LS XPL-BSSA Selaoli sa Monahano se Reriloeng
Tataiso ena ea ho kenya e fana ka tlhaiso-leseling e bonolo ea ts'ebetso bakeng sa taolo ea PLC. Ka kopo bala ka hloko leqephe lena la data le libuka ka hloko pele u sebelisa lihlahisoa. Haholo-holo bala litemoso, ebe u tšoara lihlahisoa hantle.
Litlhokomelo tsa Tšireletso
- Moelelo oa lengolo la tlhokomeliso le tlhokomeliso
TLHOKOMELO
e bontša boemo bo ka bang kotsi, boo haeba bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe.
TLHOKOMELO
e bonts'a boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang
TLHOKOMELO
- Se ke oa ikopanya le lits'oants'o ha motlakase o sebelisoa.
- Etsa bonnete ba hore ha ho na litaba tsa tšepe tse tsoang kantle ho naha.
- Se ke oa sebelisa betri (tefisa, harola, e otla, e khuts'oane, e sollang).
TLHOKOMELO
- Etsa bonnete ba hore u sheba rated voltage le tlhophiso ea terminal pele ho terata
- Ha o kenya lithapo, tiisa screw ea "terminal block" ka mefuta e boletsoeng ea torque
- Se ke oa kenya lintho tse tukang linthong tse tikolohong
- Se ke oa sebelisa PLC sebakeng sa ho thothomela ka kotloloho
- Ntle le basebeletsi ba litšebeletso tsa litsebi, u se ke ua qhaqha kapa ua lokisa kapa ua fetola sehlahisoa
- Sebelisa PLC tikolohong e kopanang le lintlha tse akaretsang tse fuperoeng ke database ena.
- Etsa bonnete ba hore mojaro o kantle ha o fete tekanyo ea mojule oa tlhahiso.
- Ha u lahla PLC le betri, e tšoare joalo ka litšila tsa indasteri.
- Letšoao la I/O kapa mohala oa puisano o tla kengoa ka terata bonyane 100mm hole le leqhubu le phahamengtagthapo kapa mohala oa motlakase.
Tikoloho ya Tshebetso
- Ho kenya, hlokomela maemo a latelang.
| Che | Ntho | Tlhaloso | Standard | |||
| 1 | Mocheso oa tikoloho. | 0 ~ 55℃ | – | |||
| 2 | Mocheso oa polokelo. | -25 ~ 70 ℃ | – | |||
| 3 | Mongobo wa tikoloho | 5 ~ 95%RH, e sa fokotseng | – | |||
| 4 | Mongobo wa polokelo | 5 ~ 95%RH, e sa fokotseng | – | |||
|
5 |
Ho hanyetsana le Vibration |
Ho thothomela nako le nako | – | – | ||
| Khafetsa | Ho potlakisa | Amptsebo | Nomoro |
Tlhaloso: IEC 61131-2 |
||
| 5≤f<8.4㎐ | – | 3.5 limilimithara | Ka makhetlo a 10 ka lehlakoreng le leng le le leng
bakeng sa X LE Z |
|||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | ||||
| Ho thothomela ho sa feleng | ||||||
| Khafetsa | Ho potlakisa | Amptsebo | ||||
| 5≤f<8.4㎐ | – | 1.75 limilimithara | ||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | ||||
Sebetsa Tšehetso Software
- Bakeng sa tlhophiso ea sistimi, mofuta o latelang oa hlokahala.
- XPL-BSSA: V1.5 kapa ka holimo
- XG5000 Software : V4.00 kapa ka holimo
Lisebelisoa le Litlhaloso tsa Cable
Sheba Sehokelo sa Profibus se ka lebokoseng
- Tšebeliso: Sehokelo sa Puisano ea Profibus
- Ntho ea bohlokoa: GPL-CON
Ha o sebelisa puisano ea Pnet, thapo e sothehileng e sirelelitsoeng e tla sebelisoa ho nahanoa ka sebaka sa puisano le lebelo.
- Moetsi: Belden kapa moetsi e mong oa thepa e lekanang
- Tlhaloso ea Cable
| Karolelano | Tlhaloso | |
| AWG | 22 |  |
| Mofuta | BC (Bare Copper) | |
| Insulation | PE (Polyethylene) | |
| Diameter(inch) | 0.035 | |
| Thebe | Aluminium Foil Polyester,
Theipi/Braid Shield |
|
| Matla (pF/ft) | 8.5 | |
| Sebopeho
impedance(Ω) |
150Ω | |
Likarolo lebitso le Dimension
Ena ke karolo e ka pele ea sehlahisoa. Sheba lebitso le leng le le leng ha u sebelisa sistimi. Ho fumana lintlha tse ling, sheba bukana ea mosebelisi.
Lintlha tsa LED
| LED | Boemo | Tlhaloso |
|
MATSHA |
On | Tloaelehileng |
| E tima | Phoso e kholo | |
|
panya |
1. Boemo ba ho itokisa
2. Ho itlhahloba 3. Cable e tlosoa ka mor'a hore RUN LED e butsoe 4. Mojule oa I / O o tlosoa ka mor'a hore RUN LED e bulehe 5. Mojule oa I/O ha oa kengoa 6. Lintlha tsa I/O li feta moeli 7. Palo ea mojule oa I/O e feta moeli |
|
| I/O
PHOSO |
On | Ha ho se na karabelo mojuleng oa I/O |
| E tima | Tloaelehileng | |
| NET | On | Tloaelehileng |
| E tima | Ha ho phapanyetsano ea data | |
| PHOSO | On | Boemo ba phoso |
| E tima | E bontša phetiso ea data |
Ho kenya / ho tlosa li-module
- Mona ke mokhoa oa ho hokela module ka 'ngoe setsing kapa ho e tlosa.
- Ho kenya module
- Ha mojule oa katoloso/output o kentsoe, hula lithapo tse peli tsa mojule oa adaptara holimo.
- Sututsa sehlahisoa 'me u se kopanye tumellano le hook bakeng sa ho lokisa likarolo tse' nè le hook bakeng sa ho hokahanya
- Ka mor'a ho hokahanya, theoha hook bakeng sa ho lokisa le ho e lokisa ka ho feletseng
- Ho tlosa mojule
- Sutumetsa hook bakeng sa ho khaola.
- Tlosa sehlahisoa ka matsoho a mabeli. (Se ke oa e qobella.)
Wiring
- Sebopeho sa sehokelo le mokhoa oa likhoele
- Mohala oa ho kenya: mola o motala o hokahane le A1, mohala o mofubelu o hokahane le B1
- Mohala oa tlhahiso: mola o motala o hokahane le A2, mohala o mofubelu o hokahane le B2
- Kopanya thebe ho clamp tsa thebe
- Haeba u kenya sehokelo ho terminal, kenya thapo ho A1, B1
- Bakeng sa tlhaiso-leseling e batsi mabapi le wiring, sheba buka ea mosebelisi.
Tiisetso
- Nako ea tiisetso ke likhoeli tse 36 ho tloha ka letsatsi la tlhahiso.
- Tlhahlobo ea pele ea liphoso e lokela ho etsoa ke mosebelisi. Leha ho le joalo, ka kopo, LS ELECTRIC kapa baemeli ba eona ba ka etsa mosebetsi ona ka tefiso. Haeba sesosa sa phoso se fumanoa e le boikarabelo ba LS ELECTRIC, tšebeletso ena e tla ba ntle ho tefo.
Mekhahlelo ho tsoa ho tiisetso
- Ho nkela sebaka sa likarolo tse ka sebelisoang le tse lekanyelitsoeng tsa bophelo (mohlala, li-relay, fuse, capacitor, libeteri, li-LCD, joalo-joalo)
- Ho hloleha kapa tshenyo e bakilweng ke maemo a sa lokang kapa ho tshwara ka ntle ho tse boletsweng bukeng ya mosebedisi
- Ho hloleha ho bakoang ke mabaka a kantle a sa amaneng le sehlahiswa
- Ho hloleha ho bakoang ke liphetoho ntle le tumello ea LS ELECTRIC
- Tšebeliso ea sehlahisoa ka mekhoa e sa lebelloang
- Ho hlōleha ho ke keng ha boleloa esale pele / rarolloa ke theknoloji ea morao-rao ea saense nakong ea tlhahiso
- Ho hloleha ka lebaka la mabaka a kantle joalo ka mollo, matla a sa tloaelehangtage, kapa likoluoa tsa tlhaho
- Linyeoe tse ling tseo LS ELECTRIC e sa ikarabelleng ho tsona
- Bakeng sa tlhaiso-leseling e batsi ka tiisetso, ka kopo sheba bukana ea mosebelisi.
- Likahare tsa tataiso ea ho instola li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea ts'ebetso ea sehlahisoa.
LS ELECTRIC Co., Ltd
- www.ls-electric.com
- E-mail: automation@ls-electric.com
- Ntlo-kholo/Seoul Office Tel: 82-2-2034-4033,4888,4703
- LS ELECTRIC Shanghai Office (Chaena) Tel: 86-21-5237-9977
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Mohala: 86-510-6851-6666
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Mohala: 84-93-631-4099
- LS ELECTRIC Middle East FZE (Dubai, UAE) Mohala: 971-4-886-5360
- LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Mohala: 81-3-6268-8241
- LS ELECTRIC America Inc. (Chicago, USA) Tel: 1-800-891-2941
- Fektheri: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
Lipotso Tse Botsoang Hangata
P: Ke lokela ho etsa eng haeba sesebelisoa se bontša khoutu ea phoso?
A: Likhoutu tsa liphoso li bonts'a litaba tse itseng ka sesebelisoa. Sheba buka ea mosebedisi ho tseba moelelo oa khoutu ea phoso mme u latele liketso tse khothalelitsoeng.
P: A na nka holisa bokhoni ba ho kenya / tlhahiso ea PLC ee?
A: E, li-modules tse eketsehileng tsa katoloso li teng ho eketsa bokhoni ba ho kenya / ho tsoa ho Programmable Logic Controller. Sheba litokomane tsa sehlahisoa bakeng sa ho lumellana le litaelo tsa ho kenya.
Litokomane / Lisebelisoa
 |
LS XPL-BSSA Selaoli sa Monahano se Reriloeng [pdf] Tlhophiso Tataiso XPL-BSSA, SIO-8, XPL-BSSA Taolo ea Monahano e Kenyellelitsoeng, Taolo ea Melaetsa, Selaoli sa Maikutlo, Molaoli |