DALCNET MINI-1AC Awọn paramita Dimmer LED Taara Itọsọna Oniwun Eto
Awọn ẹya ara ẹrọ
- AC DIMMER + FADER
- Atunṣe imọlẹ ti WHITE ati ina MONOCHROME
- Ipese agbara (AC IN): 230 Vac @ 50 Hz, pẹlu ti abẹnu 1 A fiusi
- Ijade (AC OUT): 230 Vac Trailing Edge (350 W max), fun Ohu ati halogen lamps, LED yipada lamps, rinhoho ati laini LED lamps, dimmable Trailing Edge awakọ
- Local Command (PUSH): N° 1 N.O. push-butto
- Remote control: via Bluetooth Low Energy (BLE) with CASAMBI© mobile app
- Device configuration via CASAMBI© mobile application, parameters can be set (via Fixture):
- Dimming ti tẹ
- Iwọn imọlẹ to pọju ati min
- Iṣẹ iranti: tọju eto ipele imọlẹ to kẹhin
- ON/OFF and brightness soft dimming
- Suitable for use in Dry locations
- Ṣiṣe deede > 95%
- Iwọn iwọn otutu ti o gbooro sii
- 100% Igbeyewo iṣẹ
Ọja Apejuwe
MINI-1AC-CASAMBI is a single-channel Alternating Current (AC) Trailing Edge dimmer, which can be supplied by 230 Vac mains
power grid and is suitable for driving single-color AC loads such as incandescent and halogen lamps, LED yipada lamps, LED
strips/lamps ati dimmable awakọ ni Trailing Edge mode.
The AC dimmer is equipped with an internal 1 A fuse, protecting the internal circuitry, which makes the installation of an external
fuse optional. The maximum output current is 1.52 A and has the following protections: input fuse protection, output short-circuit
protection, short-circuit detection, and output open-circuit detection.
MINI-1AC-CASAMBI can be controlled remotely via Bluetooth or locally via N.O. (Normally Open) button connected to the phase,
neutral or as a dry contact. The type of wiring is recognized when it is turned on and the dimmer is automatically configured to
work with the control connected.
MINI-1AC-CASAMBI enables you to make not only simple brightness adjustments but also more dynamic lighting control systems.
This is made possible through the creation of multiple scenarios, animations, timers, daylight controls, and more.
Through the CASAMBI© mobile application and smartphones equipped with Bluetooth technology, it is possible to configure via
Fixtures multiple parameters, including maximum/minimum brightness levels. CASAMBI© mobile application can be downloaded
free of charge from the Apple APP Store and Google Play Store.
CASAMBI© Mobile App is free to download from the Apple APP Store and Google Play Store
⇢ Fun iwe afọwọkọ ti o wa titi di oni, jọwọ kan si wa webojula www.dalcnet.com or scan the QR Code on product label.
Ọja CODE
CODE | IBI TI INA ELEKITIRIKI TI NWA | O wu LED | N° IjadeCHANNEL | JIJIJIIṣakoso | IBILEIṣakoso | APP CONFIG |
MINI-1AC-CASAMBI | 230 Vac @ 50 Hz | 1 x1.52 A1 | 1 | Bluetooth LowEnergy (BLE) | Bọtini Titari NỌ.2 | CASAMBI©mobile app |
Aabo ATI erin
Tabili ti o tẹle n ṣe afihan awọn iru ingress ati aabo egress/iwari ti o wa lori ẹrọ naa.
Àkọ́kọ́ | Apejuwe | TERMINAL | OSIWAJU |
IFP | Idaabobo Fuse ti nwọle1 | AC IN | ✔ |
SCP | Idaabobo Kukuru-Circuit3 | AC Jade | ✔ |
SCD | Wiwa kukuru-Circuit | AC Jade | ✔ |
OCD | Ṣiṣawari-Circuit | AC Jade | ✔ |
Awọn ajohunše itọkasi
MINI-1AC-CASAMBI ni ibamu pẹlu awọn ilana ti a ṣe akojọ si ni tabili atẹle.
ITOJU | TITLE |
EN 55015 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting andsimilar equipment |
EN 61547 | Awọn ohun elo fun awọn idi ina gbogbogbo - Ibeere ajesara EMC 4 |
EN 61000-3-2 | Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions(equipment input current ≤ 16 A per phase) 4 |
EN 61000-3-3 | Ibamu itanna (EMC) – Apakan 3-3 Awọn opin – Idiwọn voltage ayipada, voltage sokesile ati flicker ni gbangba kekere-voltage ipese awọn ọna šiše, fun awọn ẹrọ pẹlu ti won won lọwọlọwọ ≤ 16A fun alakoso ati ki o ko koko ọrọ si ni àídájú asopọ 4 |
EN 61347-1 | Lamp Ohun elo Iṣakoso - Apakan 1: Gbogbogbo ati ibeere aabo |
EN 61347-2-11 | Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used withluminaires |
- Iwọn ti o pọju lọwọlọwọ da lori awọn ipo iṣẹ ati iwọn otutu ibaramu ti eto naa. Fun iṣeto ti o tọ, ṣayẹwo agbara ti o pọju ti a le fi jiṣẹ ni apakan Awọn imọ-ẹrọ imọ-ẹrọ ati ni §Iwa-ara Imudara.
- Wiwa iru ẹrọ onirin jẹ laifọwọyi.
- Short Circuit Protection (SCP) is disabled by default. It is recommended to enable this function only on compatible load types (see Table 5) on the dedicated CASAMBI© mobile app section.
- Ibamu pẹlu awọn iṣedede EMC jẹ aṣeyọri ni ọran ti o buruju (ẹru apinfunni 200 W) nipasẹ ohun elo ni àlẹmọ agbawọle to dara.
- For the full range of values, refer to the §Thermal Characterization of the manual.
- Awọn paramita ti wa ni yo lati iṣeto ni ti Casambi module.
- Tamb_max: depends on ventilation conditions
MINI-1AC-CASAMBI
Awọn alaye imọ-ẹrọ
Apejuwe Adape Awọn iye Sipo ti Akiyesi
Min O pọju Iwọn |
|||||||||
INPUT (AC IN Power) | |||||||||
Iforukọsilẹ Ipese Voltage | VIN | 230 | Vac | – | |||||
210 ÷ 240 | Vac | – | |||||||
Ipese Voltage ibiti | VIN-ANG | ||||||||
Mains Igbohunsafẹfẹ | Mama | 50 | Hz | – | |||||
Ṣiṣe ni kikun fifuye | Aṣiṣe | > 95 | A% | – | |||||
Gbigba agbara imurasilẹ | Psray | < 0.5 | W | – | |||||
OUTPUT (AC OW Channel) | |||||||||
O wujade Voltage | Vour | = Nipasẹ | Vac | – | |||||
Output currents (max) | Iatrr | 1.52 | A | – | |||||
Agbara ipin jadeIwọn ti o kere julọ agbara Iru fifuyeDimming ti tẹ | Tú | 350 | W | Da lori iru fifuye ti sopọ, wo Tabili 5 | |||||
PMDALOAD Lflpf CortiI |
1 –Wo Tabili 5DIMMINGLinear• Logarithmic | W– – |
– | ||||||
–* Wa nikan for Local Command | |||||||||
Dimming ọna | MINN Trailing Eti | – | – | ||||||
Ipinnu dimming | Res/mm 1666 1000 | igbese | Setumo nipa ise agbese | ||||||
Dimming ibiti o | RNGoin 5 ÷ 100 | % | Ti o da lori iru fifuye ti a ti sopọ | ||||||
AGBAYE | |||||||||
Awọn Igbohunsafẹfẹ Ṣiṣẹ 6 fop 2402 + 2483 | MHz dBmW |
For CASAMBI° BLE SoC Over Bluetooth transmission | |||||||
O pọju Emitted Power 6 7 | |||||||||
Ibi ipamọ Iwọn otutu TSTG:tE -40 + + 60 | °CAwọn iye ti o kere julọ ti ṣalaye nipasẹ apẹrẹ | ||||||||
Ṣiṣẹ Ibaramu otutu 5‘7 TA –10 + + 60 °C | |||||||||
O pọju Temperature ©T, point Tc – – +80 °C – | |||||||||
WSsouo 0.05 + 2.5 mm2 | Itumọ byproject | ||||||||
Wiring SectionWSSTRAND 30 ÷ 12 I AWGGigun gigun WSSTR1P 6.5 mm | —– | ||||||||
Protection class i Casing Material Packaging unit | IPcco€MuseUP | 1P20 I -PlasticI –1 pcsL A P | |||||||
Awọn iwọn | MD | 44 57 25 I mm | Casing | ||||||
PD | 56 68 35 I mm | Iṣakojọpọ | |||||||
Iwọn | W | 80 I g | – |
ORISI fifuye
Awọn wọnyi tabili fihan awọn orisi ti èyà ti o le wa ni ti sopọ si awọn ti o wu MINI-1AC-CASAMBI.
Fifuye | Apejuwe | Maximum Power [IN] 250 | I SCP Compatibility✓(< 100 VV) | |||
Opolopo lamps / Halogen | ||||||
in | Linear LED Mains Voltage Lamps | 350 | ✓ | |||
1117 | ||||||
LED switching lamps at mains voltage | 300 | ✓ | ||||
LED Strips / Mains Voltage LED modulu | 350 | ✓ | ||||
coke tkrxxxo1 |
||||||
:I.rs4 | ||||||
i si 23/4″ a WAAL LEDDRIVER | Dimmable LED Trailing Edge Drivers | 250 | ✓(<100 W) | |||
Awọn iwe aṣẹ / Awọn orisun
![]() |
DALCNET MINI-1AC LED Dimmer paramita Taara siseto [pdf] Afọwọkọ eni MINI-1AC LED Dimmer Parameters Taara Eto, MINI-1AC, LED Dimmer Parameters Taara Eto, Dimmer parameters |