onsemi HPM10 Programming IsiKhokelo soMsebenzisi weSoftwe

Intshayelelo
Esi sikhokelo sibonelela ngolwazi malunga nendlela yokuseta i-HPM10 Programming Interface kwaye uyisebenzise ukucwangcisa i-HPM10 EVB yokutshaja ibhetri yokuncedisa ukuva. Nje ukuba umphuhlisi eqhelane nokusetyenziswa kwesixhobo kunye nendlela i-EVB esebenza ngayo, unokucombulula iiparamitha zokutshaja ngokulandela imiyalelo enikwe kwiReferensi yoMsebenzisi.

I-Hardware efunekayo

• HPM10−002−GEVK − HPM10 Evaluation and Development Kit okanye HPM10−002−GEVB − HPM10 Evaluation Board
• IWindows PC
• I2C uMcwangcisi
  I-Promira Serial Platform (IsiGaba esipheleleyo) + Ibhodi ye-Adapter & Intambo yoNxibelelwano (ifumaneka kwi-onsemi) okanye i-Adapter yoNxibelelwano lwe-Accelerator (CAA)

PHAWULA: I-Adapter ye-Accelerator yeNxibelelwano ifikelele ekupheleni koBomi (EOL) kwaye ayisakhuthazwa ukuba isetyenziswe. Nangona isaxhaswa, abaphuhlisi bayacetyiswa ukuba basebenzise umdwelisi wePromira I2C.

Ukhuphelo lweSoftware kunye noFakelo

1. Tshixa kwiakhawunti yakho yeMyON. Khuphela usetyenziso lwe-HPM10 Programming Interface kunye neReferensi yoMsebenzisi kwikhonkco: https://www.onsemi. com/PowerSolutions/myon/erFolder.do?folderId=8 07021. Vula uyilo loyilo file kwifolda esebenzayo efunwayo.
2. Kwi-akhawunti yakho ye-MyOn, khuphela i-SIGNAKLARA isixhobo esiluncedo kwikhonkco: https://www.onsemi.com/PowerSolutions/myon/er Folder.do?folderId=422041.
   Faka into esebenzisekayo. Usenokuba sele unalo olu ncedo olufakelweyo ukuba usebenze ngeemveliso ze-EZAIRO®.

Isixhobo seNkqubo kunye ne-EVB Setup
Qhagamshela iWindows PC, i-I2C programmer kunye ne-HPM10 EVB njengoko kubonisiwe kuyo Umfanekiso 1 ngezantsi:
Umzobo 1. Ukuseta uQhagamshelwano lwe-HPM10 yoVavanyo lwe-OTP kunye neNkqubo

1. Ikhomputha iqulethe i-HPM10 Programming Interface application, kunye ne-SIGNAKLARA Device Utility efakwe ngaphambili. I-software ye-HPM10 ye-Programming Interface ivumela umsebenzisi ukuba ahlole iiparitha zabo zentlawulo kwaye atshise izicwangciso ezigqityiweyo kwisixhobo.
   Isoftware ibonelela ngeendlela ezimbini zokucwangcisa, i-GUI kunye nesixhobo soMyalelo woMyalelo (CMD). Zombini iinketho kufuneka zenziwe kwi-Windows Prompt ukusuka kwifolda yesixhobo esihambelanayo ngokusebenzisa imiyalelo njengoko kuboniswe ngezantsi emva kokuqwalasela umdwelisi:
   • Ye-GUI -
     HPM10_OTP_GUI.exe [−−I2C umdwelisi wenkqubo] [−−Speed ​​SPEED] Example: HPM10_OTP_GUI.exe −−Promira −−speed 400
   • HPM10_OTP_GUI.exe −−CAA −−speed 100
   • NgesiXhobo soMyalelo woMyalelo − HPM10_OTP_GUI.exe [−−I2C umdwelisi] [−−speed SPEED] [−command option] Jonga iFigure 5 and 6 for examples.
2.  Vula i-CTK yomphathi woqwalaselo indlela emfutshane eyenziwe ngu SIGNAKLARA Usetyenziso lweSixhobo kwi-desktop. Cofa iqhosha elithi "Yongeza" kwaye usete uqwalaselo lojongano lwenkqubo ye-I2C ejoliswe ukunxibelelana ne-HPM10 Programming Interface njengoko kubonisiwe Umzobo 2.
   Umzobo 2. Ukucwangciswa kwe-CTK ye-CAA kunye ne-Promira I2C Adapters
   
   Zombini i-CAA kunye nePromira programmers zixhaswa yi-HPM10 Programming Interface. Qinisekisa ukuba umqhubi womdwelisi osetyenzisiweyo ufakiwe kwaye emva koko ucofe iqhosha elithi "Vavanya" ukuvavanya uqwalaselo. Ukuba ucwangciso luchanekile, ifestile ebonisa umyalezo "Ubumbeko lulungile" kufuneka ivele ibonise ukuba iadaptha iyasebenza. Qaphela umahluko kwisantya sedatha phakathi kwee-adapter ezimbini. I-Promira yi-adapter engagqibekanga esetyenziswa sisixhobo sokuyila se-HPM10 kwaye inokuxhasa izinga ledatha ye-400 kbps ngelixa i-adapter ye-CAA inokuxhasa ubuninzi be-100 kbps.
3. IBhodi yeTshaja ibonelela ngonikezelo voltage VDDP kwisixhobo se-HPM10 kwaye inxibelelana nesixhobo ukubonisa ubume bokutshaja. Ibhodi yeTjaja iluncedo ekuvavanyeni iparamitha zokutshaja. Le bhodi inokutshintshwa ngonikezelo lombane ukuba imeko yokutshaja ayifuni.
4. Isixhobo se-HPM10 kufuneka siqhagamshelwe njengoko kubonisiwe ku Umzobo 3
   Umzobo 3. I-HPM10 Ukuseta i-Hardware yoVavanyo lwe-OTP kunye nokutshisa
   
   kuphononongo lwepharamitha yentlawulo okanye ukutshisa i-OTP. Olu qhagamshelo kufuneka sele lusekwe kunye ne-jumpers kwi-HPM10 EVB entsha. Qaphela ukuba i-VHA iqhagamshelwe kwi-DVREG kwi-HPM10 EVB endaweni yomthombo wamandla wangaphandle obonisiweyo.

Iiparamitha ze-OTP
I-HPM10 PMIC ineebhanki ezimbini zobhaliso lwe-OTP:

• IBhanki ye-1 ye-OTP iqulethe zonke iirejistri zeeparamitha zentlawulo ezinokumiselwa ngumsebenzisi.
• IBhanki yesi-2 ye-OTP iqulathe zonke iisetingi zolungelelwaniso lwe-PMIC ngokwayo kunye nezinye iisetingi zepharamitha yentlawulo esisigxina. I-Bank 2 OTP icwangciswe ngexesha lovavanyo lokwenziwa kwe-PMIC kwaye akufuneki ibhalwe ngaphezulu. Isixhobo soNxibelelwano lweNkqubo ye-HPM10 sinemigangatho ethileampuqwalaselo lwe OTP files kwifolda yeNkxaso ukuze isetyenziswe ngobungakanani be-13 kunye nobukhulu obungama-312 obutshajwa kwakhona yi-AgZn kunye neebhetri ze-Li-ion. Ezi files zezi:
• I-s epheleleyoample files equlathe zonke izicwangciso ze OTP iparameters kuzo zombini OTP Bank 1 kunye Bank 2.ample files zezovavanyo kuphela kwaye kufuneka zingasetyenziselwa ukutshisa iirejista ze-OTP
• I-OTP1 sample files equlathe zonke iiparamitha zentlawulo ezilungiselelwayo ezibekwe kwiirejista ze-OTP zeBhanki. Iiparamitha zentlawulo kwezi files sele zizaliswe ngolungelelwaniso olusemgangathweni olucetyiswa ngabavelisi bebhetri.

Ngaphambi kokuba i-HPM10 isetyenziswe ukutshaja ibhetri, kufuneka ibenemilinganiselo yokutshaja enxulumene nobungakanani bebhetri, umthamo.tage kunye namanqanaba angoku atshiswe kwi-OTP1 yesixhobo.

Qala uVavanyo lokuTyala ibhetri
Eli candelo lichaza indlela yokuqalisa uvavanyo lokutshaja kwibhetri ye-S312 Li−ion ngokusebenzisa isixhobo soMlayini woMyalelo kunye neKiti yoVavanyo noPhuhliso. Kolu vavanyo, iiparamitha zentlawulo ziya kubhalwa kwi-RAM yokuvavanya inkqubo yokutshaja.

• Qhagamshela i-HPM10 EVB kunye netshaja njengoko kubonisiwe kuMfanekiso 1. Umfanekiso wolungiselelo olubonakalayo ubonisiwe Umzobo 4 ngezantsi:
  Umzobo 4. I-HPM10 Ukuseta i-Hardware yoVavanyo lokuTyala ibhetri
  
• Yiya kwifolda yeNkxaso yesixhobo seCMD. Khuphela i file “SV3_S312_Full_Sample.otp” kwaye uyigcine kwifolda yeSixhobo seCMD.
• Vula iwindow ye-Command Prompt kwiPC. Yiya kwiSixhobo soMyalelo woMyalelo esibekwe kwifolda yeCMD ye-HPM10 Programming Interface. Layisha zombini iiBhanki zeeparamitha ze-OTP eziqulethwe kwi file “SV3_S312_Full_Sample.otp” kwi-RAM yePMIC ngokusebenzisa lo myalelo ulandelayo:
  HPM10_OTP_GUI.exe [−−I2C umdwelisi wenkqubo] [−−Speed ​​SPEED] −w SV3_S312_Full_Sample.otp
   PHAWULA: Umdwelisi wenkqubo we-I2C ongagqibekanga nguPromira kwaye isantya ngama-400 (kbps). Ukuba ayichazwanga kumyalelo we-CMD, umdwelisi wenkqubo ongagqibekanga kunye nesantya siya kusetyenziswa yi-HPM10 Programming Interface.

Exampn 1: Bhala i-RAM usebenzisa umdwelisi wePromira:
Umzobo 5. Bhala i-RAM usebenzisa iPromira Programmer

Example 2: Bhala i-RAM usebenzisa umdwelisi wenkqubo we-CAA:
Umzobo 6. Bhala i-RAM usebenzisa i-CAA Programmer

• Ukuba ibhodi yetshaja isetyenzisiwe, vula iqhosha kwitshaja ukuze ukhethe "Indlela yoVavanyo", uze ucinezele iqhosha ukuze usebenzise i-5 V kwi-VDDP ye-HPM10 EVB.
• Landela imiyalelo eboniswe kwifestile ye-Command Prompt ukugqiba ukulayishwa kweeparamitha ze-OTP kwi-RAM kwaye uqalise uvavanyo lokutshaja.
• Emva kokuba uvavanyo lokutshaja luqalile, ibhodi yetshaja iya kubeka iliso kwaye ibonise isimo sokutshaja. Umntu unokujonga iiparamitha zokutshaja ngokucinezela iqhina kwakhona, emva koko uskrole kwimenyu ngokujikelezisa iqhina.
• Xa intlawulo iphelile, itshaja iya kubonisa ukuba ukutshaja kugqitywe ngempumelelo okanye kuphelile ngempazamo kunye nekhowudi yephutha.

Guqula iiParameters zokuTyala
Umzobo 7. Ukuphela Kwentlawulo yebhetri eyimpumelelo

Iiparamitha zentlawulo kwi-Bank 1 OTP inokuguqulwa ngokusebenzisa i-GUI ngolu hlobo lulandelayo:

• Vula iwindow ye-Command Prompt kwiPC. Lawula kwifolda apho i-GUI ikhoyo. Vula i-GUI ngokusebenzisa umyalelo njengoko kubonisiwe kwinqaku loku-1 leSixhobo seNkqubo kunye necandelo le-EVB lokuSeta ngasentla.
  Example: Vula i-GUI kunye nomdwelisi wePromira (jonga umfanekiso 8)
  Umzobo 8. Vula i-GUI ngePromira Programmer
  
  
• Cofa kwindawo ethi “Layisha file” iqhosha elikhoyo kwi GUI ukungenisa i file equlathe iiparamitha ze OTP. Qaphela ukuba i-GUI iphatha kuphela i-Bank 1 OTP iparameters. Ukuba i-OTP epheleleyo file ilayishiwe, kuphela izicwangciso zokuqala ezingama-35 eziya kuthathwa ngaphandle, kwaye amaxabiso ashiyekileyo aza kuhoywa.
•  Emva kokuguqula iiparamitha, bala amanani amatsha e-“OTP1_CRC1” kunye ne-“OTP1_CRC2” ngokucofa iqhosha elithi “Generate CRC”.
• Cofa kwindawo ethi “Gcina File” iqhosha ukugcina i-OTP1 egqityiweyo file.

Kucetyiswa ukuba uvavanye iiparamitha zentlawulo ehlaziyiweyo ngaphambi kokutshisa izicwangciso kwi-OTP. I-OTP epheleleyo file iyafuneka kule njongo. Ukuqulunqa i-OTP epheleleyo file, thatha ngokulula enye yee-OTP ezipheleleyoample files ukusuka kwifolda yeNkxaso kwaye ubeke endaweni yokuqala izicwangciso ezingama-35 ngamaxabiso avela kwi-OTP1 egqityiweyo file igcinwe ngaphezulu. Uvavanyo lwentlawulo kufuneka lwenziwe ngokusebenzisa iSixhobo soMyalelo woMyalelo njengoko i-GUI ayikwazi ukuphatha i-OTP epheleleyo file

Ukutshisa kunye nokufunda i-OTP Parameters
Zombini i-GUI kunye ne-Command Line Tool ingasetyenziselwa ukutshisa iirejista ze-OTP.

• Kwi-GUI, kuqala, layisha i-OTP1 egqityiweyo file njengoko kuveliswe ngasentla ngokusebenzisa i “Layisha file” umsebenzi kwisixhobo seGUI, emva koko sebenzisa "Zap OTP” umsebenzi ukuqalisa inkqubo yokutshisa.
• Kwisixhobo soMyalelo woMyalelo, faka lo myalelo ulandelayo kwi-Windows Prompt:
  HPM10_OTP_GUI.exe [-−I2C umdwelisi wenkqubo] [−−Speed ​​SPEED] −z otp1_fileigama.otp
• Landela imiyalelo evelelayo ukuseta ngokusisigxina amaxabiso eparamitha yentlawulo.
• Nje ukuba inkqubo igqityiwe, ibar yesimo ezantsi kwe GUI kufuneka ibonise "I-OTP izele ngempumelelo”. Kwisixhobo somgca womyalelo, inkqubo kufuneka iphele ngomyalezo "I-OTP ivaliwe umyalelo uthunyelwe” iboniswe ngaphandle kwempazamo.

Emva kokutshisa i-OTP, i “Funda i-OTP” umsebenzi kwi-GUI unokusetyenziselwa ukufunda umva umxholo ukuqinisekisa inkqubo yokutshisa okanye usebenzise lo myalelo ulandelayo kwi-Windows Prompt yeSixhobo soMyalelo woMyalelo:
HPM10_OTP_GUI.exe [−−I2C umdwelisi wenkqubo] [−−Speed ​​SPEED] −r ngaphandle_fileigama.otp

Amanqaku abalulekileyo

• Seta kwakhona i-PMIC ngokubamba iphedi ye-CCIF PHANTSI ngelixa unika amandla i-VDDP ngexesha lenkqubo yokufunda i-OTP. Ngaphandle koko, idatha efunyenweyo iya kuba ayichanekanga.
  
• Ngaphambi kokuba uqale ukuhlawula ibhetri kwimodi yokuncedisa ukuva, susa uqhagamshelwano phakathi kweVHA kunye neVDDIO okanye unikezelo lwamandla lwangaphandle kwi-VHA, kwaye uphinde udibanise i-ATST-EN emhlabeni ukuze ungene kwimodi yokuncedisa ukuva.

Amaxwebhu / Izibonelelo

onsemi HPM10 Programming Interface Software [pdf] Isikhokelo somsebenzisi HPM10 Programming Interface Software, Programming Interface Software, Software Interface, Software

Iimbekiselo

• Incwadi yokusebenzisa