QUIO QU-RDT2-HF Touch Keypad LCD Display Reader
Ulwazi lweMveliso
- Igama lemveliso: I-QU-RDT2-HF
- Inkcazo: Chukumisa iphedi yesitshixo seLCD sokuBonisa
- Inombolo yoMfanekiso: V0103
Iinkcukacha
| Spec / Into | I-QU-RDT2-HF |
|---|---|
| Ukuhambisa Rhoqo | 125KHz / 13.56MHz |
| Funda uluhlu | 5 ~ 10cm / 2 ~ 6cm |
| Ireyithi yeBaud | 19,200 bps (4,800~230,400 bps) |
| Ukuhambelana kweKhadi | EM okanye ISO14443A/B/15693/Mifare |
| Ixesha lokufunda iKhadi | 0.1Sec |
| Iphedi yezitshixo | 12 izitshixo |
| Isalathisi se-LED | I-3 LED (RGB) |
| Isazisi soNxibelelwano | RS485 kunye Wiegand (26/32/34/42/66 Bits) |
| Umboniso weLCD | 128×64 Amachaphaza (16×4 Char) LCD kunye backlight |
| Umchasi-Tamper Indawo | Yakhelwe ngaphakathi (IR) |
| Beep Ithoni | I-Buzzer eyakhelwe-ngaphakathi |
| Igalelo Voltage | 8V ~ 28V DC / 0.5 ~ 2W |
| Ubungakanani (W x H x D) | 89.4 x 124 x 12 mm |
Imiyalelo yokusetyenziswa kwemveliso
Inqaku lokuhlohla:
Le mveliso isebenzisa iphaneli yokuchukumisa. Xa ufaka kwaye uqinisa izikrufu, landela la manyathelo:
- Cima isixhobo kangangemizuzwana emi-5.
- Ngeli xesha, ungachukumisi ipaneli yokuchukumisa okanye ubeke nantoni na kuyo.
- Emva kwexesha lokucima kombane, qalisa ngokutsha isixhobo.
Le nkqubo iyimfuneko kuhlengahlengiso lwephaneli kunye nokubalwa kwakhona komsebenzi wokulawula ukuthintela ukuqinisekisa ukusebenza okuchanekileyo nokuchanekileyo.
QU-RDT2-HF Imiyalelo:
Misela:
- Ngema: # + # + 0 + 1 (Beep) + I-PIN + # (I-PIN yoMzi-mveliso: 1234)
- Phuma: # + # + 0 + 0 (Beep)
Umiselo lwesazisi:
- Ngena kuqala, emva koko wenze oluseto lulandelayo:
- Seta i-ID: # + # + 0 + 2 (Beep) + ID (ID yoMzimveliso: 1)
- Seta Umhla kunye nexesha: # + # + 0 + 3 (Beep) + YYYYMMDDhhnnss (umzekelo, 20110129032523 ngoJanuwari 29, 2011, 03:25:23)
- Guqula i-PIN yokuNgena: # + # + 0 + 4 (Beep) + I-PIN Entsha
- Cwangcisa ukulibaziseka kwesibane: # + # + 0 + 5 (Beep) + Ixesha (0 ukuze ukukhanya kuzinzile, 1-250 imizuzwana)
- Seta Ujongano: # + # + 0 + 6 (Beep) + Ujongano (0 lwe Wiegand, 1 lwe RS485, 2 lwe Wiegand & RS485, Factory: 2)
- Seta ulwimi: # + # + 0 + 7 (Beep) + Ulwimi (0 ngesiNgesi, 1 yesiTshayina, iFactory: 0 – IsiNgesi)
- Seta Ikhowudi: # + # + 0 + 8 (Beep) + Encode (0 ye UNICODE, 1 ye BIG5, 2 ye GB2312, Factory: 0 – UNICODE)
- Seta ubume: # + # + 0 + 9 (Beep) + Udidi (0 lokuKhubaza, 1 lwe-Vulela, uMzi-mveliso: 0 – Khubaza)
Guqula Isimo Somsebenzi:
- Qala umsebenzi: # + 1 (Beep)
- Gqiba umsebenzi: # + 2 (Beep)
Hamba emsebenzini:
- # + 3 (Beep)
Nceda uvule uMsebenzi weNdawo kuqala.
Buyela eMsebenzini:
- Qalisa ixesha elongezelelweyo: # + 4 (Beep)
- Gqibezela ixesha elongezelelekileyo: # + 5 (Beep)
- # + 6 (Beep)
Inkcazo ye-QU-RDT2-HF
Inkcazo / Into ye-QU-RDT2-HF
- Ukuhambisa Rhoqo 125KHz / 13.56MHz
- Funda uluhlu 5 ~ 10cm / 2 ~ 6cm
- Ireyithi yeBaud 19,200 bps (4,800~230,400 bps)
- Ukuhambelana kweKhadi EM okanye ISO14443A/B/ 15693 / Mifare
- Ixesha lokufunda iKhadi 0.1Sec
- Iphedi yezitshixo 12 izitshixo
- Isalathisi se-LED I-3 LED (RGB)
- Unxibelelwano RS485 kunye Wiegand (26/32/34/42/66 Bits)
- ID 0001 ~ 9,999
- Umboniso weLCD 128×64 Amachaphaza (16×4 Char) LCD kunye backlight
- Umchasi-Tamper Indawo eyakhelwe-ngaphakathi(IR)
- Beep Ithoni I-Buzzer eyakhelwe-ngaphakathi
- Ubushushu bokusebenza -10˚C~60˚C
- Igalelo Voltage 8V ~ 28V DC / 0.5 ~ 2W
- Ubungakanani (W x H x D) 89.4 x 124 x 12 mm
Inqaku lokuhlohla
- Le mveliso isebenzisa iphaneli yokuchukumisa. xa ufaka kwaye uqinise izikhonkwane, nceda UVALE ngaphezu kwemizuzwana emi-5, kwaye ngeli xesha,
- NCEDA UNGABEKI nantoni na kwiqela lenjongo yokubamba (umz. Finger..etc) uze uqalise kwakhona.
- Le nkqubo yeyokulinganisa indawo yolawulo nokubala kwakhona umsebenzi wokulawula uchuku, ukuqinisekisa ukuba inokusebenza ngokuchanekileyo nangokuchanekileyo.
Imiyalelo ye-QU-RDT2-HF
Cacileyo:'✱'
Guqula ubume boMsebenzi:
Nceda uvule uMsebenzi weNdawo kuqala.
Quick-Ohm Küpper & Co. GmbH
Cronenfelderstraße 75 | 42349 Wuppertal
Umnxeba: +49 (0) 202 404329 | Ifeksi: +49 (0) 202 404350
I-imeyile: kontakt@quio-rfid.de Web: www.quio-rfid.de
Amaxwebhu / Izibonelelo
 |
QUIO QU-RDT2-HF Touch Keypad LCD Display Reader [pdf] Isikhokelo soFakelo QU-RDT2-HF Touch Keypad LCD Display Reader, QU-RDT2-HF, Touch Keypad LCD Bonisa Reader, Keypad LCD Bonisa Reader, LCD Bonisa Reader, Bonisa Reader, Reader |
