ScanLog Multi-Channel Data-Logger
Ulwazi lweMveliso: I-ScanLog (i-PC) 4 / 8 / 16 i-Channel Recorder + i-PC Interface
- NgoJanuwari 2022
- Incwadi yoMsebenzi
- Yenzelwe ireferensi ekhawulezayo yokudityaniswa kweengcingo kunye nokukhangela iparameter
- Ukufumana iinkcukacha ezithe vetshe malunga nokusebenza kunye nesicelo, tyelela www.ppiindia.net
- Ifumaneka kwi-101, iDiamond Industrial Estate, iNavghar, iVasai Road (E), iDist. Palghar – 401 210
- Iintengiso: 8208199048 / 8208141446
- Inkxaso: 07498799226 / 08767395333
- I-imeyile: sales@ppiindia.net, support@ppiindia.net
Imiyalelo yokusetyenziswa kwemveliso:
Ukusebenzisa iScanLog (PC) 4/8/16 Irekhoda yesitishi + isinxibelelanisi sePC, landela la manyathelo angezantsi:
Iiparamitha zoMsebenzisi:
Seta isiqalo sebhetshi, ibhalansi yexesha lokumisa ibhetshi yokumisa, kunye nezicwangciso zokufunda kuphela. Khetha ukuba wenze ibhetshi iqale okanye hayi kwaye uyeke ibhetshi.
Iisetingi zeAlam
Khetha itshaneli kunye nodidi lwesivusi. Khetha phakathi ko-"Akukho," "Inkqubo ePhantsi," okanye "iNkqubo ePhezulu" yohlobo lwe-AL1. Seta i-AL1 yokubeka kunye ne-hysteresis. Khetha ukuba wenze okanye hayi ukwenza i-AL1 inhibit. Olona khetho lukhoyo luxhomekeke kumanani ee-alam ezisetwe kwisitishi ngasinye kwiphepha loqwalaselo lweAlarm.
Ubumbeko besiXhobo:
Khetha ukuba uzicime okanye ungazicimi iirekhodi. Seta i-ID yoshicilelo ukusuka kwi-1 ukuya kwi-127.
Ubumbeko lweSitishi:
Khetha ukuba usebenzise okanye ungasebenzisi zonke izicwangciso zeChan Common. Khetha isitishi kunye nohlobo longeniso. Jonga kwiTheyibhile yoku-1 ngesethingi yohlobo longeniso. Seta isignali ephantsi, isignali ephezulu, uluhlu olusezantsi, uluhlu oluphezulu, ukunqunyulwa okuphantsi, ixabiso lekliphu eliphantsi, ukunqunyulwa okuphezulu, ixabiso lekliphu ephezulu, kunye ne-zero offset.
Ubumbeko lweAlam:
Seta inani leealam kwitshaneli nganye ukusuka kwisi-1 ukuya kwisi-4.
Ulungelelwaniso lwesishicileli:
Seta ikhefu lesiqhelo ukusuka ku-0:00:00 (H:MM:SS) ukuya ku-2:30:00 (H:MM:SS). Khetha ukuba wenze okanye ungenzi isithuba sokwandisa, i-alam yokuguqula, kunye nemo yokurekhoda. Khetha phakathi kwemowudi "Eqhubekayo" okanye "Ibhetshi". Cwangcisa ixesha lebhetshi, kwaye ukhethe ukuba ungavumela ukuqala kwebhetshi kunye nokuyeka ibhetshi.
Useto lwe-RTC:
Seta ixesha (HH:MM), umhla, inyanga, unyaka, kunye nenombolo ye-ID eyodwa (ungahoyi).
Izinto eziluncedo:
Khetha ukuba uyasitshixa okanye ungasitshixa isixhobo.
IScanLog (PC)
I-4 / 8 / 16 Irekhoda yesitishi + i-PC Interface
Le ncwadana imfutshane yenzelwe ireferensi ekhawulezayo kuqhagamshelo lweingcingo kunye nokukhangela iparameter. Ukufumana iinkcukacha ezithe vetshe malunga nokusebenza kunye nesicelo; nceda ungene ku www.ppiindia.net
| IIPARAMETHA ZOMSEBENZI | |
| Iiparamitha | Iisetingi |
| Iqela lokuqala | Hayi Ewe |
| Balance Slot Ixesha | Funda uqhubeleke |
| Batch Stop | Hayi Ewe |
| IISENGO ZE-ALARM | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Khetha iShaneli | PC Version
Kwi-4C: Ijelo-1 ukuya Umjelo-4 Kwi-8C: Ijelo-1 ukuya Umjelo-8 Kwi-16C: Ijelo-1 ukuya Umjelo-16 |
| Khetha iAlam | AL1, AL2, AL3, AL4
(Olona khetho lukhoyo luxhomekeke kumanani eeAlam ezisetwe ngetshaneli nganye Iphepha loqwalaselo lwe-alam) |
| AL1 Uhlobo | Akukho Inkqubo ePhantsi iPhezulu (Ehlala ikho: Akukho nanye) |
| Iseti ye-AL1 | Min. kuMax. yoluhlu olukhethiweyo lohlobo lwegalelo (Okuhlala kukho: 0) |
| AL1 Hysteresis | 1 ukuya 30000 (Okuhlala kukho: 20) |
| AL1 Inhibit | Hayi Ewe (Okuhlala kukho: Hayi) |
| UQINISEKISO LWESIXHOBO | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Cima iiRekhodi | Hayi Ewe
(Okuhlala kukho : Hayi) |
| Isazisi soMshicileli | 1 ukuya 127
(Okuhlala kukho : 1) |
| UQINISEKISO LWESHISHINI | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Zonke Chan Common | Hayi Ewe (Okuhlala kukho : Hayi) |
| Khetha iShaneli | PC Version
Kwi-4C: Ijelo-1 ukuya Umjelo-4 Kwi-8C: Ijelo-1 ukuya Umjelo-8 Kwi-16C: Ijelo-1 ukuya Umjelo-16 |
Iiparamitha: Izicwangciso (Ixabiso eliMiselweyo)
Uhlobo lweNgeniso: Itheyibhile yokuJonga 1 (Okumiselweyo: 0 ukuya ku-10 V)
Isisombululo: Itheyibhile yokuJonga 1
Umqondiso uPhantsi
| Uhlobo Longeniso | Iisetingi | Ukuhlala kukho |
| 0 ukuya kwi-20mA | 0.00 ukuya kuMqondiso oPhezulu | 0.00 |
| 4 ukuya kwi-20mA | 4.00 ukuya kuMqondiso oPhezulu | 4.00 |
| 0 ukuya kwi-80mV | 0.00 ukuya kuMqondiso oPhezulu | 0.00 |
| 0 ukuya ku-1.25V | 0.000 ukuya kuMqondiso oPhezulu | 0.000 |
| 0 ukuya ku-5V | 0.000 ukuya kuMqondiso oPhezulu | 0.000 |
| 0 ukuya ku-10V | 0.00 ukuya kuMqondiso oPhezulu | 0.00 |
| 1 ukuya ku-5V | 1.000 ukuya kuMqondiso oPhezulu | 1.000 |
Umqondiso Phezulu
| Uhlobo Longeniso | Iisetingi | Ukuhlala kukho |
| 0 ukuya kwi-20mA | Umqondiso oPhantsi ukuya kwi-20.00 | 20.00 |
| 4 ukuya kwi-20mA | Umqondiso oPhantsi ukuya kwi-20.00 | 20.00 |
| 0 ukuya kwi-80mV | Umqondiso oPhantsi ukuya kwi-80.00 | 80.00 |
| 0 ukuya ku-1.25V | Umqondiso oPhantsi ukuya kwi-1.250 | 1.250 |
| 0 ukuya ku-5V | Umqondiso oPhantsi ukuya kwi-5.000 | 5.000 |
| 0 ukuya ku-10V | Umqondiso oPhantsi ukuya kwi-10.00 | 10.00 |
| 1 ukuya ku-5V | Umqondiso oPhantsi ukuya kwi-5.000 | 5.000 |
Uluhlu oluPhantsi: -30000 ukuya +30000 (Okuhlala kukho: 0)
Uluhlu oluPhezulu: -30000 ukuya +30000 (Okumiselweyo: 1000)
Ukuklipha okuPhantsi: Khubaza Yenza (Okuhlala kukho : Khubaza)
I-Low Clip Val: -30000 ukuya kwi-High Clip Val (Okuhlala kukho: 0)
Ukucofa okuphezulu: Khubaza ukuVula (Okuhlala kukho : Khubaza)
I-High Clip Val: I-Low Clip Val ukuya kwi-30000 (Okumiselweyo: 1000)
I-Zero Offset: -30000 ukuya +30000 (Okuhlala kukho: 0)
| UKULUNGISWA KWE-ALARM | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Iialamu/Chan | 1 ukuya 4
(Okuhlala kukho : 4) |
| UKULUNGISWA KWEREKHODI | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Ikhefu eliqhelekileyo | 0:00:00 (H:MM:SS) ukuya 2:30:00 (H:MM:SS) (Okuhlala kukho : 0:00:30) |
| Isithuba sokwandisa | 0:00:00 (H:MM:SS) ukuya 2:30:00 (H:MM:SS) (Okuhlala kukho : 0:00:10) |
| I-Alarm Toggl Rec | Khubaza Yenza (Okuhlala kukho : Vulela) |
| Imo Yokurekhoda | Iqela eliqhubekayo (Okuhlala kukho : Ukuqhubekeka) |
| Ixesha leBatch | 0:01 (HH:MM) ukuya 250:00 (HHH:MM) (Okuhlala kukho : 1:00) |
| Iqela Qala Ibhetshi Stop | Hayi Ewe |
| USEKO lwe-RTC | |
| Iiparamitha | Iisetingi |
| Ixesha (HH:MM) | 0.0 ukuya ku-23:59 |
| Umhla | 1 ukuya 31 |
| Inyanga | 1 ukuya 12 |
| Unyaka | 2000 ukuya 2099 |
| Inombolo ye-ID eyodwa (Ungahoyi) |
|
| IZIBONELELO | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Vala ukuvula | Hayi Ewe (Okuhlala kukho : Hayi) |
| Umzi-mveliso oMiselweyo | Hayi Ewe (Okuhlala kukho : Hayi) |
| ULUHLU 1 | ||
| Ukhetho | Uluhlu (Ubuncinci ukuya kuMax.) | Isisombululo kunye neYunithi |
| Uhlobo J (Fe-K) | 0.0 ukuya +960.0°C |
1 °C or 0.1 °C |
| Uhlobo K (Cr-Al) | -200.0 ukuya +1376.0°C | |
| Uhlobo T (Cu-Con) | -200.0 ukuya +387.0°C | |
| Uhlobo R (Rh-13%) | 0.0 ukuya +1771.0°C | |
| Uhlobo S (Rh-10%) | 0.0 ukuya +1768.0°C | |
| Uhlobo B | 0.0 ukuya +1826.0°C | |
| Uhlobo N | 0.0 ukuya +1314.0°C | |
| Igcinelwe uhlobo oluthile lomthengi lweThermocouple olungadweliswanga ngasentla. Uhlobo luya kuchazwa ngokuhambelana nomyalelo (ukhetho ngesicelo) uhlobo lweThermocouple. | ||
| RTD PT100 | -199.9 ukuya +600.0°C | 1°C or 0.1 °C |
| 0 ukuba 20 mA |
-30000 ukuba 30000 iiyunithi |
1 0.1 0.01 0.001 iiyunithi |
| 4 ukuba 20 mA | ||
| 0 ukuya 80 mV | ||
| Igciniwe | ||
| 0 ukuya ku-1.25 V |
-30000 ukuba 30000 iiyunithi |
|
| 0 ukuya ku-5 V | ||
| 0 ukuya ku-10 V | ||
| 1 ukuya ku-5 V | ||
| IZIQHOBO ZEPHAneli ANGAPHAMBILI | ||
| Uphawu | Isitshixo | Umsebenzi |
 |
Skrola | Cinezela ukuskrola kwiiSkrini zoLwazi lweNkqubo ezahlukeneyo kwiMowudi yokuSebenza eqhelekileyo. |
 |
I-Alarm Yazisa | Cofa ukuvuma / ukuthulisa imveliso ye-alam (ukuba iyasebenza) & ku view Iscreen seAlarm Status. |
 |
PHANTSI |
Cinezela ukwehlisa ixabiso lepharamitha. Ukucofa kanye kunciphisa ixabiso ngokubalo olunye; ukugcina ucinezele isantya phezulu utshintsho. |
 |
UP |
Cofa ukwandisa ixabiso leparameter. Ukucofa kanye kwandisa ixabiso ngokubalo olunye; ukugcina ucinezele isantya phezulu utshintsho. |
 |
MISELA | Cofa ukungena okanye ukuphuma kwimo yokuseta. |
 |
NGENA | KwiMowudi YokuSebenza, cofa ukutshintshela phakathi kweMowudi yokuSetyenziswa kunye neManuwali yokuSkena. (Kuphela kuguqulelo lweChaneli eli-16)
KwiMowudi yokuSeta, cofa ukugcina ixabiso lepharamitha eseti kwaye uskrolele kwiparamitha elandelayo. |
UKUSONQONGA NGEZIKHIWO EZAHLUKENEYO
Isikrini esiboniswe ngezantsi se-4 Channel Version. Ulandelelwano luyafana kwi-8 & 16 Channel Version.
VIEWISIKHONZO SESIKHUNI SOMEKO WE-ALARM 
Isitishi esi-16 esineZiphumo zoKulayishwa kweAlarm 
UKUQHAGAMSHELWA KOMbane
Ijelo le-4 ngaphandle kweZiphumo ze-Alarm Relay
Isitishi esi-4 esineZiphumo zoKulayishwa kweAlarm 
Ijelo le-8 ngaphandle kweZiphumo ze-Alarm Relay 
Isitishi esi-8 esineZiphumo zoKulayishwa kweAlarm
Amaxwebhu / Izibonelelo
 |
PPI ScanLog Multi-Channel Data-Logger [pdf] Incwadi Yomyalelo I-ScanLog Multi-Channel Data-Logger, i-Multi-Channel Data-Logger, i-Data-Logger, i-Data-Logger, i-Logger |
