Litaba pata
1 MICROCHIP PD77728 Auto Mode Register Map
2 Litaelo tsa Tšebeliso ea Sehlahisoa
3 Selelekela
4 Ngodisa tshebetso
5 Nalane ea Phetoho
6 Boitsebiso ba Microchip
7 Lithekiso le Tšebeletso ea Lefatše Lohle
8 Litokomane / Lisebelisoa
8.1 Litšupiso
9 Related Posts

MICROCHIP-letšoao

MICROCHIP PD77728 Auto Mode Register Map

MICROCHIP-PD77728-Auto-Mode-Ngolisa-Mapa-sehlahisoa-setšoantšo

Litlhaloso tsa Sehlahisoa

  • Mohlala: PD77728
  • Mokhoa: Auto
  • Ngolisa 'mapa: E kenyelelitsoe

Litaelo tsa Tšebeliso ea Sehlahisoa

Automode Operational Flowchart
Automode Operational Flowchart e fana ka tataiso ea mohato ka mohato bakeng sa ho sebelisa 'mapa oa ngoliso oa PD77728:

  1. Qala tshebetso.
  2. Etsa Litlhophiso tsa Pele (ka boikhethelo) ka ho lokisa maske a Tšitiso (0x01), Bohlokoa ba Boema-kepe (0x15), Mescellaneous(0x17), 'mapa oa Boema-kepe (0x26), bohlokoa ba li-port tsa OSS tse ngata (0x27, 0x28), Moedi oa matla a Koung (0x2A, 0x2B ), le Adjustable Inrush (0x40).
  3. Sheba hore na Setting ea Pele e phethiloe.
  4. Haeba YES, fetela ho Setting ea Boemo ba Boema-kepe ka ho hlophisa mokhoa oa Boema-kepe (0x12) le konopo ea Power Enable (0x19).
  5. Haeba CHE, hlahloba hore na Interrupt Pin e tlase.
  6. Haeba EE, bala rejisetara e etsahetseng (0x00) le lirejistara tse tsamaellanang le Liketsahalo (0x02-0x0B).
  7. Sheba hore na Boema-kepe bo ON.
  8. Haeba YES, bala Li-Parameters tsa Litekanyo tsa Boema-kepe: Moqtage & Current (0x30-0x3F), IEEE Signature Parameters (0x44-0x4B), Classification Parameters (0x4C- 0x4F), le Autoclass Parameters (0x51-0x54)
  9. Qetella mokhoa.

Ngolisa Lintlha tsa 'Mapa
Lintlha tsa 'mapa oa ngoliso ea sesebelisoa sa PD77728 li thathamisitsoe litafoleng tse fapaneng:

  1. Litšitiso (Letlapa la 2-1)
  2. Ketsahalo (Lethathamo la 2-2)
  3. Boemo (Lethathamo la 2-3)

Lipotso tse atisang ho botsoa (FAQ)

  • Q: Ke likarolo life tse ka sehloohong tsa 'mapa oa ngoliso ea PD77728 Auto Mode?
    A: Likarolo tsa mantlha li kenyelletsa lirejisetara tsa Litšitiso, Liketsahalo, le Maemo joalo ka ha ho hlalositsoe litafoleng tsa 'mapa oa ngoliso.
  • P: Ke hlophisa joang Setlhophiso sa Mokhoa oa Boema-kepe ho Automode Operational Flowchart?
    A: U ka lokisa Boemo ba Boema-kepe ka ho beha mokhoa oa Boema-kepe (0x12) le Power Enable pushbutton (0x19) ho latela litaelo tse fanoeng.

PD77728 Auto Mode Register Map

Selelekela

Tokomane ena e hlalosa 'mapa oa ngoliso ea PD77728 le ts'ebetso ea ngoliso. Mokhoa oa puisano oa PD77728 o thehiloe ho I2C, o sebelisa phihlello ea ngoliso joalo ka ha ho bonts'itsoe Setšoantšong sa 1. PD77728 ka 'ngoe e kenyelletsa liaterese tse peli tse latellanang tsa I2C (aterese e le 'ngoe ea I2C e laola likou tsa 4 tsa lipara tsa 2). Liaterese tse peli tsa I2C li behiloe ka li-pins A1–A4, 'me aterese ka 'ngoe ke li-bits tse 7. Sesebelisoa sa PD77728 ha se hloke tšehetso ea oache ho tsoa ho moamoheli. Sheba karolo ea I2C ho PD77728 Datasheet ho hlophisa aterese ea I2C.
Setšoantšo sa 1. Litšebelisano tsa I2CMICROCHIP-PD77728-Auto-Mode-Register-Mapa- (1)

  1. Automode Operational Flowchart
    Setšoantšo se latelang se bonts'a Automode Operational Flowchart ea 'mapa oa ngoliso oa PD77728.
    Setšoantšo sa 1-1. Automode Operational FlowchartMICROCHIP-PD77728-Auto-Mode-Register-Mapa- (2) MICROCHIP-PD77728-Auto-Mode-Register-Mapa- (3) MICROCHIP-PD77728-Auto-Mode-Register-Mapa- (4)
  2. Ngolisa 'mapa
    Litafole tse latelang li thathamisa lintlha tsa 'mapa oa ngoliso ea sesebelisoa sa PD77728.

Lethathamo la 2-1. E sitisa

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x00 Thibela RO Tsamaiso Ketsahalo ea Phepelo Qala Phoso Tse ngata haholo Sehlopha se Entswe I2C

SR/ Cap Meas

 Disco tse nnè Pwr e ntle

Ketsahalo

 Pwr Nolofatsa

Ketsahalo

 1000,

0000b
0x01 Int

Mask

 R/W Tsamaiso Mask 1000,

0000b

Lethathamo la 2-2. Ketsahalo

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta bocha Naha
0x02 Matla RO 4321 Matla Phetoho e Ntle Matla a nolofalletsa Phetoho 0000,0

000b
0x03 CoR Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x04 Ho lemoha/

Karolelano

 RO 4321 Sehlopha se Entswe Fumana/CC E entsoe 0000,0

000b
0x05 CoR Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x06 Phoso RO 4321 Tlase Tse ngata haholo 0000,0

000b
0x07 CoR Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x08 Qala RO 4321 Phoso ea Hona Joale ea Moeli Matlafatsa Phoso 0000,0

000b
0x09 CoR Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x0A Phepelo RO 4321 Ho feta Temp VDD UVLO

Ho hloleha

 VDD UVLO

Tlhokomediso

 Vpwr UVLO PCUT34 Setšoantšo sa PCUT1 OSS

Ketsahalo

 RAM

Phoso

 00xx,0 000b
0x0B CoR

Lethathamo la 2-3. Boemo

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta bocha Naha
0x0C Fumana/ Sehlopha

Boemo

 RO 1 Sehlopha se Nnoeng (sheba Lethathamo la 3-8) Boemo ba ho Fumana (sheba Lethathamo la 3-7) 0000,00

00b
0x0D Fumana/ Sehlopha

Boemo

 RO 2 0000,00

00b
0x0E Fumana/ Sehlopha

Boemo

 RO 3 0000,00

00b
0x0F Fumana/ Sehlopha

Boemo

 RO 4 0000,00

00b
0x10 Matla RO 4321 Matla a Molemo Matla a nolofalletsa 0000,00

00b
Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x11 Pin RO Tsamaiso MOSEBETSI Aterese ea Moreki Reserved Reserved 0,SA[4:0],0,0b

Lethathamo la 2-4. Tlhophiso

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta bocha Naha
0x12 Boema-kepe

Mokhoa

 R/W 4321 Mokhoa oa Port 4 (sheba Lethathamo la 3-9) Mokhoa oa Port 3 (sheba Lethathamo la 3-9) Mokhoa oa Port 2 (sheba Lethathamo la 3-9) Mokhoa oa Port 1 (sheba Lethathamo la 3-9) 0000,00 00b
0x15 PWRPR R/W 4321 Matla a Boema-kepe a Pele Tlosa PCUT 0000,00

00b
Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x17 Tse ling R/W Lefatšeng ka bophara Thibela Pin Noble Tekanyo ea Port Sig Reserved Multi-Bit

Ea pele

 Fetola Reserved 0x29

Boitšoaro

 1100,00

00b
TLELASE FUMANA
0x19 Matla

Thusa

 WO 4321 Matla Off Matla On 0000,00

00b
Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1

Lethathamo la 2-5. Kakaretso

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta bocha Naha
0x1B ID RO Tsamaiso ID ea Moetsi IC ID xxxx,x101b (Tlhokomeliso 1)
0x1C AC/CC RO 4321 AutoClass e fumanoe Khokahano Hlahloba Liphetho 0000,0000b
Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 Boema-kepe ba 3, 4 Boema-kepe ba 1, 2
  • Hlokomela:
  • 1. x = Boleng bo sa tsejoeng
  • Lethathamo la 2-6. Tse khethehileng
Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x24 Matla ho Phoso RO 4321 Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1 0000,0000b
0x25 KOR 0000,0000b
0x26 Ports Matrix R/W 4321 Port 4 remap Port 3 remap Port 2 remap Port 1 remap 1110,0100b
0x27 Ntho ea Pele ea Matla a Multi-Bit R/W 21 Resv Boema-kepe ba 2 Resv Boema-kepe ba 1 0000,0000b
0x28 R/W 43 Resv Boema-kepe ba 4 Resv Boema-kepe ba 3 0000,0000b
0x2A 4P Sepolesa Config R/W 21 4P Boema-kepe ba Sepolesa 1, 2 1111,1111b
0x2B R/W 43 4P Boema-kepe ba Sepolesa 3, 4 1111,1111b
0x2C Nako. RO 4321 Die Temperature 367 − 2 * (regVal_decimal) (di degree Celsius) —
0x2E VPWR RO 4321 VPWR LSB —
0x2F RO Reserved VPWR MSB —

Lethathamo la 2-7. Sete e Atolositsoeng ea Ngoliso - Tekanyo ea Port Parametric

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x30 Ke-LSB RO 1 Boema-kepe ba 1 LSB ea hajoale 0000,0000b
0x31 Ke-MSB RO 1 Reserved Boema-kepe ba 1 MSB ea hajoale 0000,0000b
0x32 V-LSB RO 1 Boema-kepe ba 1 Moqtagle LSB 0000,0000b
0x33 V-MSB RO 1 Reserved Boema-kepe ba 1 Moqtagle MSB 0000,0000b
0x34 Ke-LSB RO 2 Boema-kepe ba 2 LSB ea hajoale 0000,0000b
0x35 Ke-MSB RO 2 Reserved Boema-kepe ba 2 MSB ea hajoale 0000,0000b
0x36 V-LSB RO 2 Boema-kepe ba 2 Moqtagle LSB 0000,0000b
0x37 V-MSB RO 2 Reserved Boema-kepe ba 2 Moqtagle MSB 0000,0000b
0x38 Ke-LSB RO 2 Boema-kepe ba 3 LSB ea hajoale 0000,0000b
Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x39 Ke-MSB RO 2 Reserved Boema-kepe ba 3 MSB ea hajoale 0000,0000b
0x3A V-LSB RO 2 Boema-kepe ba 3 Moqtagle LSB 0000,0000b
0x3B V-MSB RO 2 Reserved Boema-kepe ba 3 Moqtagle MSB 0000,0000b
0x3C Ke-LSB RO 2 Boema-kepe ba 4 LSB ea hajoale 0000,0000b
0x3D Ke-MSB RO 2 Reserved Boema-kepe ba 4 MSB ea hajoale 0000,0000b
0x3E V-LSB RO 2 Boema-kepe ba 4 Moqtagle LSB 0000,0000b
0x3F V-MSB RO 2 Reserved Boema-kepe ba 4 Moqtagle MSB 0000,0000b

Lethathamo la 2-8. Sete e Atolositsoeng ea Ngoliso-Setlhophiso 1

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x40 Foldback le Inrush RW 4321 Ha e Sebediswe Inrush e ka fetoloang 0000,0000b
Boema-kepe ba 4 Boema-kepe ba 3 Boema-kepe ba 2 Boema-kepe ba 1
0x41 Firmware RO Tsamaiso Ntlafatso ea Firmware xxxx,xxxxb (Tlhokomeliso 1)
0x43 ID ea sesebelisoa RO Tsamaiso ID ea sesebelisoa Ntlafatso ea silicon Ikopanye le Microchip bakeng sa firmware e ntlafalitsoeng ka ho fetesisa.
  • Hlokomela:
  • 1. x = Phapang e sa tsejoeng
  • Lethathamo la 2-9. Litekanyo tsa Signature ea Port
Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x44 Lemoha Khanyetso RO 4 Boema-kepe ba 1 Bohanyetsi ba Signature 0000,0000b
0x45 Lemoha Khanyetso RO 3 Boema-kepe ba 2 Bohanyetsi ba Signature 0000,0000b
0x46 Lemoha Khanyetso RO 2 Boema-kepe ba 3 Bohanyetsi ba Signature 0000,0000b
0x47 Lemoha Khanyetso RO 1 Boema-kepe ba 4 Bohanyetsi ba Signature 0000,0000b
0x48 Lemoha Khanyetso RO 4 Bokhoni ba ho Khetholla Signature ea Port 1 0000,0000b
0x49 Lemoha Khanyetso RO 3 Bokhoni ba ho Khetholla Signature ea Port 2 0000,0000b
0x4A Lemoha Khanyetso RO 2 Bokhoni ba ho Khetholla Signature ea Port 3 0000,0000b
0x4B Lemoha Khanyetso RO 1 Bokhoni ba ho Khetholla Signature ea Port 4 0000,0000b

Lethathamo la 2-10. Boemo ba Sehlopha se Abeloeng

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x4C Sehlopha se abetsoeng RO 1 Sebaka se abetsoeng sa Sehlopha sa 1 Kopo ea Class Port 1 0000,0000b
0x4D RO 2 Sebaka se abetsoeng sa Sehlopha sa 2 Kopo ea Class Port 2 0000,0000b
0x4E RO 3 Sebaka se abetsoeng sa Sehlopha sa 3 Kopo ea Class Port 3 0000,0000b
0x4F RO 4 Sebaka se abetsoeng sa Sehlopha sa 4 Kopo ea Class Port 4 0000,0000b

Lethathamo la 2-11. AutoClass Configuration le Boemo

Aterese Lebitso R/W Mofuta hanyane 7 hanyane 6 hanyane 5 hanyane 4 hanyane 3 hanyane 2 hanyane 1 hanyane 0 Seta Naha bocha
0x51 Matla a AutoClass RO 1 E felile E baloang AutoClass Power Port 1 0000,0000b
0x52 RO 2 E felile E baloang AutoClass Power Port 2 0000,0000b
0x53 RO 3 E felile E baloang AutoClass Power Port 3 0000,0000b
0x54 RO 4 E felile E baloang AutoClass Power Port 4 0000,0000b

Ngodisa tshebetso

Aterese ea rejisetara e 'ngoe le e' ngoe e emela li-byte tsa data.
Rejista e na le mefuta e latelang:

  • RO: Bala feela, ngoliso ena e ka baloa ke moamoheli (rejisetara ena e ke ke ea beoa ke moamoheli).
  • R/W: Bala/Ngola, rejisetara ena e ka baloa le ho beoa ke moamoheli.
  • COR: Hlakola On Read, ngoliso ena e ka baloa feela ke moamoheli (hang ha e baloa, boleng ba eona bo khutlisoa).
  • Mofuta:
    • Sistimi: Rejisetara e emela ts'ebetso ea aterese eohle ea I2C, e hokahaneng le ngoliso ena.
    • Boema-kepe: Rejisetara e emetse ts'ebetso ea boema-kepe kapa likou tse 'maloa, nomoro ea boema-kepe e amanang e ngotsoe ka seleng.

Lingoliloeng tsa Ketsahalo (0x00 ho 0x0B) 0x00—Ketsahalo e sitisang

  • Karolo e 'ngoe le e' ngoe e emela ketsahalo ea tsamaiso. Ha karoloana e lekana le 1, e bontša hore ketsahalo e etsahetse.
  • Lethathamo le latelang le thathamisa liketsahalo tse amanang le rejisetara.
  • Lethathamo la 3-1. Ketsahalo ea Tsamaiso
Bit Ketsahalo Lebitso Tlhaloso ea Ketsahalo
0 Matla a nolofalletsa Boema-kepe bo qalile potoloho ea matlafatso.
1 Matla a Molemo Boema-kepe bo qetile matla-up stage mme e fana ka matla.
2 Hakolla Boema-kepe bo faneng ka matla bo tlohile ho tloha ho ON ho ea ho OFF.
3 I2C Bus Soft Reset/Legacy Furction Ready Bese ea I2C, 50 ms timeout ho tloha Start to Stop condition IEEE® ho hloleha ha ho fumanwa mme ho seta botjha ho fumanwa ho se ho loketse ho balwa.
4 Classification E entsoe Classification le AutoClass e phethiloe
5 Tse ngata haholo Ketsahalo e fetelletseng kapa ea hajoale ea moeli
6 Bothata ba ho Qala Inrush current e phahame haholo kapa kabo ea motlakase e sa lekaneng
7 Phepelo Ho hloleha ho amana le phepelo ea sistimi
  • 0x01 - Thibela Mask
  • Karolo e 'ngoe le e' ngoe e emela maske ketsahalong ea sistimi, e hlalositsoeng ho registara 0x00.
  • Ha hanyane e behiloe ke moamoheli ho 1, ketsahalo e tlalehoa ka karolo e lekanyelitsoeng ea ngoliso 0x00. 0x02/0x03—Liketsahalo tsa Matla
  • Lirekoto tsena tse peli li bonts'a phetoho efe kapa efe ea matla a boema-kepe a matle / matla a nolofalletsang boemo.
  • Ngoliso ea 0x02 ke ngoliso ea ho bala feela.
  • Ngoliso 0x03 ke rejisetara ea COR; ha e baloa, lirejisetara ka bobeli, 0x02 le 0x03, lia hlakoloa. Ngoliso ea 0x10 (Maemo a Matla) e fana ka boemo ba 'nete ba matla a boema-kepe.
  • Bits 0…3 e bonts'a matla a nolofalletsang / tima phetoho:
    • 0 = Ha ho phetoho
    • 1 = Phetoho e etsahetse
      Bits 4…7 e bonts'a phetoho e ntle ea matla
    • 0 = Ha ho phetoho
    • 1 = Phetoho e etsahetse
      0x04/0x05—Tlhahiso, Khethollo, le Liketsahalo tsa Tlhahlobo ea Khokahano
  • Lingoliloeng tsena tse peli li bonts'a liphetoho maemong a Detection, Classification, le Connection Check Events.
  • Ngoliso ea 0x04 ke ngoliso ea ho bala feela.
  • Ngoliso 0x05 ke rejisetara ea COR; ha e baloa, lirejisetara ka bobeli, 0x04 le 0x05, lia hlakoloa.
  • Lirekoto tsa 0x4C ho isa ho 0x54 li fana ka leseli le felletseng mabapi le sehlopha se kopiloeng, sehlopha se abetsoeng, le boemo ba AutoClass.
  • Bits 0…3 e bonts'a phumano le phetoho ea tlhahlobo ea khokahano.
    • 0 = Tlhahlobo le tlhahlobo ea khokahano ha e so phetheloe
    • 1 = Ho lemoha le ho hlahloba ho amana ho phethiloe Bits 4 ... 7 e bonts'a ho lemoha le phetoho ea ho hlahloba khokahanyo
    • 0 = Sehlopha ha se so phethehe
    • 1 = Sehlopha se phethiloe 0x06/0x07—Liketsahalo tsa Tlase
  • Lirekoto tsena tse peli li bonts'a liphetoho maemong a boema-kepe ka lebaka la ho laeloa / ho khaoha kapa ketsahalo e ngata haholo.
  • Ngoliso ea 0x06 ke ngoliso ea ho bala feela.
  • Ngoliso 0x07 ke rejisetara ea COR; ha e baloa, lirejistara ka bobeli 0x06 le 0x07 lia hlakoloa.
  • Boleng ba moeli oa matla boema-kepeng bo ka beoa ho rejisetara 0x29.
  • Bits 0…3 e bonts'a ketsahalo ea moroalo o mongata
    • 0 = Ha ho phetoho
    • 1 = Matla a tlositsoe likoung ka lebaka la ho tlala
  • Bits 4…7 e bontša ketsahalo ea underload/PD disconnect/MPS
    • 0 = Ha ho phetoho
    • 1 = Matla a ile a tlosoa likoung ka lebaka la ho tlosoa ha thepa / PD ho tlosoa / MPS 0x08 / 0x09-Mefuta ea Matla a Matla / Liketsahalo Tsa Moedi oa Hona Joale
  • Lirekoto tsena tse peli li bonts'a liphetoho maemong a boema-kepe ka lebaka la phoso ea matla a koung (ke hore, inrush e phahameng), le ha boema-kepe bo ne bo khaotsoe ka lebaka la ketsahalo ea hajoale ea moeli nako e telele.
  • TLIM kapa potoloho e khuts'oane.
  • Ngoliso ea 0x08 ke ngoliso ea ho bala feela.
  • Ngoliso 0x09 ke rejisetara ea COR; ha e baloa, lirejistara ka bobeli 0x06 le 0x07 lia hlakoloa.
  • Bits 0…3 e bontša ketsahalo ea phoso ea matla-up
    • 0 = Ha ho phoso
    • 1 = Matlafatsa phoso boema-kepeng
  • Bits 4…7 e bontša ketsahalo ea underload/PD disconnect/MPS
    • 0 = Ha ho phoso
    • 1 = Matla a tlositsoe likoung ka lebaka la ketsahalo ea hajoale ea moeli / e khuts'oane 0x0A/0x0B — Liketsahalo tsa Phepelo
  • Mosebetsi oa Ngoliso Lirejiseta tsena tse peli li bonts'a ho hloleha phepelong ea motlakase ea sistimi.
  • Karolo ka 'ngoe e bontša ho hloleha ho itseng.
  • Ngodisa 0x0A ke ngodiso e balwang feela.
  • Ngoliso 0x0B ke rejisetara ea COR; ha e baloa, lirekoto ka bobeli, 0x06 le 0x07, lia hlakoloa.
    Tafole e latelang e hlalosa ho hloleha ho amanang le lirejisetara tse peli.

Lethathamo la 3-2. Ketsahalo ea ho Hloka Liphepelo

Bit Ketsahalo Lebitso Tlhaloso ea Ketsahalo
0 NA Kamehla 0
1 Ketsahalo ea OSS
  • 0 = Ha ho ketsahalo
  • 1 = Ketsahalo e etsahetse
  • (Reg 0x00, bit 2 e boetse e behiloe ka lebaka la ketsahalo ea OSS)
2 Boema-kepe ba 4—Ketsahalo ea Motlakase (Boema-kepe ba 1 le 2)
  • 0 = Ha ho ketsahalo
  • 1 = Ho feta matla a ketsahalo (Reg 0x00, bit 5 e boetse e behiloe)
3 Boema-kepe ba 4—Ketsahalo ea Motlakase (Boema-kepe ba 3 le 4)
  • 0 = Ha ho ketsahalo
  • 1 = Ho feta matla a ketsahalo (Reg 0x00, bit 5 e boetse e behiloe)
4 VMOHLOMI tlase haholo
  • 0 = Ha ho ketsahalo
  • 1 = VMOHLOMI e ka tlase ho moeli o fokolang
5 VDD temoso e tlase haholo
  • 0 = Ha ho ketsahalo
  • 1 = VDD e ka tlase ho moeli o fokolang oa temoso (2.7 VDC)
6 VDD ho hloleha ho tlase haholo
  • 0 = Ha ho ketsahalo
  • 1 = VDD e ka tlase ho tekanyo e tlase ea ho hloleha (2.4 VDC, PoE e holofetse)
7 Ho Feta Mocheso
  • 0 = Ha ho ketsahalo
  • 1 = Mocheso o feta maemo

Lingoliloeng tsa Boemo (0x0C ho isa ho 0x11)
Litokomane tsena tse 'nè tse fanang ka boemo ba ho lemoha boema-kepe li thathamisitsoe ho Lethathamo la 3-3,' me lihlopha tsa sebele tse fumanoeng li thathamisitsoe ho Lethathamo la 3-4. Lirekoto tsena li baloa feela.

  • 0x0C: Boemo ba Pono ea Port 1 / Sehlopha se Bonoeng
  • 0x0D: Boemo ba Pono ea Port 2 / Sehlopha se Bonoeng
  • 0x0E: Boemo ba Pono ea Port 3 / Sehlopha se Bonoeng
  • 0x0F: Boemo ba Pono ea Port 3 / Sehlopha se Fumanehileng
  • Rejisetara e 'ngoe le e 'ngoe e arotsoe ka li-bits bakeng sa boemo ba ho lemoha le boemo bo kopiloeng ba sehlopha.

Lethathamo la 3-3. Boemo ba ho Fumana (Bits 0…3)

Boleng Bin/Hex Boemo ba ho Fumana
0000b/0x0 Tse sa tsejoeng: Boleng ba POR
0001b/0x1 Potoloho e khutšoanyane
0010b/0x2 Boema-kepe bo lefisitsoe esale pele
0011b/0x3 Mohanyetsi o tlase haholo
0100b/0x4 Ho fumaneha ha IEEE® 802.3bt ho sebetsa
0101b/0x5 Mohanyetsi o phahame haholo
0110b/0x6 Boema-kepe bo butsoe/ha bo na letho
0111b/0x7 Kantle voltage fumanoa koung
Boleng Bin/Hex Boemo ba ho Fumana
1110b/0x14 MOSFET_MPHOTO

Lethathamo la 3-4. Boemo bo Kopiloeng ba Sehlopha (Bits 4…7)

Boleng Bin/Hex E kopile Sehlopha Boemo
0000b/0x0 Tse sa tsejoeng: Boleng ba POR
0001b/0x1 Sehlopha sa 1
0010b/0x2 Sehlopha sa 2
0011b/0x3 Sehlopha sa 3
0100b/0x4 Sehlopha sa 4
0101b/0x5 E bolokiloe: E tšoaroa joalo ka sehlopha sa 0
0110b/0x6 Sehlopha sa 0
0111b/0x7 Hajoale
1000b/0x8 Sehlopha sa 5 4P SS
1001b/0x9 Sehlopha sa 6 4P SS
1010b/0xA Sehlopha sa 7 4P SS
1011b/0xB Sehlopha sa 8 4P SS
1100b/0xC Sehlopha sa 4 + (boema-kepe ba PSE bo lekanyelitsoe ho mofuta oa 1 oa tekanyetso ea matla)
1101b/0xD Sehlopha sa 5 4P DS
1110b/0xE Reserved
1111b/0xF Ho fapana ha lihlopha

Lintlha: 

  • SS = Mosaeno o le Mong
  • DS = Tshaeno e Mebeli

0x10—Matla Enable/Matla a Molemo

  • The Power Enable bit (bits 0..3, hanyenyane ka koung) e behiloe ha boema-kepe bo ntse bo sebetsa.
  • Power Good Status bit (bits 4..7, hanyenyane ka koung) e emela kou ea phepelo ea matla, ka mor'a hore e bulehe ka katleho.
  • Rejisetara ena e hokahane le ngoliso ea liketsahalo 0x02/0x03.
  • Bits 0…3 Matla a nolofalletsa
  •  0 = Boema-kepe ha bo ts'ebetsong ea ho eketsa matla
  • 1 = Boema-kepe bo ntse bo sebetsa ka matla
  • Bits 4…7 Matla a Molemo
  • 0 = Boema-kepe bo timme
  •  1 = Boema-kepe bo matlafalitsoe ka katleho

0x11— Boemo ba I2C

  • Bits 3…6 e fana ka boleng ba li-pins A1…A4 (pins 48..51), e behang aterese ea I2C ea li-quads ka bobeli.

Lingoliloeng tsa Tlhophiso (0x12 ho isa ho 0x19 le 0x27/0x28) 0x12—Litlhophiso tsa Mokhoa oa Ts'ebetso ea Port

  • Ngoliso ena e baloa / ea ngoloa, ho beha likou tsohle tsa 4 ho latela Lethathamo la 3-5. E 'ngoe le e' ngoe ea li-bits tse 2 e beha kou ho latela Lethathamo la 3-5:
    • Bits 0..1 set port 1
    • Bits 2..3 set port 2
    • Bits 4..5 set port 3
    • Bits 6..7 set port 4

Lethathamo la 3-5. Mokhoa oa Ts'ebetso ea Boema-kepe

Mokhoa oa Ts'ebetso ea Boema-kepe Tlhaloso Boleng
Thibela Ts'ebetso efe kapa efe ea PoE e koetsoe (ho lemoha, ho hlopha, matla). 00b
Boikemelo
  • PSE e lumelletsoe.
  • Ho sibolloa, ho hlopha, matla-up, le matla li etsoa esale pele.
 11b
  • 0x15—Boema-kepe ba Pele
  • Rejisetara ena e baloa/e ngola.
  • Bits 0..3 e lokela ho hlophisoa ho 0.
  • Bits 4..7 e behiloe haeba boema-kepe bo etsoa ke phini ea OSS:
    • Bit 4 e beha port 1
    • Bit 5 e beha port 2
    • Bit 6 e beha port 3
    • Bit 7 e beha port 4
  • Ha biti e behiloe ho 0, boema-kepe ha bo hakoe ka lebaka la liphetoho tsa boemo ba OSS. Ha hanyane e behiloe ho 1, matla a koung eo a tlosoa nakong ea liphetoho tsa OSS. 0x17-Mefuta e meng
  • Rejisetara ena e ea baloa/ea ngoloa, ho lokela hore ho behoe bit 4 feela.
  • Bit 4 beha mokhoa oa OSS:
    • 0 = Mokhoa oa OSS ke hanyane
    • 1 = OSS ke multi-bit
  • 0x19—Konopo ea Matla
  • Rejisetara ena e baloa/e ngola.
  • Li-Bits 4..7 li sebelisetsoa ho tima mosebetsi oa nakoana oa PoE oa likou, hanyane ka koung. Ka mor'a moo boema-kepe bo tla tsoela pele ka mosebetsi oa bona ho ngoliso ea 0x14
    • 0 = Ha a etse letho.
    • 1 = Boema-kepe bo tingoe ka nakoana. Ka mor'a ketso, karoloana e tla hlakoloa ka hare. Ka mor'a ketso, karoloana e tla hlakoloa ka hare.
  • Hanyenyane ka kou e 'ngoe:
    • Bit 4 e beha port 1
    • Bit 5 e beha port 2
    • Bit 6 e beha port 3
    • Bit 7 e beha port 4

0x27/0x28—Tlhahiso-pele ea Multi-Bit

  • Lirekoto tsena tse 2 lia baloa / lia ngoloa, ho lokela ho beoa hanyane 4 feela, likotoana tse ling kaofela li lokela ho bolokoa joalo ka ha li le teng.
  • Tlalehong e 'ngoe le e' ngoe, ho ka behoa bohlokoa ba likou tse peli, maemo a 8 a bohlokoa, athe 7 ke eona e tlang pele ka ho fetisisa, 'me 0 ke eona e tlaase ka ho fetisisa.
  • Ngoliso ea 0x27 e beha bohlokoa ba likou 1, 2.
  • Ngolisa li-port tsa 0x28 tse 3, 4.
  • Lirekoto tse Akaretsang (0x1B le 0x1C)

0x1B—ID ea Moetsi le Chip IC

  • Rejisetara ena e baloa feela.
  • Boleng ba ngoliso ke 0x2D (00101101b).

0x1C - Sephetho sa AutoClass le Khokahano ea Tlhahlobo

  • Rejisetara ena e baloa feela.
  • Bits 0…1 fana ka sephetho sa cheke ea khokahano ea boema-kepe ba pele ba li-4 (likou tsa 1 le 2), ho latela Lethathamo la 3-6.
  • Bits 2…3 e fana ka sephetho sa cheke ea khokahano ea boema-kepe ba bobeli ba 4 (likou tsa 3 le 4), ka Lethathamo la 3-6.

Lethathamo la 3-6. Sephetho sa Tlhahlobo ea Khokahano

Boleng Sephetho sa Tlhahlobo ea Khokahano
0x0 Ha e tsejoe kapa e sa fella.
0x1 4-para ho saena a le mong.
0x2 4-para tse peli tse saenneng.
0x3 Teko ea khokahano e fosahetse, kapa mosaeno o fosahetseng o fumanoe ho e 'ngoe ea lihlopha tse peli.

Bits 4…7 Bontša hore na PD e hokahaneng e tšehetsa AutoClass:

  • 0 = PD ha e tšehetse AutoClass
  • 1 = PD e tšehetsa AutoClass

Hanyenyane ka koung:

  • Bit 4 e beha port 1
  • Bit 5 e beha port 2
  • Bit 6 e beha port 3
  •  Bit 7 e beha port 4
    Tlhokomeliso: The Sephetho sa litekanyo tsa AutoClass se baloa lirejistareng 0x51 ho 0x54.

Lirekoto tse Khethehileng (0x24 ho 0x2F) 0x24/0x25—Matla a Phoso

  • Lingoliloeng tsena tse peli li bonts'a phoso nakong ea matla a tatellano (ho lemoha, ho khetholla, kapa matla a sa lekaneng).
  • Ngoliso ea 0x24 ke ngoliso ea ho bala feela.
  • Ngoliso 0x25 ke rejisetara ea COR; ha e baloa, lirejistara ka bobeli 0x24 le 0x25 lia hlakoloa.

Boema-kepe bo bong le bo bong bo emeloa ke likotoana tse 2, joalo ka ha ho bonoa ho Lethathamo la 3-8:

  • Bits 0..1 e emela boema-kepe ba 1
  • Bits 2..3 e emela boema-kepe ba 2
  • Bits 4..5 e emela boema-kepe ba 3
  • Bits 6..7 e emela boema-kepe ba 4

Lethathamo la 3-7. Matla ho Sephetho sa Phoso

Boleng Matla a ho Hloka Tlhaloso
0x0 Ha ho ho hloleha
0x1 Ho fumanwa ho fosahetseng
0x2 Sehlopha se fosahetse
0x3 Matla a sa lekaneng

0x26—Ports Matrix (Remap)

  • Rejisetara ena e baloa / ea ngoloa, e reretsoe ho hlophisa bocha matrix a likou ka tsela e fapaneng ho feta matrix a kamehla (0xE4).
  • Haeba rejisetara e sa lokisoa ke mosebelisi, matrix ea boema-kepe e bonts'oa ho Lethathamo la 3-8.

Boema-kepe bo bong le bo bong bo emeloa ke li-bits tse peli:

  • Bits 0..1 e emela boema-kepe bo utloahalang 1
  • Bits 2..3 e emela boema-kepe bo utloahalang 2
  • Bits 4..5 e emela boema-kepe bo utloahalang 3
  • Bits 6..7 e emela boema-kepe bo utloahalang 4

Lethathamo la 3-8. Port Matrix ea kamehla

Bits Boleng Boema-kepe bo utloahalang Ea nama Boema-kepe
0..1 0 (00b) 1 1
2..3 1 (01b) 2 2
4..5 2 (10b) 3 3
6..7 3 (11b) 4 4

0x2A/0x2B—4-Pair Police Configuration

  • Lingoliloeng tsena tse peli li baloa / lia ngoloa, ho beha moeli oa matla a likou (PCUT). Ngolisa 0x2A e beha likou tse 4 tsa li-port tsa 1 le 2.
  • Ngolisa 0x2B e beha likou tse 4 tsa li-port tsa 3 le 4.
  • Tafole e latelang e thathamisa boemo ba matla ba li-port tse 4.
  • Moeli oa matla o lekana le PCUT = 0.5 * Boleng

Lethathamo la 3-9. Setšoantšo sa PCUT

E abetsoe Sehlopha Boleng Hex/Dec Bonyane PKHOOA Tlhophiso (0x17 Bit 0 = 0) Bonyane PKHOOA Tlhophiso (0x17 Bit 0 = 1)
Sehlopha sa 0 0x22 (34d) 15.5W 17W
Sehlopha sa 1 0x08 (8d) 4W 17W
Sehlopha sa 2 0x0E (14d) 7W 17W
Sehlopha sa 3 0x22 (34d) 15.5W 17W
Sehlopha sa 4 0x40 (64d) 30W 32W
E abetsoe Sehlopha Boleng Hex/Dec Bonyane PKHOOA Tlhophiso (0x17 Bit 0 = 0) Bonyane PKHOOA Tlhophiso(0x17 Bit 0 = 1)
Sehlopha sa 5—4P SS 0x5A (90d) 45W 45W
Sehlopha sa 6—4P SS 0x78 (120d) 60W 60W
Sehlopha sa 7—4P SS 0x96 (150d) 75W 75W
Sehlopha sa 8—4P SS 0xB4 (180d) 90W 90W
Sehlopha sa 4+—Mofuta oa 1 o na le moeli 0x22 (34d) 15.5W 17W
4P DS PD efe kapa efe 0xB4 (180d) 90W 90W

0x2C—Mocheso oa Chip
Ena ke rejisetara ea ho bala feela e fanang ka mocheso oa mocheso, o ipapisitse le foromo e latelang: 367 − {2 * (regVal_decimal)} (likhato tsa Celsius)

0x2E/0x2F—VMAIN Tekanyo

  • Lirekoto tsena tse peli li baloa feela, 'me li fana ka boemo ba VMAIN ka li-bits tse 14, ka qeto ea 64.4 mV hanyane.
  • Ngoliso ea 0x2E e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x2F e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe.
  • Boleng bo ka holimo bo ka lekanngoa ke 61V, VMAIN ka holimo ho 61V e tlalehoa e le 61V (0x3B3).
  • Example: VMAIN ea 55V e fanoa e le 0x356 (55V/64.4 mV = 854).
  • Port Voltage le Lirekoto tsa Tekanyo tsa Hona Joale (0x30 ho isa ho 0x3F)
  • Voltage le tsa hajoale tsa boema-kepe bo bong le bo bong li fanoa ke lirejisetara tse 'ne (tse peli bakeng sa port voltage le tse peli tsa hajoale).
  • Lirekoto tse peli tsa hajoale ka boema-kepe li fana ka boemo ba hajoale ka li-bits tse 14, ka qeto ea 1 mA ka LSB. Boleng bo phahameng bo ka lekanngoang ke 1020 mA, ha joale ka holimo ho boemo boo bo tlalehoa e le 1020 mA (0x3FC).
  • Tse peli voltage registara ka boema-kepe fana ka voltage ka li-bits tse 14, ka qeto ea 64.4 mV ka LSB. Boleng bo ka holimo bo ka lekanngoa ke 61V, voltage ka holimo ho boemo boo e tlalehoa e le 61V (0x3B3).

0x30/0x31—Boema-kepe ba 1 Tekanyo ea Hona Joale

  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x32/0x33—Port 1 Moqtage Tekanyo
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x34/0x35—Port 2 Tekanyo ea Hona Joale
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x36/0x37—Port 2 Moqtage Tekanyo
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe.

0x38/0x39—Boema-kepe ba 3 Tekanyo ea Hona Joale

  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x3A/0x3B—Port 3 Moqtage Tekanyo
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x3C/0x3D—Port 4 Tekanyo ea Hona Joale
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe. 0x3E/0x3F—Port 4 Moqtage Tekanyo
  • Register 0x30 e emela likotoana tse 8 tsa LSB tsa tekanyo.
  • Ngoliso ea 0x31 e emetse likotoana tse 6 tsa MSB, likotoana tsa 6 le 7 tsa rejisetara eo ha li sebelisoe.
  • Port Inrush Current Control Register (0x40)

0x40 - Taolo ea Hona Joale ea Inrush
Ke likotoana tsa 0–3 feela tse sebetsang, likotoana tsa 4–7 ha li sebelisoe.

Karolo ka 'ngoe e beha kou:

  • Bit 0 e beha port 1
  • Bit 1 e beha port 2
  • Bit 2 e beha port 3
  • Bit 3 e beha port 4
  • 0: Haeba qetellong ea nako ea ho qala inrush ea hajoale e ntse e phahame, boema-kepe ha bo matlafatsoe.
  • 1: Haeba qetellong ea nako ea ho qala inrush hajoale e ntse e phahame, boema-kepe bo tsamaisoa ka mokhoa o tloaelehileng.
  • Phetolelo ea Firmware le Lirekoto tsa ID tsa Chip (0x41 le 0x43)

0x41 - Firmware Version

  • Rejisetara ena e baloa feela.
  • Bakeng sa mofuta oa morao-rao, ikopanye le Microchip.
  • 0x43—Silicon Version le Chip ID
  • Rejisetara ena e baloa feela.
  • Bits 0…4 bontša chip ID.
  • Bits 5…7 e bonts'a mofuta oa silicon.
  • Bakeng sa mofuta oa morao-rao, ikopanye le Microchip.
  • Lirekoto tsa Tekanyo ea Signature ea Boema-kepe (0x44 ho isa ho 0x4B)

0x44–0x47—Bohanyetsi bo Lekanyelitsoeng ho Tshaeno

  • Lirekoto tsena tse 'ne li baloa feela,' me li fana ka khanyetso e lekantsoeng nakong ea ho sibolloa ha tekeno.
  • Ngolisa boema-kepe bo bong, 256Ω biti ka 'ngoe (480Ω ka bokhutšoanyane, 65280Ω boholo).
  • 0x48–0x4B—Bokhoni bo Lekanyelitsoeng ba Tshaeno
  • Mosebetsi oa Ngoliso Lirejiseta tsena tse nne li baloa feela, 'me li fana ka matla a lekantsoeng nakong ea ho sibolloa ha tekeno.
  • Ngolisa boema-kepe bo bong, ka qeto ea 64 nF hanyane ka hanyane.

Lingoliloeng tsa Boemo ba Boemo ba Boema-kepe (0x4C ho isa ho 0x4F)
Lirekoto tsena tse 'ne li baloa feela' me li fana ka sehlopha se kopiloeng sa PD le sehlopha se abetsoeng boema-kepe. Tafole e latelang e thathamisa litekanyetso ka bobeli (tse kopilitsoeng le tse abetsoeng).

Lethathamo la 3-10. Melao e Kopiloeng le e Fanoeng

Boleng ba E kopile le E abetsoe Bits Sehlopha Boemo
0 0 0 0 Tse sa tsejoeng
0 0 0 1 Sehlopha sa 1
0 0 1 0 Sehlopha sa 2
0 0 1 1 Sehlopha sa 3
0 1 0 0 Sehlopha sa 4
0 1 0 1 NA
0 1 1 0 Sehlopha sa 0
0 1 1 1 NA
1 0 0 0 Sehlopha sa 5—4-Pair SS
1 0 0 1 Sehlopha sa 6—4Pair SS
1 0 1 0 Sehlopha sa 7—4-Pair SS
1 0 1 1 Sehlopha sa 8 -4-Pair SS
1 1 0 0 NA
1 1 0 1 Sehlopha sa 5—4-Pair DS
1 1 1 0 NA
1 1 1 1 NA

Lintlha: 

  • SS = Mosaeno o le Mong; DS = Tshaeno e Mebeli.
  • Haeba PSE e na le tekanyetso e lekanyelitsoeng ea matla 'me e sa khone ho fana ka matla ao PD e a kopang, sehlopha se abetsoeng boema-kepe se ka ba tlase ho feta sehlopha se kopiloeng ke PD.

0x4C—Port 1 Boemo ba Sehlopha

  • Bits 0…3 fana ka sehlopha se kopiloeng sa PD. Bits 4…7 fana ka sehlopha se abetsoeng boema-kepe. 0x4D—Port 2 Boemo ba Sehlopha
  • Bits 0…3 fana ka sehlopha se kopiloeng sa PD. Bits 4…7 fana ka sehlopha se abetsoeng boema-kepe. 0x4E—Port 3 Boemo ba Sehlopha
  • Bits 0…3 fana ka sehlopha se kopiloeng sa PD. Bits 4…7 fana ka sehlopha se abetsoeng boema-kepe. 0x4F—Port 4 Boemo ba Sehlopha
  • Bits 0…3 fana ka sehlopha se kopiloeng sa PD. Bits 4…7 fana ka sehlopha se abetsoeng boema-kepe.

 Lingoliloeng tsa Boemo ba AutoClass (0x51 ho 0x54)

  • Litokomane tsena tse 'nè li baloa feela' me li fana ka tekanyo ea AutoClass le boemo.
  • Bits 0…6 fana ka matla a lekantsoeng nakong ea AutoClass stage, ka qeto ea 0.5W ka LSB. Bit 7 e fana ka boemo ba AutoClass:
  • 0 = Tekanyo ha ea etsoa.
  • 1 = Tekanyo ea AutoClass e phethiloe. 0x51—Port 1 AutoClass Boemo
    • Bits 0…6 ke sehlopha se kopiloeng ke PD.
    • Bit 7 ke boemo ba AutoClass.
  • 0x52—Boemo ba Port 2 AutoClass
    • Bits 0…6 ke sehlopha se kopiloeng ke PD.
    • Bit 7 ke boemo ba AutoClass.
  • 0x53—Boemo ba Port 3 AutoClass
    • Bits 0…6 ke sehlopha se kopiloeng ke PD.
    • Bit 7 ke boemo ba AutoClass.
  • 0x53—Boemo ba Port 3 AutoClass
    • Bits 0…6 ke sehlopha se kopiloeng ke PD.
    • Bit 7 ke boemo ba AutoClass.

 Nalane ea Phetoho

Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.

Khatiso Letsatsi Tlhaloso
B 4/2023 Karolo e ekelitsoeng 1. Automode Operational Flowchart le Setšoantšo sa 1-1
A 04/2023 Phetolelo ea Pele

Boitsebiso ba Microchip

  • Microchip Websebaka
    Microchip e fana ka tšehetso ea inthaneteng ka rona website at www.microchip.com . Sena websebaka se sebedisoang ho etsa files le tlhahisoleseding e fumaneha habonolo ho bareki. Tse ling tsa litaba tse fumanehang li kenyelletsa:
    •  Tšehetso ea Sehlahisoa - Lipampiri tsa data le errata, lintlha tsa kopo le sample mananeo, lisebelisoa tsa moralo, litataiso tsa basebelisi le litokomane tsa tšehetso ea hardware, lintlafatso tsa morao-rao tsa software le li-archived software
    • Tšehetso e Akaretsang ea Tekheniki - Lipotso Tse Botsoang Khafetsa (FAQs), likopo tsa tšehetso ea tekheniki, lihlopha tsa lipuisano tsa inthaneteng, lethathamo la litho tsa lenaneo la balekane ba Microchip
    • Khoebo ea Microchip - Mokhethoa oa lihlahisoa le litataiso tsa ho odara, likhatiso tsa morao-rao tsa khatiso tsa Microchip, lethathamo la lithupelo le liketsahalo, lethathamo la liofisi tsa thekiso ea Microchip, barekisi le baemeli ba feme.
  • Ts'ebeletso ea Tsebiso ea Phetoho ea Sehlahisoa
  • Ts'ebeletso ea tsebiso ea phetoho ea sehlahisoa sa Microchip e thusa ho boloka bareki ba le teng ka lihlahisoa tsa Microchip. Ba ngolisitseng ba tla fumana tsebiso ea lengolo-tsoibila neng kapa neng ha ho na le liphetoho, lintlafatso, lintlafatso kapa liphoso tse amanang le sehlahisoa se itseng sa lelapa kapa sesebelisoa sa ntlafatso sa thahasello.
  • Ho ngodisa, eya ho www.microchip.com/pcn mme o latele ditaelo tsa ngodiso.
  • Tšehetso ea Bareki
  • Basebelisi ba lihlahisoa tsa Microchip ba ka fumana thuso ka likanale tse 'maloa:
    • Morekisi kapa Moemedi
    • Ofisi ea Thekiso ea Lehae
    • Embedded Solutions Engineer (ESE)
    • Tšehetso ea tekheniki
  • Bareki ba lokela ho ikopanya le mofani oa bona oa thepa, moemeli kapa ESE bakeng sa tšehetso. Liofisi tsa thekiso ea lehae le tsona li teng ho thusa bareki. Lethathamo la liofisi tsa thekiso le libaka li kenyelelitsoe tokomaneng ena.
  • Tšehetso ea tekheniki e fumaneha ka ho websebaka ho: www.microchip.com/support
  • Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip
  • Ela hloko lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip:
    • Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
    • Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
    • E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea sehlahisoa sa Microchip bo thibetsoe ka thata 'me bo ka tlola Molao oa Copyright oa Millennium oa Digital.
    • Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha". Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.
  • Tsebiso ea Molao
  • Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e kopana le litlhaloso tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho www.microchip.com/en-us/support/design-help/client-support-services.
  • TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E ETSE LITLHAKISO KAPA LITIISETSO TSA MOFUTA OFE kapa O fe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, MOLAO KAPA HO SE EMONG, E Amanang le LITSEBISO HO kenyeletsoa EMPA E SA FUMANE LE TIISETSO EFE KAPA EFE E FUMANEHLENG LE TLAMELO. BAKENG SA MORERO O KHETHEHILENG, KAPA LITIISETSO TSE AMANG LE MAEMO A OONA, BOLEMO, KAPA KETSAHALO EA OONA.
  • HA HO LE TSATSAHALO, MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA LIFE, TSE KHETHEHILENG, TSA KOTSI, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENYEHO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OFE O TLANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, LE HO KA ETSAHALA KETSAHALO E ETSANG. TSE KA E KA ETSAHANG KAPA MESEKO E BONAHALA. HO FIHLELA KA HO FETISISA KA MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO TSOHLE KA TSELA EFE KA ENG EA MAHALA E Amanang le LITSEBISO KAPA.
  • TŠEBELETSO EA YONA E KE KE E FEELA TLOMO EA LITEFO, HAEBA LI LE TENG, TSEO U LI LEFLENG KA THOHO HO MICROCHIP BAKENG SA TSEBISO.
  • Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo tsohle, likopo, lisutu, kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.

Matšoao a khoebo

  • Lebitso le logo ea Microchip, logo ea Microchip, Adaptec, AVR, logo ea AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXSty Media, Micrologos, Micrologo, MOXSty , MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, tradeSource ea XME, Tichyon, TradeSource ea XME ea UNITED, UNITED TRADING, TXME, TEKSTO, TEKNOX, TEKS E kenyelelitsoe USA le linaheng tse ling.
  • AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​​​Taolo, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, logo ea ProASIC Plus, Quiet- Wire, SmartFusion, Sync,TimePyTime,TimeTime,TimeTime, Sync,TimeTime,TextTime , mme ZL ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated naheng ya USA
  • Khatello ea Bohlokoa e Haufi, AKS, Analog-for-the-Digital Age, AnyCapacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEmic DAMSrage, EAMsvenet, dsPICDEM DAMSrage, EAMsvenet therGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, RTAX , RTG4, SAM- ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Kakaretso ea Mamello, Nako e Tšeptjoang, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, le ZENA ke matshwao a kgwebo a Microchip Technology Incorporated USA le dinaheng tse ding.
  • SQTP ke letšoao la ts'ebeletso la Microchip Technology Incorporated USA
  • Letšoao la Adaptec, Frequency on Demand, Silicon Storage Technology, le Symmcom ke matšoao a ngolisitsoeng a khoebo a Microchip Technology Inc. linaheng tse ling.
  • GestIC ke letshwao la kgwebo le ngodisitsweng la Microchip Technology Germany II GmbH & Co. KG, e leng lekala la Microchip Technology Inc., dinaheng tse ding.
  • Matshwao a mang kaofela a boletsoeng mona ke thepa ea lik'hamphani tse fapaneng. © 2023, Microchip Technology Incorporated le lithuso tsa eona. Litokelo tsohle li sirelelitsoe.
  • ISBN: 978-1-6683-2380-9
  • Tsamaiso ea Tsamaiso ea Boleng
  • Ho fumana leseli mabapi le Tsamaiso ea Tsamaiso ea Boleng ea Microchip, ka kopo etela www.microchip.com/quality.

Lithekiso le Tšebeletso ea Lefatše Lohle

LIMAKASE

ASIA/PACIFIC

  • Australia - Sydney
  • Mohala: 61-2-9868-6733
  • China - Beijing
  • Mohala: 86-10-8569-7000
  • China - Chengdu
  • Mohala: 86-28-8665-5511
  • China - Chongqing
  • Mohala: 86-23-8980-9588
  • China - Dongguan
  • Mohala: 86-769-8702-9880
  • China - Guangzhou
  • Mohala: 86-20-8755-8029
  • China - Hangzhou
  • Mohala: 86-571-8792-8115
  • China - Hong Kong SAR
  • Mohala: 852-2943-5100
  • China - Nanjing
  • Mohala: 86-25-8473-2460
  • China - Qingdao
  • Mohala: 86-532-8502-7355
  • China - Shanghai
  • Mohala: 86-21-3326-8000
  • China - Shenyang
  • Mohala: 86-24-2334-2829
  • China - Shenzhen
  • Mohala: 86-755-8864-2200
  • China - Suzhou
  • Mohala: 86-186-6233-1526
  • China - Wuhan
  • Mohala: 86-27-5980-5300
  • China - Xian
  • Mohala: 86-29-8833-7252
  • China - Xiamen
  • Mohala: 86-592-2388138
  • China - Zhuhai
  • Mohala: 86-756-3210040
  • India - Bangalore
  • Mohala: 91-80-3090-4444
  • India - New Delhi
  • Mohala: 91-11-4160-8631
  • India - Pune
  • Mohala: 91-20-4121-0141
  • Japane - Osaka
  • Mohala: 81-6-6152-7160
  • Japane - Tokyo
  • Mohala: 81-3-6880-3770
  • Korea - Daegu
  • Mohala: 82-53-744-4301
  • Korea - Seoul
  • Mohala: 82-2-554-7200
  • Malaysia - Kuala Lumpur
  • Mohala: 60-3-7651-7906
  • Malaysia - Penang
  • Mohala: 60-4-227-8870
  • Philippines - Manila
  • Mohala: 63-2-634-9065
  • Singapore
  • Mohala: 65-6334-8870
  • Taiwan - Hsin Chu
  • Mohala: 886-3-577-8366
  • Taiwan - Kaohsiung
  • Mohala: 886-7-213-7830
  • Taiwan - Taipei
  • Mohala: 886-2-2508-8600
  • Thailand - Bangkok
  • Mohala: 66-2-694-1351
  • Vietnam - Ho Chi Minh
  • Mohala: 84-28-5448-2100

ULAYA

  • Austria - Wels
  • Mohala: 43-7242-2244-39
  • Fax: 43-7242-2244-393
  • Denmark - Copenhagen
  • Mohala: 45-4485-5910
  • Fax: 45-4485-2829
  • Finland - Espoo
  • Mohala: 358-9-4520-820
  • Fora - Paris
  • Tel: 33-1-69-53-63-20
  • Fax: 33-1-69-30-90-79
  • Jeremane - Ho khabisa
  • Mohala: 49-8931-9700
  • Jeremane - Haan
  • Mohala: 49-2129-3766400
  • Jeremane - Heilbronn
  • Mohala: 49-7131-72400
  • Jeremane - Karlsruhe
  • Mohala: 49-721-625370
  • Jeremane - Munich
  • Tel: 49-89-627-144-0
  • Fax: 49-89-627-144-44
  • Jeremane - Rosenheim
  • Mohala: 49-8031-354-560
  • Iseraele - Ra'anana
  • Mohala: 972-9-744-7705
  • Italy - Milan
  • Mohala: 39-0331-742611
  • Fax: 39-0331-466781
  • Italy - Padova
  • Mohala: 39-049-7625286
  • Netherlands - Drunen
  • Mohala: 31-416-690399
  • Fax: 31-416-690340
  • Norway - Trondheim
  • Mohala: 47-72884388
  • Poland - Warsaw
  • Mohala: 48-22-3325737
  • Romania - Bucharest
  • Tel: 40-21-407-87-50
  • Spain - Madrid
  • Tel: 34-91-708-08-90
  • Fax: 34-91-708-08-91
  • Sweden - Gothenberg
  • Tel: 46-31-704-60-40
  • Sweden - Stockholm
  • Mohala: 46-8-5090-4654
  • UK - Wokingham
  • Mohala: 44-118-921-5800
  • Fax: 44-118-921-5820

Bukana ea Mosebelisi
© 2023 Microchip Technology Inc. le makalana a eona

Litokomane / Lisebelisoa

MICROCHIP PD77728 Auto Mode Register Map [pdf] Buka ea Taelo
DS00004761B, PD77728 Auto Mode Register Map, PD77728, PD77728 Register Map, Auto Mode Register Map, Register Map, Map

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *