Core IO - CR-IO-16DI
Manual mai amfani
16 Point Modbus I/O Module, 16 DI
GABATARWA
Ƙarsheview
A cikin shigarwa da yawa, samun ingantaccen farashi, ƙarfi, da kayan aiki mai sauƙi ya zama maɓalli mai mahimmanci don cin nasarar aiki. Jigon Core yana ba da cikakkiyar mafita don saduwa da waɗannan sharuɗɗan. A cikin haɗin gwiwa tare da Atimus, kamfani da ke da ƙwarewa a fagen, kuma yana alfaharin gabatar da Core IO!
16DI yana ba da bayanai na dijital 16. Kazalika lura da lambobi marasa ƙarfi, na'urar kuma tana ba da damar amfani da ƙididdigar bugun jini.
Sadarwar BEMS ta dogara ne akan ingantaccen ingantaccen Modbus RTU akan RS485 ko Modbus TCP (samfurin IP kawai).
Ana iya samun daidaitawar na'urar ta hanyar hanyar sadarwa ta amfani da ko dai web dubawa (Sigar IP kawai) ko rajistar daidaitawar Modbus, ko ta amfani da na'urar Android da haɗawa ta Bluetooth ta amfani da ƙa'idar da aka keɓe.
Wannan samfurin Core IO
Dukansu CR-IO-16DI-RS da na'urorin CR-IO-16DI-IP sun zo tare da shigarwar dijital 8.
CR-IO-16DI-RS kawai ya zo tare da tashar RS485, yayin da CR-IO-16DI-IP ya zo tare da duka RS485 da tashoshin IP.
Duk samfuran biyu kuma suna zuwa tare da Bluetooth a cikin jirgi, don haka ana iya samun daidaitawa ta amfani da na'urar Android da ƙa'idar sadaukarwa.
Samfurin IP CR-IO-16DI-IP kuma ya haɗa a web Ƙirƙirar tsarin uwar garken, mai samun dama ta PC web mai bincike.
HARDWARE
Ƙarsheview
Wutar Wutar Lantarki
Abubuwan Shiga Dijital (DI)
Wayar da hanyar sadarwa ta RS485
Wasu hanyoyin haɗi masu amfani zuwa tushen ilimin mu website:
Yadda ake waya da hanyar sadarwa ta RS485
https://know.innon.com/howtowire-non-optoisolated
Yadda ake ƙarewa da son kai hanyar sadarwar RS485
https://know.innon.com/bias-termination-rs485-network
Da fatan za a lura - duka nau'ikan IP da RS na iya amfani da tashar RS485 don amsa wasiƙar Modbus master comms daga BEMS, amma babu sigar da za ta iya amfani da tashar RS485 don aiki azaman maigidan Modbus ko ƙofa.
Gaban LED Panel
Ana iya amfani da LEDs a gaban panel don samun ra'ayi kai tsaye game da matsayi na I / Os na Core IO da ƙarin bayani na gaba ɗaya.
A ƙasa akwai wasu teburi waɗanda zasu taimaka ƙaddamar da kowane hali na LED.
DI 1 zuwa 16
| Yanayin Shigar Dijital | Sharuɗɗa | Halin LED |
| Kai tsaye | Bude kewayawa Gajeren kewayawa |
KASHE KASHE KYAUTA |
| Juya baya | Bude kewayawa Gajeren kewayawa |
KYAUTA KASHE KASHE |
| Shigar da bugun jini | Karbar bugun bugun jini | LED yana haskakawa don kowane bugun jini |
BAS da RUN
| LED | Sharuɗɗa | Halin LED |
| GUDU | Core IO ba shi da iko Core IO yana aiki daidai |
KASHE KASHE KYAUTA |
| BAS | Ana karɓar bayanai Ana watsa bayanai Matsalar polarity bas |
LED kyaftawa ja LED ya haskaka blue LED ON J |
SANTA I/O
Abubuwan Shiga na Dijital
Abubuwan shigar da Dijital na iya samun lamba mai tsabta/kyautata volt da aka haɗa zuwa Core IO don karanta matsayinsa na buɗe/rufe.
Ana iya saita kowace shigarwar dijital ta zama ko dai:
- Shigarwar Dijital kai tsaye
- Juyawa Input Dijital
- Shigar da bugun jini
Yayin da yanayin "kai tsaye" da "reverse" zasu dawo da matsayi "Ƙarya (0)" ko "Gaskiya (1)" lokacin da lambar sadarwa ta kasance ko dai a buɗe ko rufe, yanayin na uku "shigarwar bugun jini" ana amfani da shi don dawo da counter. ƙimar tana ƙaruwa da raka'a 1 duk lokacin da shigarwar dijital ta rufe; da fatan za a karanta sashin da ke ƙasa don ƙarin cikakkun bayanai game da ƙididdigar bugun jini.
Ƙididdigar bugun jini
Ana iya daidaita abubuwan shigar da dijital da abubuwan da ake fitarwa na duniya musamman don yin aiki azaman abubuwan shigar da bugun bugun jini.
Matsakaicin mitar da ake iya karantawa shine 100Hz, tare da zagayowar aiki na 50%, kuma matsakaicin juriya na “rufe lamba” shine 50ohm.
Lokacin da aka saita shigarwa don ƙidaya bugun jini, ana samun adadin Modbus Rejista tare da bayanai da umarni musamman don aikin kirga bugun bugun.
Shigar da bugun bugun jini, a haƙiƙa, ƙidayar jimlar 2 kamar haka -
- Na farko yana ci gaba; zai ƙaru da raka'a ɗaya ga kowane bugun jini da aka karɓa kuma zai ci gaba da ƙirgawa har sai an aika umarnin sake saiti akan Modbus
- Sauran jimlar an tsara lokaci. Ainihin, zai kuma ƙaru da raka'a ɗaya don kowane bugun bugun jini da aka karɓa amma zai ƙidaya kawai don ƙayyadadden lokaci (daidaitacce) (a cikin mintuna). Lokacin da lokacin ya ƙare, Kowane shigarwar ƙidayar bugun bugun jini yana da rajistar Modbus masu zuwa masu alaƙa da shi -
- counter (totalizer): wannan shine babban jimla. Zai koma "0" kawai idan an aika umarnin sake saiti, ko kuma idan Core IO yana da keken keke - zaku iya rubuta zuwa wannan ƙimar don dawo da ƙidayar baya idan maye gurbin module ko sake saitawa zuwa 0
- counter (timer): wannan shine jimlar na biyu, wanda aka ƙayyade. Zai koma "0" duk lokacin da mai ƙidayar lokaci ya kai matsakaicin ƙimar saita (tare da jinkiri na minti 1), ko kuma idan Core IO yana da keken keke. Idan an kunna sake saitin na'urar, za a yi watsi da ƙidayar da ke cikin lokacin zagayowar kuma za a sake saita mai ƙididdigewa zuwa 0. Sake saitin ba zai sake saita wannan ƙidayar zuwa 0 ba bayan ya gama zagayowar lokaci kuma yana nuna sakamakon na minti 1.
- mai ƙidayar ƙidayar lokaci: wannan batu na bayanan yana dawo da lokaci na yanzu na counter, a cikin mintuna. Tabbas zai koma "0" lokacin da ya kai matsakaicin ƙimar da aka saita
- saitin mai ƙidayar ƙidayar lokaci: ta amfani da wannan bayanan za ku iya saita tsawon lokacin mai ƙididdigewa don jimla ta biyu (ƙimar saita ƙima), a cikin mintuna. Ana adana wannan ƙimar a cikin ƙwaƙwalwar Core IO
- counter reset: ta amfani da wannan data batu za ka iya sake saita totalizer counter zuwa darajar "0" da timemed counter zai watsar da kirga har zuwa wannan batu a cikin lokacin sake zagayowar kuma ya sake saita mai ƙidayar sa zuwa 0. Core IO zai sake saita wannan ma'anar bayanai da kansa zuwa. darajar "0" da zarar an aiwatar da umarnin
GABATAR DA NA'urar
GASKIYA SAITA
Sadarwar RS485 Modbus Slave tana da wasu saitunan da aka gyara kamar haka -
- Tsawon bayanan 8-bit
- 1 tasha bit
- Daidaiton BABU
DIP SWITCH SETTING
Ana amfani da maɓallan DIP don saita sauran saitunan RS485 da adireshin bawa na Modbus don haka -
- RS485 Ƙarshen-Layi (EOL) resistor
- RS485 Bias resistors
- Adireshin Bawa na Modbus
- RS485 Baud-Rate
An daidaita bankin EOL guda biyu (Ƙarshen-Layi) shuɗi na DIP masu sauyawa kamar haka -
Da fatan za a bincika labarin tushen ilimin sadaukarwar da ake samu a wurin website http://know.innon.com inda muka yi bayani dalla-dalla game da amfani da ƙarewa da masu tsattsauran ra'ayi akan hanyoyin sadarwar RS485.
Modbus ID da baud rate DIP an daidaita su kamar haka -
Adireshin bawa DIP saitunan canza sheka ya ci gaba.
Bluetooth da Android App
Core IO yana da ginanniyar Bluetooth wanda ke ba da damar Core Settings app da ke gudana akan na'urar Android don saita saitunan IP da I/O.
Da fatan za a zazzage ƙa'idar daga Google Play - bincika "Settings na ainihi"
Zazzage kuma shigar da app ɗin, sannan duba/yi canje-canjen saitunan masu zuwa -
- Bude saitunan wayarku (jawo ƙasa daga sama, danna alamar "cog")
- Danna "Apps"
- Zaɓi aikace-aikacen "Fara Saituna".
- Danna "Izini"
- Danna "Kyamara" - saita shi zuwa "Bada kawai yayin amfani da app"
- Komawa sannan danna "Na'urorin Kusa" - saita shi zuwa "Bada"
Lokacin da kuka kunna app ɗin, kyamarar zata kunna, kuma kuna buƙatar amfani da ita don karanta lambar QR akan tsarin, kuna son saitawa, watau -
Na'urar Android za ta nemi ka ba da damar na'urorin Bluetooth su haɗa a farkon haɗin gwiwa, kula da sanarwar da ke kan na'urarka kuma ka karɓi su.
Da zarar an haɗa, za ku sauka akan allon saitin I/O, inda zaku iya saita I/O da karanta shigarwa da fitar da ƙimar halin yanzu -
Yi amfani da kibiyoyi masu saukarwa a cikin shafi "I/O Mode" don zaɓar nau'in shigar da nau'in ta danna maɓallin rediyo -
Da zarar ka yi canji ko adadin canje-canje, maɓallin “UPDATE” a ƙasan dama zai fita daga launin toka zuwa fari; danna wannan don aiwatar da canje-canjenku.
Danna maɓallin "ETHERNET" (hagu na ƙasa) don saita saitunan IP da ake buƙata.
Saita kuma ƙaddamar da bayanai kamar ta hanyar I/O da ke sama.
Danna maɓallin "MODE" (hagu na ƙasa) don komawa zuwa saitunan I/O.
Ethernet Port da kuma Web Kanfigareshan Sabar (Sigar IP kawai)
Don samfuran IP na Core IO, daidaitaccen soket na RJ45 yana samuwa don amfani da su:
- Modbus TCP (bawa) sadarwa
- Web damar uwar garken don saita na'urar
Samfuran IP har yanzu suna ba da dama ga tashar tashar RS485 don sadarwar Modbus RTU (bawa) akan waɗannan samfuran, don haka mai amfani zai iya yanke shawarar wanda zai yi amfani da shi don haɗa BEMS zuwa Core IO.
Saitunan tsoho na tashar tashar IP sune:
| Adireshin IP: | 192.168.1.175 |
| Subnet: | 255.255.255.0 |
| Adireshin ƙofa: | 192.168.1.1 |
| Modbus TCP tashar jiragen ruwa: | 502 (kafaffen) |
| HTTP tashar jiragen ruwa (webuwar garken): | 80 (kafaffen) |
| Web mai amfani da uwar garken: | animus (kafaffen) |
| Web kalmar sirri ta uwar garken: | HD1881 (kafaffen) |
Ana iya canza adireshin IP, subnet, da adireshin ƙofa daga aikace-aikacen Android na Bluetooth ko daga na'urar web uwar garken dubawa.
The web dubawar uwar garken yana kallo kuma yana aiki daidai da ƙa'idar Saitunan Core da aka kwatanta a sashin da ya gabata.
BEMS POINT LISASKA
Nau'in Rijistar Modbus
Sai dai in an faɗi akasin haka a cikin allunan, duk ƙimar ƙimar I/O da saituna ana riƙe su azaman Riƙe Rajista Modbus nau'in bayanai kuma yi amfani da rajista ɗaya (16 bit) don wakiltar nau'in bayanai na Integer (Int, kewayon 0 - 65535).
Rijistar ƙidayar bugun jini tana da tsayi 32-bit, rajistar da ba a sanya hannu ba, watau rajista biyu a jere na 16-bit a hade, kuma ana aika odar su ta byte cikin ƙaramin endian, watau -
- Niagara/Sedona Modbus direba - 1032
- Teltonika RTU xxx - 3412 - kuma yi amfani da 2 x "ƙididdiga / dabi'u" don samun duk ragi 32
Ga wasu na'urori masu mahimmanci na Modbus, adiresoshin rajista na decimal da hex a cikin tebur za a buƙaci a ƙara su da 1 don karanta madaidaicin rajista (misali Teltonika RTU xxx)
Nau'in bayanan filin Bit-filin yana amfani da rago ɗaya daga ragi 16 da ake samu akan rijistar Modbus don samar da bayanan Boolean da yawa ta hanyar karantawa ko rubuta rajista ɗaya.
Modbus Rijista Tables
Babban Mahimmanci
| Decimal | Hex | Suna | Cikakkun bayanai | Ajiye | Nau'in | Rage |
| 3002 | BBA | Sigar firmware – raka'a | Yawancin lambobi masu mahimmanci don sigar firmware misali 2.xx | EE | R | 0-9 |
| 3003 | BBB | Sigar Firmware - kashi goma | 2 Mafi mahimmancin lamba don firmware sigar egx0x |
EE | R | 0-9 |
| 3004 | BBC | Sigar firmware - ɗari | 3rd Mafi mahimmancin lamba don firmware sigar misali xx4 |
EE | R | 0-9 |
Mahimman Shigar Dijital
| Decimal | Hex | Suna | Cikakkun bayanai | Ajiye | Nau'in | Rage |
| 40 | 28 | Yanayin DI 1 | Yanayin shigar da dijital zaɓi: 0 = Shigarwar Dijital kai tsaye 1 = Juyawa Input Dijital 2 = Shigar da bugun jini |
EE | R/W | 0…2 |
| 41 | 29 | Yanayin DI 2 | ||||
| 42 | 2A | Yanayin DI 3 | ||||
| 43 | 2B | Yanayin DI 4 | ||||
| 44 | 2C | Yanayin DI 5 | ||||
| 45 | 2D | Yanayin DI 6 | ||||
| 46 | 2E | Yanayin DI 7 | ||||
| 47 | 2F | Yanayin DI 8 | ||||
| 48 | 30 | Yanayin DI 9 | ||||
| 49 | 31 | Yanayin DI 10 | ||||
| 50 | 32 | Yanayin DI 11 | ||||
| 51 | 33 | Yanayin DI 12 | ||||
| 52 | 34 | Yanayin DI 13 | ||||
| 53 | 35 | Yanayin DI 14 | ||||
| 54 | 36 | Yanayin DI 15 | ||||
| 55 | 37 | Yanayin DI 16 | ||||
| 1 | 1 | Bayani na 1 | Karanta Halin Shigar Dijital (yanayin shigar da dijital): 0 = mara aiki 1 = aiki |
A'A | A'A | 0…1 |
| 2 | 2 | Bayani na 2 | ||||
| 3 | 3 | Bayani na 3 | ||||
| 4 | 4 | Bayani na 4 | ||||
| 5 | 5 | Bayani na 5 | ||||
| 6 | 6 | Bayani na 6 | ||||
| 7 | 7 | Bayani na 7 | ||||
| 8 | 8 | Bayani na 8 | ||||
| 9 | 9 | Bayani na 9 | ||||
| 10 | A | Bayani na 10 | ||||
| 11 | B | Bayani na 11 | ||||
| 12 | C | Bayani na 12 | ||||
| 13 | D | Bayani na 13 | ||||
| 14 | E | Bayani na 14 | ||||
| 15 | F | Bayani na 15 | ||||
| 16 | 10 | Bayani na 16 |
| 1111 | 457 | DI 1-16 | Karanta halin shigarwa na dijital ta bit (yanayin shigar dijital kawai, bit 0 a. DI1) | A'A | R | 0…1 |
| 100 | 64 | DI 1 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0.431496735 |
| 102 | 66 | D11 mai ƙidayar lokaci | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0.4294967295 |
| 104 | 68 | DI 1 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za a sake saitawa sau ɗaya “saitin mai ƙidayar lokaci” isa ya fara sake |
A'A | R | 0…14400 |
| 105 | 69 | DI 1 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | GM | 0…14400 |
| 106 | 6A | DI 1 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 107 | 6B | DI 2 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0.429496735 |
| 109 | 6D | DI 2 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar da puke) | A'A | R | GA294967295 |
| 111 | 6 F | DI 2 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 112 | 70 | DI 2 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | GM | 0…14400 |
| 113 | 71 | DI 2 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 114 | 72 | DL 3 counter (mai magana) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0..4294967295 |
| 116 | 74 | DI 3 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0..4294967295 |
| 118 | 76 | DI 3 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za a sake saitawa sau ɗaya “saitin mai ƙidayar lokaci” isa ya fara sake |
A'A | R | 0…14400 |
| 119 | 77 | DI 3 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 120 | 78 | DI 3 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 121 | 79 | DI 4 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigarwar puke) | A'A | R/W | 0..4294967295 |
| 123 | 7B | DI 4 counter (lokacin lokaci) | Tsawon bit 32, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0.A2949672:05 |
| 125 | 7D | DI 4 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za a sake saitawa da zarar "an saita mai ƙidayar lokaci" isa ya fara sake |
A'A | R | 0…14400 |
| 126 | 7E | DI 4 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | Ft/W | 0…14400 |
| 127 | 7 F | DI 4 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…111 |
| 128 | 80 | DI 5 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigarwar puke) | A'A | R/W | 0..4294967295 |
| 130 | 82 | DI 5 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0..4294967295 |
| 132 | 84 | Mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za a sake saitawa sau ɗaya “saitin mai ƙidayar lokaci” isa ya fara sake |
A'A | R | 0..14400 |
| 133 | 85 | DI 5 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 134 | 86 | DL 5 sake saitin counter | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 135 | 87 | DL 6 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigarwar puke) | A'A | R/W | 0..4294967295 |
| 137 | 89 | DI 6 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 139 | 8B | DI 6 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 140 | 8C | DI 6 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 141 | SD | DI 6 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 142 | 8E | DI 7 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 144 | 90 | DI 7 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (shigarwar bugun jini yanayin) |
A'A | R | 0…4294967295 |
| 146 | 92 | DI 7 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 147 | 93 | DI 7 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 148 | 94 | DI 7 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 149 | 95 | DI 8 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 151 | 97 | DI 8 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 153 | 99 | DI 8 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za a sake saitawa sau ɗaya 'counter time set' isa ya fara sake |
A'A | R | 0…14400 |
| 154 | 9A | DI 8 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 155 | 9B | DI 8 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 156 | 9C | DI 9 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 158 | 9E | DI 9 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 160 | AO | DI 9 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 161 | Al | DI 9 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 162 | A2 | DI 9 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 163 | A3 | DI 10 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 165 | AS | DI 10 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 167 | A7 | DI 10 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 168 | A8 | DI 10 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 169 | A9 | DI 10 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 170 | AA | DI 11 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 172 | AC | DI 11 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 174 | AE | DI 11 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 175 | AF | 0111 saiti mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 176 | BO | DI 11 counter sake saiti | Tsawon lokacin ƙidayar lokaci a cikin mintuna | A'A | R/W | 0…1 |
| 177 | B1 | DI 12 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 179 | 83 | DI 12 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 181 | 95 | DI 12 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 182 | B6 | DI 12 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 183 | B7 | DI 12 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 184 | B8 | DI 13 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 186 | BA | DI 13 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 188 | BC | DI 13 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 189 | BD | DI 13 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 190 | BE | DI 13 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 191 | BF | DI 14 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 193 | C1 | DI 14 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 195 | C3 | DI 14 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 196 | C4 | DI 14 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 197 | CS | DI 14 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "O" ta atomatik) |
A'A | R/W | 0…1 |
| 198 | C6 | DI 15 counter (totalizer) | Tsawon 32-bit, jimlar ƙimar ƙima (abin da aka haɗa) (Yanayin shigar da bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 200 | C8 | DI 15 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 202 | CA | DI 15 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | R | 0…14400 |
| 203 | CB | DI 15 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 204 | CC | DI 15 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
| 205 | CD | DI 16 counter (totalizer) | Tsawon bit 32, jimlar ƙima mai ƙima (Totalizer) (yanayin shigar bugun bugun jini) | A'A | R/W | 0…4294967295 |
| 207 | CF | 01 16 counter (lokacin lokaci) | Tsawon 32-bit, ƙimar ƙima don mai ƙidayar lokaci (yanayin shigar bugun bugun jini) | A'A | R | 0…4294967295 |
| 209 | 1 | DI 16 mai ƙidayar lokaci | Mai ƙidayar lokaci a cikin mintuna. Za'a sake saitawa da zarar an isa "an saita mai ƙidayar lokaci" kuma a sake farawa | A'A | ft | 0…14400 |
| 210 | 2 | DI 16 saitin mai ƙidayar lokaci | Tsawon lokacin ƙidayar lokaci a cikin mintuna | EE | R/W | 0…14400 |
| 211 | 3 | DI 16 counter sake saiti | Sake saita umarni zuwa duk ƙididdiga masu ƙididdiga (yana komawa zuwa "0" ta atomatik) |
A'A | R/W | 0…1 |
DATA FASAHA
Zane
Ƙayyadaddun bayanai
| Tushen wutan lantarki | 24Vac +10%/-15% 50 Hz, 24Vdc +10%/-15% |
| Zane na yanzu - 70mA min, 80mA max | |
| Abubuwan Shiga na Dijital | 16 x Abubuwan shigarwa na dijital (kyautata volt) |
| DI kai tsaye, DI baya, PULSE (har zuwa 100 Hz, 50% sake zagayowar aiki, max 50-ohm lamba) | |
| Interface zuwa BEMS | RS485, warewa, max 63 na'urori masu goyan bayan hanyar sadarwa |
| Ethernet/IP (Sigar IP) | |
| Protocol zuwa BEMS | Modbus RTU, baud rate 9600 - 230400, 8 bit, babu daidaito, 1 tasha bit |
| Modbus TCP (Sigar IP) | |
| Ƙididdiga Kariya | Saukewa: EN 20-61326 |
| Zazzabi kuma zafi |
Aiki: 0°C zuwa +50°C (32°F zuwa 122°F), max 95% RH (ba tare da tari ba) |
| Adana: -25°C zuwa +75°C (-13°F zuwa 167°F), max 95% RH (ba tare da tari ba) | |
| Masu haɗawa | Wuraren toshewa 1 x 2.5 mm2 |
| Yin hawa | Panel wanda aka ɗora (2x masu riƙe dunƙule masu zamewa a kan baya) / DIN dogo hawa |
Sharuɗɗan don zubarwa
- Dole ne a zubar da kayan (ko samfurin) dabam bisa ga dokar zubar da shara ta gida da ke aiki.
- Kada a zubar da samfurin azaman sharar gida; dole ne a zubar da shi ta hanyar kwararrun cibiyoyin zubar da shara.
- Amfani mara kyau ko zubar da samfur ba daidai ba na iya cutar da lafiyar ɗan adam da muhalli mara kyau.
- Idan aka yi watsi da sharar lantarki da na lantarki ba bisa ka'ida ba, an ayyana hukuncin ta hanyar dokar zubar da shara ta gida.
1.0 4/10/2021
Nemo taimako a http://innon.com/support
Ƙara koyo a http://know.innon.com
Takardu / Albarkatu
 |
Innon Core IO CR-IO-16DI 16 Point Modbus Input ko Fitar Module [pdf] Manual mai amfani Core IO CR-IO-16DI, 16 Point Modbus Input ko Fitar Module, Core IO CR-IO-16DI 16 Point Modbus Input ko Fitar Module, CR-IO-16DI, Input ko Fitar Module |
