ScanLog Multi-Channel Data-Logger
Khoom Qhia: ScanLog (PC) 4 / 8 / 16 Channel Recorder + PC Interface
- Peb Hlis 2022
- Phau ntawv ua haujlwm
- Tsim los rau kev siv ceev ceev rau kev sib txuas ntawm kev sib txuas thiab kev tshawb nrhiav parameter
- Yog xav paub ntxiv txog kev ua haujlwm thiab daim ntawv thov, mus saib www.ppiindia.net
- Nyob ntawm 101, Pob Zeb Diamond Industrial Estate, Navghar, Vasai Road (E), Dist. Palghar – 401 210
- Muag: 8208199048 / 8208141446
- Txhawb nqa: 07498799226 / 08767395333
- Email: sales@ppiindia.net, support@ppiindia.net
Cov lus qhia siv khoom:
Txhawm rau siv ScanLog (PC) 4 / 8 / 16 Channel Recorder + PC Interface, ua raws cov kauj ruam hauv qab no:
Operator Parameters:
Teem batch pib, sib npaug lub sij hawm batch nres, thiab nyeem nkaus xwb. Xaiv seb puas los yog tsis ua kom batch pib thiab batch nres.
Tswb Settings
Xaiv cov channel thiab tswb hom. Xaiv ntawm "Tsis Muaj," "Cov Txheej Txheem Tsawg," lossis "Cov Txheej Txheem Siab" rau hom AL1. Teem lub AL1 setpoint thiab hysteresis. Xaiv seb puas los yog tsis ua kom AL1 inhibit. Cov kev xaiv muaj tiag yog nyob ntawm cov xov tooj ntawm lub tswb teeb tsa ib channel ntawm nplooj ntawv teeb tsa tswb.
Device Configuration:
Xaiv seb puas yuav rho tawm cov ntaub ntawv. Teem lub recorder ID los ntawm 1 txog 127.
Channel Configuration:
Xaiv seb puas yuav siv txhua qhov chaw Chan Common. Xaiv cov channel thiab hom kev nkag. Xa mus rau Table 1 rau kev teeb tsa hom nkag. Teem lub teeb liab qis, teeb liab siab, ntau yam tsawg, ntau yam siab, qis clipping, qis clip tus nqi, siab clipping, siab clip tus nqi, thiab xoom offset.
Tswb Configuration:
Teem tus naj npawb ntawm lub tswb rau ib channel ntawm 1 txog 4.
Recorder Configuration:
Teem lub sijhawm ib txwm los ntawm 0: 00: 00 (H: MM: SS) txog 2: 30: 00 (H: MM: SS). Xaiv seb puas los yog tsis ua kom zoom ncua sij hawm, tswb toggle, thiab kaw hom. Xaiv ntawm "Nruam" lossis "Batch" hom. Teem lub sij hawm batch, thiab xaiv seb puas yuav pab kom batch pib thiab batch nres.
RTC teeb tsa:
Teem sijhawm (HH:MM), hnub tim, hli, xyoo, thiab tus lej ID tshwj xeeb (tsis quav ntsej).
Khoom siv:
Xaiv seb puas yuav xauv lossis xauv lub cuab yeej.
ScanLog (PC)
4/8/16 Channel Recorder + PC Interface
Phau ntawv luv luv no feem ntau yog txhais tau rau kev siv ceev ceev rau kev sib txuas ntawm kev sib txuas thiab kev tshawb nrhiav parameter. Yog xav paub ntxiv txog kev ua haujlwm thiab kev thov; thov nkag mus rau www.ppiindia.net
| PERATOR PARAMETERS | |
| Tsis muaj | Chaw |
| Batch Pib | Tsis Yog |
| Sib npaug Slot Sijhawm | Nyeem nkaus xwb |
| Batch nres | Tsis Yog |
| TEEB MEEM | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Xaiv Channel | PC Version
Rau 4C: Channel-1 rau Channel-4 Rau 8C: Channel-1 rau Channel-8 Rau 16C: Channel-1 rau Channel-16 |
| Xaiv lub tswb | AL1, AL2, AL3, AL4
(Cov kev xaiv muaj tiag yog nyob ntawm tus lej ntawm Alarms teem rau ib channel rau Tswb configuration page) |
| AL1 Hom | Tsis muaj txheej txheem qis txheej txheem siab (Default: Tsis muaj) |
| AL1 Setpoint | Min. rau Max. ntawm xaiv input hom ntau yam (Default: 0) |
| AL1 Hysteresis | 1 txog 30000 (Default: 20) |
| AL1 Inhibit | Tsis Yog (Default: Tsis yog) |
| KEV TIV THAIV | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Rho tawm cov ntaub ntawv | Tsis Yog
(Default: Tsis yog) |
| Tus ID nkag mus | 1 rau 127
(Default: 1) |
| CHANNEL CONFIGURATION | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Txhua tus Chan Common | Tsis Yog (Default: Tsis yog) |
| Xaiv Channel | PC Version
Rau 4C: Channel-1 rau Channel-4 Rau 8C: Channel-1 rau Channel-8 Rau 16C: Channel-1 rau Channel-16 |
Parameters: Kev teeb tsa (Tus nqi Default)
Hom tswv yim: Xa mus rau Table 1 (Default: 0-10V)
Resolution: Saib Table 1
Teeb liab qis
| Hom tswv yim | Chaw | Default |
| 0 txog 20mA | 0.00 rau Signal High | 0.00 |
| 4 txog 20mA | 4.00 rau Signal High | 4.00 |
| 0 rau 80mv | 0.00 rau Signal High | 0.00 |
| 0 rau 1.25v | 0.000 rau Signal High | 0.000 |
| 0 rau 5v | 0.000 rau Signal High | 0.000 |
| 0 rau 10v | 0.00 rau Signal High | 0.00 |
| 1 rau 5v | 1.000 rau Signal High | 1.000 |
Teeb liab siab
| Hom tswv yim | Chaw | Default |
| 0 txog 20mA | Teeb liab qis rau 20.00 | 20.00 |
| 4 txog 20mA | Teeb liab qis rau 20.00 | 20.00 |
| 0 rau 80mv | Teeb liab qis rau 80.00 | 80.00 |
| 0 rau 1.25v | Teeb liab qis rau 1.250 | 1.250 |
| 0 rau 5v | Teeb liab qis rau 5.000 | 5.000 |
| 0 rau 10v | Teeb liab qis rau 10.00 | 10.00 |
| 1 rau 5v | Teeb liab qis rau 5.000 | 5.000 |
Ntau Yam Tsawg: -30000 txog +30000 (Default: 0)
Qhov siab: -30000 txog +30000 (Default: 1000)
Low Clipping: Disable Enable (Default: Disable)
Low Clip Val: -30000 rau High Clip Val (Default: 0)
High Clipping: Disable Enable (Default: Disable)
High Clip Val: Tsawg Clip Val rau 30000 (Default: 1000)
Zero Offset: -30000 rau +30000 (Default: 0)
| ALAR CONFIGURATION | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Tswb/Chan | 1 rau 4
(Default: 4) |
| COV KEV PAB CUAM | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Nquag Interval | 0:00:00 (H:MM:SS) rau 2:30:00 (H:MM:SS) (Default: 0:00:30) |
| Zoom Interval | 0:00:00 (H:MM:SS) rau 2:30:00 (H:MM:SS) (Default: 0:00:10) |
| Tswb Toggl Rec | Lov tes Enable (Default: Enable) |
| Hom kaw lus | Nruam Batch (Default: Nruam) |
| Batch Sijhawm | 0:01 (HH: MM) rau 250:00 (HHH: MM) (Default: 1:00) |
| Batch Start Batch Stop | Tsis Yog |
| RTC SETTING | |
| Tsis muaj | Chaw |
| Sijhawm (HH: MM) | 0.0-23:59 dr hab |
| Hnub tim | 1 rau 31 |
| Lub hli | 1 rau 12 |
| Xyoo | 2000 rau 2099 |
| Cim ID naj npawb (Tsis quav ntsej) |
|
| Kev siv hluav taws xob | |
| Tsis muaj | Kev teeb tsa (Tus nqi Default) |
| Xauv Xauv | Tsis Yog (Default: Tsis yog) |
| Factory Default | Tsis Yog (Default: Tsis yog) |
| TAB 1 | ||
| Kev xaiv | Ntau yam (Min. to Max.) | Kev daws teeb meem & Chav |
| Hom J (Fe-K) | 0.0 txog + 960.0 ° C |
1 ° C or 0.1 ° C |
| Hom K (Cr-Al) | -200.0 txog +1376.0 ° C | |
| Hom T (Cu-Con) | -200.0 txog +387.0 ° C | |
| Hom R (Rh-13%) | 0.0 txog + 1771.0 ° C | |
| Hom S (Rh-10%) | 0.0 txog + 1768.0 ° C | |
| Hom B | 0.0 txog + 1826.0 ° C | |
| Hom N | 0.0 txog + 1314.0 ° C | |
| Tshwj xeeb rau cov neeg siv khoom tshwj xeeb Thermocouple yam tsis tau teev saum toj no. Hom yuav tsum tau teev nyob rau hauv raws li qhov kev txiav txim (optional on request) Thermocouple type. | ||
| RTD Pt100 | -199.9 txog +600.0 ° C | 1 ° C or 0.1 ° C |
| 0 rau 20 mA |
-30000 rau 30000 units |
1 0.1 0.01 0.001 units |
| 4 rau 20 mA | ||
| 0 rau 80 mV | ||
| Khaws tseg | ||
| 0 rau 1.25v |
-30000 rau 30000 units |
|
| 0 rau 5v | ||
| 0 rau 10v | ||
| 1 rau 5v | ||
| PEM HAUV TSEV KAWM NTAWV | ||
| Cim | Ntsiab | Muaj nuj nqi |
 |
Scroll | Nyem rau scroll los ntawm ntau yam txheej txheem Cov Ntaub Ntawv Cov Ntsiab Lus hauv Hom Kev Ua Haujlwm Zoo. |
 |
Tswb lees paub | Nias kom lees paub / kaw lub tswb tso zis (yog tias nquag siv) & rau view Alarm Status screen. |
 |
POM |
Nias kom txo tus nqi parameter. Nias ib zaug txo tus nqi los ntawm ib qho suav; khaws nias ceev kom hloov. |
 |
UP |
Nias kom nce tus nqi parameter. Nias ib zaug nce tus nqi los ntawm ib qho suav; khaws nias ceev kom hloov. |
 |
Teem-UP | Nias kom nkag los yog tawm ntawm kev teeb tsa hom. |
 |
ENTER | Nyob rau hauv Khiav hom, nias rau toggle ntawm Auto & Manual Scan hom. (Tsuas yog rau 16 Channel version)
Hauv Kev teeb tsa hom, nias kom khaws cov txheej txheem teeb tsa tus nqi thiab mus rau qhov txuas ntxiv mus. |
SCROLLING NTAWM VARIOUS SCREENS
Qhov screen qhia hauv qab no yog rau 4 Channel Version. Cov kab ke yog tib yam rau 8 & 16 Channel Version.
VIEWING ALARM STATUS SCREEN 
16 Channel Nrog Tswb Relay Outputs 
Kev sib txuas hluav taws xob
4 Channel Tsis muaj tswb Relay Outputs
4 Channel Nrog Tswb Relay Outputs 
8 Channel Tsis muaj tswb Relay Outputs 
8 Channel Nrog Tswb Relay Outputs
Cov ntaub ntawv / Cov ntaub ntawv
 |
PPI ScanLog Multi-Channel Data-Logger [ua pdf] Phau ntawv qhia ScanLog Multi-Channel Cov Ntaub Ntawv-Logger, Ntau-Channel Cov Ntaub Ntawv-Logger, Channel Cov Ntaub Ntawv-Logger, Cov Ntaub Ntawv-Logger, Logger |
