Litaba
pata
LS XGK-CPUUN Selaoli sa Monahano se Hlophisitsoeng
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- C/N: 10310000513
- Sehlahisoa: Programmable Logic Controller
- Mehlala: XGK-CPUUN, XGK-CPUHN, XGK-CPUSN, XGT CPU, XGK-CPUU, XGK-CPUH, XGK-CPUA, XGK-CPUS, XGK-CPUE, XGI-CPUUN, XGI-CPUU, XGI-CPUH, XGI -CPUS, XGI-CPUE
Litaelo tsa Tšebeliso ea Sehlahisoa
Kemiso:
- Netefatsa phepelo e nepahetseng ea motlakase le ho theoa pele o kenya PLC.
- Beha PLC ka mokhoa o sireletsehileng sebakeng se loketseng se nang le moea o lekaneng ho thibela mocheso o feteletseng.
Tlhophiso:
- Hokela lisebelisoa tsa ho kenya le ho tsoa likoung tse khethiloeng ho PLC ho latela setšoantšo sa wiring.
- Hlophisa software ea lenaneo ho sesebelisoa se lumellanang ho lokisa PLC bakeng sa ts'ebeliso ea hau e khethehileng.
Ts'ebetso:
- Matla ho PLC le ho beha leihlo matšoao a boemo ho netefatsa ts'ebetso e nepahetseng.
- Etsa moralo o hlophisitsoeng ho laola lisebelisoa tse hokahaneng ho latela matšoao a kentsoeng.
Lipotso tse atisang ho botsoa (FAQ)
- P: Ke mocheso ofe o khothalletsoang oa ho sebetsa bakeng sa see PLC?
A: Mocheso o khothaletsoang oa ho sebetsa ke -25°C ho isa ho 70°C. - P: Na PLC ee e ka sebelisoa libakeng tse nang le mongobo o phahameng?
K: E, PLC e etselitsoe ho sebetsa libakeng tse nang le mongobo o fihlang ho 95%.
Tataiso ena ea ho kenya e fana ka tlhaiso-leseling e bonolo ea ts'ebetso ea taolo ea PLC. Ka kopo bala ka hloko leqephe lena la data le libuka pele u sebelisa lihlahisoa. Haholo-holo bala mehato ea tšireletso ebe u tšoara lihlahisoa hantle.
Litlhokomelo tsa Tšireletso
Moelelo oa lengolo la tlhokomeliso le tlhokomeliso
 TLHOKOMELO |
TEMOSO e supa boemo bo ka bang kotsi, boo haeba bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe |
| TLHOKOMELO |
TLHOKOMELO e supa boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang |
TLHOKOMELO
- Se ke oa ikopanya le lits'oants'o ha motlakase o sebelisoa.
- Etsa bonnete ba hore ha ho na litaba tsa kantle ho naha.
- Se ke oa fetola betri. (tefisa, qhaqholla, otla, kgutshwane, solder)
TLHOKOMELO
- Etsa bonnete ba hore u sheba rated voltage le tlhophiso ea terminal pele ho terata
- Ha o kenya lithapo, tiisa screw ea "terminal block" ka mefuta e boletsoeng ea torque
- Se ke oa kenya lintho tse tukang linthong tse tikolohong
- Se ke oa sebelisa PLC tikolohong ea ho thothomela ka kotloloho
- Ntle le basebeletsi ba litšebeletso tsa litsebi, u se ke ua qhaqha kapa ua lokisa kapa ua fetola sehlahisoa
- Sebelisa PLC tikolohong e kopanang le lintlha tse akaretsang tse fuperoeng ke database ena.
- Etsa bonnete ba hore mojaro o kantle ha o fete tekanyetso ea module ea tlhahiso.
- Ha u lahla PLC le betri, e tšoare joalo ka litšila tsa indasteri.
Tikoloho ya Tshebetso
- Ho kenya, hlokomela maemo a ka tlase.
| Che | Ntho | Tlhaloso | Standard | ||||
| 1 | Mocheso oa tikoloho. | 0 ~ 55℃ | – | ||||
| 2 | Mocheso oa polokelo. | -25 ~ 70 ℃ | – | ||||
| 3 | Mongobo wa tikoloho | 5 ~ 95%RH, e sa fokotseng | – | ||||
| 4 | Mongobo wa polokelo | 5 ~ 95%RH, e sa fokotseng | – | ||||
| 5 | Ho thothomela Khanyetso |
Ho thothomela nako le nako | – | – | |||
| Khafetsa | Ho potlakisa | Tlhaloso: IEC 61131-2 | |||||
| 5≤f<8.4㎐ | – | 3.5 limilimithara | Makhetlo a 10 ntlheng ka 'ngoe bakeng sa X, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ho thothomela ho sa feleng | |||||||
| Khafetsa | Khafetsa | Khafetsa | |||||
| 5≤f<8.4㎐ | – | 1.75 limilimithara | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Sebetsa Tšehetso Software
Bakeng sa tlhophiso ea sistimi, mofuta o latelang oa hlokahala.
- XGI CPUV3.91 kapa ka holimo / XGI CPU(N) V1.10 kapa ka holimo
- XGK CPUV4.50 kapa ka holimo / XGK CPU(N) V1.00 kapa ka holimo
- XG5000 SoftwareV3.61 kapa ka holimo
Lisebelisoa le Litlhaloso tsa Cable
Sheba betri e kenyellelitsoeng mojuleng.
- E lekantsoeng voltage/hajoale DC 3.0V/1,800mAh
- Tiisetso nako ea lilemo tse 5 (ho 25 ℃, mocheso o tloaelehileng)
- Lenaneo la Ts'ebeliso / Backup ea data, ho khanna ha RTC ha RTC e tima
- Tlhaloso ea Manganese dioxide lithium(17.0 X 33.5 mm)
Lebitso la likarolo le boholo (mm)
Ena ke karolo e ka pele ea CPU. Sheba lebitso le leng le le leng ha o sebelisa sistimi. Ho fumana lintlha tse ling, sheba bukana ea mosebelisi.
Ho kenya / ho tlosa li-module
- Mona ho hlalosa mokhoa oa ho hokela module ka 'ngoe setsing kapa ho e tlosa.
Ho kenya module
- Kenya lever ea ho kenya ea karolo e tlase ea PLC ka har'a lesoba le tsitsitseng la module ea setsi.
- Tsamaisa karolo e ka holimo ea mojule ho lokisa botlaaseng, 'me ue lokele botlaaseng ka ho sebelisa screw fixing module.
- Hula karolo e ka holimo ea mojule ho bona hore na e kentsoe setsing ka botlalo
Ho tlosa mojule
- Lokolla li-screws tse tsitsitseng tsa karolo e ka holimo ea mojule ho tloha setsing.
- Ka ho tobetsa hook, hula karolo e ka holimo ea mojule ho tloha axis ea karolo e ka tlase ea module.
- Ka ho phahamisetsa mojule holimo, tlosa lever ea mojule ho tloha ka lesoba la ho lokisa.
Wiring
Wiring ea matla
- Haeba matla a tsoa ho rated voltage, amahanya kamehla voltagle transformer
- Hokela matla a nang le lerata le lenyane lipakeng tsa likhoele kapa lipakeng tsa mafatše. Haeba ho na le lerata le lengata, hokela sefetoleli se ikhethileng kapa sefe ea lerata.
- Matla a PLC, sesebelisoa sa I/O le mechini e meng e lokela ho aroloa.
- Sebelisa lefatše le inehetseng haeba ho khoneha. Tabeng ea mesebetsi ea Lefatše, sebelisa lefatše la sehlopha sa 3. (khanyetso ea lefatše 100 Ω kapa ka tlase) le Sebelisa thapo e fetang 2 mm2 bakeng sa lefatše.
Haeba ts'ebetso e sa tloaelehang e fumanoa ho ea ka lefats'e, arola PE ea setsi ho tloha lefats'eng.
Tiisetso
- Nako ea tiisetso ke likhoeli tse 36 ho tloha ka letsatsi la tlhahiso.
- Tlhahlobo ea pele ea liphoso e lokela ho etsoa ke mosebelisi. Leha ho le joalo, ka kopo, LS ELECTRIC kapa baemeli ba eona ba ka etsa mosebetsi ona ka tefiso. Haeba sesosa sa phoso se fumanoa e le boikarabelo ba LS ELECTRIC, tšebeletso ena e tla ba ntle ho tefo.
- Mekhahlelo ho tsoa ho tiisetso
- Ho nkela sebaka sa likarolo tse ka sebelisoang le tse lekanyelitsoeng tsa bophelo (mohlala, li-relay, fuse, capacitor, libeteri, li-LCD, joalo-joalo)
- Ho hloleha kapa tshenyo e bakilweng ke maemo a sa lokang kapa ho tshwara ka ntle ho tse boletsweng bukeng ya mosebedisi
- Ho hloleha ho bakoang ke mabaka a kantle a sa amaneng le sehlahiswa
- Ho hloleha ho bakoang ke liphetoho ntle le tumello ea LS ELECTRIC
- Tšebeliso ea sehlahisoa ka mekhoa e sa lebelloang
- Ho hlōleha ho ke keng ha boleloa esale pele / rarolloa ke theknoloji ea morao-rao ea saense nakong ea tlhahiso
- Ho hloleha ka lebaka la mabaka a kantle joalo ka mollo, matla a sa tloaelehangtage, kapa likoluoa tsa tlhaho
- Linyeoe tse ling tseo LS ELECTRIC e sa ikarabelleng ho tsona
- Bakeng sa tlhaiso-leseling e batsi ka tiisetso, ka kopo sheba bukana ea mosebelisi.
- Likahare tsa tataiso ea ho instola li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea ts'ebetso ea sehlahisoa.
LS ELECTRIC Co., Ltd. www.ls-electric.com
- E-mail: automation@ls-electric.com
- Ntlo-khōlō / Ofisi ea Seoul
Mohala: 82-2-2034-4033,4888,4703 - LS ELECTRIC Ofisi ea Shanghai (Chaena)
Mohala: 86-21-5237-9977 - LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Mohala: 86-510-6851-6666 - LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Mohala: 84-93-631-4099 - LS ELECTRIC Middle East FZE (Dubai, UAE)
Mohala: 971-4-886-5360 - LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
Mohala: 31-20-654-1424 - LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Mohala: 81-3-6268-8241 - LS ELECTRIC America Inc. (Chicago, USA)
Mohala: 1-800-891-2941 - Fektheri: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Litokomane / Lisebelisoa
 |
LS XGK-CPUUN Selaoli sa Monahano se Hlophisitsoeng [pdf] Tlhophiso Tataiso XGK-CPUUN, CPUHN, CPUSN, XGK-CPUU, CPUH, CPUA, CPUS, CPUE, XGI-CPUUN, CPUU, CPUH, CPUS, CPUE, XGK-CPUUN Programmable Logic Controller, XGK-CPUUN, Programmable Logic Controller, Logic Controller, Controller |
