ScanLog Multi-Channel Data-Logger
Zambiri Zamalonda: ScanLog (PC) 4 / 8 / 16 Channel Recorder + PC Interface
- Jan 2022
- Operation Manual
- Zapangidwa kuti zizigwiritsidwa ntchito mwachangu pamalumikizidwe a mawaya ndikusaka kwa parameter
- Kuti mudziwe zambiri za momwe mungagwiritsire ntchito ndi kugwiritsa ntchito, pitani www.ppiindia.net
- Ili ku 101, Diamond Industrial Estate, Navghar, Vasai Road (E), Dist. Palghar - 401 210
- Zogulitsa: 8208199048 / 8208141446
- Thandizo: 07498799226 / 08767395333
- Imelo: sales@ppiindia.net, support@ppiindia.net
Malangizo Ogwiritsira Ntchito Zogulitsa:
Kuti mugwiritse ntchito ScanLog (PC) 4/8/16 Channel Recorder + PC Interface, tsatirani izi:
Ma Parameters Othandizira:
Khazikitsani chiyambi cha batch, kusanja nthawi yoyimitsa batch, ndi zokonda zowerengera zokha. Sankhani kuti muyambitse kapena ayi.
Zokonda pa Alamu
Sankhani tchanelo ndi mtundu wa alamu. Sankhani pakati pa "Palibe," "Process Low," kapena "Process High" pamtundu wa AL1. Khazikitsani AL1 setpoint ndi hysteresis. Sankhani ngati mulole AL1 inhibit kapena ayi. Zosankha zenizeni zomwe zilipo zimadalira manambala a ma alarm omwe amaikidwa pa tchanelo chilichonse patsamba la kasinthidwe ka Alamu.
Kukonzekera kwa Chipangizo:
Sankhani kufufuta kapena ayi. Khazikitsani ID yojambulira kuyambira 1 mpaka 127.
Kukonzekera kwa Channel:
Sankhani kugwiritsa ntchito kapena kusagwiritsa ntchito makonda onse a Chan Common. Sankhani tchanelo ndi mtundu wolowetsa. Onani Table 1 kuti mupeze zokonda zamtundu wa zolowetsa. Khazikitsani chizindikiro chochepa, chizindikiro chapamwamba, chotsika kwambiri, chokwera kwambiri, chodula chochepa, mtengo wotsika kwambiri, kudula kwambiri, kukwera mtengo, ndi zero offset.
Kusintha kwa Alamu:
Khazikitsani kuchuluka kwa ma alarm pa tchanelo chilichonse kuchokera pa 1 mpaka 4.
Kukonzekera kwa Chojambulira:
Khazikitsani nthawi yabwino kuyambira 0:00:00 (H:MM:SS) mpaka 2:30:00 (H:MM:SS). Sankhani kuti mutsegule nthawi yowonera kapena ayi, kusintha ma alarm, ndi kujambula. Sankhani pakati pa "Zopitilira" kapena "Batch" mode. Khazikitsani nthawi ya batch, ndikusankha kuti muyambitse kapena kuyimitsa batch.
Kusintha kwa RTC:
Khazikitsani nthawi (HH:MM), deti, mwezi, chaka, ndi nambala yapadera ya ID (osanyalanyaza).
Zothandizira:
Sankhani kukiya kapena kusatsegula chipangizocho.
ScanLog (PC)
4 / 8 / 16 Channel Recorder + PC Interface
Buku lachiduleli lapangidwa kuti liziwonetsa mwachangu kulumikiza mawaya ndikusaka kwa magawo. Kuti mudziwe zambiri za ntchito ndi kugwiritsa ntchito; chonde lowani ku www.ppiindia.net
| OPERATOR PARAMETERS | |
| Parameters | Zokonda |
| Kuyambira Gulu | Ayi Inde |
| Balance Slot Time | Werengani Pokha |
| Batch Stop | Ayi Inde |
| ZOCHITIKA PA ALARM | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Sankhani Channel | Mtundu wa PC
Kwa 4C: Channel-1 ku Njira-4 Kwa 8C: Channel-1 ku Njira-8 Kwa 16C: Channel-1 ku Njira-16 |
| Sankhani Alamu | AL1, AL2, AL3, AL4
(Zosankha zenizeni zimadalira manambala a Ma Alamu omwe akhazikitsidwa pa tchanelo chilichonse Tsamba lokonzekera ma alarm) |
| Mtengo wa AL1 | Palibe Njira Yotsika Kwambiri (Zofikira: Palibe) |
| Chithunzi cha AL1 | Min. ku Max. zamitundu yolowera yomwe yasankhidwa (Zofikira: 0) |
| AL1 Hysteresis | 1 mpaka 30000 (Zosasinthika : 20) |
| AL1 Kuletsa | Ayi Inde (Zofikira: Ayi) |
| KUSINTHA KWA Zipangizo | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Chotsani Records | Ayi Inde
(Kufikira: Ayi) |
| ID yojambulira | 1 mpaka 127
(Pofikira: 1) |
| KUKHALA KWA CHANEL | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Onse Chan Common | Ayi Inde (Kufikira: Ayi) |
| Sankhani Channel | Mtundu wa PC
Kwa 4C: Channel-1 ku Njira-4 Kwa 8C: Channel-1 ku Njira-8 Kwa 16C: Channel-1 ku Njira-16 |
Zikhazikiko: Zokonda (Kufikira Kwanthawi Zonse)
Mtundu Wolowera: Lozerani Gulu 1 (Kufikira : 0 mpaka 10 V)
Kusamvana: Refer Table 1
Signal Low
| Mtundu Wolowetsa | Zokonda | Zosasintha |
| 0 mpaka 20 mA | 0.00 mpaka Signal High | 0.00 |
| 4 mpaka 20 mA | 4.00 mpaka Signal High | 4.00 |
| 0 mpaka 80mv | 0.00 mpaka Signal High | 0.00 |
| 0 mpaka 1.25V | 0.000 mpaka Signal High | 0.000 |
| 0 mpaka 5V | 0.000 mpaka Signal High | 0.000 |
| 0 mpaka 10V | 0.00 mpaka Signal High | 0.00 |
| 1 mpaka 5V | 1.000 mpaka Signal High | 1.000 |
Signal High
| Mtundu Wolowetsa | Zokonda | Zosasintha |
| 0 mpaka 20 mA | Signal Yotsika mpaka 20.00 | 20.00 |
| 4 mpaka 20 mA | Signal Yotsika mpaka 20.00 | 20.00 |
| 0 mpaka 80mv | Signal Yotsika mpaka 80.00 | 80.00 |
| 0 mpaka 1.25V | Signal Yotsika mpaka 1.250 | 1.250 |
| 0 mpaka 5V | Signal Yotsika mpaka 5.000 | 5.000 |
| 0 mpaka 10V | Signal Yotsika mpaka 10.00 | 10.00 |
| 1 mpaka 5V | Signal Yotsika mpaka 5.000 | 5.000 |
Mitundu Yotsika: -30000 mpaka +30000 (Pofikira: 0)
Range High: -30000 mpaka +30000 (Pofikira: 1000)
Kutsika Pansi: Letsani Yambitsani (Kufikira : Zimitsani)
Otsika Clip Val: -30000 mpaka High Clip Val (Chofikira : 0)
Kudumpha Kwakukulu: Letsani Yambitsani (Kufikira : Zimitsani)
High Clip Val: Low Clip Val to 30000 (Mosasinthika : 1000)
Zero Offset: -30000 mpaka +30000 (Pofikira: 0)
| KUSINTHA KWA ALARM | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Alamu/Chan | 1 mpaka 4
(Pofikira: 4) |
| KUSINTHA KWA ZOCHITA | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Nthawi Yachibadwa | 0:00:00 (H:MM:SS) ku 2:30:00 (H:MM:SS) (Kufikira : 0:00:30) |
| Zoom Interval | 0:00:00 (H:MM:SS) ku 2:30:00 (H:MM:SS) (Kufikira : 0:00:10) |
| Alamu ya Toggl Rec | Thandizani Yambitsani (Kufikira : Yambitsani) |
| Kujambulira mumalowedwe | Gulu Lopitiriza (Zosasintha: Zopitilira) |
| Nthawi ya Batch | 0:01 (HH:MM) ku 250:00 (HHH:MM) (Pofikira: 1:00) |
| Batch Start Batch Stop | Ayi Inde |
| Kusintha kwa RTC | |
| Parameters | Zokonda |
| Nthawi (HH:MM) | 0.0 mpaka 23:59 |
| Tsiku | 1 mpaka 31 |
| Mwezi | 1 mpaka 12 |
| Chaka | 2000 mpaka 2099 |
| Nambala ya ID yapadera (Penyani) |
|
| ZOTHANDIZA | |
| Parameters | Zokonda (Kufikira Kwanthawi Zonse) |
| Tsegulani Tsegulani | Ayi Inde (Kufikira: Ayi) |
| Kufikira Kwa Fakitale | Ayi Inde (Kufikira: Ayi) |
| ZABWINO 1 | ||
| Njira | Range (Min. mpaka Max.) | Resolution & Unit |
| Mtundu J (Fe-K) | 0.0 mpaka +960.0°C |
1 °C or 0.1 °C |
| Mtundu K (Cr-Al) | -200.0 mpaka +1376.0 ° C | |
| Mtundu T (Cu-Con) | -200.0 mpaka +387.0 ° C | |
| Mtundu R (Rh-13%) | 0.0 mpaka +1771.0°C | |
| Mtundu S (Rh-10%) | 0.0 mpaka +1768.0°C | |
| Mtundu B | 0.0 mpaka +1826.0°C | |
| Mtundu N | 0.0 mpaka +1314.0°C | |
| Zosungidwa zamtundu wamakasitomala wa Thermocouple womwe sunatchulidwe pamwambapa. Mtunduwo udzafotokozedwa molingana ndi zomwe zalamulidwa (ngati mukufuna) mtundu wa Thermocouple. | ||
| Chithunzi cha RTD 100 | -199.9 mpaka +600.0 ° C | 1°C or 0.1 °C |
| 0 mpaka 20m |
-30000 mpaka 30000 mayunitsi |
1 0.1 0.01 0.001 mayunitsi |
| 4 mpaka 20m | ||
| 0 mpaka 80 mV | ||
| Zosungidwa | ||
| 0 mpaka 1.25 V |
-30000 mpaka 30000 mayunitsi |
|
| 0 mpaka 5 V | ||
| 0 mpaka 10 V | ||
| 1 mpaka 5 V | ||
| MAYIKO A PANEL | ||
| Chizindikiro | Chinsinsi | Ntchito |
 |
Mpukutu | Dinani kuti musunthe pamitundu yosiyanasiyana ya Information Information mu Normal Operation Mode. |
 |
Alamu Kuvomereza | Dinani kuti muvomereze / kutulutsa alamu (ngati ikugwira) & to view Chiwonetsero cha Alamu Status. |
 |
PASI |
Dinani kuti muchepetse mtengo wa parameter. Kupondereza kamodzi kumachepetsa mtengo ndi chiwerengero chimodzi; kusunga mbande kumawonjezera kusintha. |
 |
UP |
Dinani kuti muwonjezere mtengo wa parameter. Kupondereza kamodzi kumawonjezera mtengo ndi chiwerengero chimodzi; kusunga mbande kumawonjezera kusintha. |
 |
KHAZIKITSA | Dinani kuti mulowe kapena mutuluke muzokhazikitsira. |
 |
LOWANI | Mu Run Mode, dinani kuti musinthe pakati pa Auto & Manual Scan Mode. (Zokha za 16 Channel version)
Mu Set-up Mode, kanikizani kuti musunge mtengo wokhazikitsidwa ndikusunthira kugawo lina. |
KUPIRIRA M'MASKWERENSI WOSIYANA
Chophimba chomwe chili pansipa ndi cha 4 Channel Version. Zotsatira zake ndizofanana ndi 8 & 16 Channel Version.
VIEWING ALARM STATUS SCREEN 
16 Channel yokhala ndi Zotulutsa Alamu 
KULUMIKIZANA KWA NYAMA
4 Channel Popanda Zotulutsa Alamu
4 Channel yokhala ndi Zotulutsa Alamu 
8 Channel Popanda Zotulutsa Alamu 
8 Channel yokhala ndi Zotulutsa Alamu
Zolemba / Zothandizira
 |
PPI ScanLog Multi-Channel Data-Logger [pdf] Buku la Malangizo ScanLog Multi-Channel Data Logger, Multi-Channel Data Logger, Channel Data Logger, Data Logger, Logger |
