DALCNET MINI-1AC LED Dimmer Parameters Ka ho Otloloha Bukana ea Mong'a Litlhophiso
LIKAROLOANA
- AC DIMMER + FADER
- Tokiso ea ho khanya ha leseli la WHITE le MONOCHROME
- Phepelo ea motlakase (AC IN): 230 Vac @ 50 Hz, e nang le fuse e ka hare ea 1 A
- Output (AC OUT): 230 Vac Trailing Edge (350 W max), bakeng sa incandescent le halogen lamps, LED switjha lamps, hlobolisa le linear LED lamps, bakhanni ba Trailing Edge ba fokolang
- Local Command (PUSH): N° 1 N.O. push-butto
- Remote control: via Bluetooth Low Energy (BLE) with CASAMBI© mobile app
- Tlhophiso ea lisebelisoa ka CASAMBI© app mobile, parameters e ka behoa (ka Fixture):
- Lekhalo le nyenyefatsang
- Maemo a khanya a holimo le a tlase
- Mosebetsi oa memori: e boloka boemo ba ho qetela ba khanya
- ON/OFF le ho fifala ha bobebe ho khanya
- E loketse ho sebelisoa libakeng tse omileng
- Sebetsa se tlwaelehileng > 95%
- Nako e telele ea mocheso
- 100% Tlhahlobo ea Ts'ebetso
TLHALOSO EA SEHLAHISOA
MINI-1AC-CASAMBI is a single-channel Alternating Current (AC) Trailing Edge dimmer, which can be supplied by 230 Vac mains
power grid and is suitable for driving single-color AC loads such as incandescent and halogen lamps, LED switjha lamps, LED
strips/lamps le bakhanni ba timang ka mokhoa oa Trailing Edge.
The AC dimmer is equipped with an internal 1 A fuse, protecting the internal circuitry, which makes the installation of an external
fuse optional. The maximum output current is 1.52 A and has the following protections: input fuse protection, output short-circuit
protection, short-circuit detection, and output open-circuit detection.
MINI-1AC-CASAMBI can be controlled remotely via Bluetooth or locally via N.O. (Normally Open) button connected to the phase,
neutral or as a dry contact. The type of wiring is recognized when it is turned on and the dimmer is automatically configured to
work with the control connected.
MINI-1AC-CASAMBI enables you to make not only simple brightness adjustments but also more dynamic lighting control systems.
This is made possible through the creation of multiple scenarios, animations, timers, daylight controls, and more.
Through the CASAMBI© mobile application and smartphones equipped with Bluetooth technology, it is possible to configure via
Fixtures multiple parameters, including maximum/minimum brightness levels. CASAMBI© mobile application can be downloaded
free of charge from the Apple APP Store and Google Play Store.
CASAMBI© Mobile App is free to download from the Apple APP Store and Google Play Store
⇢ Bakeng sa bukana ea morao-rao, ka kopo ikopanye le rona websebaka www.dalcnet.com or scan the QR Code on product label.
SEHLAHLWA KHOUTU
| KHOUTU | PHEPELO EA MOTLAKASE | LITLHAKU TSE KHOLO LED | N° SEHLOOHOKHALE | TLHOKOMELOTAolo | SEBAKATAolo | SEBELISA APP |
| MINI-1AC-CASAMBI | 230 Vac @ 50 Hz | 1 x 1.52 a1 | 1 | Bluetooth LowEnergy (BLE) | Pushbutton NO.2 | CASAMBI©app ea mobile |
TS'IRELETSO LETS'OANE
Tafole e latelang e bonts'a mefuta ea ts'ireletso ea ho kena le ea egress e teng ho sesebelisoa.
| KHABANE | TLHALOSO | THEMINALE | TLHOKOMELO |
| IFP | Kenya Tšireletso ea Fuse1 | AC LI | ✔ |
| SCP | Tšireletso ea Potoloho e Khutšoane3 | AC TSOA | ✔ |
| SCD | Ho fumanoa ha Potoloho e Khutšoane | AC TSOA | ✔ |
| OCD | Ho fumanoa ha Potoloho e Bulehileng | AC TSOA | ✔ |
TŠEBELETSO MAEMO
MINI-1AC-CASAMBI e lumellana le melaoana e thathamisitsoeng tafoleng e latelang.
| TS'ELISO | SEHLOOHO |
| EN 55015 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting andsimilar equipment |
| EN 61547 | Thepa bakeng sa mabone a akaretsang - Tlhokahalo ea boits'ireletso ba EMC 4 |
| EN 61000-3-2 | Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions(equipment input current ≤ 16 A per phase) 4 |
| EN 61000-3-3 | Tšebelisano ea motlakase (EMC) - Karolo ea 3-3 Meeli - Moeli oa matlatage liphetoho, voltagLiphetoho le ho panya ha maemo sechabeng tlase voltaglitsamaiso tsa phepelo ea e, bakeng sa lisebelisoa tse nang le tekanyo ea hajoale ≤ 16A ka mohato mme e sa ipapise le khokahano e nang le maemo 4 |
| EN 61347-1 | Lamp Controlgear - Karolo ea 1: Tlhokahalo e akaretsang le polokeho |
| EN 61347-2-11 | Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used withluminaires |
- Nako e phahameng ea tlhahiso ea hona joale e itšetlehile ka maemo a ts'ebetso le mocheso o potolohileng oa tsamaiso. Bakeng sa tlhophiso e nepahetseng, hlahloba matla a mangata a ka fanoang karolong ea §Technical specifications le ho §Thermal Characterization.
- Ho lemoha mofuta oa wiring ho etsoa ka mokhoa o itekanetseng.
- Short Circuit Protection (SCP) is disabled by default. It is recommended to enable this function only on compatible load types (see Table 5) on the dedicated CASAMBI© mobile app section.
- Ho lumellana le litekanyetso tsa EMC ho finyelloa maemong a mabe ka ho fetesisa (mojaro o ikhethileng oa 200 W) ka ts'ebeliso ka sefeneng se loketseng sa ho kena.
- For the full range of values, refer to the §Thermal Characterization of the manual.
- Litekanyetso li tsoa ho tlhophiso ea mojule oa Casambi.
- Tamb_max: depends on ventilation conditions
MINI-1AC-CASAMBI
LIEKETSENG MOKHOPO
| Tlhaloso Kgutsufatso Litekanyetso Diyuniti tsa Hlokomela
Min Max Lekanya |
|||||||||
| INPUT (AC IN Power) | |||||||||
| Nominal Supply Voltage | VIN | 230 | Vac | – | |||||
| 210 ÷ 240 | Vac | – | |||||||
| Phepelo Voltage fapaneng | VIN-ANG | ||||||||
| Mains Frequency | Mme | 50 | Hz | – | |||||
| Ho sebetsa hantle ka mojaro o felletseng | Phoso | > 95 | A% | – | |||||
| Ho monya matla a standby | Psray | <0.5 | W | – | |||||
| OUTPUT (AC OW Channel) | |||||||||
| Khumo Voltage | Vour | = Ka | Vac | – | |||||
| Output currents (max) | Iatrr | 1.52 | A | – | |||||
| Matla a lebitso tlhahisoMoroalo o fokolang matla Mofuta oa mojaroLekhalo le nyenyefatsang | Tšela | 350 | W | E itšetlehile ka mofuta oa mojaro e amanang, sheba Lethathamo la 5 | |||||
| PMDALOAD Lflpf CortiI |
1 –Sheba Lethathamo la 5HO FIHLELALinear• Logarithmic | W– – |
– | ||||||
| –* E fumaneha feela for Local Command | |||||||||
| Ho fifala mokhoa | MINN Trailing Qetello | – | – | ||||||
| Qeto ea ho fifala | Res/mm 1666 1000 | mohato | E hlalosoa ke morero | ||||||
| Lebala la dimming | RNGoin 5 ÷ 100 | % | E itšetlehile ka mofuta oa mojaro o hokahantsoeng | ||||||
| TIKOLOHO | |||||||||
| Maqhubu a Tshebetso 6 fop 2402 + 2483 | MHz dBmW |
For CASAMBI° BLE SoC Over Bluetooth transmission | |||||||
| Boholo bo Emited Matla 6 7 | |||||||||
| Polokelo Mocheso TSTG:tE -40 + +60 | °CBonyane ba boleng bo hlalosoang ke moralo | ||||||||
| Ho sebetsa Mocheso oa tikoloho 5‘7 TA –10 + +60 °C | |||||||||
| Max Temperature ©T, point Tc – – +80 °C – | |||||||||
| WSsouo 0.05 + 2.5 mm2 | E hlalositsoe byproject | ||||||||
| Wiring SectionWSSTRAND 30 ÷ 12 I AWGBolelele ba ho hlobola WSSTR1P 6.5 mm | —– | ||||||||
| Protection class i Casing Material Packaging unit | IPcco€MuseUP | 1P20 I -PlasticI –1 pcsL A P | |||||||
| Litekanyo | MD | 44 57 25 I mm | Casing | ||||||
| PD | 56 68 35 I mm | Sephutheloana | |||||||
| Boima ba 'mele | W | 80 I g | – | ||||||
MOFUTA MOJARO
Tafole e latelang e bontša mefuta ea meroalo e ka kopanngoang le tlhahiso ea MINI-1AC-CASAMBI.
| Laela | Tlhaloso | Maximum Power [IN] 250 | I SCP Compatibility✓(< 100 VV) | |||
| Lithako tsa motlakase Lamps / Halogen | ||||||
| in | Linear LED Mains Voltage Lamps | 350 | ✓ | |||
| 1117 | ||||||
| LED switching lamps at mains voltage | 300 | ✓ | ||||
| LED Strips / Mains Voltage LED Modules | 350 | ✓ | ||||
| cpalo tkrxxxo1 |
||||||
| :I.rs4 | ||||||
| i si 23/4″ a WAAL LEDDRIVER | Dimmable LED Trailing Edge Drivers | 250 | ✓(< 100 W) | |||
Litokomane / Lisebelisoa
 |
DALCNET MINI-1AC LED Dimmer Parameters ka ho toba [pdf] Buka ea Mong'a MINI-1AC LED Dimmer Parameters ka ho toba, MINI-1AC, LED Dimmer Parameters ka ho toba, Dimmer Parameters Directly Programmable, Parameters Directly Programmable, Directly Programmable, Programmable |