I-LS XGK-CPUUN isiLawuli esiQinisekileyo esiQinisekayo

Ulwazi lweMveliso

Iinkcukacha:

• C/N: 10310000513
• imveliso: Programmable Logic Controller
• Iimodeli: XGK-CPUUN, XGK-CPUHN, XGK-CPUSN, XGT CPU, XGK-CPUU, XGK-CPUH, XGK-CPUA, XGK-CPUS, XGK-CPUE, XGI-CPUUN, XGI-CPUU, XGI-CPUH, XGI -CPUS, XGI-CPUE

Imiyalelo yokusetyenziswa kwemveliso

Ukuhlohla:

1. Qinisekisa unikezelo lwamandla olufanelekileyo kunye nokubekwa phantsi phambi kokufaka i-PLC.
2. Faka i-PLC ngokukhuselekileyo kwindawo efanelekileyo enomoya owaneleyo ukukhusela ukushisa.

Ubumbeko:

1. Qhagamshela izixhobo zegalelo kunye nemveliso kwiizibuko ezichongiweyo kwi-PLC ngokwedayagram yocingo.
2. Cwangcisa isoftware yenkqubo kwisixhobo esihambelanayo ukuqwalasela iPLC yesicelo sakho esithile.

Umsebenzi:

1. Amandla kwi-PLC kwaye ubeke iliso kwizikhombisi zesimo ukuqinisekisa ukusebenza ngokufanelekileyo.
2. Yenza ingqiqo ecwangcisiweyo ukulawula izixhobo ezidityanisiweyo ngokusekelwe kwiimpawu zongeniso.

Imibuzo Ebuzwa Rhoqo (FAQ)

• Umbuzo: Luluphi udidi olucetyiswayo lobushushu bokusebenza kule nto PLC?
  A: Uluhlu olucetyiswayo lobushushu bokusebenza luyi -25°C ukuya kuma-70°C.
• Umbuzo: Ngaba le PLC ingasetyenziswa kwiindawo zokufuma okuphezulu?
  A: Ewe, i-PLC yenzelwe ukusebenza kwindawo enokufikelela kwi-95% yokufuma.

Esi sikhokelo sofakelo sibonelela ngolwazi olulula lomsebenzi wolawulo lwe-PLC. Nceda ufunde ngononophelo olu xwebhu lwedatha kunye neencwadana ngaphambi kokusebenzisa iimveliso. Ngokukodwa funda amanyathelo okhuseleko emva koko uphathe iimveliso ngokufanelekileyo.

ImiGaqo yoKhuseleko

Intsingiselo yeleyibhile yesilumkiso kunye nesilumkiso

ISILUMKISO	ISILUMKISO sibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, inokubangela ukufa okanye ukwenzakala okumandundu
ISILUMKO	UKULUMKISA kubonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukwenzakala okuncinci okanye okuphakathi. Isenokusetyenziswa ukulumkisa ngokuchasene nezenzo ezingakhuselekanga

ISILUMKISO 

1. Musa ukuqhagamshelana neetheminali ngelixa umbane usetyenziswa.
2. Qinisekisa ukuba akukho micimbi yangaphandle.
3. Musa ukuyilawula ibhetri. (tshaja, qhaqha, ukubetha, mfutshane, ukuthambisa)

ISILUMKO 

1. Qiniseka ukuba ujonga umthamo olinganisiweyotage kunye nolungiselelo lwetheminali phambi kocingo
2. Xa ufaka iintambo, qinisa isikrufu sebhloko yeterminal ngoluhlu lwetorque echaziweyo
3. Musa ukufaka izinto ezinokutsha kwindawo ezingqongileyo
4. Musa ukusebenzisa i-PLC kwindawo yokungcangcazela ngokuthe ngqo
5. Ngaphandle kwabasebenzi benkonzo yeengcali, musa ukuqhawula okanye ukulungisa okanye ukuguqula imveliso
6. Sebenzisa i-PLC kwimeko-bume ehlangabezana neenkcukacha ngokubanzi eziqulethwe kule datha.
7. Qinisekisa ukuba umthwalo wangaphandle awudluli umlinganiselo wemodyuli yemveliso.
8. Xa ulahla i-PLC kunye nebhetri, yiphathe njengenkunkuma yamashishini.

Indawo yokusebenza

• Ukufakela, jonga le miqathango ingezantsi.

Hayi	Into	Inkcazo					Umgangatho
1	Ithuba elikwiNdawo.	0 ~ 55℃					–
2	Ubushushu bokugcina.	-25 ~ 70℃					–
3	Ukufuma kwendawo	I-5 ~ 95%RH, i-non-condensing					–
4	Ukugcinwa kokufuma	I-5 ~ 95%RH, i-non-condensing					–
5	Ukungcangcazela Ukuchasa	Ukungcangcazela ngamaxesha athile				–	–
		Ukuphindaphinda	Ukukhawulezisa				IEC 61131-2
		5≤f<8.4㎐	–		3.5mm	Amaxesha ali-10 kwicala ngalinye ku-X, Y, Z
		8.4≤f≤150㎐	9.8㎨(1g)		–
		Ukungcangcazela okuqhubekayo
		Ukuphindaphinda	Ukuphindaphinda	Ukuphindaphinda
		5≤f<8.4㎐	–	1.75mm
		8.4≤f≤150㎐	4.9㎨(0.5g)	–

Isoftware yenkxaso esebenzayo

Kubumbeko lwesixokelelwano, oluguqulelo lulandelayo luyimfuneko.

1. XGI CPUV3.91 okanye ngaphezulu / XGI CPU(N) V1.10 okanye ngaphezulu
2. XGK CPUV4.50 okanye ngaphezulu / XGK CPU(N) V1.00 okanye ngaphezulu
3. XG5000 SoftwareV3.61 okanye ngaphezulu

Izixhobo kunye neNgcaciso zeCable

Jonga ibhetri encanyathiselwe kwimodyuli.

1. Ikaliwe ivoltage/yangoku DC 3.0V/1,800mAh
2. Ixesha lewaranti5 unyaka (kwi-25 ℃, ubushushu obuqhelekileyo)
3. Inkqubo yokusetyenziswa / i-back-up yedatha, i-RTC iqhuba xa ukucima umbane we-RTC
4. Ubalulo lweManganese diokside lithium(17.0 X 33.5 mm)

Igama lendawo kunye nobungakanani (mm)

Le yinxalenye engaphambili ye-CPU. Jonga igama ngalinye xa usebenzisa inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Ukufakela / Ukususwa kweeModyuli

• Apha ichaza indlela yokuncamathisela imodyuli nganye kwisiseko okanye ukuyisusa.

Kuhlohlwa imodyuli

1. Faka i-lever yokulayisha yenxalenye esezantsi ye-PLC kwimodyuli esisigxina yomngxuma wesiseko.
2. Slayida indawo ephezulu yemodyuli ukulungisa kwisiseko, kwaye emva koko uyifake kwisiseko ngokusebenzisa isikrufu sokulungisa imodyuli.
3. Tsala indawo ephezulu yemodyuli ukujonga ukuba ifakwe kwisiseko ngokupheleleyo

Ukususa imodyuli

1. Khulula izikrufu ezisisigxina zenxalenye ephezulu yemodyuli ukusuka kwisiseko.
2. Ngokucinezela i-hook, tsala indawo ephezulu yemodyuli ukusuka kwi-axis yendawo esezantsi yemodyuli.
3. Ngokuphakamisa imodyuli ukuya phezulu, susa i-lever yokulayisha imodyuli ukusuka kumngxunya wokulungisa.

Iintambo

Iingcingo zombane

1. Kwimeko apho amandla aphelile voltage, qhagamshela voltage transformer
2. Qhagamshela amandla anengxolo encinci phakathi kweentambo okanye phakathi komhlaba. Kwimeko yengxolo eninzi, qhagamshela isiguquli sokwahlula okanye isihluzi sengxolo.
3. Amandla ePLC, isixhobo se-I/O kunye nabanye oomatshini kufuneka bahlulwe.
4. Sebenzisa umhlaba ozinikeleyo ukuba kunokwenzeka. Kwimeko yemisebenzi yoMhlaba, sebenzisa umhlaba odidi olu-3. (ukuxhathisa umhlaba 100 Ω okanye ngaphantsi) kwaye Sebenzisa ngaphezu kwe-2 mm2 intambo yomhlaba.
   Ukuba umsebenzi ongaqhelekanga ufunyenwe ngokomhlaba, yahlula i-PE yesiseko ukusuka emhlabeni.

Iwaranti

• Ixesha lewaranti ziinyanga ezingama-36 ukusuka kumhla wokwenziwa.
• Ukuxilongwa kokuqala kweempazamo kufuneka kuqhutywe ngumsebenzisi. Nangona kunjalo, ngesicelo, i-LS ELECTRIC okanye abameli bayo banokuwenza lo msebenzi ngentlawulo. Ukuba unobangela wesiphoso ufunyaniswa uxanduva lwe-LS ELECTRIC, le nkonzo iya kuba simahla.
• Ukukhutshwa kwiwaranti
  1. Ukutshintshwa kwezinto ezisetyenziswayo nezinobomi kuphela (umz. iireyiyidi, iifuse, iicapacitor, iibhetri, iiLCDs, njl.njl.)
  2. Ukusilela okanye umonakalo obangelwe ziimeko ezingafanelekanga okanye ukuphatha ngaphandle kwezo zichazwe kwincwadana yomsebenzisi
  3. Ukungaphumeleli okubangelwa yimiba yangaphandle engahambelani nemveliso
  4. Ukusilela okubangelwa luhlengahlengiso ngaphandle kwemvume ye-LS ELECTRIC
  5. Ukusetyenziswa kwemveliso ngeendlela ebezingalindelekanga
  6. Ukusilela okungenakuxelwa kwangaphambili/ukusonjululwa bubuchwephesha bezenzululwazi bangoku ngexesha lokwenziwa
  7. Ukusilela ngenxa yezinto zangaphandle ezifana nomlilo, umthamo ongaqhelekangatage, okanye iintlekele zendalo
  8. Ezinye iimeko apho i-LS ELECTRIC ayinaxanduva
• Ngolwazi oluneenkcukacha lwewaranti, nceda ujonge kwincwadana yomsebenzisi.
• Umxholo wesikhokelo sokufakela unokutshintsha ngaphandle kwesaziso sokuphucula ukusebenza kwemveliso.

I-LS ELECTRIC Co., Ltd. www.ls-electric.com

• I-imeyile: automation@ls-electric.com
• Ikomkhulu/iOfisi yaseSeoul
  Umnxeba: 82-2-2034-4033,4888,4703
• LS ELECTRIC IOfisi yaseShanghai (eTshayina)
  Umnxeba: 86-21-5237-9977
• I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
  Umnxeba: 86-510-6851-6666
• I-LS-ELECTRIC Vietnam Co., Ltd. (eHanoi, eVietnam)
  Umnxeba: 84-93-631-4099
• I-LS ELECTRIC Middle East FZE (Dubai, UAE)
  Umnxeba: 971-4-886-5360
• LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
  Umnxeba: 31-20-654-1424
• I-LS ELECTRIC Japan Co., Ltd. (eTokyo, eJapan)
  Umnxeba: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, USA)
  Ifowuni: 1-800-891-2941
• Umzi-mveliso: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea

Amaxwebhu / Izibonelelo

I-LS XGK-CPUUN isiLawuli esiQinisekileyo esiQinisekayo [pdf] Isikhokelo soFakelo XGK-CPUUN, CPUHN, CPUSN, XGK-CPUU, CPUH, CPUA, CPUS, CPUE, XGI-CPUUN, CPUU, CPUH, CPUS, CPUE, XGK-CPUUN Programmable Logic Controller, XGK-CPUUN, Programmable Logic Controller, Logic Controller, Umlawuli

Iimbekiselo

• Incwadi yokusebenzisa