Important Note
Thank you for purchasing our air conditioner. Please read this manual carefully before operating your new air conditioning unit. Make sure to save this manual for future reference.
Table of Contents
Remote Controller Specifications
| Model | RG10A(D2S)/BGEF, RG10A(D2S)/BGEFU1, RG10A1(D2S)/BGEF, RG10A2(D2S)/BGEFU1, RG10A2(D2S)/BGCEFU1, RG10A2(D2S)/BGCEF, RG10A10(D2S)/BGEF, RG10B(D2)/BGEF, RG10B1(D2)/BGEF, RG10B2(D2)/BGCEF, RG10B10(D2)/BGEF, RG10B10(D2)/BGCEF, RG10Y1(D2)/BGEF, RG10Y2(D2S)/BGEF |
|---|---|
| Rated Voltage | 3.0V (Dry batteries R03/LR03×2) |
| Signal Receiving Range | 8m |
| Environment | -5°C~60°C (23°F~140°F) |
NOTE: For models RG10Y1(D2)/BGEF, RG10Y2(D2S)/BGEF: If the unit is turned off under COOL, AUTO or DRY mode with the set temperature less than 24°C, the set temperature will automatically be set to 24°C when you turn on the unit again. If the unit is turned off under HEAT mode with the set temperature more than 24°C, the set temperature will automatically be set to 24°C when you turn on the unit again.
Quick Start Guide
- FIT BATTERIES: Slide the back cover downward, insert batteries matching polarity, and slide the cover back.
- SELECT MODE: Press the MODE button to cycle through AUTO, COOL, DRY, HEAT, FAN modes.
- SELECT TEMPERATURE: Use the TEMP ⬆️ and TEMP ⬇️ buttons to set your desired temperature.
- SELECT FAN SPEED: Use the FAN SPEED buttons (or TEMP ⬆️/⬇️ for 1% increments) to adjust fan speed.
- POINT REMOTE TOWARD UNIT: Ensure the remote is pointed towards the air conditioner.
- PRESS POWER BUTTON: Press the ON/OFF button to turn the unit on or off.
NOT SURE WHAT A FUNCTION DOES? Refer to the "How to Use Basic Functions" and "How to Use Advanced Functions" sections of this manual for detailed descriptions.
SPECIAL NOTE:
- Button designs may differ slightly from examples.
- If the indoor unit lacks a function, pressing its button on the remote will have no effect.
- In case of discrepancies between the "Remote Controller Manual" and the "USER'S MANUAL" regarding function descriptions, the "USER'S MANUAL" description prevails.
Handling the Remote Controller
Inserting and Replacing Batteries
Your air conditioning unit may come with two batteries (some units). Insert batteries before use.
- Slide the back cover downward to expose the battery compartment.
- Insert batteries, matching the (+) and (-) ends with the symbols inside the compartment.
- Slide the battery cover back into place.
Battery Notes
For optimum performance:
- Do not mix old and new batteries, or batteries of different types.
- Do not leave batteries in the remote control if you do not plan to use it for more than 2 months.
Battery Disposal
Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal.
Tips for Using Remote Control
- The remote control must be used within 8 meters of the unit.
- The unit will beep when a remote signal is received.
- Curtains, other materials, and direct sunlight can interfere with the infrared signal receiver.
- Remove batteries if the remote will not be used for more than 2 months.
Notes for Using Remote Control (Compliance Information)
The device complies with local national regulations.
- Canada: Complies with CAN ICES-3(B)/NMB-3(B).
- USA: Complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with Class B digital device limits per FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause radio communication interference. There is no guarantee interference won't occur. If interference occurs, try measures like reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for help. Modifications not approved by the compliance party could void user authority to operate the equipment.
Remote Screen Indicators
Information displayed when the remote controller is powered on.
Diagram shows the remote's LCD screen with various icons and their meanings.
- Transmission Indicator: Lights up when the remote sends a signal.
- TIMER ON/OFF Display: Shows timer status.
- Silence Feature Display: Indicates silence mode.
- Breeze Away Display: Indicates Breeze Away mode (some units).
- Active Clean Feature Display: Indicates Active Clean mode.
- Fresh Feature Display: Indicates Fresh mode.
- Sleep Mode Display: Indicates Sleep mode.
- Follow Me Feature Display: Indicates Follow Me mode.
- Wireless Control Feature Display: Indicates wireless control status (some units).
- Low Battery Detection Display: Flashes when the battery is low.
- MODE Display: Shows current mode (AUTO, COOL, DRY, HEAT, FAN).
- ECO Display: Shows when ECO feature is activated.
- GEAR Display: Shows when GEAR feature is activated.
- LOCK Display: Shows when the buttons are locked.
- FAN SPEED Display: Shows selected fan speed (Silence, LOW, MED, HIGH, AUTO). Notes indicate specific speed values may not be displayed on all models.
- Temperature/Timer/Fan Speed Display: Shows set temperature by default, or fan speed/timer setting. Temperature range: 16-30°C/60-86°F (or 20-28°C/68-82°F). Timer range: 0-24 hours. Fan speed range: AUTO-100%. Display is blank in FAN mode.
- Horizontal Louver Swing Display: Indicates horizontal louver movement.
- Vertical Louver Auto Swing Display: Indicates vertical louver movement.
- TURBO Mode Display: Indicates TURBO mode.
- A/B Indicators: "A" may indicate "Not available for this unit".
Note: Actual operation may only show relative function signs on the display.
How to Use Basic Functions
ATTENTION: Ensure the unit is plugged in and power is available before operation.
AUTO Mode
- Select AUTO mode using the MODE button.
- Set your desired temperature using TEMP ⬆️/⬇️.
- Turn on the air conditioner using the ON/OFF button.
NOTE: In AUTO mode, the unit automatically selects COOL, FAN, or HEAT based on the set temperature. Fan speed cannot be set in AUTO mode.
COOL or HEAT Mode
- Select COOL or HEAT mode using the MODE button.
- Set the temperature using TEMP ⬆️/⬇️.
- Set the fan speed using the FAN SPEED button.
- Turn on the air conditioner using the ON/OFF button.
DRY Mode
- Select DRY mode using the MODE button.
- Set your desired temperature using TEMP ⬆️/⬇️.
- Turn on the air conditioner using the ON/OFF button.
NOTE: Fan speed cannot be set in DRY mode as it is automatically controlled.
FAN Mode
- Select FAN mode using the MODE button.
- Set the fan speed using the FAN SPEED button.
- Turn on the air conditioner using the ON/OFF button.
NOTE: Temperature cannot be set in FAN mode; no temperature displays on the remote screen.
How to Use Advanced Functions
Setting the TIMER
Set the amount of time after which the unit will automatically turn on/off.
TIMER ON Setting:
- Press the TIMER button to initiate the ON time sequence.
- Press TEMP ⬆️ or ⬇️ multiple times to set the desired ON time.
- Point the remote at the unit and wait 1 second; TIMER ON will be activated.
TIMER OFF Setting:
- Press the TIMER button to initiate the OFF time sequence.
- Press TEMP ⬆️ or ⬇️ multiple times to set the desired OFF time.
- Point the remote at the unit and wait 1 second; TIMER OFF will be activated.
NOTE: Time increments are 30 minutes up to 10 hours, then 1 hour increments up to 24 hours. Timer resets to 0.0 after 24 hours. Cancel by setting timer to 0.0h.
TIMER ON & OFF Setting Example: Illustrates setting a 2.5-hour ON timer and a 5-hour OFF timer, showing how the unit turns on and off relative to the current time.
Swing Function
- Press the SWING button: The horizontal louver swings up and down. Press again to stop.
- Press and hold SWING for more than 2 seconds: Activates vertical louver swing (model dependent).
- Continue pressing SWING: Cycles through five different airflow directions.
NOTE: When the unit is off, pressing and holding MODE and SWING together for one second opens the louver for cleaning. Pressing and holding them again resets the louver (model dependent).
LED DISPLAY
- Press the LED button: Turns the indoor unit's LED display and buzzer on/off.
- Press and hold LED for more than 5 seconds: Displays actual room temperature. Pressing again for over 5 seconds reverts to setting temperature display (some units).
ECO/GEAR Function
Press ECO/GEAR to enter energy-efficient modes: ECO → GEAR(75%) → GEAR(50%) → Previous setting → ECO.
ECO Operation:
In cooling mode, ECO adjusts temperature to 24°C/75°F and fan speed to AUTO for energy saving (if set temperature is below 24°C/75°F). If set temperature is above 24°C/75°F, fan speed changes to AUTO, temperature remains unchanged.
NOTE: Pressing the ECO/GEAR button, changing mode, or setting temperature below 24°C/75°F stops ECO operation. For ECO operation, set temperature should be 24°C/75°F or above; insufficient cooling may occur. Press ECO again to stop if uncomfortable.
GEAR Operation:
Enters GEAR operation: 75% (up to 75% energy consumption) → 50% (up to 50% energy consumption) → Previous setting mode. Display alternates between energy consumption and set temperature.
SHORTCUT Function
Press SHORTCUT button (some units): Restores previous settings (mode, temperature, fan speed, sleep). Pressing for over 2 seconds saves current settings.
Silence Function
Press and hold FAN button for more than 2 seconds to activate/disable Silence function (some units). May result in insufficient cooling/heating. Pressing ON/OFF, Mode, Sleep, Turbo, or Clean cancels silence function.
FP Function
The unit operates at high fan speed with temperature automatically set to 8°C/46°F (while compressor is on). This function is for heat pump air conditioners only. Specific button presses (2 times within 1 second under HEAT mode with specific temperatures) activate FP function for certain models. Pressing ON/OFF, Sleep, Mode, Fan, or Temp cancels it.
LOCK Function
Press CLEAN and TURBO buttons simultaneously for more than 5 seconds to activate Lock function. All buttons are unresponsive except CLEAN and TURBO, which can disable locking when pressed together for two seconds.
SET Function
Press SET to enter function setting, then use SET or TEMP ⬆️/⬇️ to select. The symbol flashes; press OK to confirm. To cancel, repeat the process.
- Breeze Away: Avoids direct airflow for comfort. Available in COOL, FAN, DRY modes.
- FRESH: Activates ion generator to purify air.
- Sleep: Decreases energy use during sleep. Can only be activated via remote. Not available in FAN or DRY mode.
- Follow Me: Remote measures ambient temperature and sends it to the unit every 3 minutes for optimized comfort. Press and hold TURBO for 7 seconds to start/stop this memory feature. Activation/deactivation is indicated on screen. This function is not cancelled by ON/OFF, mode changes, or power failure.
- AP Function: For wireless network configuration. For some units, press LED button seven times in 10 seconds to enter AP mode.
Note: If your remote has dedicated Breeze Away, Fresh, or Sleep buttons, you cannot use the SET button to select these features.
General Information
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.
Product Model: CR2756-RG10(D2S)
Version/Identifier: 16117000A37345
Date: 2021.05.08
Technical Requirements (Printing)
技术要求: 尺寸A5,大度 80克双胶纸 装订,黑白
(Technical requirements: Size A5, large size, 80g double-sided paper, binding, black and white)
