iSMACONTROLLI SFAR-1M-2DI1AO 2 Digital Inputs uye 1 Analog Output Modbus IO Module
| KUTAURA | ||
| Magetsi | Voltage | 10-38 V DC; 10-28 V AC |
| Simba rekushandisa | 2 W @ 24 V DC; 4 VA @ 24 V AC | |
|
Analogi zvabuda |
1x Voltage kubuda | 0 V÷10 V (chisarudzo 1,5 mV) |
| 1x Zvazvino zvabuda | 0 mA÷20 mA (chisarudzo 5 uA) | |
| 4 mA÷20 mA (chisarudzo 16 uA) | ||
| Digital inputs | 2x, zvine musoro “0”: 0-3 V, zvine musoro “1”: 6-38 V | |
| Counters | 2x, Resolution 32-bits Frequency max 1 kHz | |
| Bhaudrate | Kubva 2400 kusvika 115200 bps | |
| Ingress kudzivirira | IP40 - yekuisa mukati memukati | |
| Tembiricha | Kushanda -10°C - +50°C; Kuchengetedza - 40°C - +85°C | |
| Hunyoro hunyoro | 5 kusvika 95% RH (pasina condensation) | |
| Connectors | Hukuru 2.5 mm2 | |
| Dimension | 90 mm x 56,4 mm x 17,5 mm | |
| Mounting | DIN njanji inokwira (DIN EN 50022) | |
| Zvinhu zveimba | Plastiki, inodzima PC/ABS | |
TOP PANEL
CONNECTION OF OUTPUTS
Voltage kubuda
Ikozvino kubuda
CONNECTION OF INPUTS
Digital inputs
YAMBIRO
- Cherechedza, wiring isiriyo yechigadzirwa ichi inogona kukuvadza uye kutungamirira kune dzimwe njodzi. Ita shuwa kuti chigadzirwa chave nemawaya zvakanaka usati wabatidza magetsi.
- Usati waita waya, kana kubvisa / kusimudza chigadzirwa, iva nechokwadi chekudzima simba. Kutadza kuzviita kunogona kukonzera kuvhunduka kwemagetsi.
- Usabate mativi anochajiswa nemagetsi sematerminals emagetsi. Kuita izvi kunogona kukonzera kuvhunduka kwemagetsi.
- Usabvisa chigadzirwa. Kuita izvi kunogona kukonzera kuvhunduka kwemagetsi kana kuti kushanda kusina kunaka.
- Shandisa chigadzirwa mukati memaitiro ekushanda anokurudzirwa mune yakatarwa (tembiricha, humidity, voltage, kuvhunduka, kukwira kutungamira, mamiriro ekunze nezvimwe). Kutadza kuita izvi kunogona kukonzera moto kana kutadza kushanda zvakanaka.
- Simbisa waya kune terminal. Kusasimba zvakakwana kwewaya kuchiteshi kunogona kukonzera moto.
TERMINALS OF THE DEVICE
Kunyoresa kuwana
| Modbus | Dec | Hex | Register Zita | Access | Tsanangudzo |
| 30001 | 0 | 0x00 | Version/Type | Verenga | Shanduro uye Rudzi rwechigadzirwa |
| 30002 | 1 | 0x01 | Kero | Verenga | Module Kero |
| 40003 | 2 | 0x02 | Baud rate | Verenga & Nyora | RS485 baud chiyero |
| 40004 | 3 | 0x03 | Misa Bits & Data Bits | Verenga & Nyora | Kwete yeStop bits & Data Bits |
| 40005 | 4 | 0x04 | Parity | Verenga & Nyora | Parity zvishoma |
| 40006 | 5 | 0x05 | Mhinduro Kunonoka | Verenga & Nyora | Mhinduro kunonoka muna ms |
| 40007 | 6 | 0x06 | Modbus Mode | Verenga & Nyora | Modbus Mode (ASCII kana RTU) |
| 40009 | 8 | 0x08 | Watchdog | Verenga & Nyora | Watchdog |
| 40013 | 12 | 0x0C | Default Output State | Verenga & Nyora | Default inobuda mamiriro (mushure mesimba kana kuti watchdog reset) |
| 40033 | 32 | 0x20 | Mapaketi akagamuchirwa LSR (Isina Kukosha Reg.) | Verenga & Nyora |
Hapana emapaketi akagamuchirwa |
| 40034 | 33 | 0x21 | Yakagamuchira mapaketi MSR (Yakanyanya Yakakosha Reg.) | Verenga & Nyora | |
| 40035 | 34 | 0x22 | Mapaketi asina kururama LSR | Verenga & Nyora | Hapana emapaketi akagamuchirwa ane kukanganisa |
| 40036 | 35 | 0x23 | Mapaketi asina kururama MSR | Verenga & Nyora | |
| 40037 | 36 | 0x24 | Akatumira mapaketi LSR | Verenga & Nyora | Kwete yemapaketi akatumirwa |
| 40038 | 37 | 0x25 | Akatumira mapaketi MSR | Verenga & Nyora | |
| 30051 | 50 | 0x32 | Inputs | Verenga | Inputs state |
| 40052 | 51 | 0x33 | Outputs | Verenga & Nyora | Output state |
| 40053 | 52 | 0x34 | Counter 1 LSR | Verenga & Nyora | 32-bit counter 1 |
| 40054 | 53 | 0x35 | Counter 1 MSR | Verenga & Nyora | |
| 40055 | 54 | 0x36 | Counter 2 LSR | Verenga & Nyora | 32-bit counter 2 |
| 40056 | 55 | 0x37 | Counter 2 MSR | Verenga & Nyora | |
| 40061 | 60 | 0x3C | CCounter 1 LSR | Verenga & Nyora | 32-bit kukosha kweakabatwa counter 1 |
| 40062 | 61 | 0x3D | CCounter 1 MSR | Verenga & Nyora | |
| 40063 | 62 | 0x3E | CCounter 2 LSR | Verenga & Nyora | 32-bit kukosha kweakabatwa counter 2 |
| 40064 | 63 | 0x3F | CCounter 2 MSR | Verenga & Nyora | |
|
40069 |
68 |
0x44 |
Counter Config 1 |
Verenga & Nyora |
Counter Configuration
+1 - kuyera nguva (kana 0 kuverenga mafungiro) +2 - autocatch counter yega yega 1 sec +4 - kukosha kwekubata kana kuiswa kwakaderera +8 - reset counter mushure mekubata +16 - reset counter kana yakaderera +32 - encoder |
|
40070 |
69 |
0x45 |
Counter Config 2 |
Verenga & Nyora |
|
| 40073 | 72 | 0x48 | Catch | Verenga & Nyora | Bata counter |
| 40074 | 73 | 0x49 | Status | Verenga & Nyora | Yakabatwa counter |
INSTALLATION GUIDELINE
Ndapota verenga rairo usati washandisa kana kushandisa mudziyo. Kana paine mibvunzo mushure mekuverenga gwaro iri, ndapota taura neSMA CONTROLLI Support Team (support@ismacontrolli.com).
- Usati waisa waya kana kubvisa / kusimudza chigadzirwa, ita shuwa yekudzima magetsi. Kutadza kuita izvi kunogona kukonzera kurohwa nemagetsi.
- Wiring isina kunaka yechigadzirwa inogona kuikuvadza uye inotungamirira kune dzimwe njodzi. Ita shuwa kuti chigadzirwa chave nemawaya zvakanaka usati wabatidza magetsi.
- Usabate mativi anochajiswa nemagetsi sematerminals emagetsi. Kuita izvi kunogona kukonzera kuvhunduka kwemagetsi.
- Usabvisa chigadzirwa. Kuita izvi kunogona kukonzera kuvhunduka kwemagetsi kana kutadza kushanda zvakanaka.
- Shandisa chigadzirwa chete mukati memaitiro ekushanda anokurudzirwa mune yakatarwa (tembiricha, humidity, voltage, kuvhunduka, kukwira kutungamira, mamiriro ekunze, nezvimwewo). Kutadza kuita izvi kunogona kukonzera moto kana kutadza kushanda zvakanaka.
- Simbisa waya kune terminal. Kutadza kuzviita kungakonzera moto.
- Regedza kuisa chigadzirwa padhuze nemagetsi ane simba guru midziyo uye tambo, inductive mitoro, uye switching michina. Kuva pedyo kwezvinhu zvakadaro kunogona kukonzera kukanganisa kusingadzoreki, zvichiita kuti kusagadzikana kushanda kwechigadzirwa.
- Kurongeka kwakakodzera kwesimba uye chiratidzo cabling kunokanganisa kushanda kweiyo yese control system. Dzivisa kuisa simba uye chiratidzo wiring mumatireyi etambo akafanana. Inogona kukonzera kukanganisa mukutariswa uye kutonga zviratidzo.
- Inokurudzirwa kusimba ma controller/modules ane AC/DC vatengesi vemagetsi. Ivo vanopa zvirinani uye zvakatsiga insulation zvemidziyo zvichienzaniswa ne AC/AC shanduri masisitimu, ayo anofambisa zvinokanganisa uye zvenguva pfupi zviitiko senge masurges uye kuputika kumidziyo. Ivo zvakare vanoparadzanisa zvigadzirwa kubva kune inductive phenomena kubva kune mamwe ma transformer uye mitoro.
- Masisitimu ekupa magetsi echigadzirwa anofanirwa kuchengetedzwa nemidziyo yekunze inodzikamisa overvoltage uye mhedzisiro yemheni inobuda.
- Dzivisa kupa simba chigadzirwa nemidziyo yayo inodzorwa/inotariswa, kunyanya simba repamusoro uye inductive mitoro, kubva kune imwechete magetsi sosi. Zvishandiso zvemagetsi kubva kune imwe simba sosi zvinokonzeresa njodzi yekuunza kukanganisa kubva kune mitoro kuenda kune yekudzora michina.
- Kana AC/AC transformer ikashandiswa kugovera zvigadziriso zvekushandisa, zvinokurudzirwa zvakanyanya kushandisa inodarika zana VA Kirasi 100 transformer kudzivirira zvisingadiwe inductive mhedzisiro, iyo ine njodzi kumidziyo.
- Kureba kwekutarisa uye kutonga mitsara kunogona kukonzera zvishwe zvine chekuita neiyo yakagovaniswa magetsi, zvichikonzera kukanganisa mukushanda kwemidziyo, kusanganisira kutaurirana kwekunze. Inokurudzirwa kushandisa galvanic separators.
- Kuchengetedza masaini uye mitsara yekutaurirana kubva kune ekunze kukanganiswa kwemagetsi, shandisa tambo dzakadzivirirwa zvakanaka uye ferrite bead.
- Kuchinja dhijitari inoburitsa relays yehombe (inodarika yakatarwa) inductive mitoro inogona kukonzera kukanganiswa pulses kune zvemagetsi zvakaiswa mukati mechigadzirwa. Nokudaro, zvinokurudzirwa kushandisa kunze relays / contactors, nezvimwewo kushandura mitoro yakadaro. Iko kushandiswa kwezvidzori zvine triac zvinobuda zvakare kunoganhura zvakafanana overvoltage phenomena.
- Zviitiko zvakawanda zvekuvhiringidzika uye kuwandisatage in control system inogadzirwa nekuchinja, inductive mitoro inopihwa nealternating mains vol.tage (AC 120/230 V). Kana vasina maseketi akakodzera akavakirwa-mukati ekuderedza ruzha, zvinokurudzirwa kushandisa maseketi ekunze akadai sema snubbers, varistors, kana kudzivirira diode kudzikamisa izvi.
Kuiswa kwemagetsi kwechigadzirwa ichi kunofanira kuitwa maererano nemitemo yenyika ye wiring uye inoenderana nemitemo yemunharaunda.
iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy | support@ismacontrolli.com
www.ismacontrolli.com Installation Guideline| 1st Nyaya rev. 1 | 05/2022
Zvinyorwa / Zvishandiso
 |
iSMACONTROLLI SFAR-1M-2DI1AO 2 Digital Inputs uye 1 Analog Output Modbus IO Module [pdf] Bhuku reMirayiridzo SFAR-1M-2DI1AO, 2 Digital Inputs uye 1 Analog Output Modbus IO Module, 1 Analog Output Modbus IO Module, Output Modbus IO Module, Modbus IO Module, SFAR-1M-2DI1AO, Module |
