Imephu yokuFakelo
Umxholo weKit:
| 1. Yongeza-kwibhodi 2. Isinki yobushushu 3. Iadaptha ye-USB (Uhlobo oluncinci A) 4. Isithuba eside (x4) |
5. Ukuma okufutshane (x4) 6. Izikrufu (x2) 7. Indawo ebiyelweyo 8. Iseli yeqhosha, CR2032 |
Izinto ezongezelelweyo ezifunekayo:
| 1. RaspberryPi 3or2 2. Ikhadi le-SD elilungiselelwe kwangaphambili 3. Ubonelelo ngoMbane (5V@2.5A) 4. mSATASSD, max.up to1TBor USBFlash Drive (Ngokuzithandela) |
5. HDMI Monitor 6. Imodyuli yekhamera (Ngokuzikhethela) 7. Intambo yeHDMI 8. Ikhibhodi ye-USB kunye neMouse |
Imiyalelo yeNdibano:
- Susa ifilimu ekhuselayo ukusuka ngaphantsi kwesitya sokushisa kwaye uyibeke phezulu kwiProsesa kwiRaspberry Pi.
- Faka ikhadi le-SD elicwangcisiweyo kwangaphambili kwi-Raspberry Pi SD khadi slot. Awunayo? Khuphela iRasbianJessie yamva nje ngePIXELUmfanekiso kwikhonkco elingezantsi kwaye ubhalele kwikhadi leMicroSD usebenzisa umbhali wemifanekiso okhethiweyo (isixhobo esicetyiswayo Win32DiskImager). https://www.raspberrypi.org/downloads/
- (Ngokuzikhethela) - Qhagamshela iPi Camera kwi-port yekhamera kwi-Raspberry Pi.
- Nyuka iRaspberry Pi kwindawo ebiyelweyo usebenzisa izikhewu ezine ezinde. Nceda uqiniseke ukuba uqhelaniso lweRaspberry Pi luchanekile ngokwezihlanganisi kwiRaspberry Pi kunye neendawo zokubeka kwindawo ebiyelweyo.
- Ngoku beka ikhamera kwikhamera yokungena kwindawo ebiyelweyo (kuphela ukuba unekhamera)
- Faka iseli yeqhosha ngasemva kwibhodi yokongeza.
- Mounttheadd-onboard phezu kweRaspberryPi 40pinGPIOandfastente ibhodi ukuya kwiRaspberry Pi usebenzisa izikrufu ezine ezinikiweyo.
- (Ngokhetho Kuphela ukuba ufuna ukufakela i-SSDukuqalisa kunye nokugcinwa)-Qhagamshela i-SSD kwisidibanisi se-mSATA kwaye unyuse esinye isiphelo usebenzisa izikrufu ezibini ezinikiweyo.
- Ekugqibeleni faka i-flap ephezulu ye-enclosure, lungelelanisa iqhosha lamandla e-flap ngqo phezulu kwi-switch / iqhosha kwibhodi yokongeza kwaye ucinezele i-flap uya kuva izandi ze-clink kwaye uqinisekise ukuba ivalwe kakuhle (Qinisekisa ukuba zonke izinto zixhunyiwe ngokufanelekileyo. kwaye iqiniswe ngokufanelekileyo akukho ziqhagamshelo ezikhululekileyo okanye izikrufu).
- Qhagamshela iadaptha ye-USB enikiweyo ngaphandle (Uhlobo A ukuya kwi-USB encinci) kwi-Raspberry Pi USB port i-micro USB port ephawulwe ngophawu (
). - (Ngokhetho Kuphela ukuba ufuna ukusebenzisa i-USB Flash Drive ukuze uqalise kunye nokugcinwa) Faka i-USB flash drive kwenye ye-Raspberry Pi USB port.
- Ngoku ulungele ukunika amandla i-Pi Desktop yakho.
Phawula: Soloko uqinisekisa ukuba isoftware yakho isexesheni ngokudibanisa iPi yakho kwi-intanethi, uvule i-terminal, kunye nokusebenza: sudo apt-fumana uhlaziyo sudo apt-fumana uphuculo
Ukuqala i-Pi Desktop yakho:
- Qhagamshela iRaspberry Pi Desktop yakho kwimonitha yeHDMI usebenzisa intambo yeHDMI.
- Qhagamshela ikhibhodi ye-USB kunye nempuku kwi-Pi Desktop USB port.
- Qhagamshela unikezelo lombane lwe-USB (ecetyiswayo 5V@2.5A) kwizibuko lombane le-USB elincinci eliphawulwe nge-PWR kwaye uvule unikezelo.
- Ngoku cofa iqhosha lamandla kwiPiDesktop ( ) kwaye ulinde inkqubo ukuba iqale.
- Ngoku ukulungele ukusebenzisa i-Pi Desktop.
- Amanyathelo awongezelelweyo (Ngokhetho) Kuphela ukuba usebenzisa i-SSD drive okanye i-USB flash drive kwaye ufuna i-Pi Desktop iqale kwi-SSD okanye i-USB drive endaweni yekhadi le-microSD landela le miyalelo ingezantsi.
a. Qhagamshela kwi-intanethi usebenzisa i-Ethernet okanye inethiwekhi ye-WiFi.
b. Vula isikhangeli sakho kwaye uye kwi www.element14.com/PiDesktop , phantsi kwecandelo lokukhuphela khuphela igama lephakheji "pidesktop.deb".
c. Ngoku vula ifestile yeTheminali kwaye uye kulawulo olukhutshelweyo file “pidesktop.deb” ukuya.
d. Faka iphakheji kwaye udibanise i-USD kwi-SSD okanye kwi-USB drive ngokusebenzisa le miyalelo ilandelayo: $ sudo dpkg -i pidektop.deb
e. (Ngokhetho) Clone fileinkqubo ukusuka Raspberry Pi micro SD Card ukuya SSD okanye USB flash Drive $sudoppp-hdclone
Kweli nyathelo, uya kucelwa ukuba ukhethe i-SSDorUSBdrive, khetha i-SSD eqhagamshelweyo okanye i-USB drive kwaye ucofe u-“Qala”. Nje ukuba igqityiwe, qalisa kwakhona inkqubo yakho. - Ngoku ukulungele ukuqala kwi-SSD yakho okanye kwi-USB drive.
Ngolwazi oluthe kratya, nceda undwendwele: www.element14.com/piDesktop
Yenziwe kwi-PRC.
Pn# PIDESK, DIYPI Desktop
Umenzi: element14, Canal Road. IiLeeds. e-UK. LS12 2TU
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
- esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
- Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.
Phawula: Esi sixhobo sivavanyiwe saza safunyanwa ukuba sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba uphazamiseko aluyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngomyinge omnye okanye ngaphezulu kwezi zilandelayo:
- Jongisa kwakhona okanye uhambise i-eriyali efumanayo
- Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli
- Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
- Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.
Amaxwebhu / Izibonelelo
 |
element14 DIY Pi Desktop Computer Kit for Raspberry Pi [pdf] Incwadi Yomyalelo DIY Pi Desktop Computer Kit for Raspberry Pi |
