Abubuwan da ke ciki
boye
LS XGK-CPUUN Mai Gudanar da Dabarun Shirye-shiryen
Bayanin samfur
Ƙayyadaddun bayanai:
- Saukewa: 10310000513
- Samfura: Mai sarrafa dabaru na shirye-shirye
- Model: XGK-CPUUN, XGK-CPUHN, XGK-CPUSN, XGT CPU, XGK-CPUU, XGK-CPUH, XGK-CPUA, XGK-CPUS, XGK-CPUE, XGI-CPUUN, XGI-CPUU, XGI-CPUH, XGI - CPU, XGI-CPU
Umarnin Amfani da samfur
Shigarwa:
- Tabbatar da ingantaccen samar da wutar lantarki da ƙasa kafin shigar da PLC.
- Dutsen PLC amintacce a wuri mai dacewa tare da isassun iska don hana zafi.
Tsari:
- Haɗa na'urorin shigarwa da fitarwa zuwa wuraren da aka keɓance akan PLC bisa ga zanen waya.
- Saita software na shirye-shirye akan na'ura mai jituwa don saita PLC don takamaiman aikace-aikacenku.
Aiki:
- Ƙaddamar da PLC kuma saka idanu masu alamun matsayi don tabbatar da aiki mai kyau.
- Aiwatar da dabarar da aka tsara don sarrafa na'urorin da aka haɗa bisa siginar shigarwa.
Tambayoyin da ake yawan yi (FAQ)
- Tambaya: Menene shawarar yanayin zafin aiki don wannan PLC?
A: Matsayin zafin aiki da aka ba da shawarar shine -25°C zuwa 70°C. - Tambaya: Za a iya amfani da wannan PLC a cikin yanayi mai zafi?
A: Ee, an tsara PLC don yin aiki a cikin mahalli tare da kusan 95% zafi.
Wannan jagorar shigarwa yana ba da bayanin ayyuka masu sauƙi na sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta matakan tsaro sannan sarrafa samfuran da kyau.
Kariyar Tsaro
Ma'anar lakabin gargaɗi da taka tsantsan
 GARGADI |
GARGAƊI yana nuna wani yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani. |
| HANKALI |
HANKALI yana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙaramin rauni ko matsakaici. Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci |
GARGADI
- Kada a tuntuɓi tashar yayin amfani da wutar.
- Tabbatar cewa babu al'amuran waje.
- Kar a sarrafa baturin. (caji, tarwatsa, bugawa, gajere, siyarwa)
HANKALI
- Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi
- Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tasha tare da ƙayyadadden kewayon juzu'i
- Kada a shigar da abubuwa masu ƙonewa akan kewaye
- Kada kayi amfani da PLC a cikin mahallin girgiza kai tsaye
- Sai dai ma'aikatan sabis na ƙwararru, kar a sake haɗawa ko gyara ko gyara samfurin
- Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
- Tabbatar cewa lodin waje bai wuce kimar tsarin aikin fitarwa ba.
- Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.
Yanayin Aiki
- Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.
| A'a | Abu | Ƙayyadaddun bayanai | Daidaitawa | ||||
| 1 | Nau'in yanayi | 0 ~ 55 ℃ | – | ||||
| 2 | Yanayin ajiya. | -25 ~ 70 ℃ | – | ||||
| 3 | Yanayin yanayi | 5 ~ 95% RH, mara sanyaya | – | ||||
| 4 | Yanayin ajiya | 5 ~ 95% RH, mara sanyaya | – | ||||
| 5 | Jijjiga Juriya |
Jijjiga lokaci-lokaci | – | – | |||
| Yawanci | Hanzarta | Saukewa: IEC61131-2 | |||||
| 5≤f<8.4㎐ | – | 3.5mm ku | Sau 10 a kowace hanya don X, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8 (1 g) | – | |||||
| Ci gaba da girgiza | |||||||
| Yawanci | Yawanci | Yawanci | |||||
| 5≤f<8.4㎐ | – | 1.75mm ku | |||||
| 8.4≤f≤150㎐ | 4.9 (0.5 g) | – | |||||
Software na Tallafi Mai Aiwatarwa
Don tsarin tsarin, sigar mai zuwa ya zama dole.
- XGI CPUV3.91 ko sama / XGI CPU(N) V1.10 ko sama
- XGK CPUV4.50 ko sama / XGK CPU(N) V1.00 ko sama
- XG5000 SoftwareV3.61 ko sama
Na'urorin haɗi da Ƙayyadaddun Kebul
Duba baturin da aka makala a cikin tsarin.
- An ƙaddara voltage/ na yanzu DC 3.0V/1,800mAh
- Lokacin garanti na shekara 5 (a 25 ℃, zazzabi na al'ada)
- Shirin Amfani/Ajiyayyen bayanai, tuki RTC lokacin da aka kashe RTC
- Ƙayyadaddun Manganese dioxide lithium (17.0 x 33.5 mm)
Sunan sassan da Girma (mm)
Wannan bangare ne na gaba na CPU. Koma zuwa kowane suna lokacin aiki da tsarin. Don ƙarin bayani, koma zuwa littafin jagorar mai amfani.
Shigarwa / Cire Modules
- Anan yayi bayanin hanyar da za a haɗa kowane module zuwa tushe ko cire shi.
Tsarin shigarwa
- Saka lever loading na ƙananan ɓangaren PLC cikin ƙayyadadden ramin ƙirar tushe.
- Zamar da ɓangaren sama na module don daidaitawa zuwa tushe, sa'an nan kuma daidaita shi zuwa tushe ta amfani da madaidaicin ƙirar ƙirar.
- Ja babban ɓangaren tsarin don bincika idan an shigar dashi zuwa tushe gaba ɗaya
Cire module
- Sake kafaffen sukurori na babban ɓangaren module daga tushe.
- Ta latsa ƙugiya, ja babban ɓangaren module daga axis na ƙananan ɓangaren module.
- Ta hanyar ɗaga ƙirar zuwa sama, cire lever na module daga ramin gyarawa.
Waya
Wutar lantarki
- Idan wutar ta fita daga ƙididdigewatage, haɗa m voltagda transformer
- Haɗa wutar lantarki tare da ƙaramar amo tsakanin igiyoyi ko tsakanin ƙasa. Idan ana samun surutu da yawa, haɗa taswirar mai warewa ko tace amo.
- Ya kamata a raba wutar lantarki don PLC, na'urar I/O da sauran injuna.
- Yi amfani da keɓewar ƙasa idan zai yiwu. Idan akwai aikin Duniya, yi amfani da duniya aji 3. (juriya ta duniya 100 Ω ko ƙasa da haka) kuma Yi amfani da kebul fiye da 2 mm2 don ƙasa.
Idan an sami aikin da ba daidai ba bisa ga ƙasa, raba PE na tushe daga ƙasa.
Garanti
- Lokacin garanti shine watanni 36 daga ranar da aka yi.
- Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
- Keɓancewa daga garanti
- Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
- Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
- Rashin gazawar abubuwan waje marasa alaƙa da samfurin
- Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
- Amfani da samfurin ta hanyoyin da ba a yi niyya ba
- Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
- Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
- Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
- Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
- Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.
Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com
- Imel: automation@ls-electric.com
- Headquarter/Ofishin Seoul
Lambar waya: 82-2-2034-4033,4888,4703 - Ofishin LS ELECTRIC Shanghai (China)
Lambar waya: 86-21-5237-9977 - LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Lambar waya: 86-510-6851-6666 - LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Lambar waya: 84-93-631-4099 - LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE)
Lambar waya: 971-4-886-5360 - LS ELECTRIC Turai BV (Hoofddorf, Netherlands)
Lambar waya: 31-20-654-1424 - LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Lambar waya: 81-3-6268-8241 - LS ELECTRIC America Inc. (Chicago, Amurka)
Waya: 1-800-891-2941 - Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Takardu / Albarkatu
 |
LS XGK-CPUUN Mai Gudanar da Dabarun Shirye-shiryen [pdf] Jagoran Shigarwa XGK-CPUUN, CPUHN, CPUSN, XGK-CPUU, CPUH, CPUA, CPUS, CPUE, XGI-CPUUN, CPUU, CPUH, CPUS, CPUE, XGK-CPUUN Mai sarrafa dabaru, XGK-CPUUN, Mai sarrafa dabaru, Mai sarrafa dabaru, Mai sarrafawa |
