onsemi HPM10 Programming Interface Software Cov neeg siv phau ntawv

Taw qhia
Cov lus qhia no muab cov ntaub ntawv qhia txog yuav ua li cas teeb tsa HPM10 Programming Interface thiab siv nws los ua haujlwm rau HPM10 EVB rau them lub roj teeb pob ntseg. Thaum tus tsim tawm paub txog kev siv lub cuab yeej thiab yuav ua li cas EVB ua haujlwm, nws tuaj yeem kho qhov kev them nyiaj tsis zoo los ntawm kev ua raws li cov lus qhia hauv Cov Neeg Siv Khoom Siv.

Yuav tsum tau Hardware

• HPM10−002-GEVK − HPM10 Evaluation and Development Kit or HPM10−002-GEVB − HPM10 Evaluation Board
• Windows PC
• I2C Programmer
  Promira Serial Platform (Tag Nrho Theem) + Adapter Board & Interface Cable (muaj los ntawm onsemi) lossis Kev Sib Txuas Lus Accelerator Adapter (CAA)

CEEB TOOM: Kev Sib Txuas Lus Accelerator Adapter tau mus txog qhov kawg ntawm Lub Neej (EOL) thiab tsis pom zoo siv lawm. Txawm hais tias nws tseem muaj kev txhawb nqa, cov neeg tsim khoom raug qhia kom siv Promira I2C programmer.

Software Downloads thiab Installation

1. Xauv rau koj tus account MyON. Rub tawm HPM10 Programming Interface daim ntawv thov thiab Cov Neeg Siv Siv los ntawm qhov txuas: https://www.onsemi. com/PowerSolutions/myon/erFolder.do?folderId=8 07021. Unzip tus tsim file mus rau qhov xav tau ua haujlwm folder.
2. Hauv koj tus account MyOn, rub tawm SIGNAKLARA Device Utility los ntawm qhov txuas: https://www.onsemi.com/PowerSolutions/myon/er Folder.do?folderId=422041.
   Nruab lub executable utility. Tej zaum koj twb muaj cov khoom siv hluav taws xob no yog tias koj tau ua haujlwm nrog EZAIRO® cov khoom.

Programming Tool thiab EVB Teeb
Txuas lub Windows PC, I2C programmer thiab HPM10 EVB raws li qhia hauv Daim duab 1 hauv qab no:
Daim duab 1. Kev Sib Txuas Teeb rau HPM10 OTP Kev Ntsuas thiab Kev Ua Haujlwm

1. Lub khoos phis tawj muaj daim ntawv thov HPM10 Programming Interface, thiab SIGNAKLARA Device Utility tau teeb tsa ua ntej. Lub HPM10 Programming Interface software tso cai rau tus neeg siv los ntsuas lawv cov nqi tsis tau thiab hlawv cov teeb tsa tiav rau lub cuab yeej.
   Lub software muab ob txoj kev xaiv programming, GUI thiab Command Line Tool (CMD). Ob qho kev xaiv yuav tsum tau ua tiav hauv Windows Prompt los ntawm lawv cov cuab yeej sib txuas los ntawm kev siv cov lus txib raws li qhia hauv qab no tom qab teeb tsa tus programmer:
   • Rau GUI-
     HPM10_OTP_GUI.exe [−−I2C programmer] [−-speed SPEED] Example: HPM10_OTP_GUI.exe −-Promira −-speed 400
   • HPM10_OTP_GUI.exe −−CAA −-speed 100
   • Rau Command Line Tool − HPM10_OTP_GUI.exe [−−I2C programmer] [−−speed SPEED] [−command option] Saib Figures 5 and 6 for examples.
2.  Qhib CTK configuration manager shortcut tsim los ntawm SIGNAKLARA Device Utility ntawm lub desktop. Nyem qhov "Ntxiv" khawm thiab teeb tsa lub interface teeb tsa rau I2C programmer npaj rau kev sib txuas lus nrog HPM10 Programming Interface raws li qhia hauv Daim duab 2.
   Daim duab 2. CTK Configuration ntawm CAA thiab Promira I2C Adapters
   
   Ob lub CAA thiab Promira programmers tau txais kev txhawb nqa los ntawm HPM10 Programming Interface. Xyuas kom tus tsav tsheb rau cov programmer siv tau raug teeb tsa thiab tom qab ntawd nyem lub pob "Test" txhawm rau ntsuas qhov teeb tsa. Yog tias qhov teeb tsa yog lawm, lub qhov rai uas qhia cov lus "Configuration is okay" yuav tsum pop up qhia tias lub adaptor ua haujlwm. Nco ntsoov qhov sib txawv ntawm cov ntaub ntawv ceev teeb tsa ntawm ob lub adaptors. Promira yog lub neej ntawd adapter siv los ntawm HPM10 cov cuab yeej tsim thiab tuaj yeem txhawb cov ntaub ntawv tus nqi ntawm 400 kbps thaum lub CAA adapter tuaj yeem txhawb qhov siab tshaj plaws ntawm 100 kbps.
3. Lub Charger Board muab cov khoom voltage VDDP rau HPM10 ntaus ntawv thiab sib txuas lus nrog lub cuab yeej los tso saib cov xwm txheej them. Lub Charger Board muaj txiaj ntsig zoo rau kev ntsuas qhov ntsuas qhov ntsuas. Lub rooj tsavxwm no tuaj yeem hloov tau los ntawm cov khoom siv hluav taws xob yog tias tsis xav tau qhov kev them nyiaj.
4. Cov cuab yeej HPM10 yuav tsum txuas nrog raws li qhia hauv Daim duab 3
   Daim duab 3. HPM10 Hardware Teeb rau OTP Kev Ntsuas thiab Hlawv
   
   rau tus nqi ntsuas ntsuas lossis OTP hlawv. Qhov kev sib txuas no yuav tsum tau teeb tsa nrog cov jumpers ntawm HPM10 EVB tshiab. Nco ntsoov tias VHA txuas nrog DVREG ntawm HPM10 EVB es tsis txhob siv hluav taws xob sab nraud pom.

OTP Parameters
HPM10 PMIC muaj ob lub tsev txhab nyiaj ntawm OTP npe:

• Lub txhab nyiaj 1 OTP muaj tag nrho cov ntawv sau npe rau cov nqi tsis tau teev tseg los ntawm tus neeg siv.
• Lub txhab nyiaj 2 OTP muaj tag nrho cov kev ntsuas ntsuas rau PMIC nws tus kheej ntxiv rau qee qhov kev teeb tsa tus nqi tas. Lub txhab nyiaj 2 OTP yog programmed thaum lub sij hawm tsim khoom kuaj ntawm PMIC thiab yuav tsum tsis txhob overwritten. Cov cuab yeej HPM10 Programming Interface muaj qee tus qauv samplos ntawm OTP configuration files nyob rau hauv cov ntaub ntawv txhawb nqa siv nrog loj 13 thiab loj 312 rechargeable AgZn thiab Li-ion roj teeb. Cov no files yog:
• Qhov puv sample files uas muaj tag nrho cov chaw rau OTP tsis nyob rau hauv ob qho tib si OTP Bank 1 thiab Bank 2. Cov tag nrho sample files yog rau kev ntsuam xyuas nkaus xwb thiab yuav tsum tsis txhob siv los hlawv OTP cov ntawv sau npe
• OTP 1 sample files uas muaj tag nrho cov kev teeb tsa tus nqi tsis muaj nyob hauv lub txhab nyiaj 1 OTP cov npe. Tus nqi parameter hauv cov no files twb populated nrog cov txheej txheem chaw pom zoo los ntawm lub roj teeb manufacturers.

Ua ntej HPM10 tuaj yeem siv los them lub roj teeb, nws yuav tsum muaj cov nqi tsis cuam tshuam txog lub roj teeb loj, vol.tage thiab theem tam sim no hlawv rau hauv OTP1 ntawm lub cuab yeej.

Pib qhov Kev Ntsuas Roj Teeb
Tshooj lus no piav qhia txog yuav pib qhov kev xeem them nqi li cas ntawm S312 Li-ion roj teeb los ntawm kev siv cov cuab yeej Command Line thiab Kev Ntsuas thiab Kev Txhim Kho Cov Khoom Siv. Rau qhov kev xeem no, tus nqi ntsuas yuav raug sau rau RAM rau kev ntsuam xyuas ntawm cov txheej txheem them nyiaj.

• Txuas lub HPM10 EVB thiab lub charger raws li qhia hauv daim duab 1. Daim duab ntawm lub cev teeb tsa tau pom hauv Daim duab 4 hauv qab no:
  Daim duab 4. HPM10 Kho vajtse teeb rau roj teeb Charge Test
  
• Coj mus rau qhov chaw txhawb nqa ntawm CMD cov cuab yeej. Luam the file “SV3_S312_Full_Sample.otp"thiab txuag nws hauv CMD Tool nplaub tshev.
• Qhib Command Prompt qhov rai ntawm lub PC. Nkag mus rau Command Line Tool nyob hauv CMD folder ntawm HPM10 Programming Interface. Load ob lub txhab nyiaj ntawm OTP tsis muaj nyob hauv file “SV3_S312_Full_Sample.otp" rau hauv RAM ntawm PMIC los ntawm kev siv cov lus txib hauv qab no:
  HPM10_OTP_GUI.exe [−−I2C programmer] [−−speed SPEED] −w SV3_S312_Full_Sample.otp
   Nco tseg: Lub neej ntawd I2C programmer yog Promira thiab qhov ceev yog 400 (kbps). Yog tias tsis tau txhais hauv CMD cov lus txib, lub neej ntawd programmer thiab ceev yuav raug siv los ntawm HPM10 Programming Interface.

Exampnqe 1: Sau RAM siv Promira programmer:
Daim duab 5. Sau RAM siv Promira Programmer

Examplwm 2: Sau RAM siv CAA programmer:
Daim duab 6. Sau RAM Siv CAA Programmer

• Yog hais tias lub charger board siv, tig lub pob caus ntawm lub charger los xaiv "Test Mode", ces nias lub pob khawm siv 5 V rau VDDP ntawm HPM10 EVB.
• Ua raws li cov lus qhia uas muaj nyob rau hauv Command Prompt qhov rais kom tiav qhov chaw thau khoom ntawm OTP tsis rau RAM thiab pib qhov kev xeem them.
• Thaum qhov kev ntsuam xyuas tau pib lawm, lub charger board yuav saib xyuas thiab tso saib cov xwm txheej them. Ib tus tuaj yeem tshawb xyuas qhov tsis them nyiaj los ntawm nias lub pob dua, tom qab ntawd scroll los ntawm cov ntawv qhia zaub mov los ntawm tig lub pob.
• Thaum cov nqi them tas lawm, lub charger yuav tso tawm yog tias qhov kev them nyiaj tau ua tiav tiav lossis xaus nrog kev ua txhaum nrog rau qhov yuam kev.

Hloov Cov Nqi Them Nqi
Daim duab 7. Xaus ntawm Kev Ua Tau Zoo Roj Teeb

Tus nqi tsis nyob hauv Bank 1 OTP tuaj yeem hloov kho los ntawm kev siv GUI raws li hauv qab no:

• Qhib Command Prompt qhov rai ntawm lub PC. Nkag mus rau hauv daim nplaub tshev uas GUI nyob. Qhib GUI los ntawm kev siv cov lus txib raws li qhia hauv nqe lus 1 ntawm Programming Tool thiab EVB Setup seem saum toj no.
  Example: Qhib GUI nrog Promira programmer (saib daim duab 8)
  Daim duab 8. Qhib GUI nrog Promira Programmer
  
  
• Nyem qhov "Load file” khawm muaj nyob rau ntawm GUI kom import cov file muaj cov kev txwv OTP. Nco ntsoov tias GUI tsuas yog tswj hwm lub txhab nyiaj 1 OTP tsis txwv. Yog tias muaj OTP tag nrho file yog loaded, tsuas yog thawj 35 qhov chaw yuav raug imported, thiab cov nqi ntxiv yuav raug ignored.
•  Tom qab hloov kho qhov tsis muaj, suav cov nqi tshiab rau "OTP1_CRC1" thiab "OTP1_CRC2" los ntawm nias rau ntawm "Tsim CRC" khawm.
• Nyem rau ntawm "Save File” khawm kom txuag tau qhov kawg OTP1 file.

Nws raug nquahu kom kuaj cov nqi hloov tshiab ua ntej hlawv cov chaw rau hauv OTP. Tag nrho OTP file yog yuav tsum tau rau lub hom phiaj no. Txhawm rau sau tag nrho OTP file, tsuas yog nqa ib qho ntawm OTP tag nrhoample files los ntawm cov ntawv txhawb nqa thiab hloov thawj 35 qhov chaw nrog cov txiaj ntsig los ntawm qhov kawg OTP1 file cawm saum toj no. Kev ntsuas tus nqi yuav tsum tau ua tiav siv Command Line Tool raws li GUI tsis tuaj yeem tuav OTP tag nrho file

Hlawv thiab nyeem OTP Parameters
GUI thiab Command Line Tool tuaj yeem siv los hlawv OTP cov npe.

• Rau GUI, ua ntej, thauj khoom kawg OTP1 file raws li generated saum toj no los ntawm kev siv lub “Load file” ua haujlwm hauv GUI cov cuab yeej, tom qab ntawd siv "Sib OTP” muaj nuj nqi los pib cov txheej txheem hlawv.
• Rau Command Line Tool, nkag mus rau cov lus txib hauv qab no hauv Windows Prompt:
  HPM10_OTP_GUI.exe [−−I2C programmer] [−−speed SPEED] −z otp1_filenpe otp
• Ua raws li cov lus qhia popup txhawm rau teeb tsa tus nqi ntsuas tus nqi mus tas li.
• Thaum cov txheej txheem tiav lawm, cov xwm txheej bar nyob hauv qab ntawm GUI yuav tsum tso "OTP zapped tiav." Rau cov cuab yeej hais kom ua kab, cov txheej txheem yuav tsum xaus nrog cov lus “OTP zap txib xa" qhia tsis muaj qhov yuam kev.

Tom qab OTP hlawv, lub “Read OTP” muaj nuj nqi ntawm GUI tuaj yeem siv los nyeem rov qab cov ntsiab lus los txheeb xyuas cov txheej txheem hlawv lossis siv cov lus txib hauv qab no hauv Windows Prompt rau Command Line Tool:
HPM10_OTP_GUI.exe [−−I2C programmer] [−-speed SPEED] −r out_filenpe otp

Cov Lus Cim Tseem Ceeb

• Rov pib PMIC los ntawm kev tuav CCIF ncoo LOW thaum lub zog VDDP thaum lub sijhawm nyeem OTP. Txwv tsis pub, cov ntaub ntawv retrieve yuav tsis raug.
  
• Ua ntej pib them lub roj teeb hauv hom kev pab hnov ​​lus, tshem tawm qhov kev sib txuas ntawm VHA thiab VDDIO lossis lub zog hluav taws xob sab nraud rau VHA, thiab tseem txuas ATST-EN rau hauv av kom nkag mus rau hom kev pab hnov ​​lus.

Cov ntaub ntawv / Cov ntaub ntawv

onsemi HPM10 Programming Interface Software [ua pdf] Cov neeg siv phau ntawv qhia HPM10 Programming Interface Software, Programming Interface Software, Interface Software, Software

Cov ntaub ntawv

• Cov neeg siv phau ntawv