Awọn akoonu tọju
1 MICROCHIP PD77728 Ipo Aifọwọyi Forukọsilẹ Map
2 Awọn ilana Lilo ọja
3 Ọrọ Iṣaaju
4 Forukọsilẹ Iṣẹ-
5 Àtúnyẹwò History
6 Microchip Alaye
7 Ni agbaye Titaja ati Service
8 Awọn iwe aṣẹ / Awọn orisun
8.1 Awọn itọkasi
9 jẹmọ Posts

MICROCHIP-logo

MICROCHIP PD77728 Ipo Aifọwọyi Forukọsilẹ Map

MICROCHIP-PD77728-Ipo-laifọwọyi-Forukọsilẹ-Map-aworan-ọja

Awọn pato ọja

  • Awoṣe: PD77728
  • Ipo: Aifọwọyi
  • Map Forukọsilẹ: To wa

Awọn ilana Lilo ọja

Automode Operational Flowchart
Flowchart Iṣiṣẹ Automode n pese itọsọna igbese-nipasẹ-igbesẹ fun lilo maapu iforukọsilẹ PD77728:

  1. Bẹrẹ ilana naa.
  2. Ṣe Eto Ibẹrẹ (aṣayan) nipa atunto iboju boju Idilọwọ (0x01), Iṣaju Port (0x15), Oriṣiriṣi (0x17), Iyaworan Awọn ibudo (0x26), pataki ibudo OSS pupọ-bit (0x27, 0x28), opin agbara ibudo (0x2A, 0x2B ), ati Inrush Atunṣe (0x40).
  3. Ṣayẹwo boya eto Ibẹrẹ ti pari.
  4. Ti BẸẸNI, tẹsiwaju si Eto Ipo Ibugbe nipasẹ tito leto Ipo Port (0x12) ati Agbara Titari bọtini Mu ṣiṣẹ (0x19).
  5. Ti BẸẸNI, ṣayẹwo boya Pinpin Idilọwọ jẹ kekere.
  6. Ti BẸẸNI, ka iforukọsilẹ Iṣẹlẹ ti o ṣẹlẹ (0x00) ati awọn iforukọsilẹ Awọn iṣẹlẹ ti o baamu (0x02-0x0B).
  7. Ṣayẹwo boya Port ba wa ni ON.
  8. Ti BẸẸNI, ka Awọn Iwọn Iwọn Ibudo Port: Voltage & Lọwọlọwọ (0x30-0x3F), Awọn Ilana Ibuwọlu IEEE (0x44-0x4B), Awọn paramita Isọri (0x4C- 0x4F), ati Awọn paramita Autoclass (0x51-0x54)
  9. Pari ilana naa.

Forukọsilẹ Map alaye
Awọn alaye maapu iforukọsilẹ ẹrọ PD77728 ti wa ni atokọ ni ọpọlọpọ awọn tabili:

  1. Idilọwọ (Tabili 2-1)
  2. Iṣẹlẹ (Table 2-2)
  3. Ipo (Table 2-3)

Awọn Ibeere Nigbagbogbo (FAQ)

  • Q: Ohun ti o wa ni akọkọ irinše ti PD77728 Auto Mode Forukọsilẹ Map?
    A: Awọn paati akọkọ pẹlu Idilọwọ, Awọn iṣẹlẹ, ati awọn iforukọsilẹ ipo gẹgẹbi alaye ninu awọn tabili maapu iforukọsilẹ.
  • Q: Bawo ni MO ṣe tunto Eto Ipo Ibudo ni Apejọ Ṣiṣẹda Automode?
    A: O le tunto Ipo Ibudo nipa siseto ipo ibudo (0x12) ati agbara Mu bọtini titẹ ṣiṣẹ (0x19) gẹgẹbi awọn ilana ti a pese.

PD77728 Aifọwọyi Ipo Forukọsilẹ Map

Ọrọ Iṣaaju

Iwe yii ṣe apejuwe maapu iforukọsilẹ PD77728 ati iṣẹ ṣiṣe iforukọsilẹ. PD77728 ibaraẹnisọrọ ọna ti wa ni da lori I2C, lilo Forukọsilẹ wiwọle bi o han ni Figure 1. Kọọkan PD77728 pẹlu meji itẹlera I2C adirẹsi (a nikan I2C adirẹsi idari 4 ebute oko ti 2 orisii). Awọn adirẹsi I2C meji ti ṣeto nipasẹ awọn pinni A1-A4, ati adirẹsi kọọkan jẹ awọn die-die 7. Ẹrọ PD77728 ko nilo atilẹyin isanwo aago lati ọdọ agbalejo. Wo apakan I2C ni Iwe data PD77728 lati ṣeto adirẹsi I2C naa.
olusin 1. I2C lẹkọMICROCHIP-PD77728-Ipo-laifọwọyi-Forukọsilẹ-Map- (1)

  1. Automode Operational Flowchart
    Nọmba ti o tẹle yii ṣe afihan Iwe-aṣẹ Iṣiṣẹ adaṣe Automode ti maapu iforukọsilẹ PD77728.
    olusin 1-1. Automode Operational FlowchartMICROCHIP-PD77728-Ipo-laifọwọyi-Forukọsilẹ-Map- (2) MICROCHIP-PD77728-Ipo-laifọwọyi-Forukọsilẹ-Map- (3) MICROCHIP-PD77728-Ipo-laifọwọyi-Forukọsilẹ-Map- (4)
  2. Forukọsilẹ Map
    Awọn tabili atẹle ṣe atokọ awọn alaye maapu iforukọsilẹ ti ẹrọ PD77728.

Table 2-1. Idilọwọ

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x00 Idilọwọ RO Eto Iṣẹlẹ ipese Ibẹrẹ Aṣiṣe Apọju Kilasi Ti ṣe I2C

SR / fila Meas

 Disiko nnect Pwr O dara

Iṣẹlẹ

 Pwr Muu ṣiṣẹ

Iṣẹlẹ

 1000,

0000b
0x01 Int

Boju-boju

 R/W Eto Boju-boju 1000,

0000b

Table 2-2. Iṣẹlẹ

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tunto Ìpínlẹ̀
0x02 Agbara RO 4321 Power Good Change Power Jeki Change 0000,0

000b
0x03 Kọr Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x04 Iwari/

Iyasọtọ

 RO 4321 Kilasi Ti ṣe Wa/CC Ti ṣe 0000,0

000b
0x05 Kọr Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x06 Aṣiṣe RO 4321 Ṣiṣe labẹ Apọju 0000,0

000b
0x07 Kọr Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x08 Bẹrẹ RO 4321 Aṣiṣe Idiwọn lọwọlọwọ Aṣiṣe agbara Up 0000,0

000b
0x09 Kọr Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x0A Ipese RO 4321 Lori iwọn otutu VDD UVLO

Ikuna

 VDD UVLO

Ikilo

 Vpwr UVLO PCUT34 PCUT1 OSS

Iṣẹlẹ

 Àgbo

Aṣiṣe

 00xx,0b
0x0B Kọr

Table 2-3. Ipo

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tunto Ìpínlẹ̀
0x0C Wa / Kilasi

Ipo

 RO 1 Kilasi ti a rii (wo Tabili 3-8) Ipo Wiwa (wo Tabili 3-7) 0000,00

00b
0x0D Wa / Kilasi

Ipo

 RO 2 0000,00

00b
0x0E Wa / Kilasi

Ipo

 RO 3 0000,00

00b
0x0F Wa / Kilasi

Ipo

 RO 4 0000,00

00b
0x10 Agbara RO 4321 Agbara Dara Mu agbara ṣiṣẹ 0000,00

00b
Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x11 Pin RO Eto AUTO Adirẹsi onibara Ni ipamọ Ni ipamọ 0,SA[4: 0],0,0b

Table 2-4. Iṣeto ni

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tunto Ìpínlẹ̀
0x12 Ibudo

Ipo

 R/W 4321 Ipo Port 4 (wo Tabili 3-9) Ipo Port 3 (wo Tabili 3-9) Ipo Port 2 (wo Tabili 3-9) Ipo Port 1 (wo Tabili 3-9) 0000,00 00b
0x15 PWRPR R/W 4321 Port Power ayo Pa PCUT kuro 0000,00

00b
Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x17 Oriṣiriṣi R/W Agbaye Ṣiṣe Pinpin Idilọwọ Port Sig Idiwon Ni ipamọ Multi- Bit

Ni ayo

 Yipada Ni ipamọ 0x29

Iwa

 1100,00

00b
Kilasi ṢEṢE
0x19 Agbara

Mu ṣiṣẹ

 WO 4321 Agbara Paa Agbara Tan 0000,00

00b
Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1

Table 2-5. Gbogboogbo

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tunto Ìpínlẹ̀
0x1B ID RO Eto ID iṣelọpọ IC ID xxxx,x101b (Akiyesi 1)
0x1C AC/CC RO 4321 Ti ṣe awari AutoClass Awọn abajade Ṣayẹwo Asopọmọra 0000,0000b
Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 Ibudo 3, 4 Ibudo 1, 2
  • Akiyesi:
  • 1. x = Aimọ iye
  • Table 2-6. Pataki
Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x24 Agbara lori Aṣiṣe RO 4321 Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1 0000,0000b
0x25 KOR 0000,0000b
0x26 Matrix ibudo R/W 4321 Port 4 remap Port 3 remap Port 2 remap Port 1 remap 1110,0100b
0x27 Olona-Bit Power ayo R/W 21 Resv Ibudo 2 Resv Ibudo 1 0000,0000b
0x28 R/W 43 Resv Ibudo 4 Resv Ibudo 3 0000,0000b
0x2A 4P Olopa Config R/W 21 4P Olopa Port 1, 2 1111,1111b
0x2B R/W 43 4P Olopa Port 3, 4 1111,1111b
0x2C Afẹfẹ RO 4321 Kú otutu 367 - 2 * (regVal_decimal) (awọn iwọn Celsius) —
0x2E VPWR RO 4321 VPWR LSB —
0x2F RO Ni ipamọ VPWR MSB —

Table 2-7. Ṣeto Iforukọsilẹ ti o gbooro — Wiwọn Parametric Port

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x30 I-LSB RO 1 Port 1 LSB lọwọlọwọ 0000,0000b
0x31 I-MSB RO 1 Ni ipamọ Port 1 MSB lọwọlọwọ 0000,0000b
0x32 V-LSB RO 1 Ibudo 1 Voltage LSB 0000,0000b
0x33 V-MSB RO 1 Ni ipamọ Ibudo 1 Voltagati MSB 0000,0000b
0x34 I-LSB RO 2 Port 2 LSB lọwọlọwọ 0000,0000b
0x35 I-MSB RO 2 Ni ipamọ Port 2 MSB lọwọlọwọ 0000,0000b
0x36 V-LSB RO 2 Ibudo 2 Voltage LSB 0000,0000b
0x37 V-MSB RO 2 Ni ipamọ Ibudo 2 Voltagati MSB 0000,0000b
0x38 I-LSB RO 2 Port 3 LSB lọwọlọwọ 0000,0000b
Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x39 I-MSB RO 2 Ni ipamọ Port 3 MSB lọwọlọwọ 0000,0000b
0x3A V-LSB RO 2 Ibudo 3 Voltage LSB 0000,0000b
0x3B V-MSB RO 2 Ni ipamọ Ibudo 3 Voltagati MSB 0000,0000b
0x3C I-LSB RO 2 Port 4 LSB lọwọlọwọ 0000,0000b
0x3D I-MSB RO 2 Ni ipamọ Port 4 MSB lọwọlọwọ 0000,0000b
0x3E V-LSB RO 2 Ibudo 4 Voltage LSB 0000,0000b
0x3F V-MSB RO 2 Ni ipamọ Ibudo 4 Voltagati MSB 0000,0000b

Table 2-8. Eto Iforukọsilẹ ti o gbooro — Iṣeto 1

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x40 Afẹyinti ati Inrush RW 4321 Ko Lo Inrush adijositabulu 0000,0000b
Ibudo 4 Ibudo 3 Ibudo 2 Ibudo 1
0x41 Firmware RO Eto Atunyẹwo Famuwia xxxx,xxxxb (Akiyesi 1)
0x43 ID ẹrọ RO Eto ID ẹrọ Silikoni àtúnyẹwò Kan si Microchip fun famuwia imudojuiwọn julọ.
  • Akiyesi:
  • 1. x = Aimọ iyipada
  • Table 2-9. Port Ibuwọlu wiwọn
Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x44 Wa Resistance RO 4 Port 1 Erin Ibuwọlu Resistance 0000,0000b
0x45 Wa Resistance RO 3 Port 2 Erin Ibuwọlu Resistance 0000,0000b
0x46 Wa Resistance RO 2 Port 3 Erin Ibuwọlu Resistance 0000,0000b
0x47 Wa Resistance RO 1 Port 4 Erin Ibuwọlu Resistance 0000,0000b
0x48 Wa Resistance RO 4 Port 1 Erin Ibuwọlu Capacitance 0000,0000b
0x49 Wa Resistance RO 3 Port 2 Erin Ibuwọlu Capacitance 0000,0000b
0x4A Wa Resistance RO 2 Port 3 Erin Ibuwọlu Capacitance 0000,0000b
0x4B Wa Resistance RO 1 Port 4 Erin Ibuwọlu Capacitance 0000,0000b

Table 2-10. Iyatọ Class Ipo

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x4C sọtọ Class RO 1 Ibudo Kilasi ti a yàn 1 Ibudo Kilasi ti a beere 1 0000,0000b
0x4D RO 2 Ibudo Kilasi ti a yàn 2 Ibudo Kilasi ti a beere 2 0000,0000b
0x4E RO 3 Ibudo Kilasi ti a yàn 3 Ibudo Kilasi ti a beere 3 0000,0000b
0x4F RO 4 Ibudo Kilasi ti a yàn 4 Ibudo Kilasi ti a beere 4 0000,0000b

Table 2-11. Iṣeto ni AutoClass ati Ipo

Adirẹsi Oruko R/W Iru Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tun State
0x51 AutoClass Agbara RO 1 Ti ṣe Iṣiro Ibudo Agbara AutoClass 1 0000,0000b
0x52 RO 2 Ti ṣe Iṣiro Ibudo Agbara AutoClass 2 0000,0000b
0x53 RO 3 Ti ṣe Iṣiro Ibudo Agbara AutoClass 3 0000,0000b
0x54 RO 4 Ti ṣe Iṣiro Ibudo Agbara AutoClass 4 0000,0000b

Forukọsilẹ Iṣẹ-

Adirẹsi ti iforukọsilẹ kọọkan duro fun baiti ti data.
Iforukọsilẹ ni awọn ipo wọnyi:

  • RO: Ka nikan, iforukọsilẹ yii le jẹ kika nipasẹ agbalejo (orukọ yii ko le ṣeto nipasẹ agbalejo).
  • R/W: Ka/Kọ, iforukọsilẹ yii le ka ati ṣeto nipasẹ agbalejo.
  • KOR: Clear Lori Ka, iforukọsilẹ yii le jẹ kika nipasẹ agbalejo (ni kete ti o ba ti ka, iye rẹ ti tunto).
  • Iru:
    • Eto: Iforukọsilẹ duro iṣẹ ṣiṣe ti gbogbo adirẹsi I2C, ti o sopọ mọ iforukọsilẹ yii.
    • Port: Iforukọsilẹ duro iṣẹ-ṣiṣe ti ibudo tabi awọn ebute oko oju omi diẹ, nọmba ibudo ti o jọmọ ni a kọ sinu sẹẹli naa.

Awọn iforukọsilẹ iṣẹlẹ (0x00 si 0x0B) 0x00-Iṣẹlẹ Idilọwọ

  • Kọọkan bit duro iṣẹlẹ eto. Nigbati bit ba dọgba si 1, o tọka si pe iṣẹlẹ kan ti ṣẹlẹ.
  • Awọn wọnyi tabili awọn akojọ ti awọn iṣẹlẹ ni nkan ṣe pẹlu awọn Forukọsilẹ.
  • Table 3-1. Eto Iṣẹlẹ
Bit Iṣẹlẹ Oruko Iṣẹlẹ Apejuwe
0 Mu agbara ṣiṣẹ Port ti bere agbara-soke ọmọ.
1 Agbara Dara Ibudo ti pari agbara-soke stage ati pe o n pese agbara.
2 Ge asopọ Ibudo ti o firanṣẹ agbara ti gbe lati ON si ipo PA.
3 I2C Bus Asọ Tun / Legacy erin Setan Bosi I2C, akoko 50 ms lati Ibẹrẹ si Duro ipo IEEE® kuna iwariri ati pe atunto wiwa julọ ti ṣetan lati ka.
4 Isọri Ti Ṣee Isọri ati AutoClass ti pari
5 Apọju Apọju tabi iṣẹlẹ opin lọwọlọwọ
6 Ibẹrẹ aṣiṣe Inrush lọwọlọwọ ga ju tabi ipin agbara ti ko to
7 Ipese Ikuna jẹmọ ipese eto
  • 0x01-Iboju Idilọwọ
  • Oṣuwọn kọọkan jẹ aṣoju iboju-boju si iṣẹlẹ eto kan, ti a ṣalaye ninu iforukọsilẹ 0x00.
  • Nigbati a ba ṣeto bit nipasẹ agbalejo si 1, iṣẹlẹ kan yoo royin ni iwọn ibatan ti iforukọsilẹ 0x00. 0x02 / 0x03-Awọn iṣẹlẹ Agbara
  • Awọn iforukọsilẹ meji wọnyi tọkasi eyikeyi iyipada ninu agbara ibudo ti o dara / ipo agbara agbara.
  • Forukọsilẹ 0x02 jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x03 jẹ iforukọsilẹ COR; nigbati o ba ti ka, mejeeji awọn iforukọsilẹ, 0x02 ati 0x03, ti wa ni nso. Forukọsilẹ 0x10 (Ipo Agbara) pese ipo agbara gangan ti ibudo naa.
  • Bits 0…3 tọka si agbara mu ṣiṣẹ/mu iyipada kuro:
    • 0 = Ko si iyipada
    • 1 = Iyipada waye
      Bits 4… 7 tọka si iyipada ti o dara agbara
    • 0 = Ko si iyipada
    • 1 = Iyipada waye
      0x04 / 0x05 - Wiwa, Isọtọ, ati Awọn iṣẹlẹ Ṣayẹwo Asopọ
  • Awọn iforukọsilẹ meji wọnyi tọkasi awọn ayipada ninu Wiwa, Isọri, ati Asopọmọra Ṣayẹwo ipo Awọn iṣẹlẹ.
  • Forukọsilẹ 0x04 jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x05 jẹ iforukọsilẹ COR; nigbati o ba ti ka, mejeeji awọn iforukọsilẹ, 0x04 ati 0x05, ti wa ni nso.
  • Awọn iforukọsilẹ 0x4C si 0x54 pese alaye ni kikun nipa kilasi ti a beere, kilasi ti a yàn, ati ipo AutoClass.
  • Bits 0…3 tọka wiwa wiwa ati iyipada asopọ asopọ.
    • 0 = Wiwa ati ayẹwo asopọ ko ti pari sibẹsibẹ
    • 1 = Wiwa ati ayẹwo asopọ ti pari Awọn Bits 4… 7 tọka wiwa wiwa ati iyipada asopọ asopọ
    • 0 = Ipin-ipin ko ti pari sibẹsibẹ
    • 1 = A ti pari isọdi 0x06/0x07—Awọn iṣẹlẹ ti a kojọpọ/Apọju
  • Awọn iforukọsilẹ meji wọnyi tọkasi awọn ayipada ninu ipo ibudo nitori fifuye / ge asopọ tabi iṣẹlẹ apọju.
  • Forukọsilẹ 0x06 jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x07 jẹ iforukọsilẹ COR; nigba ti o ba ti wa ni ka, mejeeji forukọsilẹ 0x06 ati 0x07 nso.
  • Iwọn opin agbara ibudo ni a le ṣeto ni iforukọsilẹ 0x29.
  • Bits 0…3 tọkasi iṣẹlẹ ti apọju
    • 0 = Ko si iyipada
    • 1 = Agbara kuro lati awọn ibudo nitori apọju
  • Bits 4… 7 tọka si iṣẹlẹ ti isunmọ / PD ge asopọ/MPS
    • 0 = Ko si iyipada
    • 1 = Agbara ti yọkuro kuro ni awọn ebute oko nitori agbewọle/PD ge asopọ/MPS 0x08/0x09—Aṣiṣe-Agbara/Awọn iṣẹlẹ Idiwọn lọwọlọwọ
  • Awọn iforukọsilẹ meji wọnyi tọkasi awọn ayipada ninu ipo ibudo nitori aibikita agbara ibudo (iyẹn ni, inrush giga), ati nigbati ibudo ti ge-asopo nitori iṣẹlẹ opin lọwọlọwọ to gun ju lẹhinna.
  • TLIM tabi kukuru Circuit.
  • Forukọsilẹ 0x08 jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x09 jẹ iforukọsilẹ COR; nigba ti o ba ti wa ni ka, mejeeji forukọsilẹ 0x06 ati 0x07 nso.
  • Bits 0…3 tọkasi iṣẹlẹ ti ẹbi-soke
    • 0 = Ko si ẹbi
    • 1 = Agbara soke ẹbi lori ibudo
  • Bits 4… 7 tọka si iṣẹlẹ ti isunmọ / PD ge asopọ/MPS
    • 0 = Ko si ẹbi
    • 1 = A yọ agbara kuro ni awọn ibudo nitori iṣẹlẹ opin lọwọlọwọ / kukuru 0x0A/0x0B — Awọn iṣẹlẹ Ipese
  • Iforukọsilẹ Iṣẹ-ṣiṣe Awọn iforukọsilẹ meji wọnyi tọkasi awọn ikuna ni ipese agbara ti eto naa.
  • Kọọkan bit ṣe afihan ikuna kan.
  • Forukọsilẹ 0x0A jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x0B jẹ iforukọsilẹ COR; nigbati o ba ti ka, mejeeji awọn iforukọsilẹ, 0x06 ati 0x07, ti wa ni nso.
    Tabili ti o tẹle ṣe apejuwe ikuna ti o ni nkan ṣe pẹlu awọn iforukọsilẹ meji.

Table 3-2. Iṣẹlẹ Ikuna Ipese

Bit Iṣẹlẹ Oruko Iṣẹlẹ Apejuwe
0 NA Nigbagbogbo 0
1 OSS Iṣẹlẹ
  • 0 = Ko si iṣẹlẹ
  • 1 = Iṣẹlẹ kan ṣẹlẹ
  • (Reg 0x00, bit 2 tun ṣeto nitori iṣẹlẹ OSS)
2 4-Pair Port—Lori Iṣẹlẹ Agbara (Awọn ibudo 1 ati 2)
  • 0 = Ko si iṣẹlẹ
  • 1 = Lori agbara iṣẹlẹ waye (Reg 0x00, bit 5 tun ṣeto)
3 4-Pair Port—Lori Iṣẹlẹ Agbara (Awọn ibudo 3 ati 4)
  • 0 = Ko si iṣẹlẹ
  • 1 = Lori agbara iṣẹlẹ waye (Reg 0x00, bit 5 tun ṣeto)
4 VPATAKI ju kekere
  • 0 = Ko si iṣẹlẹ
  • 1 = VPATAKI ni isalẹ awọn kere ala
5 VDD ju kekere Ikilọ
  • 0 = Ko si iṣẹlẹ
  • 1 = VDD wa labẹ ala ikilọ to kere julọ (2.7 VDC)
6 VDD ju kekere ikuna
  • 0 = Ko si iṣẹlẹ
  • 1 = VDD wa labẹ ala ikuna ti o kere ju (2.4 VDC, PoE jẹ alaabo)
7 Lori iwọn otutu
  • 0 = Ko si iṣẹlẹ
  • 1 = Iwọn otutu ju eto lọ

Awọn iforukọsilẹ ipo (0x0C si 0x11)
Awọn iforukọsilẹ mẹrin wọnyi ti o pese ipo wiwa ibudo ni a ṣe atokọ ni Table 3-3, ati pe iyasọtọ ti a rii ni atokọ ni tabili 3-4. Awọn iforukọsilẹ wọnyi ni a ka nikan.

  • 0x0C: Ipo Wiwa Port 1/Ipinsi ti a rii
  • 0x0D: Ipo Iwari Port 2/Ipinsi ti a rii
  • 0x0E: Ipo Wiwa Port 3/Ipinsi ti a rii
  • 0x0F: Ipo Wiwa Port 3/Ipinsi ti a rii
  • Iforukọsilẹ kọọkan ti pin si awọn die-die fun ipo wiwa ati ipo kilasi ti o beere.

Table 3-3. Ipo Wiwa (Bits 0…3)

Iye Bin / Hex Ipo Wiwa
0000b/0x0 Aimọ: iye POR
0001b/0x1 Ayika kukuru
0010b/0x2 Ibudo ti gba agbara tẹlẹ
0011b/0x3 Resistor ti lọ silẹ pupọ
0100b/0x4 Wiwa IEEE® 802.3bt ti o wulo
0101b/0x5 Resistor ga ju
0110b/0x6 Ibudo wa ni sisi/ofo
0111b/0x7 Vol ti itatage ti wa ni ri lori ibudo
Iye Bin / Hex Ipo Wiwa
1110b/0x14 MOSFET_FAULT

Table 3-4. Ipo Kilasi ti a beere (Bits 4…7)

Iye Bin / Hex Ti beere Kilasi Ipo
0000b/0x0 Aimọ: iye POR
0001b/0x1 Kilasi 1
0010b/0x2 Kilasi 2
0011b/0x3 Kilasi 3
0100b/0x4 Kilasi 4
0101b/0x5 Ni ipamọ: Ti ṣe itọju bi kilasi 0
0110b/0x6 Kilasi 0
0111b/0x7 Ju lọwọlọwọ
1000b/0x8 Kilasi 5 4P SS
1001b/0x9 Kilasi 6 4P SS
1010b/0xA Kilasi 7 4P SS
1011b/0xB Kilasi 8 4P SS
1100b/0xC Kilasi 4 + (PSE ibudo ni opin si iru isuna agbara 1)
1101b/0xD Kilasi 5 4P DS
1110b/0xE Ni ipamọ
1111b/0xF Aiṣedeede isọri

Awọn akọsilẹ: 

  • SS = Nikan Ibuwọlu
  • DS = Meji Ibuwọlu

0x10-Ṣiṣe Agbara / Agbara Dara

  • Awọn Power Jeki bit (awọn die-die 0..3, a bit fun ibudo) ti ṣeto nigbati a ibudo wa ni agbara-soke ilana.
  • Iwọn Ipo Ti o dara Agbara (awọn die-die 4..7, diẹ fun ibudo) duro fun ibudo ifijiṣẹ agbara, lẹhin ti o ti wa ni titan ni aṣeyọri.
  • Iforukọsilẹ yii ni asopọ si awọn iforukọsilẹ iṣẹlẹ 0x02/0x03.
  • Awọn die-die 0… 3 Ṣiṣẹ agbara
  •  0 = Port ni ko si ni agbara-soke ilana
  • 1 = Ibudo wa ninu ilana agbara-soke
  • Bits 4…7 Agbara Dara
  • 0 = Ibudo wa ni pipa
  •  1 = Ibudo ti ni agbara ni aṣeyọri

0x11-I2C Ipo

  • Bits 3…6 pese iye awọn pinni A1…A4 (pins 48..51), eyiti o ṣeto adirẹsi I2C ti awọn quads mejeeji.

Awọn iforukọsilẹ Iṣeto (0x12 si 0x19 ati 0x27/0x28) 0x12—Ṣeto Ipo Isẹ ibudo

  • Iforukọsilẹ yii jẹ kika / kọ, lati ṣeto gbogbo awọn ebute oko oju omi mẹrin ni ibamu si Tabili 4-3. Kọọkan 5-bit ṣeto ibudo ni ibamu si Table 2-3:
    • Bits 0..1 ṣeto ibudo 1
    • Bits 2..3 ṣeto ibudo 2
    • Bits 4..5 ṣeto ibudo 3
    • Bits 6..7 ṣeto ibudo 4

Table 3-5. Ipo Isẹ Port

Port isẹ Ipo Apejuwe Iye
Pa a Eyikeyi iṣẹ-ṣiṣe Poe jẹ alaabo (iwari, iyasọtọ, agbara). 00b
Adase
  • PSE ti ṣiṣẹ.
  • Wiwa, isọdi, agbara-soke, ati agbara ti wa ni ipilẹṣẹ laifọwọyi.
 11b
  • 0x15-Port ayo
  • Iforukọsilẹ yii jẹ kika / kọ.
  • Awọn bits 0..3 yẹ ki o ṣeto si 0.
  • Bits 4..7 ṣeto ti ibudo naa ba ni ipa nipasẹ PIN OSS:
    • Bit 4 ṣeto ibudo 1
    • Bit 5 ṣeto ibudo 2
    • Bit 6 ṣeto ibudo 3
    • Bit 7 ṣeto ibudo 4
  • Nigbati a ba ṣeto bit si 0, ibudo naa ko ge nitori awọn iyipada ipele OSS. Nigbati bit ti ṣeto si 1, agbara ti ibudo naa yoo yọ kuro lakoko awọn iyipada OSS. 0x17-Mimọ
  • Yi Forukọsilẹ ti wa ni ka / kọ, nikan bit 4 yẹ ki o wa ṣeto.
  • Bit 4 ṣeto ipo OSS:
    • 0 = OSS mode jẹ kan nikan bit
    • 1 = OSS jẹ olona-bit
  • 0x19-Bọtini Titari Agbara
  • Iforukọsilẹ yii jẹ kika / kọ.
  • Awọn die-die 4..7 ti lo lati mu iṣẹ-ṣiṣe Poe ti awọn ibudo, bit fun ibudo. Lẹhin iyẹn ibudo naa yoo tẹsiwaju iṣẹ rẹ fun iforukọsilẹ 0x14
    • 0 = Ṣe ohunkohun.
    • 1 = Ibudo wa ni pipa fun igba diẹ. Lẹhin iṣe naa, bit yoo di mimọ ni inu. Lẹhin iṣe naa, bit yoo di mimọ ni inu.
  • Diẹ fun ibudo:
    • Bit 4 ṣeto ibudo 1
    • Bit 5 ṣeto ibudo 2
    • Bit 6 ṣeto ibudo 3
    • Bit 7 ṣeto ibudo 4

0x27 / 0x28-Multi-Bit ayo

  • Awọn iforukọsilẹ 2 wọnyi ni a ka / kọ, bit 4 nikan ni o yẹ ki o ṣeto, gbogbo awọn die-die miiran yẹ ki o wa ni pa bi ninu aiyipada.
  • Ninu iforukọsilẹ kọọkan, ayo ti awọn ebute oko oju omi meji le ṣeto, awọn ipele 8 ti ayo, lakoko ti o jẹ pataki 7 ni ayo ti o ga julọ, ati ni ayo 0 ni o kere julọ.
  • Forukọsilẹ 0x27 ṣeto ayo ti awọn ibudo 1, 2.
  • Forukọsilẹ 0x28 ṣeto awọn ibudo 3, 4.
  • Awọn iforukọsilẹ gbogbogbo (0x1B ati 0x1C)

0x1B-Ẹrọ ID ati Chip IC

  • Iforukọsilẹ yii jẹ kika nikan.
  • Iye iforukọsilẹ jẹ 0x2D (00101101b).

0x1C-Aifọwọyi Kilasi ati Abajade Ṣayẹwo Asopọ

  • Iforukọsilẹ yii jẹ kika nikan.
  • Bits 0…1 pese abajade ti iṣayẹwo asopọ ti ibudo 4-bata akọkọ (awọn ibudo 1 ati 2), fun Tabili 3-6.
  • Bits 2… 3 pese abajade ti iṣayẹwo asopọ ti ibudo 4-bata keji (awọn ibudo 3 ati 4), fun tabili 3-6.

Table 3-6. Abajade Ṣayẹwo Asopọmọra

Iye Abajade Ṣayẹwo Asopọmọra
0x0 Aimọ tabi pe.
0x1 4-bata nikan Ibuwọlu.
0x2 4-bata meji Ibuwọlu.
0x3 Ayẹwo asopọ ti ko tọ, tabi ibuwọlu ti ko tọ ti a rii lori ọkan ninu awọn akojọpọ bata.

Bits 4…7 Tọkasi ti PD ti a ti sopọ ba ṣe atilẹyin AutoClass:

  • 0 = PD ko ṣe atilẹyin AutoClass
  • 1 = PD ṣe atilẹyin AutoClass

A bit fun ibudo:

  • Bit 4 ṣeto ibudo 1
  • Bit 5 ṣeto ibudo 2
  • Bit 6 ṣeto ibudo 3
  •  Bit 7 ṣeto ibudo 4
    Akiyesi: Awọn Abajade awọn wiwọn AutoClass ni a ka ni awọn iforukọsilẹ 0x51 si 0x54.

Awọn iforukọsilẹ pataki (0x24 si 0x2F) 0x24/0x25—Agbara lori Aṣiṣe

  • Awọn iforukọsilẹ meji wọnyi tọka aṣiṣe lakoko agbara lori ọkọọkan (iṣawari, ipin, tabi agbara ti ko to).
  • Forukọsilẹ 0x24 jẹ iforukọsilẹ kika nikan.
  • Forukọsilẹ 0x25 jẹ iforukọsilẹ COR; nigba ti o ba ti wa ni ka, mejeeji forukọsilẹ 0x24 ati 0x25 nso.

Ibudo kọọkan jẹ aṣoju nipasẹ awọn ege meji, bi a ti rii ninu Table 2-3:

  • Bits 0..1 ṣe aṣoju ibudo 1
  • Bits 2..3 ṣe aṣoju ibudo 2
  • Bits 4..5 ṣe aṣoju ibudo 3
  • Bits 6..7 ṣe aṣoju ibudo 4

Table 3-7. Agbara lori Abajade aṣiṣe

Iye Agbara lori Apejuwe Ikuna
0x0 Ko si ikuna
0x1 Wiwa aitọ
0x2 Ipinsi aitọ
0x3 Agbara ti ko to

0x26-Matrix ibudo (Atunṣe)

  • Yi Forukọsilẹ ti wa ni kika / kọ, ti wa ni ti a ti pinnu tun-to awọn ibudo matrix otooto ju awọn aiyipada matrix (0xE4).
  • Ti iforukọsilẹ ko ba yipada nipasẹ olumulo, matrix ibudo aiyipada yoo han ni tabili 3-8.

Kọọkan ibudo ni ipoduduro nipasẹ 2 die-die:

  • Bits 0..1 ṣe aṣoju ibudo ọgbọn 1
  • Bits 2..3 ṣe aṣoju ibudo ọgbọn 2
  • Bits 4..5 ṣe aṣoju ibudo ọgbọn 3
  • Bits 6..7 ṣe aṣoju ibudo ọgbọn 4

Table 3-8. Aiyipada Port Matrix

Awọn die-die Iye Mogbonwa Port Ti ara Ibudo
0..1 0 (00b) 1 1
2..3 1 (01b) 2 2
4..5 2 (10b) 3 3
6..7 3 (11b) 4 4

0x2A/0x2B—4-Pair Police Configuration

  • Awọn iforukọsilẹ meji wọnyi ni a ka / kọ, lati ṣeto opin agbara ti awọn ebute oko oju omi (PCUT). Forukọsilẹ 0x2A ṣeto awọn ebute oko oju omi mẹrin-bata 4 ati 1.
  • Forukọsilẹ 0x2B ṣeto awọn ebute oko oju omi mẹrin-bata 4 ati 3.
  • Awọn wọnyi tabili awọn akojọ ti awọn agbara ipele ti 4-bata ibudo.
  • Iwọn agbara jẹ dogba si PCUT = 0.5 * Iye

Table 3-9. Iye owo ti PCUT

sọtọ Kilasi Iye Hex/Dec O kere ju PGEDE Eto (0x17 Bit 0 = 0) O kere ju PGEDE Eto (0x17 Bit 0 = 1)
Kilasi 0 0x22 (34d) 15.5W 17W
Kilasi 1 0x08 (8d) 4W 17W
Kilasi 2 0x0E (14d) 7W 17W
Kilasi 3 0x22 (34d) 15.5W 17W
Kilasi 4 0x40 (64d) 30W 32W
sọtọ Kilasi Iye Hex/Dec O kere ju PGEDE Eto (0x17 Bit 0 = 0) O kere ju PGEDE Eto(0x17 Bit 0 = 1)
Kilasi 5-4P SS 0x5A (90d) 45W 45W
Kilasi 6-4P SS 0x78 (120d) 60W 60W
Kilasi 7-4P SS 0x96 (150d) 75W 75W
Kilasi 8-4P SS 0xB4 (180d) 90W 90W
Kilasi 4+-Iru 1 lopin 0x22 (34d) 15.5W 17W
Eyikeyi 4P DS PD 0xB4 (180d) 90W 90W

0x2C-Chip otutu
Eyi jẹ iforukọsilẹ kika-nikan pese iwọn otutu ku, da lori agbekalẹ atẹle yii: 367 - {2 * (regVal_decimal)} (awọn iwọn Celsius)

0x2E/0x2F-VMAIN Idiwon

  • Awọn iforukọsilẹ meji wọnyi ni a ka nikan, ati pese ipele VMAIN nipasẹ awọn bit 14, pẹlu ipinnu ti 64.4 mV fun bit.
  • Iforukọsilẹ 0x2E duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x2F duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo.
  • O pọju iye le ti wa ni won 61V, VMAIN loke 61V ti wa ni royin bi 61V (0x3B3).
  • Example: VMAIN ti 55V ti pese bi 0x356 (55V/64.4 mV = 854).
  • Port Voltage ati Awọn iforukọsilẹ Iwọn Iwọn lọwọlọwọ (0x30 si 0x3F)
  • Iwọn naatage ati lọwọlọwọ ti ibudo kọọkan ni a pese nipasẹ awọn iforukọsilẹ mẹrin (meji fun ibudo voltage ati meji fun lọwọlọwọ).
  • Awọn iforukọsilẹ lọwọlọwọ meji fun ibudo pese ipele lọwọlọwọ nipasẹ awọn bit 14, pẹlu ipinnu ti 1 mA fun LSB. Iwọn ti o pọ julọ ti o le ṣe iwọn jẹ 1020 mA, lọwọlọwọ loke ipele yẹn ni a royin bi 1020 mA (0x3FC).
  • Awọn meji voltage awọn iforukọsilẹ fun ibudo pese voltage ipele nipasẹ 14 die-die, pẹlu ipinnu ti 64.4 mV fun LSB. Awọn ti o pọju iye le ti wa ni won 61V, voltage loke ipele yẹn jẹ ijabọ bi 61V (0x3B3).

0x30 / 0x31-Port 1 Iwọn Iwọn lọwọlọwọ

  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x32/0x33—Port 1 Voltage Idiwon
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x34 / 0x35-Port 2 Iwọn Iwọn lọwọlọwọ
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x36/0x37—Port 2 Voltage Idiwon
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo.

0x38 / 0x39-Port 3 Iwọn Iwọn lọwọlọwọ

  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x3A/0x3B—Port 3 Voltage Idiwon
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x3C / 0x3D-Port 4 Iwọn Iwọn lọwọlọwọ
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo. 0x3E/0x3F — Port 4 Voltage Idiwon
  • Iforukọsilẹ 0x30 duro fun awọn iwọn 8 LSB ti wiwọn.
  • Iforukọsilẹ 0x31 duro fun awọn ege MSB 6, awọn bit 6 ati 7 ti iforukọsilẹ yẹn ko lo.
  • Iforukọsilẹ Iṣakoso lọwọlọwọ Port Inrush (0x40)

0x40-Inrush Lọwọlọwọ Iṣakoso
Awọn die-die 0-3 nikan nṣiṣẹ, awọn die-die 4-7 ko lo.

Kọọkan bit ṣeto ibudo kan:

  • Bit 0 ṣeto ibudo 1
  • Bit 1 ṣeto ibudo 2
  • Bit 2 ṣeto ibudo 3
  • Bit 3 ṣeto ibudo 4
  • 0: Ti o ba ti ni opin ti awọn ibere-soke akoko inrush lọwọlọwọ jẹ ṣi ga, ibudo ko ni agbara soke.
  • 1: Ti o ba ti ni opin ti awọn ibere-soke akoko inrush lọwọlọwọ jẹ ṣi ga, ibudo ni agbara soke deede.
  • Ẹya Firmware ati Awọn iforukọsilẹ ID Chip (0x41 ati 0x43)

0x41 — Ẹya Firmware

  • Iforukọsilẹ yii jẹ kika nikan.
  • Fun ẹya tuntun julọ, kan si Microchip.
  • 0x43-Ẹya Silikoni ati Chip ID
  • Iforukọsilẹ yii jẹ kika nikan.
  • Bits 0…4 ṣe afihan ID ërún.
  • Bits 5…7 ṣe afihan ẹya silikoni.
  • Fun ẹya tuntun julọ, kan si Microchip.
  • Awọn iforukọsilẹ Iwọn Ibuwọlu Ibuwọlu (0x44 si 0x4B)

0x44–0x47—Atako Idiwọn Ibuwọlu

  • Awọn iforukọsilẹ mẹrin wọnyi ni a ka nikan, ati pese atako ti wọn niwọn lakoko wiwa Ibuwọlu.
  • Forukọsilẹ fun ibudo, 256Ω fun bit (480Ω fun kukuru, 65280Ω ti o pọju).
  • 0x48–0x4B—Iwọn Agbara Ibuwọlu
  • Ṣiṣe Iforukọsilẹ Awọn iforukọsilẹ mẹrin wọnyi ni a ka nikan, ati pese agbara ti wọn ni iwọn lakoko wiwa Ibuwọlu.
  • Forukọsilẹ fun ibudo, pẹlu ipinnu ti 64 nF fun bit.

Awọn iforukọsilẹ ipo Isọsọtọ ibudo (0x4C si 0x4F)
Awọn iforukọsilẹ mẹrin wọnyi ni a ka nikan ati pese kilasi ti PD ti o beere ati kilasi ti a yàn ti ibudo. Tabili ti o tẹle ṣe atokọ awọn iye mejeeji (beere ati sọtọ).

Table 3-10. Ti o beere ati Awọn iye ti a sọtọ

Iye ti Ti beere ati sọtọ Awọn die-die Kilasi Ipo
0 0 0 0 Aimọ
0 0 0 1 Kilasi 1
0 0 1 0 Kilasi 2
0 0 1 1 Kilasi 3
0 1 0 0 Kilasi 4
0 1 0 1 NA
0 1 1 0 Kilasi 0
0 1 1 1 NA
1 0 0 0 Kilasi 5-4-Pair SS
1 0 0 1 Kilasi 6-4Pair SS
1 0 1 0 Kilasi 7-4-Pair SS
1 0 1 1 Kilasi 8 - 4-Pair SS
1 1 0 0 NA
1 1 0 1 Kilasi 5-4-Pair DS
1 1 1 0 NA
1 1 1 1 NA

Awọn akọsilẹ: 

  • SS = Ibuwọlu Nikan; DS = Meji Ibuwọlu.
  • Ti PSE ba ni isuna agbara to lopin ati pe ko le fi agbara ti PD beere fun, kilasi ti a yàn fun ibudo le kere ju kilasi ti PD ti o beere.

0x4C-Port 1 Kilasi Ipo

  • Bits 0…3 pese kilasi ti PD ti o beere. Awọn die-die 4…7 pese kilasi ti a yàn fun ibudo naa. 0x4D-Port 2 Kilasi Ipo
  • Bits 0…3 pese kilasi ti PD ti o beere. Awọn die-die 4…7 pese kilasi ti a yàn fun ibudo naa. 0x4E-Port 3 Kilasi Ipo
  • Bits 0…3 pese kilasi ti PD ti o beere. Awọn die-die 4…7 pese kilasi ti a yàn fun ibudo naa. 0x4F-Port 4 Ipo Kilasi
  • Bits 0…3 pese kilasi ti PD ti o beere. Awọn die-die 4…7 pese kilasi ti a yàn fun ibudo naa.

 Awọn iforukọsilẹ Ipo Aifọwọyi (0x51 si 0x54)

  • Awọn iforukọsilẹ mẹrin wọnyi ni a ka nikan ati pese wiwọn AutoClass ati ipo.
  • Bits 0… 6 pese agbara ti a wọn lakoko AutoClass stage, pẹlu ipinnu ti 0.5W fun LSB. Bit 7 n pese ipo AutoClass:
  • 0 = A ko ṣe wiwọn.
  • 1 = Iwọn AutoClass ti pari. 0x51-Port 1 AutoClass Ipo
    • Bits 0…6 jẹ kilasi ti PD ti a beere.
    • Bit 7 jẹ ipo AutoClass.
  • 0x52-Port 2 AutoClass Ipo
    • Bits 0…6 jẹ kilasi ti PD ti a beere.
    • Bit 7 jẹ ipo AutoClass.
  • 0x53-Port 3 AutoClass Ipo
    • Bits 0…6 jẹ kilasi ti PD ti a beere.
    • Bit 7 jẹ ipo AutoClass.
  • 0x53-Port 3 AutoClass Ipo
    • Bits 0…6 jẹ kilasi ti PD ti a beere.
    • Bit 7 jẹ ipo AutoClass.

 Àtúnyẹwò History

Itan atunyẹwo ṣe apejuwe awọn iyipada ti a ṣe imuse ninu iwe-ipamọ naa. Awọn iyipada ti wa ni atokọ nipasẹ atunyẹwo, bẹrẹ pẹlu atẹjade lọwọlọwọ julọ.

Àtúnyẹwò Ọjọ Apejuwe
B 4/2023 Fi kun apakan 1. Automode Operational Flowchart ati olusin 1-1
A 04/2023 Atunyẹwo akọkọ

Microchip Alaye

  • Microchip naa Webojula
    Microchip pese atilẹyin ori ayelujara nipasẹ wa webojula ni www.microchip.com . Eyi webojula ti wa ni lo lati ṣe files ati alaye awọn iṣọrọ wa si awọn onibara. Diẹ ninu akoonu ti o wa pẹlu:
    •  Atilẹyin Ọja – Awọn iwe data ati errata, awọn akọsilẹ ohun elo ati sample eto, oniru oro, olumulo ká itọsọna ati hardware support awọn iwe aṣẹ, titun software tu ati ki o gbepamo software
    • Atilẹyin Imọ-ẹrọ Gbogbogbo - Awọn ibeere ti a beere nigbagbogbo (Awọn FAQ), awọn ibeere atilẹyin imọ-ẹrọ, awọn ẹgbẹ ijiroro lori ayelujara, atokọ awọn ọmọ ẹgbẹ eto alabaṣepọ apẹrẹ Microchip
    • Iṣowo ti Microchip - Aṣayan ọja ati awọn itọsọna aṣẹ, awọn idasilẹ atẹjade Microchip tuntun, atokọ ti awọn apejọ ati awọn iṣẹlẹ, awọn atokọ ti awọn ọfiisi tita Microchip, awọn olupin kaakiri ati awọn aṣoju ile-iṣẹ
  • Ọja Change iwifunni Service
  • Iṣẹ ifitonileti iyipada ọja Microchip ṣe iranlọwọ lati jẹ ki awọn alabara wa lọwọlọwọ lori awọn ọja Microchip. Awọn alabapin yoo gba ifitonileti imeeli nigbakugba ti awọn ayipada ba wa, awọn imudojuiwọn, awọn atunyẹwo tabi errata ti o ni ibatan si ẹbi ọja kan tabi ohun elo idagbasoke ti iwulo.
  • Lati forukọsilẹ, lọ si www.microchip.com/pcn ki o si tẹle awọn ilana ìforúkọsílẹ.
  • Onibara Support
  • Awọn olumulo ti awọn ọja Microchip le gba iranlọwọ nipasẹ awọn ikanni pupọ:
    • Olupin tabi Aṣoju
    • Agbegbe Sales Office
    • Onimọ-ẹrọ Awọn ojutu ti a fi sii (ESE)
    • Oluranlowo lati tun nkan se
  • Awọn onibara yẹ ki o kan si olupin wọn, aṣoju tabi ESE fun atilẹyin. Awọn ọfiisi tita agbegbe tun wa lati ṣe iranlọwọ fun awọn alabara. Atokọ ti awọn ọfiisi tita ati awọn ipo wa ninu iwe yii.
  • Imọ support wa nipasẹ awọn webojula ni: www.microchip.com/support
  • Ẹya Idaabobo koodu Awọn ẹrọ Microchip
  • Ṣe akiyesi awọn alaye atẹle ti ẹya aabo koodu lori awọn ọja Microchip:
    • Awọn ọja Microchip pade awọn pato ti o wa ninu Iwe Data Microchip pato wọn.
    • Microchip gbagbọ pe ẹbi ti awọn ọja wa ni aabo nigba lilo ni ọna ti a pinnu, laarin awọn pato iṣẹ, ati labẹ awọn ipo deede.
    • Awọn iye Microchip ati ibinu ṣe aabo awọn ẹtọ ohun-ini ọgbọn rẹ. Awọn igbiyanju lati irufin awọn ẹya aabo koodu ti ọja Microchip jẹ eewọ muna ati pe o le rú Ofin Aṣẹ-lori Ẹgbẹrun Ọdun Digital.
    • Bẹni Microchip tabi eyikeyi olupese semikondokito miiran le ṣe iṣeduro aabo koodu rẹ. Idaabobo koodu ko tumọ si pe a n ṣe iṣeduro ọja naa jẹ “aibikita”. Idaabobo koodu ti wa ni idagbasoke nigbagbogbo. Microchip ti pinnu lati ni ilọsiwaju nigbagbogbo awọn ẹya aabo koodu ti awọn ọja wa.
  • Ofin Akiyesi
  • Atẹjade yii ati alaye ti o wa ninu rẹ le ṣee lo pẹlu awọn ọja Microchip nikan, pẹlu lati ṣe apẹrẹ, idanwo, ati ṣepọ awọn ọja Microchip pẹlu ohun elo rẹ. Lilo alaye yii ni ọna miiran ti o lodi si awọn ofin wọnyi. Alaye nipa awọn ohun elo ẹrọ ti pese fun irọrun rẹ nikan ati pe o le rọpo nipasẹ awọn imudojuiwọn. O jẹ ojuṣe rẹ lati rii daju pe ohun elo rẹ ni ibamu pẹlu awọn pato rẹ. Kan si ọfiisi tita Microchip agbegbe rẹ fun atilẹyin afikun tabi, gba atilẹyin afikun ni www.microchip.com/en-us/support/design-help/client-support-services.
  • ALAYE YI NI MICROCHIP “BI O SE WA”. MICROCHIP KO SE Aṣoju TABI ATILẸYIN ỌJA TI IRU KANKAN BOYA KIAKIA TABI TỌRỌ, KỌ TABI ẹnu, Ilana tabi Bibẹkọkọ, ti o jọmọ ALAYE NAA SUGBON KO NI LOPIN SI KANKAN, LATI IKILỌ ỌRỌ, ÀTI IFỌRỌWỌRỌ FUN IDI PATAKI, TABI ATILẸYIN ỌJA TO JEmọ MAJEMU, Didara, TABI Iṣe Rẹ.
  • LAISI iṣẹlẹ ti yoo jẹ oniduro fun eyikeyi taara, PATAKI, ijiya, isẹlẹ, tabi Abajade isonu, bibajẹ, iye owo, tabi inawo ti eyikeyi iru ohunkohun ti o jọmọ si awọn alaye tabi anfani ti o, TI THE SEESE TABI AWỌN IBAJE AWỌN NIPA. SI NIPA NIPA NIPA NIPA TI OFIN, LAPAPA LAPAPO MICROCHIP LORI GBOGBO awọn ẹtọ ni ọna eyikeyi ti o jọmọ ALAYE TABI
  • LILO RE KO NI JU OPO OWO, TI O BA KAN, TI O TI SAN TARA SI MIROCHIP FUN ALAYE.
  • Lilo awọn ẹrọ Microchip ni atilẹyin igbesi aye ati/tabi awọn ohun elo aabo jẹ patapata ni ewu olura, ati pe olura gba lati daabobo, ṣe idalẹbi ati dimu Microchip ti ko lewu lati eyikeyi ati gbogbo awọn bibajẹ, awọn ẹtọ, awọn ipele, tabi awọn inawo ti o waye lati iru lilo. Ko si awọn iwe-aṣẹ ti a gbe lọ, laisọtọ tabi bibẹẹkọ, labẹ eyikeyi awọn ẹtọ ohun-ini imọ Microchip ayafi bibẹẹkọ ti sọ.

Awọn aami-išowo

  • Orukọ Microchip ati aami, aami Microchip, Adaptec, AVR, AVR logo, AVR Freaks, BestTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXSty MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, logo PIC32, PolarFire, Prochip Designer, QTouch, SAM-BA, Segenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ati XMEGA jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran.
  • AgileSwitch, APT, ClockWorks, Ile-iṣẹ Awọn Solusan Iṣakoso ti a fi sinu, EtherSynch, Flashtec, Iṣakoso Iyara Hyper, Load HyperLight, Libero, motorBench, mTouch, Powermite 3, Edge Precision, ProASIC, ProASIC Plus, ProASIC Plus logo, Idakẹjẹ- Waya, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ati ZL jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA
  • Imukuro Bọtini nitosi, AKS, Analog-fun-The-Digital Age, Eyikeyi Kapasito, AnyIn, AnyOut, Yipada Augmented, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM Average, Matching Nẹtiwọọki. , DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Asopọmọra, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB aami ifọwọsi, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, GIDI ICE, Ripple Blocker, RTAX , RTG4, SAM- ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Lapapọ Ifarada, Aago Gbẹkẹle, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ati ZENA jẹ aami-iṣowo ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran.
  • SQTP jẹ aami iṣẹ ti Microchip Technology Incorporated ni AMẸRIKA
  • Aami Adaptec, Igbohunsafẹfẹ lori Ibeere, Imọ-ẹrọ Ibi ipamọ Silicon, ati Symmcom jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Inc. ni awọn orilẹ-ede miiran.
  • GestIC jẹ aami-iṣowo ti a forukọsilẹ ti Microchip Technology Germany II GmbH & Co.KG, oniranlọwọ ti Microchip Technology Inc., ni awọn orilẹ-ede miiran.
  • Gbogbo awọn aami-iṣowo miiran ti a mẹnuba ninu rẹ jẹ ohun-ini ti awọn ile-iṣẹ wọn. © 2023, Microchip Technology Incorporated ati awọn ẹka rẹ. Gbogbo awọn ẹtọ wa ni ipamọ.
  • ISBN: 978-1-6683-2380-9
  • Didara Management System
  • Fun alaye nipa Awọn ọna iṣakoso Didara Microchip, jọwọ ṣabẹwo www.microchip.com/quality.

Ni agbaye Titaja ati Service

AMERIKA

ASIA/PACIFIC

  • Australia – Sydney
  • Tẹli: 61-2-9868-6733
  • Ilu China - Ilu Beijing
  • Tẹli: 86-10-8569-7000
  • China – Chengdu
  • Tẹli: 86-28-8665-5511
  • China – Chongqing
  • Tẹli: 86-23-8980-9588
  • China – Dongguan
  • Tẹli: 86-769-8702-9880
  • China – Guangzhou
  • Tẹli: 86-20-8755-8029
  • China – Hangzhou
  • Tẹli: 86-571-8792-8115
  • China – Hong Kong SAR
  • Tẹli: 852-2943-5100
  • China – Nanjing
  • Tẹli: 86-25-8473-2460
  • China – Qingdao
  • Tẹli: 86-532-8502-7355
  • China – Shanghai
  • Tẹli: 86-21-3326-8000
  • China - Shenyang
  • Tẹli: 86-24-2334-2829
  • China – Shenzhen
  • Tẹli: 86-755-8864-2200
  • China – Suzhou
  • Tẹli: 86-186-6233-1526
  • China – Wuhan
  • Tẹli: 86-27-5980-5300
  • China – Xian
  • Tẹli: 86-29-8833-7252
  • China – Xiamen
  • Tẹli: 86-592-2388138
  • China – Zhuhai
  • Tẹli: 86-756-3210040
  • India – Bangalore
  • Tẹli: 91-80-3090-4444
  • India – New Delhi
  • Tẹli: 91-11-4160-8631
  • India - Pune
  • Tẹli: 91-20-4121-0141
  • Japan - Osaka
  • Tẹli: 81-6-6152-7160
  • Japan – Tokyo
  • Tẹli: 81-3-6880-3770
  • Koria – Daegu
  • Tẹli: 82-53-744-4301
  • Korea – Seoul
  • Tẹli: 82-2-554-7200
  • Malaysia – Kuala Lumpur
  • Tẹli: 60-3-7651-7906
  • Malaysia - Penang
  • Tẹli: 60-4-227-8870
  • Philippines – Manila
  • Tẹli: 63-2-634-9065
  • Singapore
  • Tẹli: 65-6334-8870
  • Taiwan – Hsin Chu
  • Tẹli: 886-3-577-8366
  • Taiwan – Kaohsiung
  • Tẹli: 886-7-213-7830
  • Taiwan – Taipei
  • Tẹli: 886-2-2508-8600
  • Thailand - Bangkok
  • Tẹli: 66-2-694-1351
  • Vietnam - Ho Chi Minh
  • Tẹli: 84-28-5448-2100

EUROPE

  • Austria – Wels
  • Tẹli: 43-7242-2244-39
  • Faksi: 43-7242-2244-393
  • Denmark – Copenhagen
  • Tẹli: 45-4485-5910
  • Faksi: 45-4485-2829
  • Finland – Espoo
  • Tẹli: 358-9-4520-820
  • Faranse - Paris
  • Tel: 33-1-69-53-63-20
  • Fax: 33-1-69-30-90-79
  • Jẹmánì – Garching
  • Tẹli: 49-8931-9700
  • Jẹmánì – Haan
  • Tẹli: 49-2129-3766400
  • Jẹmánì – Heilbronn
  • Tẹli: 49-7131-72400
  • Jẹmánì – Karlsruhe
  • Tẹli: 49-721-625370
  • Jẹmánì – München
  • Tel: 49-89-627-144-0
  • Fax: 49-89-627-144-44
  • Jẹmánì – Rosenheim
  • Tẹli: 49-8031-354-560
  • Israeli - Ra'anana
  • Tẹli: 972-9-744-7705
  • Italy – Milan
  • Tẹli: 39-0331-742611
  • Faksi: 39-0331-466781
  • Italy – Padova
  • Tẹli: 39-049-7625286
  • Netherlands - Drunen
  • Tẹli: 31-416-690399
  • Faksi: 31-416-690340
  • Norway – Trondheim
  • Tẹli: 47-72884388
  • Poland - Warsaw
  • Tẹli: 48-22-3325737
  • Romania - Bucharest
  • Tel: 40-21-407-87-50
  • Spain – Madrid
  • Tel: 34-91-708-08-90
  • Fax: 34-91-708-08-91
  • Sweden – Gothenberg
  • Tel: 46-31-704-60-40
  • Sweden – Dubai
  • Tẹli: 46-8-5090-4654
  • UK – Wokingham
  • Tẹli: 44-118-921-5800
  • Faksi: 44-118-921-5820

Itọsọna olumulo
© 2023 Microchip Technology Inc. ati awọn ẹka rẹ

Awọn iwe aṣẹ / Awọn orisun

MICROCHIP PD77728 Ipo Aifọwọyi Forukọsilẹ Map [pdf] Ilana itọnisọna
DS00004761B.

Awọn itọkasi

jẹmọ Posts

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *