I-Core IO - CR-IO-16DI
Incwadi yokusebenzisa
16 Point Modbus I/O Modyuli, 16 DI
INTSHAYELELO
Ngaphezuluview
Kufakelo oluninzi, ukuba nexabiso elisebenzayo, elomeleleyo, kunye nehardware elula iba yeyona nto iphambili ekuphumeleleni iprojekthi. I-Core lineup inika isisombululo esifanelekileyo ukuhlangabezana nale migaqo. In uye wabambisana no-Atimus, inkampani enobutyebi bamava ebaleni, kwaye inebhongo ngokubonisa iCore IO!
I-16DI ibonelela ngamagalelo edijithali ali-16. Kanye nokubeka esweni abafowunelwa be-volt-free, isixhobo sikwavumela ukusetyenziswa kweekhawunta ze-pulse.
Unxibelelwano lwe-BEMS lusekelwe kwi-Modbus RTU eyomeleleyo kwaye eqinisekisiweyo ngaphezu kwe-RS485 okanye i-Modbus TCP (imodeli ye-IP kuphela).
Uqwalaselo lwesixhobo lunokufezekiswa ngothungelwano usebenzisa nokuba yi web ujongano (uguqulelo lwe-IP kuphela) okanye iirejista zoqwalaselo lwe-Modbus, okanye ngokusebenzisa isixhobo se-Android kunye nokuqhagamshela ngeBluetooth usebenzisa i-app ezinikeleyo.
Le modeli ye-Core IO
Zombini iimodyuli ze-CR-IO-16DI-RS kunye ne-CR-IO-16DI-IP iimodyuli ziza kunye ne-8 input inputs.
I-CR-IO-16DI-RS iza kuphela ne-RS485 port, ngelixa i-CR-IO-16DI-IP iza kunye nee-RS485 kunye ne-IP port.
Zombini iimodeli nazo ziza neBluetooth ebhodini, ke ulungelelwaniso lunokufezekiswa kusetyenziswa isixhobo se-Android kunye neapp ezinikeleyo.
Imodeli ye-IP CR-IO-16DI-IP iphinda idibanise a web ujongano lomncedisi, olufikelelekayo ngePC web umkhangeli zincwadi.
I-hardware
Ngaphezuluview
Unikezelo lwaMandla oMbane
Ukufakwa kweeNgcaciso zeDijithali (DI)
Ukufaka iintambo kwinethiwekhi ye-RS485
Amanye amakhonkco aluncedo kwisiseko sethu solwazi webindawo:
Indlela yokufaka ucingo kwinethiwekhi yeRS485
https://know.innon.com/howtowire-non-optoisolated
Indlela yokuphelisa kunye nokuthambekela kwinethiwekhi ye-RS485
https://know.innon.com/bias-termination-rs485-network
Nceda uqaphele - zombini iinguqulelo ze-IP kunye ne-RS zingasebenzisa i-port ye-RS485 ukuphendula kwi-serial Modbus master comms esuka kwi-BEMS, kodwa akukho nguqulo inokusebenzisa i-RS485 port ukuze isebenze njenge-modbus master okanye isango.
Iphaneli ye-LED yangaphambili
I-LEDs kwiphaneli yangaphambili ingasetyenziselwa ukufumana impendulo ngokuthe ngqo kwimeko ye-I / Os ye-Core IO kunye nolwazi olubanzi.
Ngezantsi kukho iitheyibhile eziza kunceda ukucacisa ukuziphatha kwe-LED nganye.
DI 1 ukuya kwi-16
| Imowudi yoNgeniso yeDijithali | Iimeko | Imeko ye-LED |
| Ngqo | Vula isiphaluka Intambo emfutshane |
I-LED IVALIWE Ukukhanya kwe-LED |
| Umva | Vula isiphaluka Intambo emfutshane |
Ukukhanya kwe-LED I-LED IVALIWE |
| Ukufakwa kwe-Pulse | Ukufumana ukubetha kwentliziyo | I-LED iyadanyaza kuyo yonke i-pulse |
IBHASI kunye ne-RUN
| I-LED | Iimeko | Imeko ye-LED |
| BALEKA | I-Core IO ayiqhutywanga I-Core IO inikwe amandla ngokuchanekileyo |
I-LED IVALIWE Ukukhanya kwe-LED |
| IBHASI | Kufunyenwe idatha Idatha iyahanjiswa Ingxaki yokuma kwebhasi |
I-LED idanyaza eBomvu I-LED idanyaza eluhlaza okwesibhakabhaka I-LED ON Ebomvu |
QAPHELA I/O
Iingeniso zeDijithali
Ii-Digital Inputs zinokuba noqhagamshelwano olucocekileyo/olungena-volt oluqhagamshelwe kwi-Core IO ukufunda ubume bayo obuvuliweyo/evaliweyo.
Igalelo ngalinye ledijithali lingamiselwa ukuba libe:
- Ungeniso lweDijithali ngqo
- Ungeniso lweDijithali umva
- Ukufakwa kwe-Pulse
Ngelixa imowudi "ngqo" kunye "nokubuyisela umva" inokuthi ibuyisele imeko "False (0)" okanye "Yinyani (1)" xa umfowunelwa evuliwe okanye evaliwe, imo yesithathu "pulse input" isetyenziselwa ukubuyisela ikhawuntara. ukunyuka kwexabiso ngeyunithi enye ngalo lonke ixesha igalelo ledijithali livala; Nceda ufunde eli candelo lingezantsi ngeenkcukacha ezithe vetshe malunga nokubala kwe-pulse.
Ukubala kwePulse
Ii-Digital Inputs kunye ne-Universal Outputs zinokumiselwa ngokuthe ngqo ukuba zisebenze njengamagalelo okubalwa kwe-pulse.
I-frequency efundwayo ephezulu yokubala i-100Hz, kunye nomjikelezo womsebenzi we-50%, kwaye ubuninzi "uqhagamshelwano oluvaliweyo" ukuchasana okufundekayo ngu-50ohm.
Xa igalelo liqwalaselwe ukubala i-pulses, inani le-Modbus Registers liyafumaneka ngolwazi kunye nemiyalelo ngokukodwa kumsebenzi wokubala i-pulse.
Igalelo le-pulse, enyanisweni, liya kubala iitotali ezi-2 ngolu hlobo lulandelayo -
- Owokuqala uyaqhubeka; izakunyuka ngeyunithi enye kuyo yonke ipulse efunyenweyo kwaye izakugcina ukubala de kuthunyelwe umyalelo wokusetha ngokutsha ngeModbus.
- Enye itotali ibekwe ixesha. Ngokusisiseko, iya kunyuka ngeyunithi enye kwi-pulse nganye efunyenweyo kodwa iya kubala kuphela ixesha elichaziweyo (elinokulungiswa) (ngemizuzu). Xa ixesha liphelile, Igalelo ngalinye lokubala i-pulse lineerejista ze-Modbus ezilandelayo ezinxulumene nayo -
- ikhawuntara (itotaliza): le yeyona totali iphambili. Iza kubuyela ku "0" kuphela ukuba umyalelo wokusetha ngokutsha uthunyelwe, okanye ukuba i-Core IO ijikelezwe ngamandla - ungabhalela kweli xabiso ukubuyisela inani elidlulileyo ukuba ubuyisela imodyuli okanye ukusetha kwakhona kwi-0.
- ikhawuntara (ixesha): le yitotali yesibini, enexesha. Iza kubuyela kwi "0" rhoqo xa i-timer ifikelela kwixabiso eliphezulu lokumisela (ngokulibaziseka kwe-1 iminithi), okanye ukuba i-Core IO ijikeleza ngamandla. Ukuba ukusetha kwakhona kwekhawuta kuvuliwe, amanani ngaphakathi komjikelo onexesha aliyi kuhoywa kwaye isibali-xesha sisetyenziselwe kwakhona ku-0. Ukusetha ngokutsha akuyi kuphinda kuyise ku-0 emva kokuba igqibe umjikelo onexesha kwaye ibonisa isiphumo somzuzu omnye.
- counter timer: le ndawo yedatha ibuyisela ixesha langoku lekhawuntara, ngemizuzu. Ngokuqinisekileyo iya kubuyela ku-"0" xa ifikelela kwixabiso eliphezulu elibekiweyo
- Iseti yesibali-xesha sokubala: usebenzisa le ndawo yedatha ungaqwalasela ixesha lesibali-xesha setotali yesibini (ubuninzi bexabiso leseti), kwimizuzu. Eli xabiso ligcinwe kwimemori ye-Core IO
- ukusetha kwakhona ikhawuntara: usebenzisa le ngongoma yedatha unokuseta kwakhona ikhawuntari yethotali kwixabiso elithi "0" kwaye ikhawuntala enexesha iyakulahla ukubala ukuya kwelo nqanaba kumjikelo wexesha kwaye usete kwakhona isibali-xesha sayo ku-0. I-Core IO izakuseta kwakhona le ndawo yedatha ixabiso "0" xa umyalelo sele uphunyeziwe
UKUQWALASELWA KWESIXHOBO
IISETHINGI EZISISISIWE
Unxibelelwano lwe-RS485 Modbus Slave lunesetingi ezithile ezilungiswe ngolu hlobo lulandelayo -
- 8-bit ubude bedatha
- Yima kancinci
- Ukulingana NONE
I-DIP SWITCH ISETHINGI
Ukutshintsha kweDIP kusetyenziselwa ukuqwalasela ezinye iisetingi zeRS485 kunye nedilesi yekhoboka le-Modbus ngaloo ndlela -
- RS485 End-Of-Line (EOL) resistor
- RS485 abaxhathisi becala
- Idilesi yobukhoboka be-Modbus
- RS485 Baud-Inqanaba
Ibhanki yee-EOL ezimbini (i-End-Of-Line) iiswitshi ze-DIP eziluhlaza ziqwalaselwe ngolu hlobo lulandelayo -
Nceda ujonge inqaku lethu elisisiseko solwazi elinikezelweyo elifumanekayo webindawo http://know.innon.com apho sichaza ngokweenkcukacha ukusetyenziswa kokupheliswa kunye ne-bias resistors kwiinethiwekhi ze-RS485.
I-ID ye-Modbus kunye nokutshintsha kwe-DIP kwizinga le-baud ziqwalaselwe ngolu hlobo lulandelayo -
Idilesi yekhoboka useto lokutshintsha kweDIP luqhubekile.
IBluetooth kunye ne-Android App
I-Core IO ine-Bluetooth eyakhelwe-ngaphakathi evumela i-Core Settings app esebenza kwisixhobo se-Android ukuqwalasela izicwangciso ze-IP kunye ne-I / O.
Nceda ukhuphele usetyenziso kuGoogle Play - khangela "iisetingi eziphambili"
Khuphela kwaye ufake i-app, emva koko ujonge / wenze olu tshintsho lulandelayo-
- Vula useto lwefowuni yakho (tsalela ezantsi ukusuka phezulu, cofa i icon "cog"
- Cofa ku "Apps"
- Khetha usetyenziso lwe-"Core Settings".
- Cofa "Iimvume"
- Cinezela "iKhamera"-yisete ukuba "Vumela kuphela ngelixa usebenzisa i-app"
- Buyela emva emva koko ucinezele "Izixhobo ezikufutshane" - yibeke ku "Vumela"
Xa uqhuba usetyenziso, ikhamera iya kutshintsha, kwaye kuya kufuneka uyisebenzise ukufunda ikhowudi ye-QR kwimodyuli, onqwenela ukuseta, okt -
Isixhobo se-Android siya kukucela ukuba uvumele izixhobo zeBluetooth zibhanqa kuqhagamshelo lokuqala, zilumkele izaziso kwisixhobo sakho kwaye uzamkele.
Nje ukuba uqhagamshelwe, uya kuhlala kwi-I/O yokuseta isikrini, apho unokuseta i-I/O kwaye ufunde igalelo kunye nemveliso yamaxabiso angoku -
Sebenzisa iintolo zokuhla kwikholamu "I/O Mode" ukukhetha uhlobo longeniso ngokucofa iqhosha lerediyo elahlukileyo -
Nje ukuba wenze utshintsho okanye inani lotshintsho, iqhosha elithi "UPDATE" ezantsi ekunene liza kusuka kungwevu ukuya kumhlophe; cofa oku ukwenza utshintsho lwakho.
Cofa kwiqhosha elithi "ETHERNET" (ezantsi ekhohlo) ukuseta useto lwe-IP olufunekayo.
Seta kwaye wenze idatha ngokwendlela ye-I/O engentla.
Cofa kwiqhosha elithi "MODE" (ezantsi ekhohlo) ukuze ubuyele kwiisetingi ze-I/O.
Ethernet Port kunye Web Ulungelelwaniso lweseva (uguqulelo lwe-IP kuphela)
Kwiimodeli ze-IP ze-Core IO, i-socket ye-RJ45 eqhelekileyo iyafumaneka ukuze isetyenziswe:
- Unxibelelwano lwe-Modbus TCP (ikhoboka).
- Web ufikelelo kwiseva ukulungisa isixhobo
Iimodeli ze-IP zisabonelela ngokufikelela kwichweba le-RS485 le-Modbus RTU (ikhoboka) unxibelelwano kule mizekelo, ngoko umsebenzisi unokugqiba ukuba yeyiphi enye oyisebenzisayo ukuxhuma i-BEMS kwi-Core IO.
Izicwangciso ezingagqibekanga zezibuko le IP zezi:
| Idilesi yeIP: | 192.168.1.175 |
| Umnatha ongaphantsi: | 255.255.255.0 |
| Idilesi yesango: | 192.168.1.1 |
| Izibuko le-Modbus TCP: | 502 (elungisiwe) |
| izibuko leHTTP (webiseva): | 80 (elungisiwe) |
| Web umsebenzisi weseva: | i-animus (ilungisiwe) |
| Web Igama lokugqitha leseva: | I-HD1881 (ilungisiwe) |
Idilesi ye-IP, i-subnet, kunye nedilesi yesango inokutshintshwa kwi-app yeBluetooth ye-Android okanye kwi- web ujongano lomncedisi.
I web ujongano lomncedisi lujongeka kwaye lusebenza ngendlela efanayo ne-Core Settings app echazwe kwicandelo langaphambili.
ULUHLU NGENQAKU ZE-BEMS
Iintlobo zoBhaliso lwe-Modbus
Ngaphandle kokuba kuchazwe ngenye indlela kwiitheyibhile, zonke ii-I/O point values/statuss kunye nezicwangciso zibanjwa njenge-Holding Register ye-Modbus uhlobo lwedatha kwaye isebenzise irejista enye (16 bit) ukumela i-Integer (Int, uluhlu 0 - 65535) uhlobo lwedatha.
Iirejista zokubala i-Pulse count ziyi-32-bit ubude, iirejista ezingasayinwanga, okt iirejista ezimbini ezilandelelanayo ze-16-bit zidityanisiwe, kwaye i-byte order yazo ithunyelwa nge-endian encinci, okt -
- Umqhubi weNiagara/Sedona Modbus – 1032
- I-Teltonika RTU xxx - 3412 - iphinda isebenzise i-2 x "iRegister count / values" ukufumana zonke iibhithi ze-32
Kwezinye izixhobo ze-Modbus master, idesimali kunye needilesi zerejista ze-hex kwitheyibhile ziya kufuna ukuba zinyuswe ngo-1 ukuze kufundwe irejista echanekileyo (umz. Teltonika RTU xxx)
Uhlobo lwedatha yeBit-field lusebenzisa amasuntswana angama-16 akhoyo kwirejista yeModbus ukubonelela ngolwazi oluninzi lweBoolean ngokufunda okanye ukubhala irejista enye.
Iitafile zoBhaliso lwe-Modbus
Amanqaku Jikelele
| Idesimali | Hex | Igama | Iinkcukacha | Igciniwe | Uhlobo | Uluhlu |
| 3002 | BBA | Inguqulelo yeFirmware – iiyunithi | Uninzi lwamanani abalulekileyo kuguqulelo lwefirmware umz. 2.xx | EWE | R | 0-9 |
| 3003 | BBB | Uguqulelo lweFirmware-yeshumi | 2 Elona nani libalulekileyo le-firmware inguqulelo egx0x |
EWE | R | 0-9 |
| 3004 | BBC | Inguqulelo yeFirmware - hundredths | Okwesithathu Eyona nombolo ibalulekileyo ye-firmware inguqulelo egxx4 |
EWE | R | 0-9 |
Amanqaku oNgeniso lweDijithali
| Idesimali | Hex | Igama | Iinkcukacha | Igciniwe | Uhlobo | Uluhlu |
| 40 | 28 | DI 1 imowudi | Imowudi yoNgeniso lweDijithali khetha: 0 = Igalelo leDijithali ngokuthe ngqo 1 = Ungeniso lweDijithali umva 2 = Ukufakwa kwe-Pulse |
EWE | R/W | 0…2 |
| 41 | 29 | DI 2 imowudi | ||||
| 42 | 2A | DI 3 imowudi | ||||
| 43 | 2B | DI 4 imowudi | ||||
| 44 | 2C | DI 5 imowudi | ||||
| 45 | 2D | DI 6 imowudi | ||||
| 46 | 2E | DI 7 imowudi | ||||
| 47 | 2F | DI 8 imowudi | ||||
| 48 | 30 | DI 9 imowudi | ||||
| 49 | 31 | DI 10 imowudi | ||||
| 50 | 32 | DI 11 imowudi | ||||
| 51 | 33 | DI 12 imowudi | ||||
| 52 | 34 | DI 13 imowudi | ||||
| 53 | 35 | DI 14 imowudi | ||||
| 54 | 36 | DI 15 imowudi | ||||
| 55 | 37 | DI 16 imowudi | ||||
| 1 | 1 | ID 1 | Funda ubume boNgeniso lweDijithali (imowudi yongeniso yedijithali): 0 = ayisebenzi 1 = esebenzayo |
HAYI | HAYI | 0…1 |
| 2 | 2 | ID 2 | ||||
| 3 | 3 | ID 3 | ||||
| 4 | 4 | ID 4 | ||||
| 5 | 5 | ID 5 | ||||
| 6 | 6 | ID 6 | ||||
| 7 | 7 | ID 7 | ||||
| 8 | 8 | ID 8 | ||||
| 9 | 9 | ID 9 | ||||
| 10 | A | ID 10 | ||||
| 11 | B | ID 11 | ||||
| 12 | C | ID 12 | ||||
| 13 | D | ID 13 | ||||
| 14 | E | ID 14 | ||||
| 15 | F | ID 15 | ||||
| 16 | 10 | ID 16 |
| 1111 | 457 | DI 1-16 | Funda ubume begalelo ledijithali ngesuntswana (kuphela imowudi yongeniso yedijithali, bit 0 a. DI1) | HAYI | R | 0…1 |
| 100 | 64 | DI 1 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0.431496735 |
| 102 | 66 | Ikhawuntara ye-D11 (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0.4294967295 |
| 104 | 68 | DI 1 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe emva kokuba "i-counter timer iseti" ufike kwaye uqale kwakhona |
HAYI | R | 0…14400 |
| 105 | 69 | DI 1 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | GM | 0…14400 |
| 106 | 6A | DI 1 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 107 | 6B | DI 2 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0.429496735 |
| 109 | 6D | DI 2 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufaka ipuke) | HAYI | R | GA294967295 |
| 111 | 6 F | DI 2 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 112 | 70 | DI 2 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | GM | 0…14400 |
| 113 | 71 | DI 2 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 114 | 72 | Dl 3 counter (isithethi) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0..4294967295 |
| 116 | 74 | DI 3 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0..4294967295 |
| 118 | 76 | DI 3 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe emva kokuba "i-counter timer iseti" ufike kwaye uqale kwakhona |
HAYI | R | 0…14400 |
| 119 | 77 | DI 3 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 120 | 78 | DI 3 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 121 | 79 | DI 4 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufaka ipuke) | HAYI | R/W | 0..4294967295 |
| 123 | 7B | DI 4 counter (ixesha) | 32 bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yongeniso lwepulse) | HAYI | R | 0.A2949672:05 |
| 125 | 7D | DI 4 counter timer | Ukubaleka isibali-xesha kwimizuzu. Izakuseta kwakhona xa "ikhawuntala yesibali iseti" ufike kwaye uqale kwakhona |
HAYI | R | 0…14400 |
| 126 | 7E | DI 4 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | I-Ft/W | 0…14400 |
| 127 | 7 F | DI 4 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…111 |
| 128 | 80 | DI 5 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufaka ipuke) | HAYI | R/W | 0..4294967295 |
| 130 | 82 | DI 5 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0..4294967295 |
| 132 | 84 | Isibali-xesha sesaphulelo | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe emva kokuba "i-counter timer iseti" ufike kwaye uqale kwakhona |
HAYI | R | 0..14400 |
| 133 | 85 | DI 5 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 134 | 86 | Dl 5 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 135 | 87 | I-Dl 6 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufaka ipuke) | HAYI | R/W | 0..4294967295 |
| 137 | 89 | DI 6 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 139 | 8B | DI 6 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 140 | 8C | DI 6 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 141 | SD | DI 6 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 142 | 8E | DI 7 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 144 | 90 | DI 7 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (ukufakwa kwepulse indlela) |
HAYI | R | 0…4294967295 |
| 146 | 92 | DI 7 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 147 | 93 | DI 7 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 148 | 94 | DI 7 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 149 | 95 | DI 8 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 151 | 97 | DI 8 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 153 | 99 | DI 8 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziswe kanye 'i-counter timer iseti' ufike kwaye uqale kwakhona |
HAYI | R | 0…14400 |
| 154 | 9A | DI 8 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 155 | 9B | DI 8 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 156 | 9C | DI 9 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 158 | 9E | DI 9 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 160 | AO | DI 9 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 161 | Al | DI 9 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 162 | A2 | DI 9 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 163 | A3 | DI 10 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 165 | AS | DI 10 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 167 | A7 | DI 10 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 168 | A8 | DI 10 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 169 | A9 | DI 10 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 170 | AA | DI 11 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 172 | AC | DI 11 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 174 | AE | DI 11 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 175 | AF | 0111 isibali-xesha sekhawuntari iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 176 | BO | DI 11 counter reset | Ubume bexesha lexesha kwimizuzu | HAYI | R/W | 0…1 |
| 177 | B1 | DI 12 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 179 | 83 | DI 12 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 181 | 95 | DI 12 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 182 | B6 | DI 12 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 183 | B7 | DI 12 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 184 | B8 | DI 13 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 186 | BA | DI 13 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 188 | BC | DI 13 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 189 | BD | DI 13 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 190 | BE | DI 13 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 191 | BF | DI 14 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 193 | C1 | DI 14 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 195 | C3 | DI 14 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 196 | C4 | DI 14 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 197 | CS | DI 14 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "O" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 198 | C6 | DI 15 counter (itotaliza) | 32-bit ubude, ixabiso lilonke lokubala (itotaliza) (imowudi yokufaka ipulse) | HAYI | R/W | 0…4294967295 |
| 200 | C8 | DI 15 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 202 | CA | DI 15 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | R | 0…14400 |
| 203 | CB | DI 15 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 204 | CC | DI 15 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
| 205 | CD | DI 16 counter (itotaliza) | 32 bit ubude, ixabiso lilonke lokubala (totalizari) (imowudi yokufakwa kwepulse) | HAYI | R/W | 0…4294967295 |
| 207 | CF | 01 16 counter (ixesha) | I-32-bit ubude, ixabiso lekhawuntari yesibali-xesha esisebenzayo (imowudi yokufakwa kwepulse) | HAYI | R | 0…4294967295 |
| 209 | 1 | DI 16 counter timer | Ukubaleka isibali-xesha kwimizuzu. Iza kuphinda isetyenziselwe xa "icounter timer iseti" ifike kwaye iqale kwakhona | HAYI | ft | 0…14400 |
| 210 | 2 | DI 16 counter timer iseti | Ubume bexesha lexesha kwimizuzu | EWE | R/W | 0…14400 |
| 211 | 3 | DI 16 counter reset | Seta kwakhona umyalelo kuwo onke amaxabiso abalwayo (ibuyela ku "0" ngokuzenzekelayo) |
HAYI | R/W | 0…1 |
IIDATHA ZOBUGCISA
Imizobo
Iinkcukacha
| Ukunikezwa Amandla | 24 Vac + 10%/-15% 50 Hz, 24 Vdc + 10%/-15% |
| Umzobo wangoku - 70mA min, 80mA max | |
| Iingeniso zeDijithali | 16 x iiNgeniso zeDijithali (i-volt simahla) |
| I-DI ngqo, i-DI reverse, i-PULSE (ukuya kwi-100 Hz, i-50% yomjikelo womsebenzi, ubuninzi be-50-ohm yoqhagamshelwano) | |
| Ujongano kwi-BEMS | RS485, optoisolated, max 63 izixhobo ezixhaswa kwinethiwekhi |
| I-Ethernet/IP (uguqulelo lwe-IP) | |
| Iprotocol kwi-BEMS | I-Modbus RTU, izinga le-baud 9600 - 230400, i-8 bit, akukho mlinganiso, i-1 stop bit |
| I-Modbus TCP (uguqulelo lwe-IP) | |
| Ingress Protection Rating | IP20, EN 61326-1 |
| Ubushushu kunye ukufuma |
Ukusebenza: 0°C ukuya +50°C (32°F ukuya ku-122°F), max 95% RH (ngaphandle kokujiya) |
| Ugcino: -25°C ukuya +75°C (-13°F ukuya ku-167°F), max 95% RH (ngaphandle kokujiya) | |
| Izihlanganisi | I-Plug-in Terminals 1 x 2.5 mm2 |
| Ukunyuka | Iphaneli inyuswe (2x izibambi zesilayidi sokutyibilika ngasemva) / DIN ukunyuswa kukaloliwe |
Izikhokelo zokuLahla
- Isixhobo (okanye imveliso) kufuneka ilahlwe ngokwahlukileyo ngokungqinelana nomthetho wengingqi wokulahlwa kwenkunkuma osebenzayo.
- Musa ukulahla imveliso njengenkunkuma kamasipala; kufuneka ilahlwe kusetyenziswa amaziko akhethekileyo okulahla inkunkuma.
- Ukusetyenziswa ngokungafanelekanga okanye ukulahlwa ngendlela engafanelekanga kwemveliso kunokuchaphazela kakubi impilo yabantu kunye nokusingqongileyo.
- Kwimeko yokulahlwa kwenkunkuma yombane kunye neye-elektroniki ngokungekho mthethweni, izohlwayo zichazwe ngumthetho wendawo yokulahlwa kwenkunkuma.
1.0 4/10/2021
Fumana uncedo ku http://innon.com/support
Funda ngakumbi kwi http://know.innon.com
Amaxwebhu / Izibonelelo
 |
innon Core IO CR-IO-16DI 16 Point Modbus Igalelo okanye iModyuli yePhulo [pdf] Incwadi yokusebenzisa I-Core IO CR-IO-16DI, i-16 Point Modbus Igalelo okanye iModyuli yeMpahla, iNqaku IO CR-IO-16DI 16 Point Modbus Igalelo okanye iModyuli yePhulo, CR-IO-16DI, iModyuli yokuNgenisa okanye yePhulo |
