Litaba
pata
SecurFOG SFOG-R Libano-Thehiloeng Security Moholi System
LIKAROLOANA
HO IPHETHA Ema u le mong kapa sistimi e thehiloeng bohareng
- Tšebeliso e tlase haholo ea matla
- Ketso ka netefatso e le 'ngoe kapa habeli
- Ha ho na mosi o chefo le o matla oa libano
- Ha ho lerōle kapa masalla a setseng
- Ho ba teng ha mosi ka ho sa feleng (bonyane ba hora e 1)
KENYA MATSOSO
LED LE SIREN KENYA
| LED | Naha | Ketso |
| Botala | Alamo ha e sebetse | Bulela metsotsoana e 5 |
|
Boputsoa |
Khatriji/ karete e sieo, e sebelisitsoeng kapa ea nako e behiloeng ha e tsejoe | Hlahisa makhetlo a 3 metsotsoana e meng le e meng e 30 |
| Betri e tlase | Benya ha 1 metsotsoana e meng le e meng e 30 | |
|
Khubedu |
Alamo e butswe | Bulela metsotsoana e 5 |
| Ho hlahile alamo | Benya ha 1 metsotsoana e meng le e meng e 30 | |
| Pele Alamo e etsahetse | Hlahisa ha 1 motsotsoana o mong le o mong** |
| Naha | Ketso | |
|
SIRENE |
Alamo ha e sebetse | 2 melumo |
| Ho qobella ho kenya* | 2 melumo | |
| Alamo e butswe | 1 molumo | |
| Ho hlahile alamo | Molumo o tsoelang pele bakeng sa metsotso e 2 | |
| Pele Alamo e etsahetse | Molumo o le 1 motsotsoana o mong le o mong bakeng sa metsotsoana e 20** |
- ts'ebetso e qobelloang e bolela ho leka ho kenya sistimi ha o ntse o kenya (SENS, ALM e butsoe, DIP4 ON)
- Molumo oa siren oa pele oa metsotsoana e 20 o tla ba teng, kamora ho emisa siren ea metsotsoana e 20, LED e RED e tla panya bakeng sa metsotsoana e meng e 20.
KHOPO LE PINOUT
- J5: Sehokelo sa pakete ea betri
- LED: sehokelo sa LED
- SIR: Sehokelo sa siren sa ka hare
- JP1: Mokhoa oa liteko le jumper ea lenaneo SW4-DIP Switch: Bakeng sa ho Seta
- M1: Sehokelo sa karete ea netefatso
- SW2: Tampli-switches - Sensor ea Wall
- SW3: Tamper switches - Cover Sensor
- M1: Ntle le karete ea netefatso, kapa ka in va lidca rd , SENSORFOG e sebetsa joalo ka yuniti e bonolo ea taolo ea alamo. Cartridge e ke ke ea sebelisoa
LITŠOANTŠISO LE LINTHO TSA PCB
- SMOKE: Capsule terminal: kopanya lithapo tsa mebala e tšoanang ebe o hokela ho terminal e le 'ngoe.
- SENS: pulses count sensor input; beha parameter ka DIP-Switch 5 & 6
- IMM: Ho kenya alamo hang-hang (e mpe ho hula); E tlang pele ho li-setting tsa KEY
- ALM: Kenyeletso ea Sensor ea Pele ho Alarm (e hanang ho hula)
- SEHLOOHO: Ho kenya ALARM (e mpe ho hula); e lumella ho kenya alamo ho ALL le SENS tse kentsoeng
- OUT: OC anomaly output (negative to push) butle butle
- betri e tlase kapa
- karete e sa sebetseng kapa
- khatriji e sieo e sebelisitsoeng kapa khatriji ea nako ea ho qetela OUT e tla "koaloa" feela bakeng sa 400ms (ho boloka matla)
- 24H: mahala ho ikopanya le tamper output (anti-sabotage) trough e kentsoeng SW2 kapa SW3
TS'ELISO LITS'OANELO
Ka DIP-Switches 1-6 hoa khoneha ho beha likhetho tse fapaneng tse hlalositsoeng karolong e fetileng.
BOHLOKOA
Ho qala di-setting, PULL OUT Jumper Socket ho JP1 (haeba o kentse). Etsa liphetoho tse hlokahalang kapa li-setting. Ho netefatsa le ho kenya li-setting kenya Jumper Socket ho JP1.
| Lenaneo la ho qetela la Capsule | ||
| KOTSA 1 | KOTSA 2 | LILEMO |
| TLOA | TLOA | 1 |
| TLOA | ON | 2 |
| ON | TLOA | 3 |
| ON | ON | 4 |
| Siren le mokhoa oa ho kenya ka lithapo | ||
| DIP | ON | TLOA |
| 3 | Siren On | Siren Off |
| 4* | Dumella ho kenya ka mehala | Tlosa ho kenya mohala |
LINTLHA TSEO:
Litlhophiso tsa DIP 4 li sebetsa bakeng sa KEY, IMM, ALL, SENS
- haeba 'Enable wired input' mela ea ho kenya KEY ALM SENS IMM HA E NEGATIVE TO PULL
- tabeng ea 'Disable wire input FEELA litaelo tsa waelese li fumaneha ka remote control kapa TRx module
| SENS Sekhetho sa ho bala lipompo | ||
| KOTSA 5 | KOTSA 6 | LITLHABISO |
| TLOA | TLOA | 1 |
| TLOA | ON | 2 |
| ON | TLOA | 3 |
| ON | ON | 5 |
MOKHOA OA HO KENYA
- Unscrew fastening screw ebe o tlosa sekwahelo. Tlosa setikara sa polasetiki ka tlase ho khatriji
- Hula Jumper Socket ho JP1. Beha Liphetoho tsa DIP ho latela litlhoko tsa hau, joalo ka ha ho hlalositsoe karolong ea 5. Kenya Jumper Socket ho JP1 ho netefatsa le ho kenya tšebetsong litlhophiso.
- Ho etsa "tlhahlobo ea ho tsamaea" pele o kenya cartridge: Tlosa Jumper Socket ho JP1; Etsa "tlhahlobo ea ho tsamaea"; ebe Kenya Jumper Socket ho JP1
- Hang ha Jumper Socket JP1 e kentsoe, screw Cover morao, nakong ea metsotso e 4. Nakong ena ea metsotso e 4 LED e khubelu e tla benya. Ka mor'a metsotso e 4 LED e khubelu e tla emisa ho bonesa 'me tsamaiso e bulehile
RETS'ELISITSOE MAHALA
BOHLOKOA
Lihlahisoa tsohle tse se nang mohala tsa SensorFog tse rekiloeng e le "KIT", li se li kopantsoe le remote taolo. HA HO HLOKAHALA KETSO E EKETSEHILENG.
RESETSOE SENSORFOG-WAELA
- Tlosa pakete ea betri ebe o tobetsa bobeli ba tampers makhetlo a 6-7 ho tlatsa cap e feletseng
- Kenya pakete ea betri, emela ho bipi ebe o tobetsa makhetlo a 2 ka bobeli tampers. LED e khubelu e tla benya ka makhetlo a 3. Ho seta bocha ho phethetsoe ka katleho.
SEBELISA MOKHOA OA HO PAREKA HO SFOG-R LE HO PATALA LE TAOLI E HOLE
BOHLOKOA:
Lihlahisoa tsohle tse se nang mohala tsa SensorFog tse rekiloeng e le "KIT", ke hore, SFOG-R (KIT) kapa SFOG-R (DEMO), li se li kopantsoe le remote control. HA HO KETSO E FETA RETS'ELISITSOE.
SEBELISA MOKHOA OA HO PAREKA HO SFOG-R
- Hula pakete ea betri ebe o tobetsa bobeli ba tampers makhetlo a 6-7 ho tlatsa cap e feletseng
- Kenya pakete ea betri, emela ho bipi ebe o tobetsa makhetlo a 4 ka bobeli tampers (makhetlo a 4 a beep e tla etsahala); kakaretso ea 5 beep
- LED e khubelu ho SFOG-R e tla tsoela pele, mokhoa oa ho kopanya o kentsoe tšebetsong.
- Hang ha lisebelisoa tsohle li pentiloe, tobetsa li-tarmper ka bobeli ho SFOG-R 1 nako. LED e khubelu e tla tima, mokhoa oa ho kopanya o koetsoe.
HLOKOMELA TAOLI E HOLE LE SFOG-R
- Tobetsa konopo ea 2 ho corntrol e hole, ho tla ba le beep, LED e tla benya nako e le 'ngoe e tala. Ho thothomela ho sekhutšoane taolong ea remoutu ho tla netefatsa ho tsamaisana ka katleho.
TAOO E HOLE
- Kenya SFOG-R: konopo ea Push Ha flash ea LED e le khubelu hanngoe le ha 1 ho sisinyeha ho etsahala, joale alamo e kenngoa motsotsoana o le mong;
- Thibela SFOG-R: Push konopo 2 bakeng sa 1 motsotsoana; Ha khanya ea LED e le tala ha 2 le ho sisinyeha ha makhetlo a 2, alamo ea tima
- Alamo e potlakileng (Tšoaro ea ho tšoha): Push konopo 1 bakeng sa metsotsoana ea 5, ho thothomela ha makhetlo a 5 ho tla etsahala;
Siren le Cartridge li tla ts'oaroa Kamora hore Sensorfog e kenngoe, lead e tla benya makhetlo a 3 a mosehla mme ho tla ba le vibrate ea 3.
REMOTE LAOLAO RESE
- Tobetsa likonopo ka bobeli ho fihlela led e tla benya botala
- Konopo ea ho lokolla 1 feela
- Tobetsa konopo 1 makhetlo a mabeli le ho lokolla konopo 2; Led e tla benya ka makhetlo a 3 botala. Remote control e felile.
HO HLAHALA SFOG-R LE SFOG-TRx
TEMOSO! Etsa bonnete ba hore SFOG-R kaofela (ho pota-pota SFOG-TRX) ha e khonehe, ho qoba ts'ebetso e sa lebelloang.
- Hokela SFOG-TRx ho matla (+12 V ho tsoa ho Sistimi ea Ts'ireletso)
- Tobetsa konopo ea lenaneo SW1 ho SFOG-TRx bakeng sa hoo e ka bang. 6 sec., ho fihlela LED ea mola oa 1 e bulehile.
- Tobetsa SW2 (Wall Sensor) le SW3 (Cover Sensor) sesebelisoa sa SFOG-R seo u batlang ho se para. Hang ha SFOG-R le SFOG-TRx li pentiloe, LED e qala ho benya.
- Tobetsa konopo ea lenaneo SW1 ho SFOG-TRx bakeng sa hoo e ka bang. 1 sec hape, ho kopanya SFOG-R e ncha.
- Pheta 2-4 ho fihlela SFOG-R kaofela e kopantsoe.
- Sututsa hape SW1 ho fihlela mela yohle e 6 e setilwe ho tswa mokgweng wa lenaneo.
Hlokomela: SFOG-TRx e tla bulela li-LED lithapo tse palaneng, ha SFOG-TRx e kentsoe ke KEY.
TS'ELISO LE PHAHLOLA
 |
Sehlahisoa se tla le sensor e felletseng le lisebelisoa (tampho kenngoe liliba). Ka mokotleng u tla fumana:
✓ Sekoahelo ✓ Karete ea netefatso ✓ Sokete ea jumper ✓ Tampkonopo ea er |
||
 |
 |
 |
|
| Tamper ho kenya | Ho kenya karete (1) | Ho kenya karete (2) | |
LIEKETSENG TS'OANELO
| LIEKETSENG TŠEBELE | |
| RF MOEKETSI | Sehlopha sa ISM 868 - 869,5 Mhz GFSK |
| Litekanyo (LWH) | 95 x 120 x 170 limilimithara |
| Boima ba 'mele | 1 Kg (ho kenyeletsoa capsule) |
| Phepelo ea motlakase | e se nang betri e ka tjhajwang hape |
| Tšebeliso (e emetse) | 85 - 220µa |
| Boholo ba tšebeliso | 200 ma |
| Ho monya hanghang | ho fihla ho 200 mA (100 ms) |
| Ho tlatsa matla | 150 - 250 m3 |
| Ho ntša mosi | Hoo e ka bang. 30 metsotsoana |
| Nako ea boemo ba alamo | 2 mets |
| Boemo ba ts'ireletso | IP44 |
| Boemo ba mocheso | -20 °C ho isa ho 80 °C |
| Nako ea ho phela ea Capsule standby | 3 lilemo |
| Ho roala | ABS |
| Mmala | tšoeu |
LIEKETSENG
MATS'ELISO
| Lingoloa tsa Pyrotechnic: Sehlopha sa P1 | Jenereithara ea Mosi oa Mofuta oa Kakaretso: Mofuta o monyane -Mefuta e fapaneng 3 |
| Lebitso la Khoebo: SFOG-SA | |
| SENSORFOG Ho lumellana le RE ho ipapisitse le ho latela litokomane tse latelang: | |
| EN 50130-4:2012, EN 55022:2009, EN 61000-4-2:2011, EN 61000-4-3: 2007, EN 61000-4-4: 2006+EC:2008 +A1: EN2010: 61000-4:
2007, EN 61000-4-6:2010, 61000-3-2:2007+A1/A2:2011. |
|
| EN 301 489-3v1.4.1: 2002, EN 301 489-1v1.9.2: 2011, EN 300 220-1 V2.4.1:2012, EN 300 220-2 V2.4.1:2012 EN 300-330, 1
1.5.1:2006, EN 300 330-2 V 1.3.1:2006. |
|
| EN 16263-1: 2015, EN 16263-2: 2015, EN 16263-3: 2015, EN 16263-4: 2015, EN 16263-5: 2015 | |
| Ha ho chefo: D.Lgs. 81/2008 UNI EN 481: 1994, UNI EN 482: 1998, UNI EN 689: 1997, UNI EN 1076: 1999, UNI EN 1231: 1999 UNI EN
1232: 1999, UNI EN 1540: 2001 |
|
LITEMOSO POLOKO
Ka kopo bala litaelo tsa tšebeliso 'me haholo-holo ela hloko litemoso tsa polokeho. Haeba litemoso tsa polokeho le litaelo tsa ts'ebeliso e reriloeng tse fumanehang litaelong tsena bakeng sa tšebeliso li sa hlokomeloe, ha re nke boikarabello bakeng sa tšenyo efe kapa efe ea thepa kapa batho. Ho feta moo, maemong ana Guarantee e felloa ke nako:
Kakaretso
- thibela sehlahisoa ho tloha mochesong o feteletseng, mahlaseli a letsatsi, ho thothomela ho matla, metsi, mongobo o feteletseng, likhase tse tukang, mouoane kapa li-solvents.
- U se ke ua pepesa sehlahisoa khatellong ea mochine.
- Haeba ho se ho sa khonehe ho e sebelisa ka tšireletseho e feletseng, e tlose ho tloha mecheng e meholo le ho e thibela ho sebelisoa ka mokhoa o sa lokelang. Tšireletseho ea tšebeliso ha e sa tiisetsoa, haeba sehlahisoa:
- e hlahisa tšenyo e bonahalang,
- ha e sa sebetsa hantle,
- e bolokiloe nako e telele tlas'a maemo a sa thabiseng a tikoloho
- Se ke oa boloka kapa ua boloka lintho ka har'a mithara e 1 ho tloha molomong oa mosi.
- Capsule le setshelo sa tšepe li chesa haholo ka mor'a ho pepa ka 'ngoe. Hlokomela hore u se ke ua tšoara likarolo ho fihlela li pholile.
- U se ke ua ema nako e telele ka likamoreng tse tletseng mosi.
- Ventilate likamore ho fihlela mosi o nyamela pele o lula moo.
- Ho thibetsoe ho tsuba nakong ea ho kenya le ho sebetsana le sehlahisoa.
- Tšebeliso ea sehlahisoa e thibetsoe ka ho hlaka ho bana ba ka tlase ho lilemo tse 18.
Tšireletseho ea motlakase - E le ho netefatsa ts'ebetso e phethahetseng ea sistimi, re khothaletsa ho sebelisa libeteri tsa mantlha
TS'OANELO LE PHEPO
- U se ke ua sebelisa sesepa se matla, joala le solvent ea lik'hemik'hale, ho qoba ho senyeha ha lisebelisoa tsa lisebelisoa tse sebetsang hantle
- Sebelisa rag e omeletseng ho hloekisa
TLHOKOMELO
Lisebelisoa tsa elektronike ke lisebelisoa tse ka sebelisoang hape, li thibetsoe ho li lahla litšila tsa malapeng. Qetellong ea potoloho ea bophelo, sehlahisoa se tlameha ho lahloa ho latela melao le melao e sebetsang. Ena ke mokhoa oa ho ikamahanya le tlamo ea molao, le ho ba botsoalle ba tikoloho.
Litokomane / Lisebelisoa
 |
SecurFOG SFOG-R Libano-Thehiloeng Security Moholi System [pdf] Buka ea Taelo SFOG-R, Sisteme ea Tšireletso e Thehiloeng ho Libano, SFOG-R E Thehiloe ka Libano Sistimi ea Tšireletso ea Moholi. |
