Imixholo
fihla
iSMACONTROLLI SFAR-1M-2DI1AO 2 iiNgeniso zeDijithali kunye ne-1 ye-Analog Output Modbus IO Module
| INGCACISO | ||
| Ukunikezwa Amandla | Umqulutage | 10-38 V DC; 10-28 V AC |
| Ukutya umbane | 2 W @ 24 V DC; 4 VA @ 24 V AC | |
|
Iziphumo zeAnalog |
1x Voltagimveliso | 0 V÷10 V (isisombululo 1,5 mV) |
| 1x Imveliso yangoku | 0 mA÷20 mA (isigqibo 5 uA) | |
| 4 mA÷20 mA (isigqibo 16 uA) | ||
| Amagalelo edijithali | I-2x, ingqiqo "0": 0-3 V, ingqiqo "1": 6-38 V | |
| Izixhobo zokubala | 2x, Isisombululo 32-bits Frequency max 1 kHz | |
| izinga lobubi | Ukusuka kwi-2400 ukuya kwi-115200 bps | |
| Ukhuseleko lokungena | IP40 – yofakelo lwangaphakathi | |
| Ubushushu | Ukusebenza -10 ° C - +50 ° C; Ugcino – 40°C – +85°C | |
| Ubuntu bezizalwane | I-5 ukuya kwi-95% ye-RH (ngaphandle kokudibanisa) | |
| Izihlanganisi | Ubukhulu 2.5 mm2 | |
| Ubungakanani | 90 mm x 56,4 mm x 17,5 mm | |
| Ukunyuka | I-DIN yokunyuswa kukaloliwe (DIN EN 50022) | |
| Izinto zendlu | Iplastiki, iPC/ABS ezicimayo | |
IPhaneli ephezulu
UQHAGAMSHELO LWEZIPHUMO
Umqulutagimveliso
Imveliso yangoku
UQHAGAMSHELO LWEMIGALELO
Amagalelo edijithali
ISILUMKISO
- Qaphela, i-wiring engalunganga yale mveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe ngokuchanekileyo iintambo phambi kokuba uvule umbane.
- Phambi kocingo, okanye ukususa/ukunyuswa kwemveliso, qiniseka ukuba Ucime umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, ukothuka, indlela yokunyuka, umoya, njl. njl.). Ukusilela ukwenza oko kunokubangela umlilo okanye umsebenzi ongalunganga.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungaqini ngokwaneleyo kweengcingo kwitheminali kunokubangela umlilo.
IZITHOMBE ZESIXHOBO
Bhalisa ukufikelela
| Modbus | Disemba | Hex | Bhalisa Igama | Ukufikelela | Inkcazo |
| 30001 | 0 | 0x00 | Uguqulelo/Uhlobo | Funda | Inguqulelo kunye noHlobo lwesixhobo |
| 30002 | 1 | 0x01 | Idilesi | Funda | Idilesi yemodyuli |
| 40003 | 2 | 0x02 | Ireyithi yeBaud | Funda & Bhala | Ixabiso le-baud RS485 |
| 40004 | 3 | 0x03 | Misa amasuntswana kunye neeBits zeDatha | Funda & Bhala | Inani lokumisa amasuntswana kunye neeBits zeDatha |
| 40005 | 4 | 0x04 | Ukulingana | Funda & Bhala | Ubunzima |
| 40006 | 5 | 0x05 | Ukulibaziseka kwempendulo | Funda & Bhala | Ukulibaziseka kwempendulo kuNks |
| 40007 | 6 | 0x06 | Indlela yeModbus | Funda & Bhala | Indlela yeModbus (ASCII okanye RTU) |
| 40009 | 8 | 0x08 | Umlindi | Funda & Bhala | Umlindi |
| 40013 | 12 | Ngama-0x0C | Imeko yesiphumo esiMiselweyo | Funda & Bhala | Imeko yemveliso ehlala ikho (emva kombane okanye ukusetwa ngokutsha kwedogdog) |
| 40033 | 32 | 0x20 | Iipakethi ezifunyenweyo ze-LSR (Ubuncinci buBalulekileyo.) | Funda & Bhala |
Inani leepakethi ezifunyenweyo |
| 40034 | 33 | 0x21 | Iipakethi ezifunyenweyo ze-MSR (Ezona nkcukacha ziBalulekileyo.) | Funda & Bhala | |
| 40035 | 34 | 0x22 | Iipakethe ezingalunganga ze-LSR | Funda & Bhala | Inani lepakethi ezifunyenweyo ezinempazamo |
| 40036 | 35 | 0x23 | Iipakethe ezingalunganga ze-MSR | Funda & Bhala | |
| 40037 | 36 | 0x24 | Iipakethi ezithunyelweyo ze-LSR | Funda & Bhala | Inani leepakethi ezithunyelweyo |
| 40038 | 37 | 0x25 | Iipakethi ezithunyelweyo ze-MSR | Funda & Bhala | |
| 30051 | 50 | 0x32 | Igalelo | Funda | Imeko yokufaka |
| 40052 | 51 | 0x33 | Iziphumo | Funda & Bhala | Imeko yemveliso |
| 40053 | 52 | 0x34 | Ikhawuntara ye-1 LSR | Funda & Bhala | 32-bit counter 1 |
| 40054 | 53 | 0x35 | Ikhawuntara yoku-1 ye-MSR | Funda & Bhala | |
| 40055 | 54 | 0x36 | Ikhawuntara ye-2 LSR | Funda & Bhala | 32-bit counter 2 |
| 40056 | 55 | 0x37 | Ikhawuntara yoku-2 ye-MSR | Funda & Bhala | |
| 40061 | 60 | Ngama-0x3C | Ikhawuntara ye-1 LSR | Funda & Bhala | Ixabiso le-32-bit yekhawunta efakiweyo 1 |
| 40062 | 61 | 0x3D | Ikhawuntara yoku-1 ye-MSR | Funda & Bhala | |
| 40063 | 62 | 0x3E | Ikhawuntara ye-2 LSR | Funda & Bhala | Ixabiso le-32-bit yekhawunta efakiweyo 2 |
| 40064 | 63 | 0x3F | Ikhawuntara yoku-2 ye-MSR | Funda & Bhala | |
|
40069 |
68 |
0x44 |
i-Counter Config 1 |
Funda & Bhala |
Uqwalaselo Lwekhawuntara
+1 – umlinganiselo wexesha (ukuba u-0 ubala iimpembelelo) +2 – Ikhawuntara yokubambisa ngokuzenzekela rhoqo ngomzuzwana omnye +4 – ixabiso lokubamba xa igalelo liphantsi +8 – seta kwakhona ikhawunta emva kokubambisa +16 – seta kwakhona isibali ukuba igalelo liphantsi +32 – umfaki khowudi |
|
40070 |
69 |
0x45 |
i-Counter Config 2 |
Funda & Bhala |
|
| 40073 | 72 | 0x48 | Bamba | Funda & Bhala | Ukubamba ikhawuntara |
| 40074 | 73 | 0x49 | Ubume | Funda & Bhala | Ikhawuntara ethathiweyo |
ISIKHOKELO SOKUFAKA
Nceda ufunde imiyalelo phambi kokuba usebenzise okanye usebenzise isixhobo. Kwimeko yayo nayiphi na imibuzo emva kokufunda olu xwebhu, nceda uqhagamshelane neQela leNkxaso le-iSMA CONTROLLI (support@ismacontrolli.com).
- Ngaphambi kocingo okanye ukususa / ukunyuswa kwemveliso, qiniseka ukuba ucima umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- I-wiring engafanelekanga yemveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe iintambo ngokuchanekileyo phambi kokuba uvule umbane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso kuphela ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, umothuko, indlela yokunyuka, umoya, njl. njl.). Ukungakwenzi oko kunokubangela umlilo okanye umsebenzi onempazamo.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungakwenzi oko kunokubangela umlilo.
- Kuphephe ukufaka imveliso kwindawo ekufutshane nezixhobo zombane ezinamandla aphezulu kunye neentambo, imithwalo yokungenisa, kunye nezixhobo zokutshintsha. Ukusondela kwezinto ezinjalo kunokubangela ukuphazamiseka okungalawulwayo, okukhokelela ekusebenzeni okungazinzanga kwemveliso.
- Ukulungelelaniswa okufanelekileyo kwamandla kunye ne-signal cabling kuchaphazela ukusebenza kwayo yonke inkqubo yokulawula. Kuphephe ukubeka amandla kunye neengcingo zomqondiso kwiitreyi zentambo ezihambelanayo. Inokubangela ukuphazamiseka kwiimpawu ezibekwe esweni kunye nokulawula.
- Kunconywa kubalawuli bamandla / iimodyuli kunye nababoneleli bamandla be-AC / DC. Banikezela nge-insulation engcono kwaye ezinzileyo yezixhobo xa kuthelekiswa neenkqubo ze-AC / AC ze-transformer, ezihambisa ukuphazamiseka kunye neziganeko ezidlulayo ezifana nokunyuka kunye nokuqhuma kwizixhobo. Bakwahlukanisa iimveliso ezivela kwi-inductive phenomena kwezinye ii-transformers kunye nemithwalo.
- Iinkqubo zonikezelo lwamandla kwimveliso kufuneka zikhuselwe zizixhobo zangaphandle ezinciphisa ukugqithiswa kombanetage kunye neziphumo zokukhutshwa kombane.
- Gwema ukunika amandla imveliso kunye nezixhobo ezilawulwayo / ezibekwe esweni, ngakumbi amandla aphezulu kunye nemithwalo ye-inductive, ukusuka kumthombo wamandla omnye. Izixhobo zamandla ezivela kumthombo wamandla omnye zibangela umngcipheko wokwazisa ukuphazamiseka kwimithwalo ukuya kwizixhobo zokulawula.
- Ukuba i-AC / AC i-transformer isetyenziselwa ukubonelela ngezixhobo zokulawula, kucetyiswa ngamandla ukuba kusetyenziswe ubuninzi be-100 VA Class 2 transformer ukuphepha imiphumo engafunekiyo ye-inductive, eyingozi kwizixhobo.
- Imigca emide yokubeka iliso kunye nokulawula inokubangela iilophu malunga nokunikezelwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwezixhobo, kubandakanywa unxibelelwano lwangaphandle. Kunconywa ukusebenzisa i-galvanic separators.
- Ukukhusela umqondiso kunye nemigca yonxibelelwano ngokuchasene nokuphazamiseka kwe-electromagnetic yangaphandle, sebenzisa iintambo ezikhuselekileyo eziphantsi kunye namaso e-ferrite.
- Ukutshintshela ukuhanjiswa kwemveliso yedijithali yemithwalo emikhulu (egqithileyo) imithwalo ye-inductive kunokubangela ukuphazamiseka kwe-pulses kumbane ofakwe ngaphakathi kwemveliso. Ngoko ke, kucetyiswa ukuba kusetyenziswe ii-relays zangaphandle / abafowunelwa, njl njl ukutshintsha imithwalo enjalo. Ukusetyenziswa kwabalawuli abaneziphumo ze-triac kwakhona kunciphisa ukugqithisa okufanayotage iziganeko.
- Iimeko ezininzi zokuphazamiseka kunye nokugqithisatagkwiisistim zolawulo ziveliswa ngokutshintshwa, imithwalo ye-inductive enikezelwa ngokutshintshana kwee-mains vol.tage (AC 120/230 V). Ukuba abanazo iisekethe ezifanelekileyo ezakhelwe ngaphakathi zokunciphisa ingxolo, kucetyiswa ukuba kusetyenziswe iisekethe zangaphandle ezifana ne-snubbers, i-varistors, okanye i-diode yokukhusela ukunciphisa ezi ziphumo.
Ukufakwa kombane kule mveliso kufuneka kwenziwe ngokuhambelana neekhowudi zocingo zelizwe kwaye zihambelane nemimiselo yendawo.
iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy | support@ismacontrolli.com
www.ismacontrolli.com Isikhokelo soFakelo | 1st Umba Rev. 1 | 05/2022
Amaxwebhu / Izibonelelo
 |
iSMACONTROLLI SFAR-1M-2DI1AO 2 iiNgeniso zeDijithali kunye ne-1 ye-Analog Output Modbus IO Module [pdf] Incwadi Yomyalelo I-SFAR-1M-2DI1AO, i-2 ye-Digital Inputs kunye ne-1 ye-Analog Output Modbus IO Imodyuli, i-1 ye-Analog Output Modbus IO Module, i-Output Modbus IO Module, Modbus IO Module, SFAR-1M-2DI1AO, Imodyuli |
