IVC1S Series PLC Ukuqala ngokukhawuleza
Incwadi yokusebenzisa
IVC1S Series Programmable Logic Controller
Le ncwadana yokuqalisa ngokukhawuleza ikunika isikhokelo esikhawulezayo kuyilo, ukufakela, uqhagamshelo kunye nokugcinwa kwe-IVC1S series PLC, elungele ireferensi kwisiza. Ngokufutshane yaziswe kule ncwadana ziinkcazo zehardware, iimpawu, kunye nokusetyenziswa kwe-IVC1S uthotho lwePLC, kunye neendawo ozikhethelayo kunye ne-FAQ kwireferensi yakho. Ngokuodola ezi ncwadi zingasentla zomsebenzisi, qhagamshelana nomthengisi wakho we-INVT okanye i-ofisi yokuthengisa.
Intshayelelo
1.1 Ukutyunjwa koMfanekiso
Ukutyunjwa kwemodeli kuboniswe kulo mfanekiso ulandelayo.
KuBathengi:
Enkosi ngokukhetha iimveliso zethu. Ukuphucula imveliso kunye nokubonelela ngenkonzo engcono kuwe, unganceda ugcwalise ifom emva kokuba imveliso isetyenziswe inyanga e-1, kwaye uyithumele okanye uyithumele ngefeksi kwiZiko leNkonzo yabaThengi bethu? Siza kukuthumelela isikhumbuzo esigqwesileyo emva kokufumana iFomu yeMpendulo yoMgangatho weMveliso epheleleyo. Ngaphaya koko, ukuba unokusinika iingcebiso malunga nokuphucula imveliso kunye nomgangatho wenkonzo, uya kuwongwa ngesipho esikhethekileyo. Enkosi kakhulu!
IShenzhen INVT Electric Co., Ltd.
| Igama lomthengi | Tele | ||
| Idilesi | Ikhowudi yeziphu | ||
| Umzekelo | Umhla wokusetyenziswa | ||
| Umatshini SN | |||
| Imbonakalo okanye isakhiwo | |||
| Ukusebenza | |||
| Iphakheji | |||
| Izinto eziphathekayo | |||
| Ingxaki yomgangatho ngexesha lokusetyenziswa | |||
| Ingcebiso malunga nokuphucula | |||
Idilesi: I-INVT Guangming Technology Building, Songbai Road, Matian, District Guangming, Shenzhen, China
1.2 Isishwankathelo
Ulwandlalo lwemodyuli esisiseko luboniswe kulo mfanekiso ulandelayo ngokuthatha i-example ye IVC1S-1614MAR.
I-PORTO kunye ne-PORT1 ziitheminali zonxibelelwano. I-PORTO isebenzisa imowudi ye-RS232 ene-Mini DIN8 socket. I-PORT1 Ine-RS485. Ukutshintsha indlela yokukhetha ineendawo ezimbini:
ON kunye OFF.
1.3 Intshayelelo yetheminali
Uyilo lweetheminali zamanqaku e-I/O ahlukeneyo aboniswe ngezantsi:
1. Inqaku le-14, amanqaku ali-16, amanqaku angama-24
Itheminali yongeniso:
Itheminali yemveliso:
2. Amanqaku angama-30
Itheminali yongeniso:
Itheminali yemveliso:
3. Amanqaku angama-40
Itheminali yongeniso:
Itheminali yemveliso:
4. Amanqaku angama-60
Itheminali yongeniso:
Itheminali yemveliso:
5. Amanqaku angama-48
Itheminali yongeniso:
Itheminali yemveliso:
Ukunikezwa Amandla
Ukucaciswa kwe-PLC eyakhelwe ngaphakathi kwamandla kunye namandla kwiimodyuli zokwandisa zidweliswe kwitheyibhile elandelayo.
| Into | Iyunithi | Min. | Ikaliwe | Max. | Phawula | |
| Ukunikezelwa kwamandla voltage | Vac | 85 | 220 | 264 | Ukuqaliswa okuqhelekileyo kunye nokusebenza | |
| Ungeniso lwangoku | A | / | / | 2. | Igalelo: 90Vac, 100% imveliso | |
| Isiphumo yangoku |
5V/GND | mA | / | 600 | / | Amandla apheleleyo eemveliso ze-5V / GND kunye ne-24V / GND |
| 24V/GND | mA | / | 250 | / | ||
| 10.4W. Max. amandla emveliso: 15W (isixa sawo onke amasebe) | ||||||
| 24V/COM | mA | / | 250 | / | ||
iiNgeniso zeDijithali & neZiphumo
3.1 Iimpawu zegalelo kunye neNgcaciso
Iimpawu zegalelo kunye nespekthi ziboniswa ngolu hlobo lulandelayo:
| Into | Ukufakwa kwesantya esiphezulu iitheminali X0—X7 |
Itheminali yegalelo ngokubanzi | |
| Imo yokufaka | Imowudi yemvelaphi okanye imowudi yokutshona, isetiwe nge-s/s terminal | ||
| Iiparamitha zombane | Igalelo voltage | 24Vdc | |
| I-impedance yokufaka | 4k oh | 4k oh | |
| Ungeniso ON | Ukuchasana kwesekethe yangaphandle <400 Ω | ||
| Ungeniso CIMA | Ukuchasana kwesekethe yangaphandle> 24k Ω | ||
| Umsebenzi wokucoca | Isihluzo sedijithali | X0—X7 inomsebenzi wokuhluza idijithali. Ixesha lokuhluza: 0, 8, 16, 32 okanye 64ms (ikhethwe ngenkqubo yomsebenzisi) | |
| Isihluzi se-Hardware | Iitheminali zongeniso ngaphandle kwe-X0—X7 zezohluzo lwehardware. Ixesha lokucoca: malunga ne-10ms | ||
| Umsebenzi wesantya esiphezulu | X0— X7: ukubala ngesantya esiphezulu, ukuphazamisa, kunye nokubambisa i-pulse X0— X5: ukuya kuthi ga kwi-10kHz yokubala rhoqo Isixa se-frequency input kufuneka sibe ngaphantsi kwe-60kHz |
||
| Itheminali eqhelekileyo | Inye kuphela i-terminal eqhelekileyo: COM | ||
I-terminal yokufaka isebenze njengekhawuntara inomda ongaphezu kobuninzi bobuninzi. Nakuphi na ukuphindaphinda okungaphezulu kunoko kunokubangela ukubala okungachanekanga okanye ukusebenza kwenkqubo engaqhelekanga. Qinisekisa ukuba ilungiselelo leterminal yegalelo lifanelekile kwaye abenzi boluvo bangaphandle abasetyenziswayo bafanelekile.
Uqhagamshelo lwegalelo example
Lo mzobo ulandelayo ubonisa i-example ye-IVC1S-1614MAR, eqonda ulawulo olulula lokubeka. Iimpawu zokumisa ezisuka kwi-PG zifakwe kwi-terminals zokubala ngesantya esiphezulu i-XO kunye ne-Xt, izibonakaliso zokutshintsha umda ezifuna impendulo ye-speed-speed ingaba negalelo ngokusebenzisa i-high-speed terminals X2—X7. Ezinye iimpawu zomsebenzisi zinokufakwa ngazo naziphi na ezinye iitheminali zokufaka.
3.2 Ubume besiphumo kunye neNgcaciso
Itheyibhile ilandelayo ibonisa i-relay output kunye ne-transistor output.
| Into | Imveliso yokudlulisa | Imveliso yeTransistor |
| Imo yokuphuma | Xa imeko yemveliso ON, isiphaluka sivaliwe; CIMA, vula | |
| Itheminali eqhelekileyo | Ukwahlula ngamaqela amaninzi, ngalinye line-terminal ye-COMn eqhelekileyo, ifanelekile kwiisekethe zokulawula ezinobuchule obuhlukeneyo. Zonke iitheminali eziqhelekileyo zodwa omnye komnye | |
| Umqulutage | 220Vac; 24Vdc, akukho mfuneko yepolarity | I-24Vdc, i-polarity echanekileyo iyafuneka |
| Okwangoku | Ngokungqinelana nemveliso yombane (jonga kwiTheyibhile elandelayo ) | |
| Umahluko | Ukuqhuba okuphezulu voltage, umsinga omkhulu | Ukuqhuba okuncinci okwangoku, ukuphindaphinda okuphezulu, ubomi obude |
| Isicelo | Ilayisha ngokuphindaphindiweyo isenzo esisezantsi esifana ne-intermediate relay, ikhoyili yoqhagamshelwano, kunye nee-LEDs | Imithwalo ene-frequency ephezulu kunye nobomi obude, njenge-servo yokulawula ampi-lifier kunye ne-electromagnetic isenzo rhoqo |
Iimpawu zombane zeziphumo ziboniswe kolu luhlu lulandelayo.
| Into | I-terminal yemveliso yokudlulisa | Itheminali yemveliso yeTransistor | |
| Utshintsho voltage | Ngaphantsi kwe-250Vac, 30Vdc | I-5-24Vdc | |
| Ukwahlukaniswa kwesekethe | NgoRelay | Photo Coupler | |
| Isalathisi somsebenzi | Abafowunelwa bemveliso yokudlulisa ivaliwe, i-LED ivuliwe | I-LED ivuliwe xa i-optical coupler iqhutywa | |
| Ukuvuza kwangoku kwesekethe evulekileyo | / | Ngaphantsi kwe-0.1mA/30Vdc | |
| Ubuncinci bomthwalo | 2mA/5Vdc | 5mA (5-24Vdc) | |
| Max. imveliso yangoku | Umthwalo oxhathisayo | Inqaku le-2A/1; Amanqaku angama-84/4, usebenzisa iCOM Amanqaku angama-84/8, usebenzisa iCOM |
YO/Y1: 0.3A/1 inqaku. Abanye: 0.3A/1 inqaku, 0.8A/4 iphuzu, 1.24/6 iphuzu, 1.64/8 iphuzu. Ngaphezulu kwamanqaku e-8, ukwanda kwangoku kwangoku kwe-0.1A kwinqanaba ngalinye lokunyuka |
| Umthwalo osebenzayo | 220Vac, 80VA | YO/Y1: 7.2W/24Vdc Abanye: 12W/24Vdc |
|
| Umthwalo wokukhanyisa | 220Vac, 100W | YO/Y1: 0.9W/24Vdc Okunye: 1.5W/24Vdc | |
| Ixesha lokuphendula | CIMA → VULA | 20ms max | YO/Y1: 10us Abanye: 0.5ms |
| ON → CIMA | 20ms max | ||
| Y0, Y1 ubuninzi. imveliso frequency | / | Isitishi ngasinye: 100kHz | |
| Isiphumo setheminali eqhelekileyo | YO/ Y1-COMO; Y2/Y3-COM1. Emva kwe-Y4, iitheminali ezisi-8 zeMax zisebenzisa i-terminal eyodwa eyodwa eqhelekileyo | ||
| Ukhuseleko lwe-fuse | Hayi | ||
Uqhagamshelo lwemveliso example
Lo mzobo ulandelayo ubonisa i-example ye IVC1S-1614MAR. Amaqela ahlukeneyo emveliso anokudityaniswa kwiisekethe zesignali ezahlukeneyo ezinevolthi eyahlukileyotages. Ezinye (ezifana ne-YO-COMO) zixhunywe kwisiphaluka se-24Vdc esinikwe amandla yi-24V-COM yendawo, ezinye (ezifana ne-Y2-COM1) zixhunyiwe kwi-5Vdc low vol.tagi-signal circuit, kunye nezinye (ezifana neY4 —Y7) ziqhagamshelwe kwi-220Vac voltage isekethe yomqondiso.
Izibuko loNxibelelwano
I-IVC1S yochungechunge lwe-PLC imodyuli esisiseko ineechweba ezintathu zonxibelelwano ezilandelelanayo ezilinganayo: I-PORTO kunye ne-PORT1. Amaxabiso e-baud axhaswayo:
| 115200 bps | 57600 bps | 38400 bps | 19200 bps |
| 9600 bps | 4800 bps | 2400 bps | 1200 bps |
Utshintsho lokukhetha imo lumisela inkqubo yonxibelelwano.
| Phina No. | Igama | Inkcazo |
| 3 | GND | Umhlaba |
| 4 | RXD | Idatha yothotho yokufumana iphini (ukusuka kwiRS232 ukuya kwiPLC) |
| 5 | TXD | Uthotho lokuthumela iphini ledatha (ukusuka kwi-PLC ukuya kwi-RS232) |
| 1, 2, 6, 7, 8 | Igciniwe | Isikhonkwane esingachazwanga, sishiye simisiwe |
Njenge-terminal enikezelwe kwinkqubo yomsebenzisi, i-PORTO inokuguqulwa kwiprothokholi yeprogram ngokusebenzisa iswitsha yokhetho lwemo. Ubudlelwane phakathi kwemeko yokusebenza kwe-PLC kunye neprotocol esetyenziswa yi-PORTO iboniswe kolu luhlu lulandelayo.
| Imowudi yokukhetha ukutshintsha indawo | ubume | PORTO iprotocol yokusebenza |
| ON | Ukubaleka | Iprothokholi yeNkqubo, okanye iprotocol yeModbus, okanye iprotocol ye-free-port, okanye N: Iprothokholi yenethiwekhi ye-N, njengoko kumiselwe yinkqubo yomsebenzisi kunye noqwalaselo lwenkqubo |
| CIMA | Yeka | Iguqulelwe kwiprothokholi yenkqubo |
I-PORT1 ilungele ukudibanisa nezixhobo ezikwazi ukunxibelelana (ezifana nee-inverters). Ngeprotocol yeModbus okanye iRS485 terminal free protocol, inokulawula izixhobo ezininzi ngenethiwekhi. Ii-terminals zayo zilungiswe ngezikrufu. Ungasebenzisa i-shielded twisted-pair njengentambo yomqondiso ukudibanisa izibuko zonxibelelwano ngokwakho.
Ukuhlohla
I-PLC iyasebenza kudidi loFakelo lwe-II, idigri yoNgcoliseko 2.
Imilinganiselo yoFakelo lwe-5.1
| Umzekelo | Ubude | Ububanzi | Ubude | Ubunzima |
| I-IVC1 S-0806MAR, IVC1 S-0806MAT | 135mm | 90mm | 71.2mm | 440g |
| I-IVC1S-1006MAR, IVC1S-1006MAT | 440g | |||
| I-IVC1S-1208MAR, IVC1S-1208MAT | 455g | |||
| I-IVC1S-1410MAR, IVC1S-1410MAT | 470g | |||
| I-IVC1S-1614MAR, IVC1S-1614MAT | 150mm | 90mm | 71.2mm | 650g |
| I-IVC1S-2416MAR, IVC1S-2416MAT | 182mm | 90mm | 71.2mm | 750g |
| I-IVC1S-3624MAR, IVC1S-3624MAT | 224.5mm | 90mm | 71.2mm | 950g |
| I-IVC1S-2424MAR, IVC1S-2424MAT | 224.5mm | 90mm | 71.2mm | 950g |
5.2 Indlela yoFakelo
DIN kaloliwe ukunyuswa
Ngokubanzi ungayinyusa i-PLC kumzila kaloliwe oyi-35mm-wide (DIN), njengoko kubonisiwe kulo mfanekiso ulandelayo.
Ukulungisa isikrufu
Ukulungisa i-PLC ngezikrufu kunokuma ukothuka okukhulu kunokufakwa kukaloliwe we-DIN. Sebenzisa izikrufu ze-M3 kwimingxuma yokufaka kwi-PLC evalelekileyo ukulungisa i-PLC kwi-backboard yekhabhinethi yombane, njengoko kubonisiwe kulo mfanekiso ulandelayo.
5.3. UQhagamshelwano lweCable kunye nokucaciswa
Ukuqhagamshela intambo yamandla kunye nentambo yokumisa
Ukudityaniswa kwamandla e-AC kunye namandla ancedisayo kuboniswa kulo mzobo ulandelayo.
Sicebisa ukuba ufake iingcingo kwisekethe yokhuseleko kwindawo yokufaka umbane. Jonga umfanekiso ongezantsi.
Qhagamshela i-PLC
i-terminal ukuya kwi-electrode yomhlaba. Ukuqinisekisa uqhagamshelo lwekhebula oluthembekileyo, elenza izixhobo zikhuseleke kwaye zikhuseleke kwi-EMI. sebenzisa i-AWG12 - 16 intambo, kwaye wenze intambo ibe mfutshane kangangoko. Sebenzisa isiseko esizimeleyo. Kuphephe ukwabelana ngendlela ngentambo yokumisa yezinye izixhobo (ingakumbi ezo zine-EMI eyomeleleyo). Jonga lo mfanekiso ulandelayo.
Ukucaciswa kwentambo
Xa udibanisa i-PLC, sebenzisa i-multi-strand copper wire kunye ne-insulated terminals ezilungiselelwe ukuqinisekisa umgangatho. Imodeli ephakanyisiweyo kunye nommandla we-cross-sectional wekhebula uboniswe kwitheyibhile elandelayo.
| Ucingo | Indawo enqamlezileyo | Imodeli ecetyiswayo | Ilugi yekhebula kunye netyhubhu yokunciphisa ubushushu |
| Intambo yombane ye-AC (L, N) | 1.0-2.0mm² | AWG12, 18 | H1.5/14 umjikelo intulated lug, okanye intambo cable lug |
| Intambo yomhlaba () |
2.0mm2 | AWG12 | I-H2.0/14 ejikelezileyo i-insulated lug, okanye isiphelo sentambo ekhonkxiweyo |
| Intambo yophawu lokufaka (X) | 0.8-1.0mm² | AWG18, 20 | UT1-3 okanye OT1-3 solderless lug Φ3 okanye Φ4 ityhubhu eshwabeneyo yobushushu |
| Intambo yomqondiso wesiphumo (Y) | 0.8-1.0mm² | AWG18, 20 |
Lungisa intloko yentambo elungisiweyo kwiitheminali zePLC ngezikrufu. I-torque yokuqinisa: 0.5-0.8Nm.
Indlela yokucubungula intambo ecetyiswayo iboniswe kulo mfanekiso ulandelayo.
Ukusebenza kwamandla kunye noLondolozo
6.1 Ukuqalisa
Jonga uqhagamshelo lwentambo ngononophelo. Qinisekisa ukuba i-PLC icacile kwizinto ezingaqhelekanga kwaye umjelo wokutshatyalaliswa kobushushu ucacile.
- Amandla kwi-PLC, isalathisi se-PLC AMANDLA kufuneka sivule.
- Qala i-Auto Station software kumamkeli kwaye ukhuphele inkqubo yomsebenzisi ehlanganisiweyo kwi-PLC.
- Emva kokujonga inkqubo yokukhuphela, tshintshela imowudi yokukhetha ukutshintshela kwindawo ye-ON, isalathisi se-RUN kufuneka sivule. Ukuba isalathisi se-ERR sivuliwe, inkqubo yomsebenzisi okanye inkqubo inephutha. Loop phezulu [V2/IVC1S series PLC Programming Manual kwaye ususe impazamo.
- Amandla kwi-PLC inkqubo yangaphandle ukuqalisa ukulungisa inkqubo.
6.2 ULondolozo lweMimiselo
Yenza oku kulandelayo:
- Qinisekisa ukuba iPLC iyindawo ecocekileyo. Yikhusele kubantu abavela kwamanye amazwe kunye nothuli.
- Gcina umoya kunye nokutshatyalaliswa kobushushu be-PLC kwimeko efanelekileyo.
- Qinisekisa ukuba uqhagamshelo lwentambo luthembekile kwaye lukwimeko entle.
Isilumkiso
- Ungaze udibanise imveliso ye-transistor kwisekethe ye-AC (njenge-220Vac). Uyilo lwesekethe yemveliso kufuneka luhambelane neemfuno zeeparamitha zombane, kwaye akukho over-voltage okanye over-current kuvumelekile.
- Sebenzisa abafowunelwa be-relay kuphela xa kukho imfuneko, kuba ixesha lokuphila labafowunelwa be-relay lixhomekeke kakhulu kumaxesha esenzo.
- Abafowunelwa be-relay banokuxhasa imithwalo encinci kune-2A. Ukuxhasa imithwalo emikhulu, sebenzisa abafowunelwa bangaphandle okanye i-mid-relay.
- Qaphela ukuba unxibelelwano lwe-relay lungasilela ukuvala xa umsinga ungaphantsi kwe-5mA.
Qaphela
- Uluhlu lwewaranti luvalelwe kuphela kwi-PLC.
- Ixesha lewaranti ziinyanga ezili-18, ngelo xesha i-INVT iqhuba ulondolozo lwasimahla kunye nokulungiswa kwe-PLC enayo nayiphi na impazamo okanye umonakalo phantsi kweemeko zokusebenza eziqhelekileyo.
- Ixesha lokuqala kwexesha lewaranti ngumhla wokuhanjiswa kwemveliso, apho imveliso yeSN isisiseko somgwebo. I-PLC ngaphandle kwemveliso yeSN iya kuthathwa njengengaphandle kwewaranti.
- Kwanangaphakathi kweenyanga ezili-18, isondlo siya kuhlawuliswa kwezi meko zilandelayo:
■ Umonakalo owenziwe kwi-PLC ngenxa yokungasebenzi kakuhle, okungahambelaniyo neNcwadana yoMsebenzisi;
■ Umonakalo owenziwe kwi-PLC ngenxa yomlilo, izikhukula, umthamo ongaqhelekangatage, njl.
■ Umonakalo owenziwe kwi-PLC ngenxa yokusetyenziswa ngokungafanelekanga kwemisebenzi ye-PLC. - Intlawulo yenkonzo iya kubizwa ngokweendleko kanye. Ukuba kukho nayiphi na ikhontrakthi, ikhontrakthi iyaphumelela.
- Nceda ugcine eli phepha kwaye ubonise eli phepha kwiyunithi yokugcina xa imveliso ifuna ukulungiswa.
- Ukuba unombuzo, nceda uqhagamshelane nomthengisi okanye inkampani yethu ngokuthe ngqo.
IShenzhen INVT Electric Co., Ltd.
Idilesi: INVT Guangming Technology Building, Songbai Road,
Matian, iSithili saseGuangming, eShenzhen, eTshayina
Webindawo: www.invt.com
Onke Amalungelo Agciniwe.
Imixholo yolu xwebhu ingatshintsha ngaphandle kwesaziso.
Inguqulelo: V1.0 202212
Amaxwebhu / Izibonelelo
 |
invt IVC1S Series Programmable Logic Controller [pdf] Incwadi yokusebenzisa IVC1S, IVC1S Series Programmable Logic Controller, IVC1S Series, Programmable Logic Controller, Logic Controller, Controller |
