iSMACONTROLLI SFAR-1M-2DI1AO 2 Digital Inputs le 1 Analog Output Modbus IO Module
| TS'ELISO | ||
| Phepelo ea motlakase | Moqtage | 10-38 V DC; 10-28 V AC |
| Tšebeliso ea matla | 2 W @ 24 V DC; 4 VA @ 24 V AC | |
|
Liphetho tsa analog |
1x Moqtagtlhahiso | 0 V÷10 V (resolution 1,5 mV) |
| 1x Sephetho sa hajoale | 0 mA÷20 mA (qeto 5 uA) | |
| 4 mA÷20 mA (qeto 16 uA) | ||
| Lisebelisoa tsa dijithale | 2x, e utloahalang "0": 0-3 V, e utloahalang "1": 6-38 V | |
| Libali | 2x, Qeto 32-bits Frequency max 1 kHz | |
| sekhahla sa bolutu | Ho tloha ho 2400 ho isa ho 115200 bps | |
| Tšireletso ea ho kena | IP40 - bakeng sa ho kenya ka hare ho ntlo | |
| Mocheso | Ho sebetsa -10°C - +50°C; Sebaka sa polokelo - 40°C - +85°C | |
| Mongobo o amanang | 5 ho 95% RH (ntle le condensation) | |
| Lihokelo | Boholo ba 2.5 mm2 | |
| Boemo | 90 mm x 56,4 mm x 17,5 mm | |
| Ho phahamisa | Ho kenya seporo sa DIN (DIN EN 50022) | |
| Thepa ea matlo | Plastiki, PC / ABS e itimang | |
SEKONYELA SEHLOHO
KHOkahanyo LITLHOKO
Moqtagtlhahiso
Sephetho sa hajoale
KHOLALA MPEPI
Lisebelisoa tsa dijithale
TLHOKOMELO
- Hlokomela, mohala o fosahetseng oa sehlahisoa sena o ka o senya mme oa lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Pele o kenya marang-rang, kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'oaetso ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'ebetso ea motlakase kapa ts'ebetso e fosahetseng.
- Sebelisa sehlahisoa ka har'a mekhahlelo ea ts'ebetso e khothalelitsoeng ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, tsela e holimang, sepakapaka jj.). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.
- Ka tieo tiisa lithapo ho terminal. Ho se tiise lithapo tse lekaneng ho ka baka mollo.
LITŠOANTŠISO TŠEBELE
Ngolisa phihlello
| Modbus | Dec | Hex | Ngolisa Lebitso | Phihlello | Tlhaloso |
| 30001 | 0 | 0x00 | Mofuta/Mofuta | Bala | Phetolelo le Mofuta oa sesebelisoa |
| 30002 | 1 | 0x01 | Aterese | Bala | Aterese ea Mojule |
| 40003 | 2 | 0x02 | Sekhahla sa Baud | Bala & Ngola | Sekhahla sa baud sa RS485 |
| 40004 | 3 | 0x03 | Emisa Bits & Data Bits | Bala & Ngola | No of Stop bits & Data Bits |
| 40005 | 4 | 0x04 | Parity | Bala & Ngola | Parity hanyane |
| 40006 | 5 | 0x05 | Karabelo e lieha | Bala & Ngola | Ho lieha ha karabelo ho mof |
| 40007 | 6 | 0x06 | Mokhoa oa Modbus | Bala & Ngola | Mokhoa oa Modbus (ASCII kapa RTU) |
| 40009 | 8 | 0x08 | Mohlokomedi | Bala & Ngola | Mohlokomedi |
| 40013 | 12 | 0x0C | Boemo bo sa Feleng ba Tlhahiso | Bala & Ngola | Boemo ba kamehla ba tlhahiso (ka mor'a hore motlakase o bulele kapa o beoe bocha) |
| 40033 | 32 | 0x20 | Lipakete tse amohetsoeng LSR (Reg.) | Bala & Ngola |
Che ea lipakete tse amoheloang |
| 40034 | 33 | 0x21 | Lipakete tse amohetsoeng tsa MSR (Tlhaloso ea Bohlokoa ka ho Fetisisa) | Bala & Ngola | |
| 40035 | 34 | 0x22 | Lipakete tse fosahetseng LSR | Bala & Ngola | Che ea lipakete tse amohetsoeng tse nang le phoso |
| 40036 | 35 | 0x23 | Lipakete tse fosahetseng tsa MSR | Bala & Ngola | |
| 40037 | 36 | 0x24 | Lipakete tse rometsoeng LSR | Bala & Ngola | Che ea lipakete tse rometsoeng |
| 40038 | 37 | 0x25 | Lipakete tse rometsoeng tsa MSR | Bala & Ngola | |
| 30051 | 50 | 0x32 | Lintho tse kenang | Bala | Boemo ba ho kenya |
| 40052 | 51 | 0x33 | Litholoana | Bala & Ngola | Boemo ba tlhahiso |
| 40053 | 52 | 0x34 | Counter 1 LSR | Bala & Ngola | 32-bit counter 1 |
| 40054 | 53 | 0x35 | Counter 1 MSR | Bala & Ngola | |
| 40055 | 54 | 0x36 | Counter 2 LSR | Bala & Ngola | 32-bit counter 2 |
| 40056 | 55 | 0x37 | Counter 2 MSR | Bala & Ngola | |
| 40061 | 60 | 0x3C | Ccounter 1 LSR | Bala & Ngola | 32-bit boleng ba k'haontareng e hapiloeng 1 |
| 40062 | 61 | 0x3D | Ccounter 1 MSR | Bala & Ngola | |
| 40063 | 62 | 0x3E | Ccounter 2 LSR | Bala & Ngola | 32-bit boleng ba k'haontareng e hapiloeng 2 |
| 40064 | 63 | 0x3F | Ccounter 2 MSR | Bala & Ngola | |
|
40069 |
68 |
0x44 |
Counter Config 1 |
Bala & Ngola |
Counter Configuration
+1 - tekanyo ea nako (haeba 0 ho bala tšusumetso) +2 - k'haonte ea ho tšoasa ka bohona motsotsoana o mong le o mong +4 - boleng ba ho tšoasa ha kenyo e le tlase +8 - seta khaonta bocha kamora ho ts'oara +16 - seta k'hamera botjha haeba kenyo e le tlase +32 – encoder |
|
40070 |
69 |
0x45 |
Counter Config 2 |
Bala & Ngola |
|
| 40073 | 72 | 0x48 | Tšoasa | Bala & Ngola | Khaontara ea ho tšoasa |
| 40074 | 73 | 0x49 | Boemo | Bala & Ngola | Khaonta e hapiloeng |
TS'ELISO TS'OANE
Ka kopo bala litaelo pele u sebelisa kapa u sebelisa sesebelisoa. Haeba ho na le lipotso ka mor'a ho bala tokomane ena, ka kopo ikopanye le Sehlopha sa Tšehetso sa iSMA CONTROLLI (support@ismacontrolli.com).
- Pele o kenya mohala kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.
- Wiring e sa nepahalang ea sehlahisoa e ka e senya 'me ea lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'okelo ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'okelo ea motlakase kapa ts'ebetso e fosahetseng.
- Sebelisa sehlahisoa feela ka har'a mekhahlelo ea ts'ebetso e khothalletsoang ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, moo ho hloellang teng, sepakapaka, joalo-joalo). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.
- Ka tieo tiisa lithapo ho terminal. Ho hlōleha ho etsa joalo ho ka baka mollo.
- Qoba ho kenya sehlahisoa haufi le lisebelisoa tsa motlakase tse matla a phahameng le lithapo, li-inductive loads le li-switching. Ho ba haufi le lintho tse joalo ho ka baka tšitiso e sa laoleheng, e bakang ts'ebetso e sa tsitsang ea sehlahisoa.
- Tlhophiso e nepahetseng ea matla le pontšo ea cabling e ama ts'ebetso ea tsamaiso eohle ea taolo. Qoba ho kenya motlakase le lithapo tsa mats'oao ka har'a literei tsa cable tse bapileng. E ka etsa hore ho be le litšitiso ho matšoao a behiloeng leihlo le ho laola.
- E khothalletsoa ho laola matla / li-module tse nang le bafani ba motlakase ba AC / DC. Ba fana ka insulation e ntlafetseng le e tsitsitseng haholoanyane bakeng sa lisebelisoa ha e bapisoa le lisebelisoa tsa AC / AC transformer, tse fetisang likhathatso le liketsahalo tsa nakoana tse kang ho surge le ho phatloha ho lisebelisoa. Li boetse li arola lihlahisoa ho tsoa ho li-inductive phenomena ho tsoa ho li-transformer tse ling le meroalo.
- Sistimi ea phepelo ea motlakase bakeng sa sehlahisoa e lokela ho sireletsoa ke lisebelisoa tsa kantle tse fokotsang ho fetatage le liphello tsa ho tsoa ha lehalima.
- Qoba ho matlafatsa sehlahisoa le lisebelisoa tsa sona tse laoloang / tse hlokometsoeng, haholo-holo matla a phahameng le meroalo e kenyang matla, ho tsoa mohloling o le mong oa matla. Lisebelisoa tsa matla tse tsoang mohloling o le mong oa matla li baka kotsi ea ho hlahisa litšitiso ho tloha mejaro ho ea ho lisebelisoa tsa taolo.
- Haeba AC/AC transformer e sebelisoa ho fana ka lisebelisoa tsa taolo, ho khothaletsoa ka matla ho sebelisa sefetoleli se phahameng sa 100 VA Class 2 ho qoba litlamorao tse sa batleheng, tse kotsi bakeng sa lisebelisoa.
- Mehala e telele ea ho shebella le ho laola e ka baka li-loops mabapi le phepelo ea motlakase e arolelanoang, e bakang litšitiso ts'ebetsong ea lisebelisoa, ho kenyelletsa le puisano ea kantle. Ho khothalletsoa ho sebelisa li-separators tsa galvanic.
- Ho sireletsa likhoele tsa mats'oao le likhokahano khahlano le litšitiso tse kantle tsa motlakase, sebelisa likhoele tse sirelelitsoeng hantle le lifaha tsa ferrite.
- Ho fetola liphatlalatso tsa dijithale tsa meroalo e meholo e kholo (e fetelletseng) ho ka baka tšitiso ho lisebelisoa tsa elektroniki tse kentsoeng ka har'a sehlahisoa. Ka hona, ho kgothaletswa ho sebelisa li-relay / li-contactor tse ka ntle, joalo-joalo ho fetola meroalo e joalo. Tšebeliso ea li-controller tse nang le liphetho tsa triac li boetse li fokotsa overvolve e tšoanangtage phenomena.
- Liketsahalo tse ngata tsa tšitiso le ho fetellatage in control system e hlahisoa ke switched, inductive loads e fanoang ke alternating mains vol.tage (AC 120/230 V). Haeba li se na li-circuits tse hahelletsoeng kahare tsa ho fokotsa lerata, ho khothaletsoa ho sebelisa lipotoloho tse kantle joalo ka li-snubber, li-varistors, kapa li-diode tsa ts'ireletso ho fokotsa litlamorao.
Ho kenngoa ha motlakase oa sehlahisoa sena ho tlameha ho etsoa ho ea ka likhoutu tsa wiring tsa naha le ho lumellana le melao ea libaka.
iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy | support@ismacontrolli.com
www.ismacontrolli.com Tataiso ea ho Kena| Khatiso ea 1 Rev. 1 | 05/2022
Litokomane / Lisebelisoa
 |
iSMACONTROLLI SFAR-1M-2DI1AO 2 Digital Inputs le 1 Analog Output Modbus IO Module [pdf] Buka ea Taelo SFAR-1M-2DI1AO, 2 Digital Inputs le 1 Analog Output Modbus IO Module, 1 Analog Output Modbus IO Module, Output Modbus IO Module, Modbus IO Module, SFAR-1M-2DI1AO, Mojule |
