QUIO QU-RDT2-HF Bata Keypad LCD Ratidza Reader
Product Information
- Product Name: QU-RDT2-HF
- Tsanangudzo: Bata Keypad LCD Ratidza Reader
- Model Number: V0103
Zvinotsanangurwa
| Spec / Chinhu | QU-RDT2-HF |
|---|---|
| Fambisa Frequency | 125KHz / 13.56MHz |
| Verenga Range | 5 ~ 10cm / 2 ~ 6cm |
| Baud Rate | 19,200 bps (4,800~230,400 bps) |
| Kadhi Kuenderana | EM kana ISO14443A/B/15693/Mifare |
| Nguva Yekuverenga Kadhi | 0.1Sec |
| Keypad | 12 makiyi |
| Chiratidzo che LED | 3 LED (RGB) |
| Communication ID | RS485 uye Wiegand (26/32/34/42/66 Bits) |
| Chiratidziro cheLCD | 128×64 Dots (16×4 Char) LCD ine backlight |
| Kurwisa-Tamper Nzvimbo | Yakavakwa-mukati (IR) |
| Beep Tone | Yakavakwa-muBuzzer |
| Chiyamuro Voltage | 8V~28V DC / 0.5 ~ 2W |
| Dimension (W x H x D) | 89.4 x 124 x 12 mm |
Mirayiridzo Yekushandiswa Kwechigadzirwa
Kuiswa Note:
Ichi chigadzirwa chinoshandisa touch panel. Paunenge uchiisa nekusimbisa screws, tevera matanho aya:
- Dzima mudziyo kweanenge masekonzi mashanu.
- Munguva iyi, usabata bata rekubata kana kuisa chero chinhu pairi.
- Mushure mekudzima nguva, tangazve mudziyo.
Iyi nzira inodiwa pakugadzirisa mapaneru uye kuverengerazve kwekubata kutonga basa kuti ive nechokwadi uye kwakaringana kushanda.
QU-RDT2-HF Mirayiridzo:
Gadzirira:
- Login: # + # + 0 + 1 (Beep) + PIN + # (Factory PIN: 1234)
- Kubuda: # +# + 0 + 0 (Beep)
ID Setup:
- Pinda kutanga, wozoita zvinotevera marongero:
- Seta ID: # + # + 0 + 2 (Beep) + ID (Factory ID: 1)
- Seta Zuva uye Nguva: # + # + 0 + 3 (Beep) + YYYYMMDDhhnnss (semuenzaniso, 20110129032523 yaNdira 29, 2011, 03:25:23)
- Shandura Pini Yekupinda: # + # + 0 + 4 (Beep) + PIN Itsva
- Seta Backlight Kunonoka: # + # + 0 + 5 (Beep) + Nguva (0 yekudzikama kwechiedza, masekonzi 1-250)
- Seta Interface: # + # + 0 + 6 (Beep) + Interface (0 yeWiegand, 1 yeRS485, 2 yeWiegand & RS485, Factory: 2)
- Seta Mutauro: # + # + 0 + 7 (Beep) + Mutauro (0 weChirungu, 1 weChinese, Fekitari: 0 - Chirungu)
- Seta Encode: # + # + 0 + 8 (Beep) + Encode (0 yeUNICODE, 1 yeBIG5, 2 yeGB2312, Fekitari: 0 – UNICODE)
- Set Status: # + # + 0 + 9 (Beep) + Kirasi (0 for Disable, 1 for Gonesa, Fekitari: 0 – Disable)
Chinja Mamiriro Ebasa:
- Tanga Basa: # + 1 (Beep)
- Pedza basa: # + 2 (Beep)
Leave on Duty:
- # + 3 (Beep)
Ndapota vhura Status Function kutanga.
Kudzokera Kubasa:
- Tanga Overtime: # + 4 (Beep)
- Pedzisa Nguva Yakawedzerwa: # + 5 (Beep)
- # + 6 (Beep)
QU-RDT2-HF Tsanangudzo
Chinhu QU-RDT2-HF
- Fambisa Frequency 125KHz / 13.56MHz
- Verenga Range 5 ~ 10cm / 2 ~ 6cm
- Baud Rate 19,200 bps (4,800~230,400 bps)
- Kadhi Kuenderana EM kana ISO14443A/B/ 15693 / Mifare
- Nguva Yekuverenga Kadhi 0.1Sec
- Keypad 12 makiyi
- Chiratidzo che LED 3 LED (RGB)
- Kukurukurirana RS485 uye Wiegand (26/32/34/42/66 Bits)
- ID 0001 ~ 9,999
- Chiratidziro cheLCD 128×64 Dots (16×4 Char) LCD ine backlight
- Kurwisa-Tamper Nzvimbo Yakavakwa-mukati(IR)
- Beep Tone Yakavakwa-muBuzzer
- Operating Temperature -10˚C ~ 60˚C
- Chiyamuro Voltage 8V~28V DC / 0.5 ~ 2W
- Dimension (W x H x D) 89.4 x 124 x 12 mm
Kuisa Cherechedzo
- Ichi chigadzirwa chinoshandisa touch panel. pawakaisa nekusimbisa screws, ndapota SIMBA DZIMA pamusoro pe5 masekonzi, uye munguva ino,
- PLEASE USAisa chero chinhu pane yekubata (eg Finger..etc) wobva watangazve.
- Iyi nzira ndeyekuyeresa mapaneru uye kuverengera kubata kubata kutonga basa, kuve nechokwadi kuti inogona kushanda nemazvo uye nemazvo.
QU-RDT2-HF Mirayiridzo
Zvakajeka:'✱'
Shandura Mamiriro Ebasa:
Ndapota vhura Status Function kutanga.
Quick-Ohm Küpper & Co. GmbH
Cronenfelderstraße 75 | 42349 Wuppertal
Tel: +49 (0) 202 404329 | Fax: +49 (0) 202 404350
E-Mail kontakt@quio-rfid.de Web: www.quio-rfid.de
Zvinyorwa / Zvishandiso
 |
QUIO QU-RDT2-HF Bata Keypad LCD Ratidza Reader [pdf] Installation Guide QU-RDT2-HF Bata Keypad LCD Ratidza Reader, QU-RDT2-HF, Bata Keypad LCD Ratidza Reader, Keypad LCD Ratidza Reader, LCD Ratidza Reader, Ratidza Reader, Reader |
