STEPPERONLINE EV200 Series Ayipada Igbohunsafẹfẹ wakọ olumulo Afowoyi

Itọsọna olumulo fun
EV200 jara Ayípadà Igbohunsafẹfẹ wakọ

Awọn akoonu tọju

1 Ti o tobi ju

2 Standard Wiring aworan atọka

3 Awọn pato imọ-ẹrọ

4 Funcon paramita Table

5 Abojuto Parameters

6 Ifihan aṣiṣe

7 Awọn iwe aṣẹ / Awọn orisun

7.1 Awọn itọkasi

8 jẹmọ Posts

Ti o tobi ju

Voltage	Iru awoṣe	Agbara (kW)	Iwọn fifi sori ẹrọ (mm)		ju (mm)			Iho fi sori ẹrọ
			A	B	W	H	D
Nikan alakoso 220V	EV200-0400G-S2	0	60	129	73	143	112	Ф4.4
	EV200-0750G-S2	0
	EV200-1500G-S2	1
	EV200-2200G-S2	2
Ipele mẹta 380V	EV200-0750G-T3	0
	EV200-1500G-T3	1
	EV200-2200G-T3	2
	EV200-3700G-T3	3	73	168	85	180	116	Ф4.4
	EV200-5500G-T3	5

Standard Wiring aworan atọka

Awọn itọnisọna onirin

Aami ebute	Apejuwe iṣẹ
E	Ebute ilẹ
L1,L3	Sopọ si agbara akoj nikan-alakoso (220Vac) AC ipese agbara
L1,L2,L3	Ti sopọ si akoj mẹta-alakoso (380Vac) AC ipese agbara
U,V,W	So a mẹta-alakoso AC motor
B1	Filter kapasito DC ẹgbẹ voltage rere ebute
B2	Atako braking DC le sopọ taara si B1

Awọn pato imọ-ẹrọ

Nkan	Sipesifikesonu
Igbohunsafẹfẹ ti o ga julọ	Iṣakoso fekito: 0～500Hz; V/F iṣakoso: 0 ~ 500Hz
Igbohunsafẹfẹ ti ngbe	0.8kHz ~ 12kHz Igbohunsafẹfẹ ti ngbe le ṣe atunṣe laifọwọyi ni ibamu si awọn abuda iwọn otutu
Ipinnu igbohunsafẹfẹ igbewọle	Eto oni nọmba: Eto afọwọṣe 0.01Hz: igbohunsafẹfẹ ti o pọju × 0.025%
Iṣakoso mode	laisi PG Vector (SVC), fekito esi (FVC) ati iṣakoso V/F
Bẹrẹ iyipo	Iru G: 0.5Hz/150% (SVC);0Hz/180%(FVC) Iru P: 0.5Hz/100%
Iwọn iyara	1:100 (SVC)	1:1000 (FVC)
Iyara Iṣakoso išedede	± 0.5% (SVC)	± 0.02% (FVC)
Torque Iṣakoso išedede	± 5% (FVC)
Apọju agbara	Iru G: 150% ti o wa lọwọlọwọ 60sec; 180% ti won won lọwọlọwọ 3sec

Funcon paramita Table

Nigbati PP-00 ti ṣeto bi iye ti kii ṣe odo, iyẹn ni, ọrọ igbaniwọle protecon paramita ti ṣeto. Ninu paramita funcon ati olumulo yi ipo paramita pada, akojọ aṣayan paramita gbọdọ tẹ ọrọ igbaniwọle sii ni deede. O le fagilee funcon protecon ọrọ igbaniwọle nipasẹ Seng PP-00 bi 0.
Akojọ paramita ni ipo paramita asọye olumulo kii ṣe aabo ọrọ igbaniwọle.
Ẹgbẹ P ati A pẹlu awọn paramita funcon ipilẹ, ẹgbẹ d pẹlu awọn paramita funcon ibojuwo. Awọn aami ninu tabili koodu funcon jẹ apejuwe bi atẹle:
“☆”: o ṣee ṣe lati yipada paramita nigbati awakọ ni iduro tabi ni ipo ṣiṣe;
“★”: ko ṣee ṣe;
“●”:paramita naa jẹ iye idiwọn gangan ati pe ko le ṣe atunṣe.
“*”: paramita naa jẹ “paramita ile-iṣẹ”, o le ṣeto nipasẹ olupese nikan, ṣe idiwọ olumulo lati ṣiṣẹ.

Iṣẹ-ṣiṣe Code	Oruko	Eto Ibiti	Aiyipada	Ṣatunṣe
Ẹgbẹ P0: Ipilẹ iṣẹ
P0-01	Motor 1 Iṣakoso mode	0: Ko si iṣakoso fekito sensọ iyara (SVC) 1: Iṣakoso iyara sensọ iyara (FVC) 2: iṣakoso V/F	2	★
P0-02	Aṣayan orisun pipaṣẹ	0: Isẹ nronu ilana ikanni 1: ebute ikanni pipaṣẹ 2: ibaraẹnisọrọ ikanni	0	☆
P0-03	Eto itọkasi igbohunsafẹfẹ akọkọ Aṣayan ikanni kan	0: Eto oni nọmba (igbohunsafẹfẹ tito tẹlẹ P0-08, UP/DOWN le ṣe atunṣe, agbara kii ṣe iranti) 1: Eto oni nọmba (igbohunsafẹfẹ tito tẹlẹ P0-08, UP/down le ṣe atunṣe, iranti agbara-isalẹ 2: AI1 (Akiyesi) : J4 jumper ni PANEL ati AI1 ti a ti sopọ si titẹ sii potentiometer keyboard, PORT ati AI1 ti a ti sopọ si ebute ita AI1 igbewọle) 3: Ai2 4: Ai3 5: Gbigbe titẹ pulse ti o ga julọ (S5) 6: awọn itọnisọna pupọ-apakan 7: Simple PLC 8: PID 9: ibaraẹnisọrọ ti a fun 10: Ni ipamọ	2	★
P0-04	Ayanfẹ ipo igbohunsafẹfẹ orisun B pipaṣẹ input aṣayan	Pẹlu P0-03 (orisun igbohunsafẹfẹ akọkọ Aṣayan titẹ sii itọnisọna)	0	★
P0-05	Auxiliay igbohunsafẹfẹ orisun B Reference ohun yiyan	0: ibatan si igbohunsafẹfẹ ti o pọju 1: ibatan si orisun igbohunsafẹfẹ A	0	☆
P0-06	Iranlọwọ igbohunsafẹfẹ orisun B pipaṣẹ ibiti	0% ~ 150%	100%	☆
P0-07	Aṣayan ipo apapọ orisun igbohunsafẹfẹ	Bit: aṣayan orisun igbohunsafẹfẹ 0: Orisun igbohunsafẹfẹ akọkọ A 1: akọkọ ati awọn abajade iṣẹ ṣiṣe iranlọwọ (ibasepo iṣẹ ṣiṣe ti a pinnu nipasẹ mẹwa) 2: Orisun igbohunsafẹfẹ akọkọ A ati orisun igbohunsafẹfẹ iranlọwọ B yipada 3: Orisun igbohunsafẹfẹ akọkọ A ati oluwa ati abajade iṣẹ ẹrú yipada 4: orisun igbohunsafẹfẹ oluranlọwọ B ati oluwa ati abajade iṣẹ ẹrú yipada mẹwa: orisun igbohunsafẹfẹ akọkọ ati ibatan iṣiṣẹ iranlọwọ 0: akọkọ + oluranlowo 1: akọkọ - oluranlowo 2: o pọju meji 3: awọn meji ti o kere julọ	00	☆
P0-08	Igbohunsafẹfẹ tito tẹlẹ	0.00Hz ~ max (P0-10) igbohunsafẹfẹ	50.00Hz	☆
P0-09	Nṣiṣẹ itọsọna	0: kanna itọsọna 1: idakeji	0	☆
P0-10	Max.o wu igbohunsafẹfẹ	50.00Hz ~ 500.00Hz	50.00Hz	★
P0-11	Eto ikanni ti igbohunsafẹfẹ oke iye	0: P0-12 ti ṣeto 1:AI1(Akiyesi:J6jump) 2: AI2 3: AI3 4: Eto pulse iyara to gaju (S5) 5: ibaraẹnisọrọ fun	0	★
P0-12	Igbohunsafẹfẹ itọkasi oke iye	Oke iye P0-10 P0-14 ~ max igbohunsafẹfẹ	50.00Hz	☆
P0-13	Itọkasi igbohunsafẹfẹ oke ni opin	0.00Hz ~ igbohunsafẹfẹ ti o pọju. P0-10	0.00Hz	☆
P0-14	Igbohunsafẹfẹ Reference kekere iye to	0.00Hz ~ Igbohunsafẹfẹ oke ni opin P0-12	0.00Hz	☆
P0-15	Igbohunsafẹfẹ ti ngbe	0.8KHz ~ 12.0KHz	Awoṣe ti o gbẹkẹle	☆
P0-16	Igbohunsafẹfẹ ti ngbe ni titunse pẹlu iwọn otutu	0: Alaabo 1: Ti ṣiṣẹ	1	☆
P0-17	Akoko isare 1	Awọn 0.00 ~ ~ 65000s	Awoṣe ti o gbẹkẹle	☆
P0-18	Akoko idinku 1	Awọn 0.00 ~ ~ 65000s	Awoṣe ti o gbẹkẹle	☆
P0-19	Isare / Deceleration akoko kuro	0: 1s 1: 0.1s 2: 0.01s	1	★
P0-21	Igbohunsafẹfẹ ti ikanni eto igbohunsafẹfẹ oluranlọwọ fun akọkọ ati iṣiro oluranlọwọ	0.00Hz ~ max.frequency P0-10	0.00Hz	☆
P0-22	Iwọn itọkasi igbohunsafẹfẹ	2: 0.01Hz	2	★
P0-23	Idaduro igbohunsafẹfẹ eto oni-nọmba lori iduro	0: ma ranti 1: iranti	1	☆
P0-24	Motor paramita Ẹgbẹ aṣayan	0: paramita 1st motor 1: paramita mọto 2	0	★
P0-25	Imuyara / Ilọkuro akoko ipilẹ igbohunsafẹfẹ	0: o pọju (P0-10) 1: Ṣeto igbohunsafẹfẹ 2: 100Hz igbohunsafẹfẹ	0	★
P0-26	Igbohunsafẹfẹ ipilẹ fun iyipada UP / DOW lakoko ṣiṣe	0: Ṣiṣe igbohunsafẹfẹ 1: Ṣeto igbohunsafẹfẹ	0	★
P0-27	Aṣẹ ṣiṣe naa ti so si orisun igbohunsafẹfẹ akọkọ Aṣayan pipaṣẹ	Bit: Isẹ nronu pipaṣẹ Din igbohunsafẹfẹ orisun yiyan 0: ko si abuda 1: Digital eto igbohunsafẹfẹ 2: AI1 (Akiyesi: J6 jumper) 3: AI2 4: AI3 5: Ga-iyara pulse igbewọle eto (S5) 6: olona-iyara 7 PLC ti o rọrun 8: PID 9: ibaraẹnisọrọ ti a fun ni mẹwa: Terminal Command Binding Igbohunsafẹfẹ Orisun Aṣayan Awọn ọgọọgọrun: pipaṣẹ ibaraẹnisọrọ abuda orisun igbohunsafẹfẹ aṣayan.	0	☆
P0-28	Ilana ibaraẹnisọrọ ibudo ni tẹlentẹle	0: Modbus ibaraẹnisọrọ	0	☆
P1 Ẹgbẹ: Motor 1 paramita
P1-00	Motor iru yiyan	0: arinrin asynchronous motor 1: Ayípadà igbohunsafẹfẹ motor asynchronous	0	★
P1-01	Ti won won motor agbara	0.1KW ~ 1000.0KW	Awoṣe ti o gbẹkẹle	★
P1-02	Won won motor voltage	1V~2000V	Awoṣe ti o gbẹkẹle	★
P1-03	Ti won won motor lọwọlọwọ	0.01 si 655.35A (agbara AC wakọ ≤ 55 KW) 0.1 si 6553.5A (agbara AC wakọ> 55 KW)	Awoṣe ti o gbẹkẹle	★
P1-04	Ti won won motor igbohunsafẹfẹ	0.01Hz ~ o pọju. igbohunsafẹfẹ	Awoṣe ti o gbẹkẹle	★
P1-05	Ti won won motor iyara	1rpm ~ 65535rpm	Awoṣe ti o gbẹkẹle	★
P1-06	Stator resistance	0.001Ω ~ 65.535Ω(AC wakọ agbara≤55KW) 0.0001Ω~6.5535Ω(AC wakọ agbara>55KW)	Aifọwọyi-yiyi ti o gbẹkẹle	★

P1-07	Rotor resistance	0.001Ω ~ 65.535Ω(AC wakọ agbara≤55KW) 0.0001Ω~6.5535Ω(AC wakọ agbara>55KW)	Aifọwọyi-yiyi ti o gbẹkẹle	★
P1-08	Njo inductive reactance	0.01mH ~ 655.35mH(AC wakọ agbara≤55KW) 0.001mH ~ 65.535mH (Agbara wakọ AC>55KW)	Aifọwọyi-yiyi ti o gbẹkẹle	★
P1-09	Ifaseyin inductive pelu owo	0.1mH ~ 6553.5mH(AC wakọ agbara≤55KW) 0.01mH ~ 655.35mH(AC wakọ agbara>55KW)	Aifọwọyi-yiyi ti o gbẹkẹle	★
P1-10	Ko si fifuye lọwọlọwọ	0.01A ~ P1-03(AC wakọ agbara≤55KW) 0.1A ~ P1-03(AC drive agbara>55KW) 0.1A ~ P1-03(AC drive agbara>55KW)	Aifọwọyi-yiyi ti o gbẹkẹle	★
P1-27	Encoder polusi fun Iyika	1~65535	1024	★
P1-28	kooduopo iru	0: ABZ kooduopo afikun 2: Resolver	0	★
P1-30	A/B ipele ọkọọkan ti ABZ kooduopo afikun	0: Siwaju 1: Ifipamọ	0	★
P1-34	Nọmba ti polu orisii ti resolver	1~65535	1	★
P1-36	Encoder wire-break asise akoko iwari	0.0: ko si isẹ 0.1s ~ 10.0s	0.0s	★
P1-37	Motor auto-yiyi ọna yiyan	0: ko si iṣẹ 1: Asynchronous ẹrọ aimi apakan ti awọn aye ti ẹkọ ti ara ẹni 2: ẹrọ asynchronous dynamic pipe ara-ẹkọ 3: ẹrọ asynchronous aimi pipe ikẹkọ ti ara ẹni	0	★
Ẹgbẹ P2: Awọn paramita Iṣakoso Vector
P2-00	Ere iwon yipo iyara 1	1~100	30	☆
P2-01	Iyara loop akoko 1	Awọn 0.01 ~ ~ 10.00s	0.50s	☆
P2-02	Igbohunsafẹfẹ iyipada 1	0.00 ~ P2-05	5.00Hz	☆
P2-03	Ere iwon yipo iyara 2	1~100	20	☆
P2-04	Iyara loop akoko 2	Awọn 0.01 ~ ~ 10.00s	1.01.00s0s	☆
P2-05	Igbohunsafẹfẹ iyipada 2	P2-02~Igbohunsafẹfẹ ti o pọju (P0-10)	10.00Hz	☆
P2-06	SVC/FVC isokuso biinu ere	50% ~ 200%	100%	☆
P2-07	SVC Iyara esi àlẹmọ akoko ibakan	Awọn 0.000 ~ ~ 0.100s	0.015s	☆
P2-09	Yiyan ikanni pipaṣẹ oke torque labẹ iṣakoso iyara	0: koodu iṣẹ P2-10 eto 1: AI1 2: AI2 3: AI3 4: Eto titẹ pulse iyara to gaju (S5) 5: ibaraẹnisọrọ ti a fun ni 6: MIN (AI1, AI2) 7: MAX (AI1, AI2) 1-7 aṣayan kikun iwọn ni ibamu si P2-10	0	☆
P2-10	Eto oni nọmba ti iyipo iyipo ni iṣakoso iyara	0.0% ~ 200.0%	150.0%	☆
P2-11	Orisun opin Torque ni iṣakoso iyara (ni ipo isọdọtun)	0: Eto koodu iṣẹ P2-12 (ko si iyatọ laarin ina ati iran agbara) 1: AI1 2: AI2 3: AI3 4: Eto titẹ titẹ pulse iyara-giga 5: ibaraẹnisọrọ ti a fun 6: MIN (AI1, Ai2) 7: MAX ( AI1, AI2) 8: koodu iṣẹ P2-12 eto 1-7 Iwọn kikun ti aṣayan ni ibamu si P2-12	0	☆
P2-12	Eto oni nọmba ti iwọn iyipo ni iṣakoso iyara (ni ipo isọdọtun)	0.0% ~ 200.0%	150.0%	☆
P2-13	Simi tolesese iwon ere	0~60000	2000	☆
P2-14	Simi tolesese je ere	0~60000	1300	☆
P2-15	Torque tolesese iwon ere	0~60000	2000	☆
P2-16	Torque tolesese je ere	0~60000	1300	☆
P2-17	Iyara lupu je yiyan iyapa	0: Alaabo 1: Ti ṣiṣẹ	0	☆
P2-20	Iwọn ti o pọju Maxtage	–	–	–
P2-21	O pọju. torque olùsọdipúpọ ti aaye weakening agbegbe	50 ~ 200%	100%	☆
P2-22	Aṣayan iwọn agbara isọdọtun	0: Alaabo 1: Ṣiṣẹ	0	☆
P2-23	Iwọn agbara isọdọtun	0 ~ 200%	Awoṣe ti o gbẹkẹle	☆
Ẹgbẹ P3: Awọn paramita Iṣakoso V/F
P3-00	V/F ti tẹ eto	0: Laini taara V/F 1: multipoint V/F 2: square V/F 3: 1.2 Agbara V/F 4: 1.4 Agbara V/F 6: 1.6 Agbara V/F 8: 1.8 agbara V/F 9: Ni ipamọ 10: VF pipe Iyapa mode 11: VF ologbele-ipinya mode	0	★
P3-01	Igbega iyipo	0.0%: (Lailokun) 0.1% ~ 30.0%	Awoṣe ti o gbẹkẹle
P3-02	Igbohunsafẹfẹ gige-pipa ti igbelaruge iyipo	0.00Hz ~ o pọju. igbohunsafẹfẹ	50.00Hz	★
P3-03	Olona-ojuami V/F igbohunsafẹfẹ1	0.00Hz ~ P3-05	0.00Hz	★
P3-04	Olona-ojuami V/F voltage 1	0.0% ~ 100.0%	0.0%	★
P3-05	Igbohunsafẹfẹ aaye-pupọ V/F 2	P3-03 ~ P3-07	0.00Hz	★
P3-06	Olona-ojuami V/F voltage 2	0.0% ~ 100.0%	0.0%	★
P3-07	Igbohunsafẹfẹ aaye-pupọ V/F 3	P3-05~Iwọn igbohunsafẹfẹ mọto (P1-04)	0.00Hz	★
P3-08	Olona-ojuami V/F voltage 3	0.0% ~ 100.0%	0.0%	★
P3-09	Isokuso biinu ere	–	–	–
P3-10	V/F lori-simi ere	0~200	64	☆
P3-11	V/F oscillation bomole ere	0~100	40	☆
P3-13	Voltage orisun fun V / F Iyapa	0: Eto oni-nọmba (P3-14) 1: AI1 (Akiyesi: J6 jumper) 2: AI2 3: AI3 4: Eto titẹ titẹ pulse ti o ga julọ (S5) 5: awọn itọnisọna pupọ-pupọ 6: Simple PLC 7: PID 8: ibaraẹnisọrọ ti a fun Akọsilẹ: 100.0% ni ibamu si motor won won voltage	0	☆
P3-14	Eto oni-nọmba ti voltage fun V / F Iyapa	0V ~ moto ti won won voltage	0V	☆
P3-15	Voltage dide akoko ti V / F Iyapa	Awọn 0.0 ~ ~ 1000.0s Akiyesi: 0V to won won motor voltage	0.0s	☆
P3-16	Voltage sile akoko ti V / F Iyapa	Awọn 0.0 ~ ~ 1000.0s Akiyesi: akoko ti 0V si ti won won motor voltage	0.0s	☆
P3-17	Aṣayan ipo iduro fun iyapa V/F	0: Igbohunsafẹfẹ ati voltage dinku si 0 ni ominira 1: Igbohunsafẹfẹ dinku lẹhin voltage dinku si 0	0	☆
P3-18	Iwọn opin lọwọlọwọ	50 ~ 200%	150%	★
P3-19	Aṣayan iye to lọwọlọwọ	0: asan 1: wulo	1	★
P3-20	Ere iye to lọwọlọwọ	0~100	20	☆
P3-21	Ifojusi biinu ti iyara isodipupo lọwọlọwọ iye to ipele	50 ~ 200%	50%	★
P3-22	Voltage iye to	650V~800.0V	770V	★

P3-23	Voltage iye to yiyan	0: asan 1: wulo	1	★
P3-24	Igbohunsafẹfẹ ere fun voltage iye to	0~100	30	☆
P3-25	Voltage ere fun voltage iye to	0~100	30	☆
P3-26	Igbohunsafẹfẹ dide ala nigba voltage iye to	0 ~ 50Hz	5Hz	★
P4 Ẹgbẹ: Input ebute
P4-00	Aṣayan iṣẹ S1	0: ko si iṣẹ 1: Ṣiṣe iwaju (FWD) tabi ṣiṣe pipaṣẹ 2: yiyi pada (REV) tabi itọsọna ti o dara ati odi (Akiyesi: ṣeto 1, 2 lati lo pẹlu P4-11) 3:Iṣakoso iṣẹ waya mẹta 4: jog siwaju (FJOG) 5: jog yiyipada (RJOG) 6: Terminal UP 7: Terminal DOWN 8: pako ọfẹ 9: Atunto aṣiṣe (Tunto) 10: ṣiṣe idaduro 11: Aṣiṣe ita gbangba ṣii deede. igbewọle 12:Ọpọlọpọ-igbesẹ pipaṣẹ ebute 1 13:Ọpọlọpọ-igbesẹ pipaṣẹ ebute 2 14:Ọpọlọpọ-igbesẹ pipaṣẹ ebute 3 15:Multi-igbese pipaṣẹ ebute 4 16: Acceleration/Deceleration time selection terminal 1 17:Acceleration/Deceleration time selection terminal 2 18: Igbohunsafẹfẹ pipaṣẹ iyipada 19: Eto oke/isalẹ ko o(terminal, keyboard) 20: aṣẹ iṣakoso lati yipada ebute 1 21: isare/Deceleration jẹ eewọ 22: idaduro PID 23: Tunto ipo PLC ti o rọrun 24: Wobble ti daduro 25: Counter input 26: Counter reset 27: Iṣagbewọle kika gigun 28: Tunto gigun 29: Alaabo iṣakoso Torque 30: Giga-iyara pulse input (nikan wulo fun S5) 31: Ni ipamọ 32: Lẹsẹkẹsẹ DC braking 33: Ita aṣiṣe deede titi igbewọle 34: Igbohunsafẹfẹ iyipada sise 35: PID itọsọna ti wa ni yi pada 36: Ibudo idaduro ita 1 37: pipaṣẹ iṣakoso lati yipada ebute 2 38: Asopọmọra PID ti wa ni idaduro 39: Orisun igbohunsafẹfẹ A ati iyipada igbohunsafẹfẹ tito tẹlẹ 40: Orisun Igbohunsafẹfẹ B ati iyipada igbohunsafẹfẹ tito tẹlẹ 41: Iṣẹ yiyan ebute mọto 42: Ni ipamọ 43: PID paramita yipada 44: Aṣiṣe asọye olumulo 1 45: Aṣiṣe asọye olumulo 2 46:Iṣakoso iyara / iṣakoso iyipo iyipada 47: Duro pajawiri 48: Idena ibudo ita 2 49: Decelerationof DC braking 50: Akoko ṣiṣe yii jẹ imukuro 51: waya-meji/waya mẹta 52: Yiyipada igbohunsafẹfẹ alaabo 53-59: Ni ipamọ	1	★
P4-01	Aṣayan iṣẹ S2		4	★
P4-02	Aṣayan iṣẹ S3		9	★
P4-03	Aṣayan iṣẹ S4		12	★
P4-04	Aṣayan iṣẹ S5		13	★
P4-05	Aṣayan iṣẹ S6		0	★
P4-06	Aṣayan iṣẹ S7		0	★
P4-07	Aṣayan iṣẹ S8		–	★
P4-08	Ni ipamọ		–	★
P4-09	Ni ipamọ		–	★
P4-10	S1 ~ S4 akoko àlẹmọ	Awọn 0.000 ~ ~ 1.000s	0.010s	☆
P4-11	Ipo iṣakoso ebute	0: ila meji 1 1: ila meji 2 2: ila mẹta 1 3: ila mẹta 2	–	★
P4-12	Ebute UP / DOWN N oṣuwọn	0.001Hz/s ~ 65.535Hz/s	1.00Hz/s	☆
P4-13	AI tẹ 1 min. igbewọle	0.00V ~ P4-15	0.00V	☆
P4-14	Ibamu ogoruntage ti AI tẹ 1 min. igbewọle	- 100.0% ~ + 100.0%	0.0%	☆
P4-15	AI tẹ 1 max. igbewọle	P4-13 ~ + 10.00V	10.00V	☆
P4-16	Ibamu ogoruntage ti AI tẹ 1 max. igbewọle	- 100.0% ~ + 100.0%	100.0%	☆
P4-17	AI1 àlẹmọ akoko	Awọn 0.00 ~ ~ 10.00s	0.10s	☆
P4-18	AI tẹ 2 min. igbewọle	0.00V ~ P4-20	0.00V	☆
P4-19	Ibamu ogoruntage ti AI tẹ 2 min. igbewọle	- 100.0% ~ + 100.0%	0.0%	☆
P4-20	AI tẹ 2 max. igbewọle	P4-18 ~ + 10.00V	10.00V	☆
P4-21	Ibamu ogoruntage ti AI tẹ 2 max. igbewọle	- 100.0% ~ + 100.0%	100.0%	☆
P4-22	AI2 àlẹmọ akoko	Awọn 0.00 ~ ~ 10.00s	0.10s	☆
P4-23	AI3 tẹ min. igbewọle	– 10.00V ~ P4-25	- 10.0V	☆
P4-24	Ibamu ogoruntage ti AI tẹ 3 min. igbewọle	- 100.0% ~ + 100.0%	- 100.0%	☆
P4-25	AI tẹ 3 max. igbewọle	P4-23 ~ + 10.00V	10.00V	☆
P4-26	Ibamu ogoruntage ti AI tẹ 3 max. igbewọle	- 100.0% ~ + 100.0%	100.0%	☆
P4-27	AI3 àlẹmọ akoko	Awọn 0.00 ~ ~ 10.00s	0.10s	☆
P4-28	Pulse min. igbewọle	0.00kHz ~ P4-30	0.00 kHz	☆
P4-29	Ibamu ogoruntage ti pulse min. igbewọle	- 100.0% ~ 100.0%	0.0%	☆
P4-30	Pulse max. igbewọle	P4-28 ~ 100.00kHz	50.00 kHz	☆
P4-31	Ibamu ogoruntage ti pulse max. igbewọle	- 100.0% ~ 100.0%	100.0%	☆
P4-32	Pulse àlẹmọ akoko	Awọn 0.00 ~ ~ 10.00s	0.10s	☆
P4-33	AI tẹ aṣayan	Bit: AI1 ìsépo yiyan 1: ìsépo 1 (2 ojuami, wo P4-13~P4-16) 2: Ìsépo 2 (2 ojuami, wo P4-18~P4-21) 3: ìsépo 3 (2 ojuami, wo P4-). 23~P4-26) 4: ìsépo 4 (4 ojuami, wo A6-00~A6-07) 5: ìsépo 5 (4 ojuami, wo A6-08~A6-15) Mẹwàá: AI2 yíyan ìsépo, ibid Ọgọrun:AI3 ekoro yiyan, ibid	321	☆
P4-34	Ṣiṣeto yiyan nigbati AI kere ju min. igbewọle	Bit: AI1 kere ju eto igbewọle ti o kere ju 0: ni ibamu si eto igbewọle ti o kere ju 1: 0.0% Mẹwa: AI2 kere ju eto titẹ sii ti o kere ju, ibid Awọn ọgọọgọrun: AI3 kere ju eto igbewọle to kere ju, ibid	000	☆
P4-35	S1 idaduro	Awọn 0.0 ~ ~ 3600.0s	0.0s	★
P4-36	S2 idaduro	Awọn 0.0 ~ ~ 3600.0s	0.0s	★
P4-37	S3 idaduro	Awọn 0.0 ~ ~ 3600.0s	0.0s	★
P4-38	Aṣayan ipo ti nṣiṣe lọwọ S1 ~ S5 1	0: giga ti nṣiṣe lọwọ 1: kekere ti nṣiṣe lọwọ: S1 Mẹwa: S2 Awọn aaye ọgọrun: S3 Ẹgbẹẹgbẹrun awọn bit: S4 Milionu: S5	00000	★

Ẹgbẹ P5: Awọn ebute Ijade
P5-02	Yiyan 1 iṣẹ (TA-TC)	0: Iṣẹjade pulse (HDP) 1: Iyipada iyipada (HDY)	2	☆
P5-02	Yiyan 1 iṣẹ (TA-TC)	0: Ko si igbejade 1: Oluyipada n ṣiṣẹ 2: iṣẹjade aṣiṣe (idaduro ẹbi) 3: Wiwa ipele igbohunsafẹfẹ FDT1 o wu 4: igbohunsafẹfẹ de 5: Iṣẹ iyara odo (ko si abajade ni tiipa) 6: apọju motor ṣaaju itaniji 7: Inverter overload pre-itaniji 8: Ṣeto iye kika lati de 9: Pato pe iye kika ti de 10: gigun lati de 11: PLC ọmọ ti pari 12: Akoko ṣiṣe akopọ ti de 13: Iwọn igbohunsafẹfẹ 14: Iwọn iyipo 15: Ṣetan lati sure 16: AI1>AI2 17: oke iye dide igbohunsafẹfẹ 18: Isalẹ igbohunsafẹfẹ dide (isẹ jẹmọ) 19: Undervoltage ipo igbejade 20: eto ibaraẹnisọrọ 21: Ipo ti pari (ni ipamọ) 22: ipo isunmọ (ni ipamọ) 23: iyara odo odo 2 (tun jade nigba ti o duro) 24: Lapapọ akoko agbara-soke de 25: Igbohunsafẹfẹ ipele 26: Igbohunsafẹfẹ 1 27: Igbohunsafẹfẹ 2 de opin 28: lọwọlọwọ 1 de iṣẹjade 29: lọwọlọwọ 2 ti de iṣẹjade 30: Titẹ dide ni akoko 31: AI1 input ti wa ni overrun 32: Underload 33: yiyipada yen 34: odo lọwọlọwọ ipinle 35:Module otutu de 36: O wu lọwọlọwọ 37: Isalẹ igbohunsafẹfẹ dide (tiipa tun jade) 38: Itaniji (tesiwaju) 39:Motor over otutu Ikilọ 40: Yi run akoko de 41: aṣiṣe o wu (fun free Duro ẹbi), ati labẹ voltage ko jade	2	☆
P5-07	Aṣayan iṣẹ-jade A01	0:Igbohunsafẹfẹ ṣiṣiṣẹ 1: Eto loorekoore 2: Iwajade lọwọlọwọ 3: Iyijade ti njade 4: Agbara iṣẹjade 5: Vol Outputtage 6: Iṣagbewọle pulse iyara-giga(100% ni ibamu100.0khz) 7:AI1 8:AI2 9:AI3 10:ipari 11:Iye iye 12:Eto ibaraẹnisọrọ 13:Iyara mọto 14:Iwajade lọwọlọwọ:(100% ti o baamu 1000.0A) 15: Vol wu jadetage (100% ti o baamu 1000.0V) 16: Iyijade ti njade mọto (Iye to daju, Ogoruntage ibatan si motor)	0	☆
P5-10	A01 Zero abosi olùsọdipúpọ	- 100.0% ~ + 100.0%	0.0%	☆
P5-11	A01 anfani	- 10.00 ~ + 10.00	1.00	☆
Ẹgbẹ P6: Ibẹrẹ/Duro Iṣakoso
P6-00	Ipo ibẹrẹ	0: Ibẹrẹ taara 1: Mimu mọto alayipo 2: Ibẹrẹ ayọ-tẹlẹ 3: Ibẹrẹ SVC ni iyara	0	☆
P6-01	Ipo ti mimu a alayipo motor	0: Lati idaduro igbohunsafẹfẹ 1: Lati 50Hz 2: Lati max. igbohunsafẹfẹ	0	★
P6-02	Iyara ti mimu motor alayipo	1~100	20	☆
P6-03	Bẹrẹ igbohunsafẹfẹ	0.00Hz ~ 10.00Hz	0.00Hz	☆
P6-04	Bẹrẹ akoko idaduro igbohunsafẹfẹ	Awọn 0.0 ~ ~ 100.0s	0.0s	★
P6-05	DC abẹrẹ braking 1 ipele/tẹlẹ-simi ipele	0% ~ 100%	50%	★
P6-06	DC abẹrẹ braking 1 akoko ti nṣiṣe lọwọ/ pre-excitation ti nṣiṣe lọwọ akoko	Awọn 0.0 ~ ~ 100.0s	0.0s	★
P6-07	Isare/Ipo isare	0: Isare ila / isare 1: S-curve isare/ deceleration A (aimi) 2: S ìsépo isare / deceleration B (ìmúdàgba)	0	★
P6-08	Iwọn akoko ti apakan ibẹrẹ S-curve	0.0%~(100.0% -P6-09)	30.0%	★
P6-09	Iwọn akoko ti apakan ipari S-curve	0.0%~(100.0% -P6-08)	30.0%	★
P6-10	Ipo iduro	0: Decelete lati da 1 : Etikun lati da	0	☆
P6-11	DC abẹrẹ braking 2 bẹrẹ igbohunsafẹfẹ	0.00Hz ~ max.frequency ( P0-10 )	0.00Hz	☆
P6-12	DC abẹrẹ braking 2 idaduro akoko	Awọn 0.0 ~ ~ 100.0s	0.0s	☆
P6-13	DC abẹrẹ braking 2 ipele	0% ~ 100%	50%	☆
P6-14	DC abẹrẹ braking 2 lọwọ akoko	Awọn 0.0 ~ ~ 100.0s	0.0s	☆
P6-15	Iwọn lilo braking	0% ~ 100%	100%	☆
P6-18	Ni mimu a alayipo motor lọwọlọwọ iye to	30% ~ 200%	Awoṣe ti o gbẹkẹle	☆
P6-21	Aago demagnetization (munadoko fun SVC)	0.00-5.00-orundun	Awoṣe ti o gbẹkẹle	☆
Ẹgbẹ P7: Isẹ bọtini foonu ati Ifihan LED
P7-02	Duro/Tun iṣẹ bọtini	0: Iṣẹ iduro bọtini STOP/RES wulo nikan lakoko iṣẹ keyboard 1: STOP/RES bọtini tiipa ti nṣiṣe lọwọ ni eyikeyi mode ti isẹ	1	☆
P7-03	Ifihan LED ti nṣiṣẹ awọn paramita 1	0000~FFFF Bit00: Igbohunsafẹfẹ ṣiṣiṣẹ 1 (Hz) Bit01: Ṣeto igbohunsafẹfẹ (Hz) Bit02: Vol.tage (V) Bit03: Abajade voltage (V) Bit04: Iwajade lọwọlọwọ (A) Bit05: Agbara ti o wu jade (kW) Bit06: Yiyi ti njade (%) Bit07: S ipo igbewọle ebute Bit08: HDO ipojade Bit09: AI1 voltage (V) Bit10: AI2 Voltage (V) Bit11: AI3 Voltage (V) Bit12: Ka iye Bit13: Iye gigun Bit14: Ifihan iyara fifuye Bit15: Eto PID	1F	☆
P7-04	Ifihan LED ti nṣiṣẹ awọn paramita 2	0000~FFFF Bit00: PID esi Bit01: PLC stage Bit02: Ga-iyara pulse igbewọle igbohunsafẹfẹ (kHz) Bit03: Awọn ọna igbohunsafẹfẹ 2 (Hz) Bit04: Ti o ku asiko isise Bit05: AI1 ṣaaju ki o to atunse voltage (V) Bit06: AI2 ṣaaju atunṣe voltage (V) Bit07: AI3 Atunse ṣaaju ki o to voltage (V) Bit08: Iyara ila Bit09: Aago agbara lọwọlọwọ (Wakati) Bit10: Akoko ṣiṣiṣẹ lọwọlọwọ (Min) Bit11: Iwọn titẹ sii pulse iyara giga (Hz) Bit12: Ibaraẹnisọrọ ṣeto aaye Bit13: Iyara Encoderfeedback (Hz) Bit14: Igbohunsafẹfẹ akọkọ A àpapọ (Hz) Bit15: Afihan igbohunsafẹfẹ B keji (Hz)	0	☆

P7-05	LED àpapọ Duro sile	0000~FFFF Bit00: Ṣeto igbohunsafẹfẹ (Hz) Bit01: Voltage (V) Bit02: S ipo igbewọle Bit03: HDO o wu ipo Bit04: AI1 voltage (V) Bit05: AI2 voltage (V) Bit06: AI3 voltage (V) Bit07: Ka iye Bit08: Iye gigun Bit09: PLC stage Bit10: Iyara fifuye Bit11: Eto PID Bit12: Iwọn titẹ sii pulse iyara giga (kHz)	33	☆
P7-06	Fifuye iyara àpapọ olùsọdipúpọ	0.0001~6.5000	1.0000	☆
P7-07	Heatsink otutu ti AC wakọ IGBT	- 20.0 ℃ ~ 120.0 ℃	–	●
P7-09	Accumulative yen akoko	0h ~ 65535h	–	●
P7-12	Nọmba awọn aaye eleemewa fun ifihan iyara fifuye	Bit: d0-14 nọmba awọn aaye eleemewa 0: 0 aaye eleemewa 1: 1 aaye eleemewa 2: 2 aaye eleemewa 3: 3 aaye eleemewa mẹwa: d0-19/d0-29 nọmba awọn aaye eleemewa 1: 1 aaye eleemewa 2 : 2 aaye eleemewa	21	☆
P7-13	Accumulative agbara-lori akoko	0h ~ 65535h	–	●
P7-14	Akojo agbara agbara	0kW ~ 65535kwh	–	●
Ẹgbẹ P8: Awọn iṣẹ Iranlọwọ
P8-04	Akoko idinku 2	0.0s si 6500.0s	Awoṣe ti o gbẹkẹle	☆
P8-05	Akoko isare 3	0.0s si 6500.0s	Awoṣe ti o gbẹkẹle	☆
P8-06	Akoko idinku 3	0.0s si 6500.0s	Awoṣe ti o gbẹkẹle	☆
P8-07	Akoko isare 4	0.0s si 6500.0s	Awoṣe ti o gbẹkẹle	☆
P8-08	Akoko idinku 4	0.0s si 6500.0s	Awoṣe ti o gbẹkẹle	☆
P8-09	Igbohunsafẹfẹ fo 1	0.00Hz si o pọju. igbohunsafẹfẹ	0.00Hz	☆
P8-10	Igbohunsafẹfẹ fo 2	0.00Hz si o pọju. igbohunsafẹfẹ	0.00Hz	☆
P8-11	Igbohunsafẹfẹ fo band	0.00Hz si o pọju. igbohunsafẹfẹ	0.00Hz	☆
P8-12	Siwaju / Yiyipada ṣiṣe yipada lori akoko agbegbe ti o ku	0.0s si 3000.0s	0.0s	☆
P8-13	Yiyan RUN yiyipada	0: aifẹ, 1: munadoko	0	☆
P8-14	Ipo ṣiṣiṣẹ nigbati itọkasi igbohunsafẹfẹ dinku ju iye ipo igbohunsafẹfẹ lọ	0 si 2	0	☆
P8-15	Oṣuwọn sisọ silẹ	0.00% si 100.00%	0.00%	☆
P8-16	Akojo agbara-lori akoko ala	0 si 65000h	0h	☆
P8-17	Ipele akoko ṣiṣe ikojọpọ	0 si 65000h	0h	☆
P8-18	Aṣayan Idaabobo ibẹrẹ	0: Kii ṣe aabo, 1: aabo	0	☆
P8-19	Iwọn wiwa igbagbogbo 1	0.00Hz si o pọju. igbohunsafẹfẹ	50.00Hz	☆
P8-20	Iṣawari igbohunsafẹfẹ 1	0.0% si 100.0%	5.0%	☆
P8-21	Iwọn wiwa ti ipo igbohunsafẹfẹ ibi-afẹde ti de	0.0% si 100.0%	0.0%	☆
P8-22	Lọ igbohunsafẹfẹ iṣẹ	0: aifẹ, 1: munadoko	0	☆
P8-25	Igbohunsafẹfẹ iyipada ti akoko accel 1 ati akoko accel 2	0.00Hz si o pọju. igbohunsafẹfẹ	0.00Hz	☆
P8-26	Igbohunsafẹfẹ iyipada ti akoko decel 1 ati akoko decel 2	0.00Hz si o pọju. igbohunsafẹfẹ	0.00Hz	☆
P8-27	Ṣeto ipo ti o ga julọ si iṣẹ JOG ebute	0: aifẹ, 1: munadoko	0	☆
P8-28	Iwọn wiwa igbagbogbo 2	0.00Hz si o pọju. igbohunsafẹfẹ	50.00Hz	☆
P8-29	Awọn hysteres iwari igbohunsafẹfẹ jẹ 2	0.0% si 100.0%	5.0%	☆
P8-30	Wiwa igbohunsafẹfẹ 1	0.00Hz si o pọju. igbohunsafẹfẹ	50.00Hz	☆
P8-31	Wiwa iwọn igbohunsafẹfẹ 1	0.0% si 100.0% ( max.frequency)	0.0%	☆
P8-32	Wiwa igbohunsafẹfẹ 2	0.00Hz si o pọju. igbohunsafẹfẹ	50.00Hz	☆
P8-33	Wiwa iwọn igbohunsafẹfẹ 2	0.0% si 100.0% (igbohunsafẹfẹ ti o pọju)	0.0%	☆
P8-34	Odo ipele wiwa lọwọlọwọ	0.0% si 300.0% (moto ti o wa lọwọlọwọ)	5.0%	☆
P8-35	Idaduro wiwa lọwọlọwọ odo	0.01s si 600.00s	0.10s	☆
P8-36	Ijade lori iloro lọwọlọwọ	1.1% (ko si wiwa) 1.2% si 300.0% (moto ti o wa lọwọlọwọ)	200.0%	☆
P8-37	Ijade lori idaduro wiwa lọwọlọwọ	0.00s si 600.00s	0.00s	☆
P8-38	Ipele wiwa ti lọwọlọwọ 1	0.0% si 300.0% (moto ti o wa lọwọlọwọ)	100.0%	☆
P8-39	Wiwa iwọn ti lọwọlọwọ 1	0.0% si 300.0% (moto ti o wa lọwọlọwọ)	0.0%	☆
P8-40	Ipele wiwa ti lọwọlọwọ 2	0.0% si 300.0% (moto ti o wa lọwọlọwọ)	100.0%	☆
P8-41	Wiwa iwọn ti lọwọlọwọ 2	0.0% si 300.0% (moto ti o wa lọwọlọwọ)	0.0%	☆
P8-42	Iṣẹ akoko	0: aiṣedeede 1: wulo	0.0%	★
P8-43	Nṣiṣẹ akoko eto ikanni	0 si 3	0	★
P8-44	Akoko ṣiṣe	0.0 si 6500.0 iṣẹju	0.0 min	★
P8-45	AI1 igbewọle voltage kekere iye to	0.00V to F8-46	3.10V	☆
P8-46	AI1 igbewọle voltage oke iye	F8-45 to 10.00V	6.80V	☆
P8-47	IGBT otutu ala	0 ℃ si 100 ℃	75 ℃	☆
P8-48	Itutu àìpẹ ṣiṣẹ mode	0: Fan gbalaye nigba isẹ 1: awọn àìpẹ ntọju nṣiṣẹ	0	☆
P8-49	Igbohunsafẹfẹ ji	F8-51 de ti o pọju. Igbohunsafẹfẹ (F0-10)	0.00Hz	☆
P8-50	Ji akoko idaduro	Awọn 0.0 ~ ~ 6500.0s	0.0s	☆
P8-51	Hibernating igbohunsafẹfẹ	0.00Hz lati ji igbohunsafẹfẹ (P8-49)	0.00Hz	☆
P8-52	Hibernating akoko idaduro	Awọn 0.0 ~ ~ 6500.0s	0.0s	☆
P8-53	Ipese akoko ṣiṣe ni akoko yii	0.0 ~ 6500.0 iṣẹju	0.0 min	☆
P8-54	Ojade agbara atunse olùsọdipúpọ	0.0% si 200.0%	100.0%	☆
Ẹgbẹ P9: Aṣiṣe ati Idaabobo
P9-00	Motor apọju Idaabobo	0: Eewọ 1: Ti gba laaye	1	☆
P9-01	Motor apọju Idaabobo ere	0.20 si 10.00	1.00	☆
P9-02	Apọju mọto onisọdipúpọ ìkìlọ ṣaaju	50% si 100%	80%	☆
P9-03	Apọjutage Idaabobo ere	0~100	30	☆
P9-04	Apọjutage Idaabobo voltage	650 si 800V	770V	☆
P9-07	Iwari ti kukuru-Circuit si ilẹ lori agbara-lori	Awọn ẹya: Agbara-si-ilẹ yiyan Idaabobo kukuru-kikuru 0: Invalid 1: Ibi mewa to wulo: Asayan aabo kukuru-si-ilẹ ṣaaju ṣiṣe 0: Ti ko tọ	01	☆
P9-08	Braking kuro loo voltage	650 si 800V	720V	☆

P9-09	Awọn akoko atunto aifọwọyi		0 si 20			0	☆
P9-10	Aṣayan iṣẹ DO lakoko atunto aifọwọyi		0: Ko si igbese 1: Ise			0	☆
P9-11	Idaduro aifọwọyi		0.1s si 100.0s			1.0s	☆
P9-12	Pipadanu alakoso igbewọle/aabo yiyi iṣaju gbigba agbara		Ẹyọ ẹyọkan: Aṣayan idaabobo ipadanu ọna titẹ sii Ibi kẹwa: Olubasọrọ tabi yiyan aabo fa-ni 0: Eewọ 1: Ti gba laaye			–	–
P9-13	O wu alakoso pipadanu Idaabobo		Awọn nọmba ẹyọkan: yiyan aabo ipadanu alakoso iṣẹjade 0: Idiwọ 1: Ti gba laaye aaye mewa: yiyan aabo ipadanu ipele jade ṣaaju ṣiṣe 0: Eewọ 1: Ti gba laaye			01	☆
P9-14	1st ẹbi iru		00-55			–	●
P9-15	2nd ẹbi iru					–	●
P9-16	3rd (titun) iru aṣiṣe					–	●
P9-17	Igbohunsafẹfẹ lori aṣiṣe 3rd		–			–	●
P9-18	Lọwọlọwọ lori ẹbi 3rd		–			–	●
P9-19	Voltage lori 3rd ẹbi		–			–	●
P9-20	DI ipinle lori aṣiṣe 3rd		–			–	●
P9-21	Ṣe alaye lori aṣiṣe 3rd		–			–	●
P9-22	Ipo awakọ AC lori ẹbi 3rd		–			–	●
P9-23	Agbara-akoko lori aṣiṣe 3rd		–			–	●
P9-24	Ṣiṣe akoko lori aṣiṣe 3rd		–			–	●
P9-27	Igbohunsafẹfẹ lori ẹbi keji		–			–	●
P9-28	Lọwọlọwọ lori ẹbi 2nd		–			–	●
P9-29	Voltage lori 2nd ẹbi		–			–	●
P9-30	DI ipinle lori aṣiṣe 2nd		–			–	●
P9-31	ṢE ipo lori ẹbi keji		–			–	●
P9-32	Ipo awakọ AC lori ẹbi keji		–			–	●
P9-33	Agbara-lori akoko lori aṣiṣe 2nd		–			–	●
P9-34	Nṣiṣẹ akoko lori 2nd ẹbi		–			–	●
P9-37	Igbohunsafẹfẹ Lori ẹbi 1st		–			–	●
P9-38	Lọwọlọwọ lori ẹbi 1st		–			–	●
P9-39	Voltage lori aṣiṣe 1st		–			–	●
P9-40	DI ipinle lori aṣiṣe 1st		–			–	●
P9-41	ṢE sọ lori aṣiṣe akọkọ		–			–	●
P9-42	Ipo awakọ AC lori ẹbi akọkọ		–			–	●
P9-43	Agbara-lori akoko lori aṣiṣe 1st		–			–	●
P9-44	Nṣiṣẹ akoko lori 1st ẹbi		–			–	●
P9-47	Aṣayan igbese aabo aṣiṣe 1		0: ofe 1: Duro 2.tesiwaju ṣiṣe			00000	☆
P9-48	Aṣayan igbese aabo aṣiṣe 2		00000 si 11111			00000	☆
P9-49	Aṣayan igbese aabo aṣiṣe 3		00000 si 22222			00000	☆
P9-50	Aṣayan igbese aabo aṣiṣe 4		00000 si 22222			00000	☆
P9-54	Aṣayan igbohunsafẹfẹ fun tẹsiwaju lati ṣiṣe lori ẹbi		0 si 4			0	☆
P9-55	Igbohunsafẹfẹ afẹyinti lori ẹbi		0.0% si 100.0% (max. FrequencyP0-10)			100.0%	☆
P9-56	Iru ti motor otutu sensọ		0: Ko si sensọ otutu 1: Pt100 2: PT1000			–	–
P9-59	Agbara fibọ gigun-nipasẹ aṣayan iṣẹ		0: Aiṣedeede 1: ọkọ akero igbagbogbo voltage Iṣakoso 2: deceleration Duro			0	☆
P9-60	Ibale ti gigun fibọ agbara nipasẹ iṣẹ alaabo		80% si 100%			85%	☆
P9-62	Ipele ti gigun fibọ agbara nipasẹ iṣẹ ṣiṣe		60% si 100%			80%	☆
P9-63	Fifuye ti sọnu Idaabobo		0: Alaabo 1: Ṣiṣẹ			0	☆
P9-64	Fifuye ipele wiwa ti sọnu		0.0% si 100.0%			10.0%	☆
P9-65	Fifuye akoko wiwa ti sọnu		0.0s si 60.0s			1.0s	☆
P9-67	Overspeed erin ipele		0.0% si 50.0% (max.frequency)			20.0%	☆
P9-68	Overspeed erin akoko		0.0s si 60.0s			1.0s	☆
P9-69	Ipele wiwa ti aṣiṣe iyara		0.0% si 50.0% (max.frequency)			20.0%	☆
P9-70	Wiwa akoko aṣiṣe Iyara		0.0s si 60.0s			5.0s	☆
P9-71	Agbara dip gigun-nipasẹ ere Kp		0 si 100			40	☆
P9-72	Gigun fibọ agbara-nipasẹ olùsọdipúpọ apapọ		0 si 100			30	☆
P9-73	Akoko idinku ti agbara fibọ gigun-nipasẹ		0.0s si 300.0s			20.0s	★
Ẹgbẹ PA: PID Išė
PA-00		Ikanni eto itọkasi PID		0: Eto PA-01 1: AI1 (Akiyesi: J6 jumper) 2: AI2 3: AI3 4: Ga-iyara pulse input eto (S5) 5: Ibaraẹnisọrọ fi fun 6: Olona-apakan ilana fun	0		☆
PA-01		Eto oni-nọmba PID		0.0v% si 100.0%	50.0%		☆
PA-02		PID esi		0: AI1 (Akiyesi: J6 jumper) 1: AI2 2: AI3 3: AI1-AI2 4: Eto titẹ pulse iyara to gaju (S5) 5: Ibaraẹnisọrọ ti a fun ni 6: AI1 + AI2 7: MAX (\| AI1 \|, \| AI2 \|) 8: MIN (\| AI1 \|, \| AI2 \|)	0		☆
PA-03		Itọsọna iṣẹ PID		0: Iṣe rere 1: esi	0		☆
PA-04		Itọkasi PID ati sakani esi		0 si 65535	1000		☆
PA-05		Ere iwonba Kp1		0.0 si 1000.0	20.0		☆
PA-06		Integration akoko Ti1		0.01s si 10.00s	2.00s		☆
PA-07		Awọn akoko iyatọ Td1		0.000s si 10.000s	0.000s		☆
PA-08		Iwọn abajade PID ni itọsọna yiyipada		0.00 Hz si o pọju. Igbohunsafẹfẹ P0-10	0.00Hz		☆
PA-09		Iwọn aṣiṣe PID		0.0% si 100.0%	0.0%		☆
PA-10		Iwọn iyatọ PID		0.00% si 100.00%	0.10%		☆
PA-11		PID itọkasi akoko iyipada		0.00s si 650.00s	0.00s		☆
PA-12		PID esi àlẹmọ akoko		0.00s si 60.00s	0.00s		☆
PA-13		Akoko àlẹmọ iṣẹjade PID		0.00s si 60.00s	0.00s		☆
PA-14		Ni ipamọ		–	–		–
PA-15		Ere iwonba Kp2		0.0 si 1000.0	20.0		☆
PA-16		Integration akoko Ti2		0.01s si 10.00s	2.00s		☆
PA-17		Awọn akoko iyatọ Td2		0.000s si 10.000s	0.000s		☆
PA-18		PID paramita yipada lori ipo		0 si 3	0		☆
PA-19		Aṣiṣe PID 1 fun iyipada aifọwọyi		0.0% to PA-20	20.0%		☆
PA-20		Aṣiṣe PID 2 fun iyipada aifọwọyi		PA-19 si 100.0%	80.0%		☆
PA-21		PID iye ibẹrẹ		0.0% si 100.0%	0.0%		☆
PA-22		PID iye ibẹrẹ akoko lọwọ		0.00s si 650.00s	0.00s		☆

PA-23	Awọn iyapa ọnajade meji siwaju si o pọju	0.0% si 100.0%	1.00%	☆
PA-24	Awọn iyapa abajade meji yiyipada ti o pọju	0.0% si 100.0%	1.00%	☆
PA-25	PID ohun ini	00 si 11	00	☆
PA-26	Ipele wiwa ti ipadanu esi PID	0.0%: Ko si wiwa 0.1% si 100.0%	0.0%	☆
PA-27	Akoko wiwa ti ipadanu esi PID	0.0s si 20.0s	0.0s	☆
PA-28	Aṣayan iṣẹ PID ni iduro	0: Da ko si isẹ, 1: Down akoko isẹ	0	☆
Ẹgbẹ Pb: Iṣẹ Wobble, Gigun Ti o wa titi ati kika
Pb-00	Ipo eto Wobble	0: 0: ojulumo si aarin igbohunsafẹfẹ, 1: ojulumo si awọn ti o pọju igbohunsafẹfẹ	0	☆
Pb-01	Wubble amplitude	0.0% si 100.0%	0.0%	☆
Pb-02	Igbesẹ Wobble	0.0% si 50.0%	0.0%	☆
Pb-03	Wobble ọmọ	0.1s si 3000.0s	10.0s	☆
Pb-04	Igbi onigun mẹta ti nyara iye akoko	0.1% si 100.0%	50.0%	☆
Pb-05	Ṣeto ipari	0 to 65535m	1000m	☆
Pb-06	Gangan gigun	0 to 65535m	0m	☆
Pb-07	Nọmba awọn iṣọn fun mita kan	0.1 ~ 6553.5	100.0	☆
Pb-08	Ṣeto iye kika	1 ~ 65535	1000	☆
Pb-09	Pato iye kika	1 ~ 65535	1000	☆
PC Group: Olona-itọkasi ati Simple PLC Išė
PC-07	Itọkasi 7	- 100.0% si 100.0%	0.0%	☆
PC-08	Itọkasi 8	- 100.0% si 100.0%	0.0%	☆
PC-09	Itọkasi 9	- 100.0% si 100.0%	0.0%	☆
PC-10	Itọkasi 10	- 100.0% si 100.0%	0.0%	☆
PC-11	Itọkasi 11	- 100.0% si 100.0%	0.0%	☆
PC-12	Itọkasi 12	- 100.0% si 100.0%	0.0%	☆
PC-13	Itọkasi 13	- 100.0% si 100.0%	0.0%	☆
PC-14	Itọkasi 14	- 100.0% si 100.0%	0.0%	☆
PC-15	Itọkasi 15	- 100.0% si 100.0%	0.0%	☆
PC-16	Ipo ṣiṣiṣẹ PLC ti o rọrun	0: Duro ni ipari ṣiṣe kan 1: Jeki iye ikẹhin ni opin ṣiṣe kan 2: tẹsiwaju kaakiri	0	☆
PC-17	Aṣayan idaduro PLC ti o rọrun	Nọmba ẹyọkan: Aṣayan iranti agbara-isalẹ 0: Ko si iranti nigbati agbara ba wa ni pipa 1: iranti isale agbara Ibi kẹwa: Da aṣayan iranti duro 0: Duro iranti 1: iranti tiipa	00	☆
PC-18	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 0	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-19	Akoko isare / isare ti itọkasi PLC ti o rọrun 0	0 si 3	0	☆
PC-20	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 1	0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-21	Akoko isare / isare ti itọkasi PLC ti o rọrun 1	0 si 3	0	☆
PC-22	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 2	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-23	Akoko isare / isare ti itọkasi PLC ti o rọrun 2	0 si 3	0	☆
PC-24	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 3	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-25	Akoko isare / isare ti itọkasi PLC ti o rọrun 3	0 si 3	0	☆
PC-26	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 4	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-27	Akoko isare / isare ti itọkasi PLC ti o rọrun 4	0 si 3	0	☆
PC-28	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 5	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-29	Akoko isare / isare ti itọkasi PLC ti o rọrun 5	0 si 3	0	☆
PC-30	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 6	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-31	Akoko isare / isare ti itọkasi PLC ti o rọrun 6	0 si 3	0	☆
PC-32	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 7	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-33	Akoko isare / isare ti itọkasi PLC ti o rọrun 7	0 si 3	0	☆
PC-34	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 8	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-35	Akoko isare / isare ti itọkasi PLC ti o rọrun 8	0 si 3	0	☆
PC-36	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 9	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-37	Akoko isare / isare ti itọkasi PLC ti o rọrun 9	0 si 3	0	☆
PC-38	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 10	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-39	Akoko isare / isare ti itọkasi PLC ti o rọrun 10	0 si 3	0	☆
PC-40	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 11	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-41	Akoko isare / isare ti itọkasi PLC ti o rọrun 11	0 si 3	0	☆
PC-42	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 12	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-43	Akoko isare / isare ti itọkasi PLC ti o rọrun 12	0 si 3	0	☆
PC-44	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 13	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-45	Akoko isare / isare ti itọkasi PLC ti o rọrun 13	0 si 3	0	☆
PC-46	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 14	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-47	Akoko isare / isare ti itọkasi PLC ti o rọrun 14	0 si 3	0	☆
PC-48	Akoko ṣiṣe ti itọkasi PLC ti o rọrun 15	0.0s (wakati) si 6500.0s (wakati)	0.0s (wakati)	☆
PC-49	Akoko isare / isare ti itọkasi PLC ti o rọrun 15	0 si 3	0	☆
PC-50	Akoko akoko ti o rọrun PLC nṣiṣẹ	0:s, 1:h	0	☆

PC-51	Itọkasi 0 orisun	0: koodu iṣẹ PC-00 ni a fun 1: AI1 2: AI2 3: AI3 4: Ga titẹ polusi iyara 5: PID 6: Igbohunsafẹfẹ tito tẹlẹ (P0-08) ti a fun, UP / DOWN le ṣe atunṣe	0	☆
Pd Ẹgbẹ: ibaraẹnisọrọ
Pd-00	Oṣuwọn Baud	Bit: MODBUS 0: 300BPS 1: 600BPS 2: 1200BPS 3: 2400BPS 4: 4800BPS 5: 9600BPS 6: 19200BPS 7: 38400BPS 8: 57600BP 9: 115200BPS Mẹwa: pa Ọgọrun: ni ipamọ	005	☆
Pd-01	Aami kika data	0: ko si parity (8-N-2) 1: Ani ayẹwo (8-E-1) 2: Odd paraty (8-O-1) 3: Ko si paraty ( 8-N-1)	0	☆
Pd-02	Adirẹsi agbegbe	0: Adirẹsi igbohunsafefe; 1 si 247	1	☆
Pd-03	Idaduro esi	0 si 20 ms	2	☆
Pd-04	Ibaraẹnisọrọ akoko ipari	1.1: invalid 1.2: s to 60.0s	0.0	☆
Pd-05	Aṣayan Ilana Modbus ati fireemu data PROFIBUS-DP	Bit: MODBUS 0: ti kii-bošewa MODBUS Ilana 1: boṣewa MODBUS Ilana	30	☆
Pd-06	Ipinnu lọwọlọwọ kika nipasẹ ibaraẹnisọrọ	0:0.01 1:0.1	0	☆
PE Ẹgbẹ: Olumulo-telẹ paramita
PE-00	paramita ti a ṣe alaye olumulo 0	P0-00 ~ PP-xx A0-00 ~ Ax-xx d0-00 ~ d0-xx d3-00 ~ d3-xx	D3-17	☆
PE-01	Olumulo-telẹ paramete1		D3-18	☆
PE-02	paramita ti a ṣe alaye olumulo 2		P0.00	☆
…………	…….		P0.00	☆
PE-29	paramita ti a ṣe alaye olumulo 29		P0.00	☆
PP Ẹgbẹ: Iṣakoso paramita iṣẹ
PP-00	Olumulo aṣínà	0 si 65535	0	☆
PP-01	Ipilẹṣẹ paramita	0: Ko si isẹ 1: Mu pada factory 0: Ko si isẹ 1: Mu pada factory sile ayafi awọn paramita motor 2: Ko awọn igbasilẹ 4: Ṣe afẹyinti awọn paramita olumulo lọwọlọwọ 501: Mu pada paramita afẹyinti olumulo pada	0	☆
PP-02	Paramita àpapọ ohun ini	Bit: d yiyan àpapọ ẹgbẹ 0: ko han 1: àpapọ mẹwa: Ẹgbẹ A fihan yiyan 0: ko han 1: àpapọ	11	★
PP-03	Asayan ti olukuluku àpapọ paramita	Bit: olumulo aṣa paramita Ẹgbẹ àpapọ yiyan 0: ko han 1: àpapọ mẹwa: Olumulo Change Parameter Group Ifihan Aṣayan 0: ko han 1: àpapọ	00	☆
PP-04	Asayan ti paramita iyipada	0: le ṣe atunṣe 1: ko le ṣe atunṣe	0	☆
A0 Ẹgbẹ: Torque Iṣakoso ati iye to
A0-00	Iyara / Yiyan iṣakoso iyipo	0: iyara Iṣakoso 1: iyipo Iṣakoso	0	★
A0-01	Orisun itọkasi Torque ni iṣakoso iyipo	0: Eto oni nọmba 1 (A0-03) 1: AI1 (Akiyesi: J6 jumper) 2: AI2 3: AI3 4: Titẹ sii pulse iyara to gaju (S5) 5: Ibaraẹnisọrọ ti a fun ni 6: MIN (AI1, AI2) 7: MAX (AI1, AI2) (awọn aṣayan 1-7 Iwọn iwọn kikun, ti o baamu si eto oni-nọmba A0-03)	0	★
A0-03	Eto oni-nọmba Torque ni iṣakoso iyipo	- 200.0% si 200.0%	150.0%	☆
A0-05	Iwaju max. igbohunsafẹfẹ ni iyipo Iṣakoso	0.00Hz si Igbohunsafẹfẹ ti o pọju:z(P0-10)	si	ma x.
A0-06	Yiyipada max. igbohunsafẹfẹ ni iyipo Iṣakoso	0.00Hz (P0-10)	si	ma x.
A0-07	Akoko isare ni iṣakoso iyipo	0.00s si 65000s	0.00s	☆
A0-08	Akoko idinku ninu iṣakoso iyipo	0.00s si 65000s	0.00s	☆
A2-47	Torque opin orisun ni iyara Iṣakoso	0: A2-48 eto 1: AI1 (Akiyesi: J6 jumper) 2: AI2 3: AI3 4: Iṣagbewọle pulse iyara giga (S5) 5: ibaraẹnisọrọ ti a fun 6: MIN (AI1, AI2) 7: MAX (AI1, AI2) ) 1-7 aṣayan kikun iwọn, ti o baamu si awọn eto oni-nọmba A2-48	0	☆
A2-48	Eto oni nọmba ti iyipo iyipo ni iṣakoso iyara	0.0% si 200.0%	150.0%	☆
A2-49	Orisun opin Torque ni iṣakoso iyara (atunṣe)	0: koodu iṣẹ P2-10 eto 1: AI1 (Akiyesi: J6 jumper)	0	☆
A5 Ẹgbẹ: Iṣakoso o dara ju
A5-00	DPWM yipada lori ipo igbohunsafẹfẹ oke	5.00Hz si o pọju. igbohunsafẹfẹ	8.00Hz	☆
A5-01	PWM awose Àpẹẹrẹ	0: Iṣatunṣe Asynchronous, 1: Amuṣiṣẹpọ Amuṣiṣẹpọ	0	☆
A5-02	Aṣayan ipo isanpada agbegbe oku	0: Ko si isanpada, 1: Ipo isanpada 1	1	☆
A5-03	Ijinle PWM ID	0 :PWM aifẹ 1:PWM le yan	0	☆
A5-04	Lori lọwọlọwọ sare idena	0:jeki 1:uncable	1	☆
A5-05	Voltage lori onisọdipúpọ awose	100% si 110%	105%	★
A5-06	Labẹ voltage ala	150 si 420V	350V	☆
A5-08	Atunṣe akoko agbegbe ti o ku	0.0% si 8.0%	0.0%	★
A5-09	Lori voltage ala	650 si 820V	Awoṣe ti o gbẹkẹle	★
A6 Ẹgbẹ: AI CA6 Ẹgbẹ: AI Curve Settingurve Eto
A6-00	AI tẹ 4 min. igbewọle	– 10.00V to A6-02	0.00V	☆
A6-01	Ibamu ogoruntage ti AI tẹ 4 min. igbewọle	- 100.0% si 100.0%	0.0%	☆
A6-02	AI tẹ 4 ni titẹ sii flexion 1	A6-00 fun A6-04	3.00V	☆
A6-15	Ibamu ogoruntage ti AI tẹ 5 max. igbewọle	- 100.0% si 100.0%	30.0%	☆
A6-24	Fo ojuami ti AI1 igbewọle ibaamu eto	- 100.0% si 100.0%	0.0%	☆

AC Ẹgbẹ: AIAO Atunse
AC-00	AI1 iwọn voltage 1	- 10.00 to 10.000V	factory atunse	☆
AC-01	AI1 han voltage 1	- 10.00 to 10.000V	factory atunse	☆
AC-02	AI1 iwọn voltage 2	- 10.00 to 10.000V	factory atunse	☆
AC-03	AI1 han voltage 2	- 10.00 to 10.000V	factory atunse	☆
AC-12	Ao1 Àkọlé voltage1	- 10.00 to 10.000V	factory atunse	☆
AC-13	Ao1 iwọn voltage 1	- 10.00 to 10.000V	factory atunse	☆
AC-14	AO1Àkọlé voltage 2	- 10.00 to 10.000V	factory atunse	☆
AC-15	Ao1 iwọn voltage 2	- 10.00 to 10.000V	factory atunse	☆

Abojuto Parameters

Iṣẹ-ṣiṣe Code	Oruko	Ifihan Ibiti	Adirẹsi Ibaraẹnisọrọ
Ẹgbẹ d0: Mimojuto Parameters
D0-00	Nṣiṣẹ igbohunsafẹfẹ	0.01Hz	7000H
D0-01	Itọkasi igbohunsafẹfẹ	0.01Hz	7001H
D0-02	Voltage	0.1V	7002H
D0-03	O wu voltage	1V	7003H
D0-04	O wu lọwọlọwọ	0.01A	7004H
D0-05	Agbara itujade	0.1kW	7005H
D0-06	Yiyi ti o wu jade	0.1%	7006H
D0-07	S igbewọle ipinle	1	7007H
D0-08	HDO o wu ipinle	1	7008H
D0-09	AI1 voltage	0.01V	7009H
D0-10	AI2 voltage/ lọwọlọwọ	0.01V / 0.01mA	700AH
D0-11	AI3 voltage	0.01V	700BH
D0-12	Ka iye	1	700CH
D0-13	iye ipari	1	700DH
D0-14	Fifuye iyara àpapọ	1	700EH
D0-15	PID itọkasi	1	700FH
D0-16	PID esi	1	7010H
D0-17	PLC stage	1	7011H
D0-18	Polusi itọkasi	0.01kHz	7012H
D0-19	iyara esi	0.01Hz	7013H
D0-20	Ti o ku akoko nṣiṣẹ	0.1 min	7014H
D0-21	AI1 voltage ṣaaju atunṣe	0.001V	7015H
D0-22	AI2 voltage (V)/ lọwọlọwọ (MA) ṣaaju atunṣe	0.001V / 0.01mA	7016H
D0-23	AI3 voltage ṣaaju	0.001V	7017H
D0-24	Iyara mọto	1m/min	7018H
D0-25	Accumulative agbara-lori akoko	1 min	7019H
D0-26	Accumulative yen akoko	0.1 min	701AH

Ifihan aṣiṣe

Aṣiṣe koodu	Aṣiṣe
FU02	Lori lọwọlọwọ nigba isare
FU03	Lori lọwọlọwọ nigba deceleration
FU04	Lori lọwọlọwọ ni iyara igbagbogbo
FU05	Lori voltage nigba isare
FU06	Lori voltage nigba deceleration
FU07	Lori voltage ni ibakan iyara
FU08	Aṣiṣe resistor ṣaaju gbigba agbara
FU09	Labẹ voltage
FU10	AC wakọ apọju
FU11	Apọju mọto
FU13	Ipadanu alakoso ijade
FU14	overheat
FU15	Jade aṣiṣe ise agbese
FU16	Aṣiṣe ibaraẹnisọrọ
FU17	Olubasọrọ tabi aṣiṣe

Aṣiṣe koodu	Aṣiṣe
FU18	Ikuna wiwa lọwọlọwọ
FU19	Moto ara eko aiṣedeede
FU20	Aṣiṣe kooduopo
FU21	EEPROM kika-kọ
FU23	Circuit kukuru si ilẹ
FU26	Accumulative yen akoko
FU27	Aṣiṣe asọye olumulo 1
FU28	Aṣiṣe asọye olumulo 2
FU29	Ikojọpọ agbara arọwọto aṣiṣe
FU30	Pipadanu fifuye
FU31	Awọn esi PID ti sọnu lakoko ṣiṣe
FU40	Pulse-nipasẹ-pulse aṣiṣe iye to lọwọlọwọ
FU41	Aṣiṣe iyipada motor lakoko ṣiṣe
Fu42	Iyapa iyara ti o pọju
FU43	Motor lori iyara

Awọn iwe aṣẹ / Awọn orisun

STEPPERONLINE EV200 Series Ayipada Igbohunsafẹfẹ wakọ [pdf] Afowoyi olumulo
EV200-0400G-S2, EV200-0750G-S2, EV200-1500G-S2, EV200-2200G-S2, EV200-0750G-T3, EV200-1500G-T3, EV200-2200TEV 3- 200G-T3700, EV3, EV200 Series Ayipada Igbohunsafẹfẹ Drive, Ayipada Igbohunsafẹfẹ Drive, Igbohunsafẹfẹ Drive

Awọn itọkasi

Itọsọna olumulo