SILICON LABS ETRX3587 Fokotsa Nako ea Tsoelo-pele ea IoT

TelegesisTM ETRX358x le ETRX358xHR

Litlhaloso

• Lebitso la Sehlahisoa: TelegesisTM ETRX358x le ETRX358xHR
• Nomoro ea mohlala: ETRX358x
• Moetsi: Silicon Laboratories Inc.
• Protocol e se nang mohala: IEEE 802.15.4 ZigBee
• Phepelo ea motlakase: DC
• Litekanyo: Sheba karolo ea Physical Dimensions

Tlhaloso ea Sehlahisoa:

The TelegesisTM ETRX358x le ETRX358xHR ke li-modules tse se nang mohala tse etselitsoeng ho sebelisoa lits'ebetsong tse hlokang IEEE 802.15.4 puisano ea ZigBee. Li-module li tla le likarolo tse fapaneng tsa Hardware le firmware ho etsa hore ho be bonolo ho kopanya lits'ebetsong tse fapaneng.

Litaelo tsa Tšebeliso ea Sehlahisoa:

1. Tlhaloso ea Hardware:
   Thepa ea module ea ETRX358x e kenyelletsa likhokahano tse fapaneng bakeng sa khokahano. Sheba karolo ea Tlhaloso ea Hardware bukeng ea litaelo bakeng sa lintlha tse qaqileng ka likarolo tsa hardware.
2. Tlhaloso ea Firmware:
   Firmware ea module ea ETRX358x e lumella litlhophiso tsa token mme e ts'ehetsa litlhophiso tsa firmware tse tloaelehileng. Latela litaelo tse fanoeng karolong ea Tlhaloso ea Firmware bakeng sa ho theha le ho iketsetsa firmware.
3. Module Pinout
   Sheba karolo ea Module Pinout ho utloisisa tlhophiso ea pin ea module ea ETRX358x bakeng sa khokahanyo e nepahetseng.
4. Litlhaloso tsa Digital I/O:
   Bakeng sa tlhahisoleseling mabapi le lintlha tsa tlhahiso ea dijithale / tlhahiso, sheba karolo ea Digital I/O Specifications bukeng ea tataiso ho netefatsa hore e lumellana le lisebelisoa tsa kantle.
5. Litlhophiso tsa Matla:
   Fetola litšobotsi tsa motlakase tsa TX le litlhophiso tsa motlakase ho latela litataiso tsa Melao ea Molao tse boletsoeng bukeng ea tataiso ho fihlela litlhoko tsa molao.

Lipotso Tse Botsoang Khafetsa (FAQ):

• Q: Ke maemo afe a khothaletsoang a ts'ebetso bakeng sa mojule oa ETRX358x?
  A: Maemo a khothaletsoang a ts'ebetso a hlalositsoe ka botlalo bukeng ea litaelo tlasa karolo ea Absolute Maximum Ratings le Recommended Operating Conditions.
• P: Nka etsa bonnete ba hore FCC ea latela melao ha ke sebelisa module ea ETRX358x?
  A: Ho netefatsa hore FCC e ea latela melao, latela Litlhoko tsa ho Laela tsa FCC tse hlalositsoeng karolong ea Litumello tsa Sehlahisoa bukeng ea litaelo.

Setšoantšo ha se bontšoe boholo ba 'nete; atolosoa ho bontsha dintlha.

The Telegesis ETRX358x le ETRX358xHR series modules ke kemiso e nyenyane, matla a tlaase a 2.4GHz ZigBee modules, e thehiloeng ho Silicon Labs EM358x ea morao-rao ea lelapa la single chip ZigBee®.
Li-module tsena tsa moloko oa 4 li etselitsoe hore li hokahane le sesebelisoa leha e le sefe ntle le tlhoko ea boiphihlelo le boiphihlelo ba RF. U sebelisa sethala sa 'maraka sa EmberZNet ZigBee®, letoto la ETRX358x le u thusa ho eketsa bokhoni bo matla ba marang-rang a marang-rang lihlahisoa tsa hau le ho li tlisa' marakeng kapele.
Bakeng sa nts'etsopele ea ts'ebeliso ea tloaelo letoto la ETRX358x le hokahana habonolo tikolohong ea nts'etsopele ea Ember Desktop.

Likarolo tsa Module

• Ntho e nyane ea sebopeho, mojule oa SMT 25mm x 19mm
• Mokhoa o ts'oanang oa maoto le ho tsoa joalo ka ETRX357
• Side Castellations bakeng sa ho soasoa habonolo le tlhahlobo ea mahlo
• Likhetho tse peli tsa antenna: Antenna ea chip e kopantsoeng kapa sehokelo sa U.FL coaxial
• E ipapisitse le 32-bit ARM® Cortex-M3
• Ts'ebetso ho 6, 12 kapa 24MHz
• Tekanyetso ea indasteri ea JTAG Lenaneo le ts'ebetso ea nako ea 'nete ea pakete ka Ember Debug Port
• Ho fihla ho 512kB ea flash le 64kbytes ea RAM
• Boroko bo Tebileng bo tlase ka ho Fetisisa ba 1µA e nang le RAM e bolokiloeng le GPIO le mekhoa e mengata ea ho robala.
• Phapang e pharaletseng voltagmefuta e fapaneng (2.1 ho 3.6V)
• kristale ea boikhethelo ea 32.768kHz e ka eketsoa kantle
• E ka sebetsa joalo ka sesebelisoa sa ho qetela, router kapa mohokahanyi
• Mehala ea 24 ea sepheo se akaretsang sa I/O e kenyelletsang lintlha tsa analogue (li-GPIO tsohle tsa EM358x SoC lia fumaneha)
• Lintlafatso tsa Firmware ka serial port kapa moeeng li sebelisa Ember standalone bootloader
• Kholiso e tšehelitsoeng ka Hardware (AES-128)
• CE le UKCA; Tumellano ea FCC le IC, tumello ea modular ea FCC
• Boemo ba mocheso oa ho sebetsa: -40°C ho ea ho +85°C
• Mofuta o molelele o nang le tekanyetso ea khokahano ea ho fihla ho 124dB e fumanehang ka mokhoa o ts'oanang

Likarolo tsa seea-le-moea

• E thehiloe ho Silicon Labs EM358x lelapa la chip e le 'ngoe ZigBee® SoCs
• Sehlopha sa ISM sa 2.4GHz
• 250kbit/s ho feta tekanyo ea data ea moea
• Likanale tse 16 (IEEE802.15.4 Channel 11 to 26)
• + 3dBm matla a tsoang (+8dBm ka mokhoa oa boost)
• Kutlo e phahameng ea -100dBm (-102dBm ka mokhoa oa boost) hangata @ 1% sekhahla sa phoso ea pakete
• RX Hajoale: 27mA, TX Hajoale: 32mA ho 3dBm
• Khokahano e matla ea Wi-Fi le Bluetooth

Likopo tse sisintsoeng

• Lisebelisoa tsa ZigBee Smart Energy
• Lialamo tse se nang mohala le Tšireletso
• Lehae/Moaho oa Boiketsetso
• Wireless Sensor Networks
• Taolo ea Liindasteri ea M2M
• Taolo ea mabone le moea
• Tlhokomelo e hole
• Tlhokomelo le taolo ea tikoloho

Ntlafatso Kit

• ETRX3587 Expansion Pack bakeng sa ETRX357 Development Kit
• ETRX357 Development Kit e nang le tsohle tse hlokahalang ho theha marang-rang a marang-rang kapele le ho lekola mefuta le ts'ebetso ea letoto la ETRX357 le mofuta oa eona oa nako e telele.
• Ntlafatso ea software e ikhethileng e fumaneha ha o e kopa.

Selelekela

Tokomane ena e hlalosa Telegesis ETRX358x le ETRX358xHR lelapa la li-module tsa ZigBee tse etselitsoeng ho kopanngoa habonolo ho sesebelisoa se seng le ho fana ka sebopeho sa marang-rang se potlakileng, se bonolo le se theko e tlaase.
Li-module tsa letoto la Telegesis ETRX3 li thehiloe sethaleng se lumellanang le Silicon Labs ZigBee se nang le lelapa le le leng la chip ea EM358x SoCs hammoho le ZigBee PRO e lumellanang le EmberZNet meshing stack. Li-module tsa ETRX358x le ETRX358xHR li emela sethala se loketseng bakeng sa nts'etsopele ea firmware ea moetlo mmoho le lisebelisoa tsa ntlafatso tsa Silicon Labs ZigBee.
Ha ho na boiphihlelo kapa boiphihlelo ba RF bo hlokehang ho eketsa bokhoni bona ba marang-rang ba waelese lihlahisoa tsa hau. Letoto la li-module tsa ETRX358x le ETRX358xHR li fana ka menyetla ea ho kopanya kapele le nako e khuts'oane ea ho bapatsa sehlahisoa sa hau.

Tlhaloso ea Hardware
Mehaho ea mantlha ea li-module tsa ETRX358x le ETRX358xHR ke chip e le 'ngoe EM358x SoC e tsoang ho Silicon Labs, kristale ea 24MHz ea referense le potoloho e ka pele ea RF e ntlafalitsoeng bakeng sa ts'ebetso e ntle ea RF. Li-module li fumaneha ka antenna e ka holim'a board kapa ka tsela e 'ngoe sehokelo sa U.FL sa coaxial bakeng sa ho hokela manakana a kantle. Limojule tse nang le sehokelo sa U.FL li khetholloa ka sehlomathi sa "HR".
Antenna e kopantsoeng ke Antenova Rufa, 'me lintlha tsa mohlala oa mahlaseli li fumaneha ho tloha Antenova websebaka [5].

Mojule	Chip	Khanya	RAM	Antenna	USB
ETRX35811	EM3581	256kB	32kB	Chip	Che
ETRX3581HR1	EM3581	256kB	32kB	Kantle	Che
ETRX35821	EM3582	256kB	32kB	Chip	Ee
ETRX3582HR1	EM3582	256kB	32kB	Kantle	Ee
ETRX35851	EM3585	512kB	32kB	Chip	Che
ETRX3585HR1	EM3585	512kB	32kB	Kantle	Che
ETRX35861	EM3586	512kB	32kB	Chip	Ee
ETRX3586HR1	EM3586	512kB	32kB	Kantle	Ee
ETRX3587	EM3587	512kB	64kB	Chip	Che
Setšoantšo sa ETRX3587HR	EM3587	512kB	64kB	Kantle	Che
ETRX35881	EM3588	512kB	64kB	Chip	Ee
ETRX3588HR1	EM3588	512kB	64kB	Kantle	Ee

Lethathamo la 1: Liphetoho tsa Mojule

ETRX358x le ETRX358xHR li sebelisetsoa ZigBee (www.zigbee.org) lits'ebetso. Haeba ho ka lakatsoa ho theha firmware ea tloaelo, sesebelisoa sa Silicon Labs, se nang le Ember Desktop hammoho le tikoloho ea ntlafatso e kopaneng (IDE), ea hlokahala.

Litumello tsa Sehlahisoa

ETRX358x le ETRX358xHR li etselitsoe ho kopana le melaoana eohle ea naha bakeng sa ts'ebeliso ea lefats'e ka bophara. Haholo-holo ho fumanoe litifikeiti tse latelang:

Litumello tsa FCC
The Telegesis ETRX358x lelapa le kopantseng Antenna hammoho le lelapa la ETRX358xHR ho kenyelletsa le li-antenna tse thathamisitsoeng ho Lethathamo la 2 le matla a matla a thathamisitsoeng karolong ea 10.2 a lekoa ho lumellana le FCC CFR Karolo ea 15 (USA) Lisebelisoa li finyella litlhoko tsa tumello ea modular transmitter e le ka botlalo tsebisong ea sechaba ea FCC DA00.1407.transmitter.

Polelo ea FCC:
Sesebelisoa sena se lumellana le Karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.

FCC IDTlhaloso: S4GEM358X
Mojule ona o amohetsoe ho sebelisoa lits'ebetsong tse nkehang habonolo le tsa mehala. Mojule le antenna e amanang le eona li tlameha ho kengoa ho fana ka sebaka sa karohano sa bonyane 0.75cm ho tloha ho batho bohle mme ha ea lokela ho fetisoa ka nako e le 'ngoe le e 'ngoe ea antenna kapa transmitter.

Ntho	Karolo No.	Moetsi	Mofuta	Tšitiso	Fumana
1	BT-Stubby (e otlolohileng)	EAD Ltd. [6]	¼ Leqhubu	50Ω	0dBi
2	BT-Stubby (ka ho le letona)	EAD Ltd. [6]	¼ Leqhubu	50Ω	0dBi
3	CJ-2400-6603	Chang Jia	½ Leqhubu	50 Ω	2.0dBi
4	Rufa (ka sekepeng)	Antenova	Chip	50Ω	2.1dBi (tlhōrō)

Letlapa la 2: Manakana a amohetsoeng

Le ha mokopi oa sesebelisoa seo ho sona ETRX358x kapa ETRX358xHR e nang le antenna e thathamisitsoeng ho Lethathamo la 2 e kentsoe ha a hlokehe ho fumana tumello e ncha bakeng sa mojule, sena ha se thibele monyetla oa hore ho ka hlokahala mofuta o mong oa tumello kapa tlhahlobo. bakeng sa sehlahisoa ho latela melao ea sebaka sa lehae.
FCC e hloka hore mosebelisi a tsebisoe hore liphetoho leha e le life kapa liphetoho tse entsoeng sesebelisoa sena tse sa amohetsoeng ka ho toba ke Telegesis (UK) Ltd. li ka senya matla a mosebedisi a ho sebelisa thepa.
Ha o sebelisa lelapa la ETRX358xHR le nang le li-antennae tse amohetsoeng, ho hlokahala ho thibela basebelisi ba ho qetela ho li nkela ka tse sa lumelloeng.

• Litlhoko tsa ho ngola tsa FCC
  Ha o kopanya malapa a ETRX358x kapa ETRX358xHR ho sehlahisoa ho tlameha ho netefatsoa hore litlhoko tsa ho ngola tsa FCC lia fihlelleha. Sena se kenyelletsa leibole e bonahalang ka ho hlaka ka ntle ho sehlahisoa se felileng se hlalosang sekhetho sa Telegesis FCC (ID ya FCC: S4GEM358X) hammoho le tsebiso ea FCC e bontšitsoeng leqepheng le fetileng. Leibole ena e kantle e ka sebelisa mantsoe a kang "E na le Transmitter Module FCC ID: S4GEM358X" kapa "E na le ID ea FCC: S4GEM358X" leha ho ka sebelisoa mantsoe afe kapa afe a tšoanang a hlalosang moelelo o tšoanang.
• Litumello tsa IC (Industry Canada).
  Lelapa la Telegesis ETRX358x le nang le Antenna e kopantsoeng hammoho le lelapa la ETRX358xHR li amohetsoe ke Industry Canada ho sebetsa ka mefuta ea li-antenna tse thathamisitsoeng ho Lethathamo la 2 ka phaello e phahameng e lumelletsoeng le ho hlokeha ha antenna bakeng sa mofuta o mong le o mong oa antenna o bontšitsoeng. Mefuta ea li-antenna e sa kenyelletsoeng lethathamong lena, e nang le phaello e fetang palo e kholo e bontšitsoeng bakeng sa mofuta oo, e thibetsoe ka thata ho sebelisoa le sesebelisoa sena.

• Sesebediswa sena se dumellana le ditekanyetso tsa RSS tse sa dumelleng laesense ya Industry Canada. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: (1) sesebelisoa sena se ke ke sa baka tšitiso, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
• Tlas'a melaoana ea indasteri ea Canada, seea-le-moea sena se ka sebetsa feela se sebelisa ente ea mofuta le phaello e ngata (kapa e nyane) e amohetsoeng bakeng sa mochini o fetisoang ke indasteri ea Canada. Ho fokotsa tšitiso e ka bang teng ea seea-le-moea ho basebelisi ba bang, mofuta oa manakana le phaello ea oona li lokela ho khethoa hoo matla a lekanang le a isotropically radiated (eirp) a sa feteng a lumelletsoeng bakeng sa puisano e atlehileng.
• 'me ha ea lokela ho behoa sebakeng se le seng kapa ho sebetsa hammoho le e 'ngoe ea li-antenna kapa transmitterSesebelisoa sena se etselitsoe ho sebetsa ka maemo a matla a bontšitsoeng karolong ea 10.2 le li-antenna tse thathamisitsoeng ho Lethathamo la 2, le ho ba le phaello e phahameng ea 2.1 dBi. Li-antenna tse sa kenyelletsoeng lenaneng lena kapa tse nang le phaello e fetang 2.1 dBi li thibetsoe ka thata ho sebelisoa le sesebelisoa sena. Phello e hlokahalang ea antenna ke 50 ohms.

Boikarabello ba OEM
Malapa a module ea ETRX358x le ETRX358x a netefalitsoe bakeng sa ho kopanngoa le lihlahisoa feela ke bahokahanyi ba OEM tlasa maemo a latelang:

1. Mojule oa phetiso ha oa lokela ho ba teng kapa o sebetse ka kopanelo le antenna kapa transmitter efe kapa efe.

Ha feela boemo bo kaholimo bo fihletsoe, liteko tse ling tsa transmitter li ke ke tsa hlokahala. Leha ho le joalo, mohokahanyi oa OEM o ntse a ikarabella bakeng sa ho lekola sehlahisoa sa bona sa ho qetela bakeng sa litlhoko life kapa life tse ling tse hlokahalang bakeng sa mojule ona o kentsoeng (bakeng sa ex.ample, tlhahiso ea lisebelisoa tsa dijithale, litlhoko tsa peripheral tsa PC, joalo-joalo).

BOHLOKOA HLOKO: Haeba maemo ana a ke ke a finyelloa (bakeng sa litlhophiso tse itseng kapa sebaka se kopanetsoeng le mochine o mong oa motlakase), joale Setifikeiti sa Industry Canada ha se sa nkoa se sebetsa 'me Nomoro ea Setifikeiti sa IC e ke ke ea sebelisoa sehlahisoa sa ho qetela. Maemong ana, mohokahanyi oa OEM o tla ikarabella bakeng sa ho lekola bocha sehlahisoa (ho kenyeletsoa le transmitter) le ho fumana tumello e arohaneng ea indasteri ea Canada. Litlhoko tsa ho Labela IC
Li-module tsa lelapa tsa ETRX358x le ETRX358xHR li ngotsoe ka Nomoro ea eona ea Setifikeiti sa IC. Haeba Nomoro ea Setifikeiti sa IC e sa bonahale ha module e kenngoa ka har'a sesebelisoa se seng, joale ka ntle ho sesebelisoa seo mochine o kentsoeng ho sona se tlameha ho bonts'a lengolo le buang ka module e kentsoeng. Boemong bo joalo, sehlahisoa sa ho qetela se tlameha ho ngoloa sebakeng se bonahalang ka tse latelang:
"E na le Transmitter Module IC: 8735A-EM358X"
or
"E na le IC: 8735A-EM358X"
OEM ea li-module tsa lelapa tsa ETRX358x le ETRX358xHR e tlameha feela ho sebelisa li-antenna tse thathamisitsoeng ka holimo, tse tiisitsoeng ka mojule ona.

Mohokahanyi oa OEM o tlameha ho hlokomela hore a se ke a fana ka tlhahisoleseling ho mosebelisi oa ho qetela mabapi le mokhoa oa ho kenya kapa ho tlosa mojule ona oa RF kapa ho fetola liparamente tse amanang le RF bukeng ea mosebelisi ea sehlahisoa sa ho qetela.
Buka ea mosebelisi bakeng sa sehlahisoa sa ho qetela e tlameha ho kenyelletsa lintlha tse latelang sebakeng se tsebahalang:
"Ho ipapisitse le meeli ea ho pepesetsoa mahlaseli a indasteri ea Canada RF bakeng sa baahi ka kakaretso, transmitter ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe."

Tumellano ea CE (EU) le UKCA (UK).
Li-module tsa malapa a ETRX358x le ETRX358xHR li lumellana le litlhoko tsa bohlokoa le litlhoko tse ling tse amehang tsa EU's Radio Equipment Directive (RED) (2014/53/EU) le UK's Radio Equipment Regulations (RER) (SI 2017/1206). Ho lumellana ho bontšoa ka netefatso khahlano le maemo a amehang, ho kenyeletsoa tse latelang:

• Radio: EN 300 328 v2.2.2
• EMC: EN 301 489-1 v2.1.1, EN 301 489-17 v3.1.1
• Polokeho: EN62368-1:2020+A11:2020

Liteko tsohle li entsoe ka manakana a thathamisitsoeng ho Lethathamo la 2.
Ha module e kenyelletsoa sehlahisoa sa OEM, moetsi oa sehlahisoa sa OEM o tlameha ho netefatsa hore sehlahisoa sa ho qetela se lumellana le EMC ea Europe e lumellanang le matla a tlase.tage/tekanyetso ea polokeho. Ho feta moo, kopano e khethehileng ea sehlahisoa e ka ba le tšusumetso ho makhabane a mahlaseli a RF, 'me bahlahisi le bona ba lokela ho nahana ka hloko tlhahlobo ea mahlaseli a RF ea lihlahisoa tsa bona ho netefatsa hore baa li latela. Sehlahisoa sa ho qetela ha sea lokela ho kheloha litekanyetso tse phahameng tsa matla, litlhaloso tsa manakana, le litlhoko tsa ho kenya tse boletsoeng bukeng ena ea mosebelisi; ho seng joalo, tekolo botjha ya boikamahanyo kgahlano le maemo ohle a amehang e a hlokeha, mme tlhahlobo ya Notified Body e kgothaletswa ka matla.
Li-module li na le tokelo ea ho nka matšoao a ho latela melao ea CE le UKCA, 'me li-Declarations of Conformity (DoC) li fumaneha sehlahisoa. web leqephe, le fumanehang ho qala ka www.silabs.com.
Baetsi ba lihlahisoa tsa OEM le bona ba tlameha ho nahana ka ho sebelisa matšoao a tumellano sebakeng se bonahalang lihlahisoa tsa bona. Bareki ba nka boikarabello bo felletseng ba ho ithuta le ho fihlela litataiso tse hlokahalang bakeng sa naha ka 'ngoe 'marakeng oa bona oa kabo.

EEE 802.15.4
IEEE 802.15.4 ke tekanyetso bakeng sa sekhahla se tlase sa data, marang-rang a se nang mohala (sekhahla se tala ka har'a pakete ea seea-le-moea ea 250kbps @2.4GHz) e shebaneng le litšenyehelo tse tlase, ts'ebetso e tlase ea ts'ebetso, ts'ebeliso ea nako e telele ea betri hammoho le mains- lisebelisoa tse tsamaisoang. Ke motheo oa Protocol ea ZigBee e bulehileng.

Ts'ebetso ea ZigBee
ZigBee Protocol ke sete sa litekanyetso tsa khokahanyo ea waelese bakeng sa tšebeliso pakeng tsa lisebelisoa leha e le life tse fetang sebaka se sekhutšoanyane ho isa ho se mahareng. Tlhaloso e ile ea amoheloa qalong ka December 2004, e bula tsela ea hore lik'hamphani li qale ho etsa hore marang-rang a matla a tlaase e be ntho ea sebele.
ZigBee e sebelisa tlhahiso ea seea-le-moea ea IEEE 802.15.4 e sebetsang sehlopheng sa 2.4GHz, hammoho le likarolo tse ling tse tharo bakeng sa marang-rang, tšireletso le lits'ebetso. Se etsang hore tlhaloso e be e ikhethang ke tšebeliso ea eona ea meralo ea marang-rang ea marang-rang eo, ka mokhoa oa li-backet chain, e fetisang data ho tloha node e 'ngoe ho ea ho e' ngoe ho fihlela e fihla moo e eang teng. Marang-rang a ipholisa 'me a fetola tsela eo a tsamaeang ka eona ha boleng ba lihokelo bo fetoha kapa li-node li tsamaea. Ho feta moo, li-node li ka hlalosoa e le Lisebelisoa tsa Qetello tse sa sebetseng e le li-routers, empa ka hona li ka kenngoa boemong ba ho robala bo fokolang.
Phetolelo e ntlafalitsoeng ea maemo a ZigBee (kapa ZigBee 2006) e ile ea lokolloa ka Tšitoe 2006, ea eketsa likarolo tse ncha le lintlafatso ho mokhoa o le mong feela oa puisano o se nang mohala oa lefats'e o nolofalletsang nts'etsopele ea lisebelisoa tse theko e tlase tse tlase, tse tlase, leihlo le taolo bakeng sa malapa. , mehaho ea khoebo le tlhokomelo ea limela tsa indasteri. Ka 2007, ZigBee Alliance e ile ea hlahisa tšobotsi ea PRO e fanang ka advantages ho feta liphetolelo tsa pejana, ho kenyeletsoa

• Ehlile ho ipholisa mesh marangrang
• Melaetsa joale e ka tsamaea ho fihla ho 30 hops
• Mohloli-Tsela bakeng sa ntlha e ntlafetseng ho fetisa melaetsa e mengata
• Tšireletso e ntlafetseng ho kenyelletsa le linotlolo tsa lihokelo tsa Trust-Center
• Mefuta e mecha ea melaetsa le likhetho

Module Pinout

Setšoantšo sa 1: ETRX3 letoto la Module Pinout (holimo view)
Tafole e ka tlase e fana ka lintlha tse mabapi le kabelo ea phini bakeng sa thekiso e tobileng ea SMD ea li-module tsa letoto la ETRX3 ho boto ea kopo. Bakeng sa tlhaiso-leseling e batsi mabapi le lits'ebetso tse ling ka kopo sheba ho [2].
Lipampiri tsohle tsa GND li hokahane ka har'a mojule, empa bakeng sa ts'ebetso e ntle ka ho fetisisa ea RF kaofela li lokela ho theoa kantle ho sefofane sa fatše.
"Tlhokomeliso ea Bohlokoa: Haeba baqapi ba ka rata ho lula ba bulehile khetho ea ho sebelisa li-module tse tloaelehileng kapa tse telele sehlahisoa se le seng ka kopo hlokomela tse latelang. Letoto la ETRX358x le letoto la li-module tsa ETRX358x-LRS lia lumellana, empa letotong la ETRX358x-LRS li-pins PB0 le PC5 tsa EM358x li sebelisoa ka hare ho laola mojule oa ho qetela mme ha li fumanehe ho mosebelisi.

Letlapa la ETRX358x	Lebitso	EM358x phini	Tšebeliso ea kamehla	Mesebetsi e meng
1	GND	GND	GND
2	PC5 {1}	11		TX_ACTIVE
3	PC6	13	I/O	OSC32B, nTX_ACTIVE
4	PC7	14	I/O	OSC32A, OSC32_EXT
5	PA7 {4}	18	I/O	TIM1C4
6	PB3 {2}	19	I/O, CTS	SC1nCTS, SC1SCLK, TIM2C3
7	nReset {5}	12	nReset
8	PB4 {2}	20	I/O, RTS	TIM2C4, SC1nRTS, SC1nSSEL
9	PA0	21	I/O	TIM2C1, SC2MOSI, USBDM{6]
10	PA1	22	I/O	TIM2C3, SC2SDA, SC2MISO, USBDP{6}
11	PA2	24	I/O	TIM2C4, SC2SCL, SC2SCLK
12	PA3	25	I/O	SC2nSSEL, TIM2C2
13	GND	GND	GND
14	PA4	26	I/O	ADC4, PTI_EN, TRACEDATA2
15	PA5 {3}	27	I/O	ADC5, PTI_DATA, nBOOTMODE, TRACEDATA3
16	PA6 {4}	29	I/O	TIM1C3
17	PB1	30	TXD	SC1MISO, SC1MOSI, SC1SDA, SC1TXD, TIM2C1
18	PB2	31	RXD	SC1MISO, SC1MOSI, SC1SCL, SC1RXD, TIM2C2
19	GND	GND	GND
20	GND	GND	GND
21	JTCK	32		SWCLK
22	PC2	33	I/O	JTDO, SWO, TRACEDATA0
23	PC3	34	I/O	JTDI, TRACECLK
24	PC4	35	I/O	JTMS, SWDIO
25	PB0	36	Ke/O, IRQ	VREF, IRQA, TRACEDATA2, TIM1CLK, TIM2MSK
26	PC1	38	I/O	ADC3, TRACEDATA3
27	PC0 {4}	40	I/O	JRST, IRQD, TRACEDATA1
28	PB7 {4}	41	I/O	ADC2, IRQC, TIM1C2
29	PB6 {4}	42	I/O	ADC1, IRQB, TIM1C1
30	PB5	43	I/O	ADC0, TIM2CLK, TIM1MSK
31	GND	GND	GND
32	VDC	VDC	VDC

Letlapa la 3: Lintlha tsa Pin

Lintlha:

1. Ha tšebetso e 'ngoe e khethiloe, TX_ACTIVE e fetoha tlhahiso e bontšang hore EM358x radio circuit e boemong ba ho fetisa. PC5 ha e sebelisoe mofuteng o molelele oa ETRX358x kaha GPIO ena e sebelisoa ka hare e le TX_ACTIVE ho laola RF e ka ntle.
2. Lihokelo tsa serial tsa UART TXD, RXD, CTS le RTS ke PB1, PB2, PB3 le PB4 ka ho latellana.
3. Haeba PA5 e le tlase ka matla-up kapa reset module e tla qala bootloader
4. PA6, PA7, PB6, PB7 le PC0 li ka khanna motlakase o phahameng (sheba karolo ea 8)
5. nRESET e na le maemo, ha e nahanele maemo. Mojule o ts'oaroa maemong a ho seta bocha ha nRESET e le tlase.
6. ETRX3588, ETRX3586, ETRX3582 le ETRX3588HR, ETRX3586HR, ETRX3582HR tse fapaneng feela.

Sheba hape tafole ea "Pads ea Module le mesebetsi" ho Buka ea Sehlahisoa sa ETRX357 Development Kit. Sheba buka ea Silicon Labs EM358x bakeng sa lintlha tse ling tsa mesebetsi le mabitso a phini.

Tlhaloso ea Hardware

Malapa a ETRX358x le ETRX358xHR a thehiloe ho Silicon Labs EM358x lelapa la ZigBee SoCs. EM358x le EM358xHR li kopantsoe ka ho feletseng 2.4GHz ZigBee transceivers tse nang le microprocessor ea 32-bit ARM® Cortex M3TM, flash le RAM memory, le li-peripheral.
Indasteri e tloaelehileng ea serial wire le JTAG Mananeo a mananeo le a ho lokisa mathata mmoho le likarolo tse tloaelehileng tsa ARM tsa ho lokisa mathata li thusa ho nolofatsa nts'etsopele efe kapa efe ea software e tloaelehileng.
Ho phaella ho sena mesebetsi e mengata ea MAC e boetse e kenngoa ts'ebetsong ea hardware ho thusa ho boloka litlhoko tse tiileng tsa nako tse behiloeng ke litekanyetso tsa ZigBee le IEEE802.15.4.
Likarolo tse ncha tse tsoetseng pele tsa taolo ea matla li lumella ho tsoha ka potlako ho tloha borokong le mekhoa e mecha ea ho theola matla ho lumella mojule ona oa moloko oa 4 ho fana ka bophelo bo bolelele ba betri ho feta li-module tsa moloko oa 1 le oa 2 'marakeng.
Li-module tsa EM358x li na le matla a kopantsoeng ka botlalotagbalaoli ba li-e-regulators ka bobeli ba hlokahalang 1.8V le 1.25V voltages. Molumotages e behiloe leihlo (bosootho bo sootho) mme potoloho e hahiloeng ka matla-on-reset e felisa tlhoko ea potoloho efe kapa efe ea kantle ea ho beha leihlo. Kristale ea boikhethelo ea 32.768 kHz e ka hokela kantle ho li-pads 3 le 4 haeba ho hlokahala nako e nepahetseng haholoanyane. Hoa hlokahala ho sebelisa firmware ea ka ntle ea kristale.

Sesebelisoa sa Hardware
Lithakhisa tsohle tsa GPIO tsa EM358x chips lia fumaneha lipacheng tsa module. Hore na matšoao a sebelisoa e le li-I/O tsa sepheo se akaretsang, kapa a abeloa tšebetso ea peripheral joalo ka ADC e behiloe ke firmware. Ha u theha firmware ea tloaelo ka kopo sheba ho EM358x database [2].

Firmware Tlhaloso

• Ka mokhoa o ikhethileng, li-module li tla be li kentsoe bootloader e ikemetseng e ts'ehetsang bootloading ea moea le ho kenya li-serial bootloader ea firmware e ncha.
• E le hore u kenye bootloader e ikemetseng u sebelisa "hardware trigger" hula PA5 fatše le ho potoloha matla kapa ho tsosolosa mochine. Ho qoba ho kenya bootloader e ikemetseng ka boomo etsa bonnete ba hore ha o hule phini ena fatše nakong ea ho qala ntle le haeba ho hanyetsa fatše ho > 10kΩ. (Ho hula holimo ha ho hlokahale).
• Mojule ka mong o tla le sekhetho se ikhethileng sa 64-bit 802.15.4 se bolokiloeng mohopolong o sa fetoheng. Router hangata ke sesebelisoa se tsamaisoang ke mains ha sesebelisoa sa boroko (SED) se ka tsamaisoa ke betri.
• Mojule o boetse o khona ho sebetsa joalo ka mohokahanyi le Trust Center ka taolo ea moamoheli ea kantle.

Litlhophiso tsa Token
Li-tokens tsa tlhahiso tsa ETRX358x Series Modules li tla hlophisoa esale pele ka litlhophiso tse bontšitsoeng tafoleng e ka tlase.

Letshwao	Tlhaloso	TG kamehla
MFG_CIB_OBS	Li-Byte tsa Khetho
MFG_CUSTOM_VERSION	Nomoro ea Mofuta oa Boikhethelo
MFG_CUSTOM_EUI_64	EUI e ikhethileng
MFG_STRING	Sesebediswa Specific String	TELEBOHILE
MFG_BOARD_NAME	Setsebi sa Hardware
MFG_MANUF_ID	ID ea moetsi	0x1010
MFG_PHY_CONFIG	Litlhophiso tsa Matla a kamehla	0xFF26
MFG_BOOTLOAD_AES_KEY	Senotlolo sa Bootloader
MFG_EZSP_STORAGE	E amanang le EZSP
MFG_CBKE_DATA	SE Tshireletso
MFG_INSTALLATION_CODE	SE Ho kenya
MFG_OSC24M_BIAS_TRIM	Khethollo ea Crystal
MFG_SYNTH_FREQ_OFFSET	Makhetlo a koaloang khafetsa
MFG_OSC24M_SETTLE_DELAY	Nako ea Crystal Stabilizing
MFG_SECURITY_CONFIG	Litlhophiso tsa Tšireletso
MFG_CCA_THRESHOLD	Phaello e phahameng ka ho fetisisa ea liabo tsa CCA
MFG_SECURE_BOOTLOADER_KEY	Sireletsehile Bootloader Key

Letlapa la 4. Li-tokens tsa tlhahiso

Firmware e tloaelehileng
Letoto la li-module tsa ETRX358x ke sethala se loketseng sa ho nts'etsapele firmware ea tloaelo. Bakeng sa ho theha firmware ea moetlo ho hlokahala sesebelisoa sa lisebelisoa tsa Silicon Labs Ember.

Feletseng Maximum Ratings

Che.	Ntho	Letšoao	Feletseng Maximum Ratings	Yuniti
1	Phepelo voltage	VCC	-0.3 ho ea ho +3.6	Vdc
2	Moqtage ho Pad efe kapa efe	Vin	-0.3 ho VCC +0.3	Vdc
3	Moqtage holim'a phini efe kapa efe ea Pad (PA4, PA5, PB5, PB6, PB7, PC1), ha e sebelisoa e le kenyelletso ho sepheo se akaretsang sa ADC ka molumo o tlase.tagmefuta e khethiloeng	Vin	-0.3 ho ea ho +2.0	Vdc
4	Mocheso oa mocheso oa polokelo ea module	Tstg	-40 ho ea ho +105	°C
5	Mocheso oa mocheso oa ho boloka reel	Tstgreel	0 ho ea ho 75	°C
6	Boemo ba mocheso o sebetsang	Holimo	-40 ho ea ho +85	°C
7	Kenya boemo ba RF	Pmax	15	dBm
8	Reflow mocheso	Lefu	Ka kōpo sheba khaolo ea 12	°C

Lethathamo la 5: Litekanyetso tse Felletseng ka ho Fetisisa
Lintlha tse phahameng ka ho fetesisa tse fanoeng ka holimo ha lia lokela ho hatakeloa. Ho feta tekanyo e le 'ngoe kapa ho feta ho ka baka tšenyo e sa feleng sesebelisoa.

Tlhokomeliso! Sesebelisoa sa bohlokoa sa ESD. Litlhokomelo li lokela ho sebelisoa ha u tšoara sesebelisoa e le ho thibela tšenyo e sa feleng.

Litšobotsi tsa Tikoloho

Che.	Ntho	Letšoao	Feletseng Maximum Ratings	Yuniti
1	ESD holim'a pad efe kapa efe ho ea ka potoloho ea Human Body Model (HBM). tlhaloso	VTHHBM	±2	kV
2	ESD ho li-pads tseo e seng tsa RF ho latela "Charge Device Model" (CDM) potoloho tlhaloso	VTHCDM	±400	V
3	ESD ho RF terminal ho latela Charge Device Model (CDM) potoloho tlhaloso	VTHCDM	±225	V
4	Boemo ba Kutloelo-bohloko ea Mongobo	MSL	MSL3, ho latela J-STD-033

Lethathamo la 6: Litekanyetso tse Felletseng ka ho Fetisisa

Maemo a Tšebetso a khothalelitsoeng

Che.	Ntho	Boemo/ Keletso	Letšoao	Boleng			Yuniti
				Min	Tlanya	Max
1	Phepelo voltage		VCC	2.1		3.6	Vdc
2	RF Input Frequency		fC	2405		2480	MHz
3	RF Input Power		PIN			0	dBm
4	Boemo ba mocheso o sebetsang		Holimo	-40		+85	°C

Tafole ea 7: Maemo a Khothaletso a Ts'ebetso

Litšobotsi tsa Motlakase tsa DC

VCC = 3.0V, TAMB = 25°C, NORMAL MODE (eseng Boost) ntle le haeba ho boletswe ka tsela e nngwe

Che.	Ntho	Boemo/ Keletso	Letšoao	Boleng			Yuniti
				Min	Tlanya	Max
1	Phepelo ea module voltage		VCC	2.1		3.6	Vdc
Boroko bo Tebileng Hona Joale
2	Quiscent hona joale, oscillator ea ka hare ea RC e holofetse,	4kB RAM bolokoa	ROBALA		1.0		µA
3	Nako e khutsitseng, ka hare RC oscillator nolofalletsa	4kB RAM bolokoa	ROBALA		1.25		µA
4	Quiscent current, ho kenyeletsoa 32.768kHz oscillator	4kB RAM bolokoa	ROBALA		1.6		µA
5	Hajoale e khutsitseng e kenyelletsa oscillator ea kahare ea RC le 32.768kHz oscillator	4kB RAM bolokoa	ROBALA		1.9		µA
6	Keketseho ea hajoale ka 4kB block ea RAM e bolokiloe		IRAMOROBANE		0,067		µA
Seta Hona Joale bocha
7	Quiscent current nReset e tiisitsoe		IRESET		2	3	mA
processor le Peripheral Currents
8	ARM® CortexTM M3, RAM le memori ea flash	25°C, 12MHz oache ea mantlha	IMCU		7.5		mA
9	ARM® CortexTM M3, RAM le memori ea flash	25°C, 24MHz oache ea mantlha	IMCU		8.5		mA
10	ARM® CortexTM M3, RAM le memori ea flash ea ho robala hona joale	25°C, 12MHz oache ea mantlha	IMCU		4.0		mA
11	ARM® CortexTM M3, RAM le memori ea flash ea ho robala hona joale	25°C, 6MHz Core oache	IMCU		2.5		mA
12	serial controller hona joale	Ka serial molaoli ka max. sekhahla sa oache	ISC		0.2		mA
13	Kakaretso ea nako ea nako ea sepheo	Per timer ka max. sekhahla sa oache	ITIM		0.25		mA
14	Morero o akaretsang oa ADC hajoale	Max. Sample rate, DMA	IADC		1.1		mA
15	USB e sebetsang Hona Joale		IUSB		1		mA
16	USB E Emisa Mokhoa oa Hona Joale		IUSBSUSP			2.5	mA
RX ea Hona joale
17	Radio receiver MAC le Baseband	ARM® CortexTM M3 e robetse.	IRX		23.5		mA
18	Fumana hona joale tshebediso	Kakaretso, 12MHz lebelo la oache	IRX		27		mA
19	Fumana tšebeliso ea hona joale	Kakaretso, lebelo la oache la 24MHz	IRX		28		mA
20	Fumana hona joale tshebediso BOOST MODE	Kakaretso, lebelo la oache la 12MHz	IRX		29		mA
21	Fumana hona joale tshebediso BOOST MODE	Kakaretso, lebelo la oache la 24MHz	IRX		30		mA

TX ea Hona joale
22	Fetisetsa tšebeliso ea hona joale	ho +3dBm matla a tlhahiso ea mojule, CPU ke 12MHz	ITXVCC		31.5		mA
23	Fetisetsa tšebeliso ea hona joale KHOTHATSO MODI	ho +8dBm matla a tlhahiso ea mojule, CPU ke 12MHz	ITXVCC		44		mA
24	Fetisetsa tšebeliso ea hona joale	ho +0dBm matla a tlhahiso ea mojule, CPU ke 12MHz	ITXVCC		29		mA
25	Fetisetsa tšebeliso ea hona joale	ka min. mojule matla a tlhahiso, CPU ho 12MHz	ITXVCC		24		mA
26	Fetisetsa tšebeliso ea hona joale	ho +8dBm module matla a tlhahiso, CPU ho 24MHz	ITXVCC		45		mA
26	Nako ea ho tsoha borokong bo tebileng	Ho tloha ketsahalong ea ho tsoha ho isa ho 1st taelo			110		µs
27	Nako ea ho koala	Ho tloha taeo ea ho qetela ho ea ho boroko bo tebileng			5		µs

Lethathamo la 8: Litšobotsi tsa Motlakase tsa DC

Lemoha ka kopo: Ka karolelano tšebeliso ea hona joale nakong ea ts'ebetso e itšetlehile ka firmware le mojaro oa marang-rang.

Litlhaloso tsa Digital I/O

Li-I/O tsa dijithale tsa mojule oa ETRX35x
VCC = 3.0V, TAMB = 25°C, NORMAL MODE ntle le ha ho boletswe ka tsela e nngwe

Che.	Ntho	Boemo/ Keletso	Letšoao	Boleng			Yuniti
				Min	Tlanya	Max
1	Boemo bo tlase ba ho fetoha ha Schmitt	Schmitt e ntse e tsoela pele ho tloha holimo ho isa tlase	VSWIL	0.42 x VCC		0.5 x VCC	Vdc
2	Boemo bo phahameng ba Schmitt switching	Schmitt e ntse e tsoela pele ho tloha tlase ho isa hodimo	VSWIH	0.62 x VCC		0.8 x VCC	Vdc
3	Kenyelletso ea hajoale bakeng sa logic 0		IIL			-0.5	µA
4	Kenyelletso ea hajoale bakeng sa logic 1		IIH			0.5	µA
5	Boleng ba sehanyetsi sa Inpull-up		RIPU	24	29	34	kΩ
6	Kena Sehanyetsi sa ho hulela fatše boleng		RIPD	24	29	34	kΩ
7	Sephetho voltage bakeng sa logic 0	IOL = 4mA (8mA) bakeng sa maemo (phahameng current) liphahlo	TLHOKOMELO	0		0.18 x VCC	V
8	Sephetho voltage bakeng sa logic 1	IOH = 4mA (8mA) bakeng sa maemo (holimo current) liphahlo	VOH	0.82 x VCC		VCC	V
9	Mohloli oa Tlhahiso Hona Joale	Pad e tloaelehileng ea hona joale	IOHS			4	mA
10	Output Sink hajoale	Standard jwale pad	IOLS			4	mA
11	Mohloli oa Tlhahiso Hona Joale	Letlapa le phahameng la hona joale (1)	IOHH			8	mA
12	Output Sink hajoale	Letlapa le phahameng la hona joale (1)	IOLH			8	mA
13	Kakaretso ea hona joale		IOH + IOL			40	mA
		Letlapa la 9. Digita	l Litlhaloso tsa I/O
Che.	Ntho	Boemo/ Keletso	Letšoao	Boleng			Yuniti
				Min	Tlanya	Max
1	Boemo bo tlase ba ho fetoha ha Schmitt	Schmitt e ntse e tsoela pele ho tloha holimo ho isa tlase	VSWIL	0.42 x VCC		0.5 x VCC	Vdc
2	Boemo bo phahameng ba Schmitt switching	Schmitt input moeli o tlohang tlase ho ea holimo	VSWIH	0.62 x VCC		0.68 x VCC	Vdc
3	Kenyelletso ea hajoale bakeng sa logic 0		IIL			-0.5	µA
4	Kenyelletso ea hajoale bakeng sa logic 1		IIH			0.5	µA
5	Boleng ba sehanyetsi sa Inpull-up	Chip ha e etsoe bocha	RIPU	24	29	34	kΩ
6	Boleng ba sehanyetsi sa Inpull-up	Chip reset	RIPURESET	12	14.5	17	kΩ

Lethathamo la 10. nReset Litlhaloso tsa Pin

Lintlha

1. Lisebelisoa tsa morao-rao tse phahameng ke PA6, PA7, PB6, PB7, PC0

Litšobotsi tsa A/D Converter

ADC ke sesebelisoa sa pele sa sigma-delta converter. Bakeng sa tlhaiso-leseling e batsi ka ADC ka kopo, sheba ho database ea EM358x.

Che.	Ntho
1	Qeto ea A/D	Ho fihlela ho li-bits tse 14
2	A/D sampke nako ea ho fetola 7-bit	5.33µs (188kHz)
3	A/D sampke nako ea ho fetola 14-bit	682µs
4	Reference Voltage	1.2V

Lethathamo la 11. Litšobotsi tsa A/D Converter

Litšobotsi tsa Motlakase oa AC

VCC = 3.0V, TAMB = 25°C, NORMAL MODE e lekantsoeng ho 50Ω terminal load e hoketsoeng soketeng ea U.FL

Che.	Moamoheli	Boleng			Yuniti
		Min	Tlanya	Max
1	Sebaka sa maqhubu	2400		2500	MHz
2	Sensitivity for 1% Packet Error Rate (PER)		-100	-94	dBm
3	Sensitivity bakeng sa 1% Pakete ea Phoso Rate (PER) BOOST MODE		-102	-96	dBm
4	Saturation (boemo bo kaholimo-limo bakeng sa ts'ebetso e nepahetseng)	0			dBm
5	Ho Hanoa ha Channel e Phahameng e Haufi (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		35		dB
6	Ho Hanoa ha Channel e ka Tlase e Haufi (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		35		dB
7	2nd High-Lehlakoreng le Phahameng Haufi le Channel Hana (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		46		dB
8	2nd Low-Lehlakoreng le Tlase Haufi le Channel e Haufi (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		46		dB
9	Khano ea Channel bakeng sa likanale tse ling kaofela (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		40		dB
10	802.11g ho hana e shebaneng le +12MHz kapa -13MHz (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		36		dB
11	Co ho lahla (1% PER le lets'oao le lakatsehang -82dBm acc. ho [1])		-6		dBc
12	Phoso e amanang le maqhubu (2x40ppm e hlokahala by [1])	-120		120	ppm
13	Phoso e amanang le nako (2x40ppm e hlokahala by [1])	-120		120	ppm
14	Letoto la RSSI la mela	40			dB
15	Motlakase o hlahisoang ka matla a holimo ka ho fetisisa NORMAL MODE KHOTHATSO MODI	0	3 8		dBm
16	Motlakase o hlahisoang ka tlhophiso ea matla a tlase haholo		-55		dBm
17	Phoso ea boholo ba vector joalo ka IEEE802.15.4		5	15	%
18	Phoso ea khafetsa ea mokhanni	-40		40	ppm
19	PSD mask e amanang le eona 3.5MHz sebaka ho tloha ho mopalami	-20			dB
20	Maske a PSD a felletseng 3.5MHz sebaka ho tloha ho mopalami	-30			dBm

Lethathamo la 12. Litšobotsi tsa Motlakase oa RF

Lemoha ka kopo: Bakeng sa kamano pakeng tsa litlhophiso tsa matla a EM358x le matla a phallo ea module ka kopo amana le khaolo ea 10.1 ea tokomane ena. Ha o nts'etsapele firmware ea tloaelo litlhophiso tsa matla a tlhahiso tse hlalositsoeng tokomaneng ena li amana ka kotloloho le litlhophiso tsa matla tsa EM358x tse fumanehang ka Ember stack API.

Che.	Litšobotsi tsa Synthesizer	Moeli						Yuniti
		Min		Tlanya			Max
22	Sebaka sa maqhubu	2400					2500	MHz
23	Qeto ea khafetsa			11.7				kHz
24	Notlela nako ho tsoa mmusong, ka litlhophiso tse nepahetseng tsa VCO DAC						100	µs
25	Nako ea ho notlela, phetoho ea kanale kapa phetolo ea Rx/Tx						100	µs
26	Lerata la mohato ho 100kHz offset			-75dBc/Hz
27	Phase lerata ho 1MHz offset			-100dBc/Hz
28	Phase lerata ho 4MHz offset			-108dBc/Hz
29	Phase lerata ho 10MHz offset			-114dBc/Hz
	Lethathamo la 13: Litšobotsi tsa Synthesizer
Che.	Litlhaloso tsa Power On Reset (POR).		Moeli					Yuniti
			Min		Tlanya	Max
30	Ho lokolloa ha VCC POR		0.62		0.95	1.2		Vdc
31	Tlhaloso: VCC POR		0.45		0.65	0.85		Vdc
	Lethathamo la 14: Matla a ho Seta Litlhaloso
Che.	Litlhaloso tsa nRESET		Moeli					Yuniti
			Min		Tlanya	Max
32	Seta Sefeta bocha Nako e sa fetohe		2.1		12	16		µs
33	Seta bocha bophara ba Pulse ho netefatsa ho seta bocha		26					µs
34	Seta bocha bophara ba Pulse e tiisitsoe hore e ke ke ea etsa hore ho behoe bocha		0			1		µs

Lethathamo la 15: Litlhaloso tsa nReset

Litšobotsi tsa Matla a TX

Lits'oants'o tse ka tlase li bonts'a matla a tloaelehileng a tlhahiso le mojule oa hajoale ho its'etleha ho tlhophiso ea motlakase ea EM3588. Litlhophiso tsa matla ka holimo ho 3dBm li na le Mokhoa oa Boost o lumelletsoeng. Ka kopo hlokomela hore matla a tsoang ha a itšetlehe ka matla a phepelotage joalo ka ha seea-le-moea se fanoa ke molumo o laoloang ka haretage.

Litlhophiso tsa Matla bakeng sa Tumellano ea Taolo
Ka lebaka la lithibelo tsa naha maemo a phahameng a matla a li-module tsa lelapa la ETRX358x le ETRX358xHR li hloka ho fetoloa joalo ka ha ho bonts'itsoe litafoleng tse ka tlase. Tlhophiso ea kamehla ea matla ea stack ea EmberZNet ke +3dBm.

Antenna	Likanale 11-18	Likanale 19-24	Channel 25	Channel 26
1/2 Leqhubu	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso
1/4 Leqhubu	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso
Ba palameng	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso	8dBm matlafatso
Hantle-ntle lethathamo la Lethathamo la 11	Lethathamo la 10: Litlhophiso tse phahameng tsa Matla bakeng sa Tumellano ea Europe boholo ba li-setting tsa Matla bakeng sa ho latela melao ea FCC, IC le C-Tick.
Antenna	Likanale 11-18	Likanale 19-24	Channel 25	Channel 26
1/2 Leqhubu	8dBm matlafatso	8dBm matlafatso	7dBm matlafatso	-8dBm e tloaelehileng
1/4 Leqhubu	8dBm matlafatso	8dBm matlafatso	7dBm matlafatso	-8dB e tloaelehileng
Ba palameng	8dBm matlafatso	8dBm matlafatso	7dBm matlafatso	-8dB e tloaelehileng

Lethathamo la 11: Boholo ba Litlhophiso tsa Matla bakeng sa FCC, IC Compliance

Litekanyo tsa 'Mele

Letšoao	Tlhaloso	Tsela e tloaelehileng
L	Bolelele ba mojule	25.0 limilimithara
W	Bophara ba mojule	19.0 limilimithara
H	Bophahamo ba mojule	3.8 limilimithara
A1	Bohareng ba sebaka sa pad PCB edge	0.9 limilimithara
A2	Pitch	1.27 limilimithara
R1	Sebaka sa ho tsoa ho tloha sekhutlong sa PCB	17.5 limilimithara
R2	Sebaka sa ho tsoa ho tloha sekhutlong sa PCB	4.1 limilimithara
X1	Bohareng ba sebaka sa sehokelo sa Antenna PCB edge	3.8 limilimithara
X2	Bohareng ba sebaka sa sehokelo sa Antenna PCB edge	2.8 limilimithara

Letlapa la 12: Litekanyo tsa 'Mele tsa ETRX3
Bakeng sa ts'ebetso e nepahetseng ea RF ha o sebelisa antenna e ka holim'a board, antenna e lokela ho ba hukung ea PCB ea sephethephethe. Ha hoa lokela ho ba le likarolo, litsela kapa lifofane tsa koporo sebakeng sa ho boloka se lokelang ho ba seholo ka hohle kamoo ho ka khonehang. Ha o sebelisa sehokelo sa U.FL RF sebaka sa ho boloka ha se hlokahale hore se mameloe. Tlhokomeliso: Lethathamo la li-transmit/receive tsa li-module li tla ipapisa le lenakana le sebelisitsoeng le ntlo ea sehlahisoa se felileng.

E khothalelitsoe Reflow Profile

E kgothaletswa mocheso profile bakeng sa reflow soldering

Tšebeliso ea "No-Clean" solder paste e khothalletsoa ho qoba tlhokahalo ea ts'ebetso ea ho hloekisa. Ho hloekisa mojule ho nyahame ka matla hobane ho tla ba thata ho netefatsa hore ha ho na moemeli oa ho hloekisa le masala a mang a setseng ka tlas'a lekoti le sireletsang hammoho le lekhalo pakeng tsa mojule le boto ea baeti.

Lemoha ka kopo:
Palo e phahameng haholo ea lipotoloho tsa phepelo: 2
Phalliso e ka lehlakoreng le fapaneng e thibetsoe ka lebaka la boima ba module. (ke hore, ha oa lokela ho beha mojule ka tlase / ka tlase ho PCB ea hau le ho phalla hape).

Sets'oants'o sa Label ea Sehlahisoa

Litekanyo tsa label ke 16.0mm x 14.0 mm. Leibole e tla mamella mocheso le lik'hemik'hale tse sebelisoang nakong ea mokhoa o tloaelehileng oa tlhahiso.

Khatiso	Tlhaloso
Mohlala: ETRX3587/ETRX3587HR	Tlhaloso ea nomoro ea mojule
Matšoao a Setifikeiti	Lintlha tse amanang le setifikeiti tse joalo ka matšoao a ho latela melao ea CE le UKCA le li-ID tsa FCC le IC, joalo-joalo, li tla ngoloa sebakeng se hahelletsoeng kapa li hatisoe ka lehlakoreng le ka morao la mojule, ho latela litlhoko tsa 'mele oa taolo.
Khoutu ea QR	QR Code e nang le tlhaiso-leseling ka mokhoa oa YYWWMMABCDE YY: Linomoro tse peli tsa ho qetela tsa selemo sa kopano WW: Beke ea ho sebetsa ea linomoro tse peli ha sesebelisoa se ne se kopanngoa MMABCDE: Silicon Labs unit code
YYWWTTTTTT	Serial Number Code ka mokhoa oa YYWWTTTTTT YY: linomoro tse peli tsa ho qetela tsa selemo sa kopano WW: Beke ea tšebetso ea linomoro tse peli ha sesebelisoa se ne se kopanngoa TTTTTT: Ho hlahisa khoutu ea trace. Lengolo la pele ke ntlafatso ea sesebelisoa.

Lethathamo la 13: Lintlha tsa Label tsa ETRX358x

E khothalelitsoeng Footprint

E le ho phahamisa mojule oa letoto la ETRX3, re khothaletsa hore o sebelise lipache tse bophara ba 1mm le bophahamo ba 1.2mm. U tlameha ho boloka sebaka sa polokelo se bontšitsoeng karolong ea 11, 'me u netefatse hore sebaka sena sa polokelo ha se na likaroloana, litselana tsa koporo le/kapa lifofane/marala a koporo.
U tlameha hape ho etsa bonnete ba hore ha ho na koporo e pepeneneng moralong oa hau e ka kopanang le bokatlase ba mojule oa letoto la ETRX3.
Bakeng sa ts'ebetso e ntle ka ho fetisisa ea RF ho hlokahala ho fana ka likhokahano tse ntle tsa fatše ho li-pads tsa mojule. E kgothaletswa ho sebelisa vias multiple pakeng tsa mong le e mong letlapa fatše le e tiileng fatše sefofane ho fokotsa inductance tseleng fatše.

Litekanyo tsa mokhoa oa mobu ka holimo li sebetsa e le tataiso.
Re khothaletsa hore o sebelise litekanyo tsa pad tse tšoanang bakeng sa skrini sa solder peista joalo ka ha o na le lipampiri tsa koporo. Leha ho le joalo boholo le libopeho tsena li ka 'na tsa hloka ho fapana ho itšetlehile ka mekhoa ea hau ea ho kopanya le litekanyetso tsa hau tsa tlhahiso. Re khothaletsa botenya ba skrine ba 120μm ho isa ho 150μm.
Setšoantšo sa 9 se bonts'a litekanyo tse tloaelehileng tsa pad ea module le Figure 10-Figure 12 karolong ea 14.1 show ex.amplintlha tsa mokhoa oa ho hokahanya module ho PCB ea eona e amohelang.

Le hoja bokatlase ba li-module tsa lihlopha tsa ETRX3 li koahetsoe ka ho feletseng, ha ho na koporo e pepesitsoeng, joalo ka li-vias tsa lesoba, lifofane kapa litsela tse holim'a karolo ea hau ea boto, li lokela ho behoa ka tlase ho ETRX3 series module e le ho qoba 'shorts'. Li-module tsohle tsa ETRX3 li sebelisa PCB ea multilayer e nang le sefofane se ka hare sa RF se sireletsang fatše, ka hona ha ho hlokahale hore ho be le sefofane se eketsehileng sa koporo ka ho toba tlas'a module ea ETRX3.

Qetellong ho kgothaletswa hore o se ke oa sebelisa flux e hloekileng ha o rekisa lelapa la ETRX358x la li-module le ho se sebelise mokhoa oa ho hlatsoa ka mor'a ho phalla hape. Haeba ts'ebetso e hloka ho hlatsuoa, ho lokela ho hlokomeloe hore ha ho ntho ea ho hlatsoa e qabeletsoeng ka tlas'a lekotikoti le sireletsang kamora hore ts'ebetso ea ho omisa e felile.

Recommended Placement
Ha u beha mojule ka kopo, fumana antenna hukung joalo ka ha ho bonts'itsoe ho Setšoantšo sa 10 e le hore ho lateloe sebaka sa polokelo ea antenna, kapa u kenye sebaka se se nang koporo joalo ka ha ho bonts'itsoe ho Setšoantšo sa 12.

Example Carrier Board
Kaha ts'ebetso ea RF ea module e nang le antenna e ka holim'a board e itšetlehile haholo ka sebaka se nepahetseng sa mojule botong ea eona e tsamaisang thepa, Setšoantšo sa 13 se bonts'a boto e tsamaisang litšupiso e neng e sebelisoa nakong ea tlhahlobo ea Telegesis.

Bakeng sa ts'ebetso e ntle ka ho fetisisa, ho khothaletsoa ho beha antenna hukung ea boto ea bajari le ho hlompha libaka tse khothaletsoang tsa ho boloka joalo ka ha ho hlalositsoe karolong ea 11.
Qetellong ho fana ka sebaka se setle sa litšupiso ho antenna e ka sekepeng, boto e tsamaisang thepa e lokela ho ba le sefofane sa fatše se sa feteng 40 x 40mm. Maemong a mangata sefofane se senyenyane sa fatše se tla lekana, empa ho senyeha ha tšebetso ea seea-le-moea e ka ba phello.

Liteko tsa ho Tšepahala

Litekanyo tse ka tlase li entsoe ka sampe fokotsehile ka tlhahiso ea bongata mme e fetisitsoe ka mor'a hore mojule o pepesehetse mocheso o tloaelehileng oa kamore le mongobo bakeng sa hora e le 'ngoe.

Che	Ntho	Moeli	Boemo
1	Teko ea vibration	Parameter ea motlakase e lokela ho ba ka mokhoa o ikhethileng	Khafetsa: 40Hz,Ampbophahamo: 1.5mm 20min. / potoloho,1hrs. e 'ngoe le e' ngoe ea motsoako oa X le Y
2	Teko ea ho tšoha	joalo ka tse ka holimo	E oela holim'a lehong le thata ho tloha bophahamong ba 50cm ka makhetlo a 10
3	Teko ea potoloho ea mocheso	joalo ka tse ka holimo	-40 ° C bakeng sa metsotso e 30. le +85 ° C bakeng sa 30min.; mocheso ka mong 300 lipotoloho
5	Mocheso o tlase. teko	joalo ka tse ka holimo	-40°C, 300h
6	Mocheso o phahameng. teko	joalo ka tse ka holimo	+85°C, 300h

Lethathamo la 14: Liteko tsa ho Tšepahala

Lintlha tsa Kopo

Litlhokomelo tsa Tšireletso

Litlhaloso tsena li reretsoe ho boloka netefatso ea boleng ba lihlahisoa e le likarolo tsa motho ka mong.
Pele o sebelisoa, hlahloba le ho lekola tšebetso ea module ha e kentsoe lihlahisoa tsa hau. Latela lintlha tsena ha u sebelisa lihlahisoa. Lihlahisoa tsena li ka nka nako e khuts'oane. Haeba ho lebelletsoe litšisinyeho tsa motlakase, mosi, mollo, le/kapa likotsi tse amang bophelo ba motho ha potoloho e khuts'oane e etsahala, joale fana ka mesebetsi e latelang e sa sebetseng joalo ka bonyane:

1. Netefatsa polokeho ea sistimi eohle ka ho kenya potoloho ea ts'ireletso le sesebelisoa sa ts'ireletso.
2. Netefatsa tšireletseho ea tsamaiso eohle ka ho kenya potoloho e sa hlokahaleng kapa tsamaiso e 'ngoe ho thibela phoso e le' ngoe e bakang boemo bo sa sireletsehang.

Lintlha tsa Boenjiniere ba Moralo

1. Mocheso ke sesosa se seholo sa ho khutsufatsa bophelo ba li-module. Qoba ho kopanya le ho sebelisa lisebelisoa tse lebisitsoeng maemong ao mocheso oa sehlahisoa o ka fetang boholo bo lumelletsoeng.
2. Ho hloleha ho etsa joalo ho ka baka ho nyenyefatsa ts'ebetso ea sehlahisoa le ho senyeha ha sehlahisoa.
3. Haeba li-pulses kapa meroalo e meng ea nakoana (mojaro o moholo o kentsoeng ka nako e khuts'oane) o sebelisoa lihlahisoa, pele o sebelisoa, hlahloba le ho lekola tšebetso ea tsona ha li bokelloa lihlahisoa tsa hau.
4. Lihlahisoa tsena ha li reretsoe ho sebelisoa tse ling, ntle le tlas'a maemo a khethehileng a bontšitsoeng ka tlase. Pele u sebelisa lihlahisoa tsena tlas'a maemo a joalo a khethehileng, hlahloba ts'ebetso ea bona le ho tšepahala tlas'a maemo a khethehileng a boletsoeng ka hloko, ho fumana hore na li ka sebelisoa ka tsela e joalo kapa che.
5. Mokelikeli, joalo ka metsi, metsi a letsoai, oli, alkali, kapa mokelikeli oa tlhaho, kapa libakeng tseo mokelikeli o ka bang teng.
6. Letsatsing le tobileng, ka ntle, kapa sebakeng se lerōle
7. Sebakeng seo ho etsahala ho condensation.
8. Sebakeng se nang le khase e kotsi haholo (mohlala, moea o letsoai, HCl, Cl2, SO2, H2S, NH3, le NOx)
9. Haeba e sa tloaelehang voltage sebelisoa ka lebaka la bothata bo hlahang likarolong tse ling kapa lipotolohong, nkela lihlahisoa tsena sebaka ka lihlahisoa tse ncha hobane li ka 'na tsa se ke tsa khona ho fana ka ts'ebetso e tloaelehileng esita le haeba litšobotsi tsa bona tsa elektronike le ponahalo li bonahala li khotsofatsa.
10. Khatello ea mochine nakong ea kopano ea boto le ts'ebetso e tlameha ho qojoa.
11. Ho hatella likarolo tsa sekoahelo sa tšepe kapa lintho tse tiisang sekoahelo sa tšepe ha ho lumelloe.

Maemo a polokelo

1. Mojule ha oa lokela ho hatelloa ka mochini nakong ea polokelo.
2. Se boloke lihlahisoa tsena maemong a latelang kapa litšobotsi tsa ts'ebetso ea sehlahisoa, joalo ka ts'ebetso ea RF, li ka ameha hampe:
3. Ho boloka moeeng o letsoai kapa sebakeng se nang le khase e senyang haholo, joalo ka Cl2, H2S, NH3, SO2, kapa NOX.
4. Ho boloka (pele ho kopano ea sehlahisoa sa ho qetela) ea li-module nako e fetang selemo ka mor'a letsatsi la ho pepa k'hamphani ea hau le haeba maemo ohle a ka holimo (1) ho (3) a fihletsoe, a lokela ho qojoa.

Sephutheloana

Theipi e Khabisitsoeng

1. Litekanyo tsa theipi
2. Koahela tape peel matla
3. Lipokotho tse se nang lethoNB: Lipokotho tse se nang letho sebakeng se nang le baahi ba bangata li tla ba ka tlase ho tse peli ka reel 'me lipokotho tse se nang letho li ke ke tsa latellana.
   Karolo ea Boithuto
   Theipi ea sekoahelo se ka holimo e ke ke ea thibela masoba a theipi e tsamaisang thepa 'me e ke ke ea fetela ka nģ'ane ho mathōko a theipi e tsamaisang thepa.Reel Dimensions
4. Bongata ka reel: likotoana tse 600
5. Ho tšoaea: Karolo Che. / Bongata / Nomoro ea Lotho 'me karolo ea moetsi # e nang le bar-code e tla ba holim'a reelSephutheloana
6. Reel e 'ngoe le e' ngoe e tla kenngoa ka mokotleng o tiisitsoeng ka hermetically
7. Ho tšoaea: Reel / Antistatic Packaging / Reel Lebokose le Lebokose la ka ntle le tla ba le label e latelang

Khatiso	Tlhaloso
MFG P/N: 99X902DL	Tšebeliso ea ka hare
Tlhaloso: 00	Tšebeliso ea ka hare
P/N: ETRX3587	Telegesis Module Order Code.
Ntho: 600	Bongata ba li-module ka hare ho reel/carton
Nomoro ea mohala: 000001	Nomoro e ikhethang ea Reel ea linomoro tse ts'eletseng ho tloha ho 000001
Letsatsi:120824	Khoutu ea Letsatsi ka mokhoa oa YYMMDD, mohlala 120824
P/C: ETRX3587-R308	Khoutu ea sehlahisoa sa mojule mabapi le mofuta oa firmware/module o khethiloeng nakong ea ATE. Haeba ho hlokahala multiline.
2D-Barcode	Tlhahisoleseding e ho 32×32 Datamatrix 2D-Barcode are and identifier “!REEL” [5 characters], the reel number [6 characters], the Module Order code [max 18 characters], bongata [max 4 characters] , letsatsi ka sebopeho sa Selemo-Khoeli-Letsatsi [litlhaku tse 6] le khoutu ea sehlahisoa [litlhaku tse fetelletseng tse 40], kaofela li arotsoe ka semikholone.

Ho Odara Boitsebiso

Khoutu ea ho odara/Sehlahisoa1, 2	Tlhaloso
ETRX35813, 4 ETRX35823, 4 ETRX35853, 4 ETRX35863, 4	Telegesis Wireless Mesh Networking Module e nang le Silicon Labs ZigBee Technology:   E thehiloe ho Silicon Labs EM358x SoC Antenna e kopantsoeng ea 2.4GHz
ETRX35873
ETRX35883
Setšoantšo sa ETRX3581HR3, 4 Setšoantšo sa ETRX3582HR3, 4 Setšoantšo sa ETRX3585HR3, 4 Setšoantšo sa ETRX3586HR3, 4	Telegesis Wireless Mesh Networking Module e nang le Silicon Labs ZigBee Technology:   E thehiloe ho Silicon Labs EM358x SoC U.FL coaxial Antenna Connector
Setšoantšo sa ETRX3587HR3
Setšoantšo sa ETRX3588HR3, 4
Tlhaloso: ETRX357DVK 4	Telegesis Development Kit e nang le:  3 x Maboto a Nts'etsopele ea ETRX3DVK 3 x lithapo tsa USB 2 x ETRX357 libotong tsa bajari 2 x ETRX357HR libotong tsa bajari 2 x ETRX357-LRS ho liboto tsa bajari 2 x ETRX357HR-LRS libotong tsa bajari 1 x ETRX3USB thupa ea USB manakana a 2 x ½-wave2 x ¼-wave manakana
Setšoantšo sa ETRX3587 4	2 x ETRX3587 libotong tsa bajari 2 x ETRX3587HR libotong tsa bajari 2 x ETRX3587-LRS ho liboto tsa bajari 2 x ETRX3587HR-LRS libotong tsa bajari
Lintlha: Li-PO tsa bareki li tlameha ho bolela Khoutu ea Ho Odara/Sehlahisoa. Ho na le che Mofuta o "se nang letho" oa li-module tsa ETRX358x tse fumanehang. MOQ le Nako ea Ketapele ea sebetsa. Karolo ena ke End of Life (EOL) mme ha e sa fumaneha.

Phatlalatso ea RoHS

Phatlalatso ea ho lumellana ha tikoloho bakeng sa lihlahisoa tse fanoeng:
Mona re phatlalatsa ho ipapisitsoe le phatlalatso ea barekisi ba rona hore sehlahisoa sena ha se na lintho tse thibetsoeng ke Directive 2011/65/EU (RoHS2) kapa haeba li etsa joalo, li na le khatello e phahameng ea 0,1% ka boima ba 'mele. lisebelisoa tsa homogeneous bakeng sa:

• Metsoako ea loto le loto
• Mercury le metsoako ea mercury
• Chromium (VI)
• Sehlopha sa PBB (polybrominated biphenyl).
• Sehlopha sa PBDE (polybrominated biphenyl ether).

Le khatello e phahameng ea 0.01% ka boima ba 'mele ka thepa e tšoanang bakeng sa:

• Metsoako ea cadmium le cadmium

Boemo ba Leqephe la Lintlha

Telegesis (UK) Ltd. e na le tokelo ea ho fetola tlhaloso ntle le tsebiso, e le ho ntlafatsa moralo le ho fana ka sehlahisoa se molemo ka ho fetisisa. Ka kopo, sheba leqephe la data le sa tsoa ntšoa pele o qala kapa o phethela moralo.

Litokomane Tse Amanang

1. Litlhaloso tsa IEEE Standard 802.15.4 –2003 Wireless Medium Access Control (MAC) le Physical Layer (PHY) bakeng sa Marang-rang a Tlase a Wireless Personal Area Networks (LR-WPANs)
2. Lethathamo la lintlha tsa EM358x, Silicon Labs. (www.silabs.com)
3. Datasheet U.FL-Series 2004.2 Hirose Ultra Small Surface Mount Coaxial Connectors -Low Profile 1.9mm kapa 2.4mm Mated Height
4. Tlhaloso ea ZigBee (www.zigbee.org)
5. Tlhaloso ea Antenova Rufa Antenna (www.antenova.com)
6. Embedded Antenna design Ltd. (EAD Ltd.) (www.ead-ltd.com)

• IoT Portfolio
  www.silabs.com/products
• Boleng
  www.silabs.com/quality
• Tšehetso & Sechaba
  www.silabs.com/community

Boithorollo
Silicon Labs e ikemiselitse ho fa bareki litokomane tsa morao-rao, tse nepahetseng, le tse tebileng tsa lisebelisoa tsohle le li-module tse fumanehang bakeng sa li-imple-menters tsa tsamaiso tse sebelisang kapa tse ikemiselitseng ho sebelisa lihlahisoa tsa Silicon Labs. Lintlha tsa sebopeho, li-module le li-peripherals tse fumanehang, boholo ba memori le liaterese tsa memori li bua ka sesebelisoa se seng le se seng, 'me li-parameter tsa "Ts'ebetso" tse fanoeng li ka fapana ebile li ka fapana lits'ebetsong tse fapaneng. Mohlala oa kopoamptse hlalositsoeng mona ke tsa merero ea litšoantšo feela. Silicon Labs e na le tokelo ea ho etsa liphetoho ntle le tsebiso e eketsehileng ho tlhahisoleseding ea sehlahisoa, litlhaloso le litlhaloso tse teng mona, 'me ha e fane ka litiisetso mabapi le ho nepahala kapa botlalo ba tlhahisoleseding e kenyellelitsoeng. Ntle le tsebiso ea pele, Silicon Labs e ka ntlafatsa firmware ea sehlahisoa nakong ea ts'ebetso ea tlhahiso bakeng sa mabaka a ts'ireletso kapa a ts'epahalo. Liphetoho tse joalo li ke ke tsa fetola litlhaloso kapa ts'ebetso ea sehlahisoa. Silicon Labs e ke ke ea ba le boikarabello bakeng sa litlamorao tsa ts'ebeliso ea tlhaiso-leseling e fanoeng tokomaneng ena. Tokomane ena ha e bolele kapa e fane ka tumello e hlakileng ea ho rala kapa ho etsa lipotoloho life kapa life tse kopaneng. Lihlahisoa ha lia etsetsoa kapa ha lia lumelloa ho sebelisoa ka har'a lisebelisoa life kapa life tsa FDA Class III, likopo tseo ho tsona ho hlokehang tumello ea FDA pele kapa Life Support Systems ntle le tumello e ngotsoeng e tobileng ea Silicon Labs. "Sistimi ea Ts'ehetso ea Bophelo" ke sehlahisoa kapa sistimi efe kapa efe e reretsoeng ho ts'ehetsa kapa ho ts'ehetsa bophelo le / kapa bophelo bo botle, boo, haeba bo hloleha, bo ka lebelloang ka mokhoa o utloahalang ho fella ka kotsi e kholo ea motho kapa lefu. Lihlahisoa tsa Silicon Labs ha lia etsoa kapa ha lia lumelloa ho sebelisoa sesoleng. Lihlahisoa tsa Silicon Labs li ke ke tsa sebelisoa ho libetsa tse senyang batho ba bangata ho kenyeletsoa (empa li sa felle ho) libetsa tsa nyutlelie, likokoana-hloko kapa lik'hemik'hale, kapa limisaele tse khonang ho fana ka libetsa tse joalo. Silicon Labs ha e fane ka litiisetso tsohle tse hlakileng le tse boletsoeng 'me e ke ke ea ikarabella kapa ea ikarabella bakeng sa likotsi kapa ts'enyehelo e amanang le ts'ebeliso ea sehlahisoa sa Silicon Labs lits'ebetsong tse sa lumelloeng.

Hlokomela: Litaba tsena li kanna tsa ba le mantsoe a khopisang a seng a sa sebetse. Silicon Labs e nkela mantsoe ana sebaka ka puo e kenyeletsang hohle moo ho khonehang. Ho fumana lintlha tse ling, etela www.silabs.com/about-us/inclusive-lexicon-project

Lintlha tsa Letšoao la Khoebo
Silicon Laboratories Inc.®, Silicon Laboratories®, Silicon Labs®, SiLabs® le Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, EFM®, EFM32®, EFR, Ember®, Energy Micro, logo ea Energy Micro le metsoako ea eona. , “li-microcontrollers tse sebelisang matla ka ho fetisisa lefatšeng”, Redpine Signals®, WiSeConnect , n-Link, ThreadArch®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, Gecko OS, Gecko OS Studio, Precision32®, Simplicity Studio®, Telegesis, the Telegesis Logo®, USBXpress® , Zentri, logo ea Zentri le Zentri DMS, Z- Wave®, le tse ling ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Silicon Labs. ARM, CORTEX, Cortex-M3 le THUMB ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a ARM Holdings. Keil ke lets'oao la khoebo le ngolisitsoeng la ARM Limited. Wi-Fi ke letšoao la khoebo le ngolisitsoeng la Wi-Fi Alliance. Lihlahisoa tse ling kaofela kapa mabitso a mabitso a boletsoeng mona ke matšoao a beng ba ona.

Litlhaloso tsa likarolo tsa Silicon Laboratories Inc.
400 West Cesar Chavez Austin, TX 78701
usa
www.silabs.com

Litokomane / Lisebelisoa

SILICON LABS ETRX3587 Fokotsa Nako ea Tsoelo-pele ea IoT [pdf] Bukana ea Mosebelisi ETRX3587 Fokotsa Nako ea Nts'etsopele ea IoT, ETRX3587, Fokotsa Nako ea Nts'etsopele ea IoT, Nako ea Nts'etsopele ea IoT, Nako ea Nts'etsopele.

Litšupiso

• Bukana ea Mosebelisi