nezintambo, bheka imanuwali yomsebenzisi.
Iwaranti
- Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
- Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS ELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
Okukhishiwe kuwaranti
- Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
- Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
- Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
- Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
- Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
- Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
- Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
- Amanye amacala lapho i-LS ELECTRIC ingenacala
- Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
- Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.
I-LS ELECTRIC Co., Ltd
- www.ls-electric.com
- I-imeyili: automation@ls-electric.com
- Indlunkulu/Seoul Office Ucingo: 82-2-2034-4033,4888,4703
- Ihhovisi le-LS ELECTRIC Shanghai (China) Ucingo: 86-21-5237-9977
- I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Ucingo: 86-510-6851-6666
- I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Ucingo: 84-93-631-4099
- I-LS ELECTRIC Middle East FZE (Dubai, UAE) Ucingo: 971-4-886-5360
- I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Ucingo: 31-20-654-1424
- I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Ucingo: 81-3-6268-8241
- I-LS ELECTRIC America Inc. (Chicago, USA) Ucingo: 1-800-891-2941
- Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
imibuzo ejwayelekile ukubuzwa
Q: Yini okufanele ngiyenze uma idivayisi ibonisa ikhodi yephutha?
A: Amakhodi ephutha akhombisa izinkinga ezithile ngedivayisi. Bheka kumanuwali yomsebenzisi ukuhlonza incazelo yekhodi yephutha bese ulandela izenzo ezinconyiwe.
Q: Ngingakwazi ukwandisa umthamo wokufaka/okukhiphayo wale PLC?
A: Yebo, amamojula engeziwe okunweba ayatholakala ukuze kukhuliswe umthamo wokufaka/okukhiphayo Wesilawuli Sengqondo Ehlelekayo. Bheka imibhalo yomkhiqizo ukuze uthole imiyalelo yokuhambisana neyokufaka.
Amadokhumenti / Izinsiza
 |
I-LS XPL-BSSA Isilawuli Sengqondo Esihlelekayo [pdf] Umhlahlandlela wokufaka XPL-BSSA, SIO-8, XPL-BSSA Isilawuli Sengqondo Ehlelekayo, Isilawuli Sengqondo Ehlelekayo, Isilawuli Sengqondo, Isilawuli |