Okuqukethwe
fihla
I-LS XGK-CPUUN Isilawuli Sengqondo Ehlelekayo
Ulwazi Lomkhiqizo
Imininingwane:
- C/N: 10310000513
- Umkhiqizo: Isilawuli Sengqondo Ehlelekayo
- Amamodeli: XGK-CPUUN, XGK-CPUHN, XGK-CPUSN, XGT CPU, XGK-CPUU, XGK-CPUH, XGK-CPUA, XGK-CPUS, XGK-CPUE, XGI-CPUUN, XGI-CPUU, XGI-CPUH, XGI -CPUS, XGI-CPUE
Imiyalo yokusetshenziswa komkhiqizo
Ukufakwa:
- Qinisekisa ukunikezwa kwamandla okufanelekile kanye nokubeka phansi ngaphambi kokufaka i-PLC.
- Faka i-PLC ngokuphephile endaweni efanelekile enomoya owanele ukuze uvimbele ukushisa ngokweqile.
Ukucushwa:
- Xhuma okokufaka nokukhiphayo ezimbobeni ezikhethiwe ku-PLC ngokuya ngomdwebo wezintambo.
- Setha isofthiwe yokuhlela kudivayisi ehambisanayo ukuze ulungiselele i-PLC yohlelo lwakho lokusebenza oluthile.
Ukusebenza:
- Faka amandla ku-PLC futhi uqaphe izinkomba zesimo ukuze uqinisekise ukusebenza kahle.
- Sebenzisa ingqondo ehleliwe ukuze ulawule amadivayisi axhunyiwe ngokusekelwe kumasiginali okokufaka.
Imibuzo Evame Ukubuzwa (FAQ)
- Q: Iliphi ibanga lokushisa elinconywayo lalokhu I-PLC?
A: Izinga lokushisa elinconywayo lokusebenza ngu -25°C kuya ku-70°C. - Q: Ingabe le PLC ingasetshenziswa ezindaweni ezinomswakama ophezulu?
A: Yebo, i-PLC yakhelwe ukusebenza ezindaweni ezinomswakama ofinyelela ku-95%.
Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha bese uphatha imikhiqizo ngendlela efanele.
Izinyathelo Zokuphepha
Incazelo yelebula yesixwayiso nesixwayiso
 ISEXWAYISO |
ISEXWAYISO sibonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu |
| ISEXWAYISO |
UKUQAPHELA kubonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile |
ISEXWAYISO
- Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
- Qiniseka ukuthi azikho izindaba zangaphandle.
- Ungalisebenzisi ibhethri. (shaja, qaqa, shaya, mfishane, hlanganisa)
ISEXWAYISO
- Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo
- Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo
- Ungafaki izinto ezivuthayo endaweni ezungezile
- Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile
- Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise noma uguqule umkhiqizo
- Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
- Qiniseka ukuthi umthwalo wangaphandle awudluli isilinganiso semodyuli yokukhipha.
- Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.
Indawo yokusebenza
- Ukuze ufake, bheka izimo ezingezansi.
| Cha | Into | Ukucaciswa | Okujwayelekile | ||||
| 1 | I-Ambient temp. | 0 ~ 55℃ | – | ||||
| 2 | Izinga lokushisa lesitoreji. | -25 ~ 70℃ | – | ||||
| 3 | Umswakama we-ambient | 5 ~ 95%RH, ayinciphisi | – | ||||
| 4 | Umswakama wesitoreji | 5 ~ 95%RH, ayinciphisi | – | ||||
| 5 | Ukudlidliza Ukumelana |
Ukudlidliza ngezikhathi ezithile | – | – | |||
| Imvamisa | Ukusheshisa | I-IEC 61131-2 | |||||
| 5≤f<8.4㎐ | – | 3.5 mm | Izikhathi ezingu-10 ohlangothini ngalunye ku-X, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ukudlidliza okuqhubekayo | |||||||
| Imvamisa | Imvamisa | Imvamisa | |||||
| 5≤f<8.4㎐ | – | 1.75 mm | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Isoftware Yokusekela Esebenzayo
Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.
- I-XGI CPUV3.91 noma ngaphezulu / XGI CPU(N) V1.10 noma ngaphezulu
- I-XGK CPUV4.50 noma ngaphezulu / XGK CPU(N) V1.00 noma ngaphezulu
- I-XG5000 SoftwareV3.61 noma ngaphezulu
Izesekeli kanye Nemininingwane Yekhebula
Hlola ibhethri elinamathiselwe kumojuli.
- Kulinganiswe ngo-voltage/yamanje DC 3.0V/1,800mAh
- Isikhathi sewaranti5 unyaka (ku-25 ℃, izinga lokushisa elijwayelekile)
- Isipele Sohlelo/Idatha, ukushayela kwe-RTC uma i-RTC icishiwe
- Ukucaciswa kwe-Manganese dioxide lithium(17.0 X 33.5 mm)
Igama lezingxenye kanye nobukhulu (mm)
Lena ingxenye engaphambili ye-CPU. Bheka igama ngalinye uma usebenzisa uhlelo. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
Ukufaka / Ukukhipha Amamojula
- Lapha kuchaza indlela yokunamathisela imojuli ngayinye kusisekelo noma ukuyisusa.
Ifaka imojuli
- Faka i-lever yokulayisha yengxenye engezansi ye-PLC emgodini ogxilile wemojuli yesisekelo.
- Shelelezisa ingxenye engenhla yemojuli ukuze ulungise kusisekelo, bese uyilinganisa esisekelweni ngokusebenzisa isikulufu sokulungisa imojuli.
- Donsa ingxenye engenhla yemojuli ukuze uhlole ukuthi ifakwe esisekelweni ngokuphelele
Ikhipha imojuli
- Khulula izikulufu ezigxilile zengxenye engenhla yemojuli ukusuka kusisekelo.
- Ngokucindezela ihuku, donsa ingxenye engenhla yemojula ukusuka eksisi yengxenye engezansi yemojuli.
- Ngokuphakamisa imojula phezulu, susa i-lever yokulayisha yemojuli emgodini wokulungisa.
Izintambo
Izintambo zamandla
- Esimeni lapho amandla ephumile ku-voltage, xhuma ivolumu engaguqukitage transformer
- Xhuma amandla anomsindo omncane phakathi kwezintambo noma phakathi komhlaba. Esimeni sokuba nomsindo omkhulu, xhuma isiguquli esihlukanisayo noma isihlungi somsindo.
- Amandla e-PLC, idivayisi ye-I/O neminye imishini kufanele ihlukaniswe.
- Sebenzisa umhlaba ozinikele uma kungenzeka. Uma kwenzeka umsebenzi woMhlaba, sebenzisa umhlaba osezingeni eli-3. (ukumelana nomhlaba 100 Ω noma ngaphansi) futhi Sebenzisa ikhebula lomhlaba elingaphezu kuka-2 mm2.
Uma ukusebenza okungavamile kutholakala ngokusho komhlaba, hlukanisa i-PE yesisekelo nomhlaba.
Iwaranti
- Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
- Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS ELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
- Okukhishiwe kuwaranti
- Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
- Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
- Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
- Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
- Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
- Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
- Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
- Amanye amacala lapho i-LS ELECTRIC ingenacala
- Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
- Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.
I-LS ELECTRIC Co., Ltd. www.ls-electric.com
- I-imeyili: automation@ls-electric.com
- Indlunkulu/Ihhovisi laseSeoul
Ucingo: 82-2-2034-4033,4888,4703 - Ihhovisi le-LS ELECTRIC Shanghai (China)
Ucingo: 86-21-5237-9977 - I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Ucingo: 86-510-6851-6666 - I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Ucingo: 84-93-631-4099 - I-LS ELECTRIC Middle East FZE (Dubai, UAE)
Ucingo: 971-4-886-5360 - I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
Ucingo: 31-20-654-1424 - I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Ucingo: 81-3-6268-8241 - I-LS ELECTRIC America Inc. (Chicago, USA)
Ucingo: 1-800-891-2941 - Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Amadokhumenti / Izinsiza
 |
I-LS XGK-CPUUN Isilawuli Sengqondo Ehlelekayo [pdf] Umhlahlandlela wokufaka XGK-CPUUN, CPUHN, CPUSN, XGK-CPUU, CPUH, CPUA, CPUS, CPUE, XGI-CPUUN, CPUU, CPUH, CPUS, CPUE, XGK-CPUUN Programmable Logic Controller, XGK-CPUUN, Programmable Logic Controller, Logic Controller, Isilawuli |
