onsemi HPM10 Programming Interface ntuziaka onye ọrụ

Okwu mmalite
Ntuziaka a na-enye ozi maka ịtọlite ​​​​HPM10 Programming Interface ma jiri ya hazie HPM10 EVB maka ịchaji batrị enyemaka ntị. Ozugbo onye nrụpụta maara nke ọma maka iji ngwá ọrụ ahụ na ka EVB si arụ ọrụ, ọ nwere ike mezie-mgbanwe ihe nkwụnye ụgwọ site n'ịgbaso ntuziaka enyere na Ntuziaka Onye ọrụ.

Ngwaike achọrọ

• HPM10-002-GEVK - HPM10 Evaluation and Development Kit ma ọ bụ HPM10-002-GEVB - HPM10 Evaluation Board
• Windows PC
• Onye mmemme I2C
  Platform Promira Serial Platform (Ngụkọta Usoro) + Ihe nkwụnye nkwụnye na USB Interface (nke dị na onsemi) ma ọ bụ Nkwukọrịta Accelerator Adapter (CAA)

IHE: Ihe Nkwukọrịta Accelerator Adapter eruola Ọgwụgwụ nke Ndụ ya (EOL) na anaghị akwado ya maka ojiji. Ọ bụ ezie na a ka na-akwado ya, a na-adụ ndị mmepe ọdụ ka ha jiri Promira I2C mmemme.

Nbudata na ntinye ngwanrọ

1. Kpọchie na akaụntụ MyON gị. Budata ngwa HPM10 Programming Interface yana nrụtụ aka onye ọrụ site na njikọ ahụ: https://www.onsemi. com/PowerSolutions/myon/erFolder.do?folderId=8 07021. Mepee ya imewe file gaa na folda ọrụ achọrọ.
2. Na akaụntụ MyOn gị, budata Utility Device SIGNAKLARA site na njikọ ahụ: https://www.onsemi.com/PowerSolutions/myon/er Folder.do?folderId=422041.
   Wụnye akụrụngwa arụ ọrụ. Ị nwere ike tinyelarị akụrụngwa a ma ọ bụrụ na i jirila ngwaahịa EZAIRO® rụọ ọrụ.

Ngwá Ọrụ Mmemme na Ntọala EVB
Jikọọ Windows PC, I2C programmer na HPM10 EVB dị ka egosiri na Foto 1 dị n'okpuru:
Ọgụgụ 1. Nhazi njikọ maka HPM10 OTP Nnwale na mmemme

1. Kọmputa ahụ nwere ngwa Interface Programming HPM10, yana ngwa ngwaọrụ SIGNAKLARA arụnyere na mbụ. Ngwanrọ Interface Programming HPM10 na-enye onye ọrụ ohere inyocha paramita ụgwọ ha wee gbaa ntọala emechara ọkụ na ngwaọrụ ahụ.
   Akụrụngwa na-enye nhọrọ mmemme abụọ, GUI na Ngwá Ọrụ Command Line (CMD). A ga-emerịrị nhọrọ abụọ a na Windows ozugbo site na nchekwa ngwaọrụ ha kwekọrọ site na iji iwu dị ka egosiri n'okpuru mgbe ha haziela onye mmemme:
   • Maka GUI -
     HPM10_OTP_GUI.exe [--I2C programmer] [--speed SPEED] Ex.ample: HPM10_OTP_GUI.exe --Promira --ọsọ 400
   • HPM10_OTP_GUI.exe --CAA --ọsọ 100
   • Maka Ngwá Ọrụ Ahịrị Iwu - HPM10_OTP_GUI.exe [--I2C programmer] [--Speed ​​SPEED] [-nhọrọ iwu] Lee eserese 5 na 6 maka ex.amples.
2.  Mepee ụzọ mkpirisi nhazi nhazi CTK nke SIGNAKLARA Device Utility mepụtara na desktọpụ. Pịa bọtịnụ “Tinye” wee tọọ nhazi interface maka onye mmemme I2C ezubere maka imekọrịta na Interface Mmemme HPM10 dị ka egosiri na Onyonyo 2.
   Ọgụgụ 2. Nhazi CTK nke CAA na Promira I2C Adapters
   
   Ma CAA na Promira mmemme bụ nke HPM10 Programming Interface kwadoro. Gbaa mbọ hụ na etinyere ọkwọ ụgbọ ala maka mmemme eji wee pịa bọtịnụ “Nnwale” iji nwalee nhazi ahụ. Ọ bụrụ na nhazi ahụ ziri ezi, windo na-egosipụta ozi "Nhazi dị mma" kwesịrị ịpụta na-egosi na ihe nkwụnye ahụ na-arụ ọrụ. Rịba ama ọdịiche dị na ntọala ọsọ data dị n'etiti nkwụnye abụọ ahụ. Promira bụ ndabara ndabara nke HPM10 imewe ngwá ọrụ na-eji na ike na-akwado a data ọnụego nke 400 kbps mgbe CAA nkwụnye nwere ike na-akwado kacha nke 100 kbps.
3. Ụlọ chaja na-enye ihe na-enye voltage VDDP na ngwaọrụ HPM10 ma na-ekwurịta okwu na ngwaọrụ iji gosipụta ọkwa nchaji. Igwe chaja bara uru maka inyocha ihe nchacha chaja. Enwere ike dochie bọọdụ a site na ọkọnọ ike ma ọ bụrụ na achọrọghị ọkwa nchaji.
4. Ekwesịrị ijikọ ngwaọrụ HPM10 dịka egosiri na Onyonyo 3
   Ọgụgụ 3. Ntọlite ​​ngwaike HPM10 maka Ntụle OTP na Ọkụ
   
   maka nlebanya oke ụgwọ ma ọ bụ ọkụ OTP. Ekwesịrị ịtọlitelarị njikọ a na ndị jumpers na HPM10 EVB ọhụrụ. Mara na ejikọrọ VHA na DVREG na HPM10 EVB kama isi iyi ike mpụga egosiri.

Oke OTP
HPM10 PMIC nwere ụlọ akụ abụọ nke ndekọ ndekọ OTP:

• Ụlọ akụ 1 OTP nwere ndekọ niile maka ụgwọ ụgwọ nke onye ọrụ nwere ike ịtọ.
• Ụlọ akụ 2 OTP nwere ntọala nhazi niile maka PMIC n'onwe ya gbakwunyere ụfọdụ ntọala nkwụnye ụgwọ. A na-ahazi ụlọ akụ 2 OTP n'oge a na-anwale ule PMIC na e kwesịghị idegharị ya. Ngwa HPM10 Programming Interface nwere ụfọdụ ọkọlọtọ sampna OTP nhazi files na nchekwa nkwado maka ojiji nwere nha 13 na nha 312 nke agZn na batrị Li-ion nwere ike chaji. Ndị a files bụ:
• Ihe juru sample files nke nwere ntọala niile maka paramita OTP na ma OTP Bank 1 na Bank 2. Ndị a zuru oke.ample files bụ naanị maka nlebanya ule na e kwesịghị iji gbaa akwụkwọ ndekọ OTP ọkụ
• OTP1 sample files nke nwere ihe niile configurable ụgwọ parameters dị na Bank 1 OTP ndekọ. Paramita ụgwọ dị na ndị a fileejularị s site na ntọala ọkọlọtọ nke ndị nrụpụta batrị tụrụ aro.

Tupu enwee ike iji HPM10 chajị batrị, ọ ga-enwerịrị parampat chaja metụtara nha batrị, voltage na ọkwa dị ugbu a gbara ọkụ n'ime OTP1 nke ngwaọrụ ahụ.

Malite ule chaja batrị
Akụkụ a na-akọwa otu esi amalite ule nchaji na batrị S312 Li-ion site na iji ngwa Line Command na ngwa nyocha na mmepe. Maka ule a, a ga-ederịrị paramita ụgwọ na RAM maka nyocha nke usoro nchaji.

• Jikọọ HPM10 EVB na chaja dị ka egosiri na foto 1. A na-egosi foto nhazi anụ ahụ na Ọgụgụ 4 n'okpuru:
  Ọgụgụ 4. Ntọlite ​​ngwaike HPM10 maka ule chaja batrị
  
• Gaa na nchekwa nkwado nke ngwa CMD. Detuo ya file "SV3_S312_Full_Sample.otp" ma chekwaa ya na nchekwa Ngwa CMD.
• Mepee windo Command ozugbo na PC. Gaa na Ngwa Line Command dị na nchekwa CMD nke Interface Programming HPM10. Bujuo ụlọ akụ abụọ nke paramita OTP dị n'ime file "SV3_S312_Full_Sample.otp" n'ime RAM nke thePMIC site na iji iwu a:
  HPM10_OTP_GUI.exe [--I2C programmer] [--Speed ​​SPEED] -w SV3_S312_Full_Sample.otp
   IHE: Onye mmemme I2C ndabara bụ Promira na ọsọ bụ 400 (kbps). Ọ bụrụ na akọwaghị ya na iwu CMD, ihe mmemme na ọsọ ga-eji HPM10 Programming Interface.

Exampnke 1: Jiri Promira programmer dee RAM:
Ọgụgụ 5. Jiri Promira Programmer dee RAM

Example 2: Dee RAM site na iji mmemme CAA:
Ọgụgụ 6. Jiri CAA Programmer dee RAM

• Ọ bụrụ na ejiri bọọdụ chaja, gbanye eriri na chaja ka ịhọrọ nhọrọ “Ule ule” wee pịa eriri ka itinye 5 V na VDDP nke HPM10 EVB.
• Soro ntuziaka egosiri na windo Command Prompt ka mezue nbudata nke paramita OTP na RAM wee malite ule chaja.
• Ozugbo ule nchaji malitere, bọọdụ chaja ga-enyocha ma gosipụta ọkwa nchaji. Mmadụ nwere ike ịlele paramita nchaji site na ịpị eriri ọzọ, wee pịgharịa na menu site n'ịtụgharị eriri.
• Mgbe ụgwọ ahụ kwụsịrị, chaja ga-egosipụta ma ọ bụrụ na emechara chaja nke ọma ma ọ bụ mechie ya na koodu njehie.

Gbanwee Parameter Charge
Onyonyo 7. Ọgwụgwụ nke chaja batrị na-aga nke ọma

Enwere ike gbanwee paramita ụgwọ dị na Bank 1 OTP site na iji GUI dị ka ndị a:

• Mepee windo Command ozugbo na PC. Gaa na folda ebe GUI dị. Mepee GUI site na iji iwu dị ka egosiri na ihe 1 nke Ngwa Mmemme na ngalaba EVB Setup n'elu.
  ExampLe: Mepee GUI na Promira programmer (lee foto 8)
  Onyonyo 8. Mepee GUI na Promira Programmer
  
  
• Pịa “Ibu Ibu file"bọtịnụ dị na GUI iji bubata file nwere paramita OTP. Mara na GUI na-ejikwa paramita Bank 1 OTP naanị. Ọ bụrụ na OTP zuru ezu file na-kwajuru, naanị ntọala 35 mbụ ka a ga-ebubata, a ga-eleghara ụkpụrụ ndị fọdụrụ anya.
•  Mgbe emezigharịa paramita ahụ, gbakọọ ụkpụrụ ọhụrụ maka "OTP1_CRC1" na "OTP1_CRC2" site na ịpị bọtịnụ "Mepụta CRC".
• Pịa na "Save File” bọtịnụ iji chekwaa OTP1 emechara file.

A na-atụ aro ka ịnwale parampat ụgwọ emelitere tupu ịgbanye ntọala n'ime OTP. OTP zuru ezu file achọrọ maka nke a. Iji dee OTP zuru ezu file, naanị were otu n'ime s OTP zuru ezuample files site na nchekwa nkwado wee dochie ntọala 35 mbụ na ụkpụrụ sitere na OTP1 emechara file echekwara n'elu. Ekwesịrị iji ngwa Line Command mee ule ụgwọ n'ihi na GUI enweghị ike ijikwa OTP zuru oke file

Na-ere ọkụ ma na-agụ Paramita OTP
Enwere ike iji ma GUI na ngwa Line Command wee gbaa ndekọ OTP ọkụ.

• Maka GUI, buru ụzọ buo OTP1 emechara file dị ka emepụtara n'elu site na iji " Ibu file” rụọ ọrụ na ngwa GUI, wee jiri "Pịa OTP"ọrụ iji malite usoro ọkụ.
• Maka Ngwá Ọrụ Line Command, tinye iwu a na Windows ozugbo:
  HPM10_OTP_GUI.exe [--I2C programmer] [--speed SPEED] -z otp1_fileaha.otp
• Soro ntuziaka mmapụta ka ịtọọ ụkpụrụ oke ụgwọ kpamkpam.
• Ozugbo usoro ahụ mechara, ogwe ọkwa dị na ala GUI kwesịrị igosipụta "OTP meriri nke ọma." Maka Ngwá Ọrụ Line Command, usoro ahụ kwesịrị ịkwụsị na ozi ahụ "OTP kwụsịrị ezigara iwu" egosiri na-enweghị njehie ọ bụla.

Mgbe ọkụ OTP gasịrị, a "Gụọ OTP" Enwere ike iji ọrụ na GUI gụọ azụ ọdịnaya iji nyochaa usoro ọkụ ma ọ bụ jiri iwu na-esonụ na Windows ozugbo maka Ngwá Ọrụ Line Command:
HPM10_OTP_GUI.exe [--I2C programmer] [--speed SPEED] -r out_fileaha.otp

Ihe ndetu dị mkpa

• Tọgharia PMIC site na ijide pad CCIF LOW ka ị na-eme ka VDDP dị elu n'oge usoro ọgụgụ OTP. Ma ọ bụghị ya, data ewepụtara agaghị ezighi ezi.
  
• Tupu ịmalite ịchaji batrị na ọnọdụ enyemaka anụ ihe, wepụ njikọ dị n'etiti VHA na VDDIO ma ọ bụ ọkụ dị n'èzí na VHA, ma jikọọ ATST-EN n'ala iji banye ọnọdụ enyemaka ntị.

Akwụkwọ / akụrụngwa

onsemi HPM10 Programming Interface Software [pdf] Ntuziaka onye ọrụ HPM10 Programming Interface Software, Programming Interface Software, Interface Software, Software

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ