SCS CTE701 Verification Tester bakeng sa Bahlahlobi ba Tsoelang Pele
Tlhaloso
SCS CTE701 Verification Tester e sebelisetsoa ho etsa netefatso ea moeli oa liteko nako le nako ea SCS WS Aware Monitor, Ground Master Monitor, Iron Man® Plus Monitor, le Ground Man Plus Monitor. Netefatso e ka phethoa ntle le ho tlosa sebali sebakeng sa sona sa mosebetsi. Verification Tester ke Setsi sa Naha sa Maemo le Theknoloji (NIST) se ka lateloang. Khafetsa ea netefatso e ipapisitse le mofuta oa bohlokoa oa lintho tse ts'oaroang ke ESD. SCS e khothaletsa tlhahlobo ea selemo le selemo ea li-monitor tsa setsi sa mosebetsi le CTE701 Verification Tester. CTE701 Verification Tester e kopana le ANSI/ESD S20.20 le Compliance Verification ESD TR53.
SCS CTE701 Verification Tester e ka sebelisoa le lintho tse latelang:
| Ntho | Tlhaloso |
| 770067 | WS Aware Monitor |
| 770068 | WS Aware Monitor |
| CTC061-3-242-WW | WS Aware Monitor |
| CTC061-RT-242-WW | WS Aware Monitor |
| CTC062-RT-242-WW | WS Aware Monitor |
| 770044 | Ground Master Monitor |
| CTC331-WW | Iron Man® Plus Monitor |
| CTC334-WW | Ground Man Plus Monitor |
| CTC337-WW | Leqhoele la Letsoho le Tlhokomelo ea fatše |
| 773 | Leqhoele la Letsoho le Tlhokomelo ea fatše |
Sephutheloana
- 1 CTE701 Verification Tester
- 1 Black Alligator-to-Banana Lead, 3 ft.
- 1 Red Mini Grabber-to-Banana Tataiso ea Teko, 3 ft.
- 1 E Ntšo ea 3.5 mm Mono Cable, 2 ft.
- 1 9V Betri ea Alkaline
- 1 Setifikeiti sa ho lekanya
Likarolo le Likaroloana
- A. Operator Dual Wial Jack Jack: Hokela pheletsong e 'ngoe ea thapo ea mono e kenyellelitsoeng ea 3.5 mm mona, 'me e 'ngoe ho jack ea opareitara ea leihlo.
- B. Soft/Metal Ground Banana Jack: Hokela theminale ea plug ea banana ea loto e khubelu ea teko mona, 'me pheletsong e 'ngoe ho 'mete oa mochini o behang leihlo kapa sekhechana sa fatše sa lisebelisoa.
- C. Reference Ground Banana Jack: Hokela theminale ea plug ea banana ea loto e ntšo ea teko mona, le ntlha e 'ngoe sebakeng sa lisebelisoa.
- D. 'Mele o Phahameng Moqtage Test Switch: E etsisa BODY VOLTAGBoemo ba E hloleha ho potoloho ea opareitara ea leihlo ha e tobetsoa.
- E. 'Mele o tlase Moqtage Low Test Switch: E etsisa BODY VOLTAGBoemo ba E PASS ho potoloho ea opareitara ea leihlo ha e tobetsoa.
- F. Soft Ground Test switchch: E etsisa boemo ba MAT PASS holim'a sebali ha se tobetsoa.
- G. Swichi ea Teko ea Leqhoa la Letsoho: E etsisa boemo ba OPERATOR PASS holim'a sehlahlo ha se tobetsoa.
- H. Teko Limit DIP Switch: E lokisa meeli ea teko ho CTE701 Verification Tester.
- I. High Metal Ground Test Switch: E etsisa boemo ba TOOL FAIL holim'a mochine ha o tobetsoa.
- J. Phetoho e Phahameng ea Teko ea EMI: E etsisa boemo ba EMI FAIL ho potoloho ea sesebelisoa sa mochine ha e tobetsoa.
- K. Low EMI Test Switch: E etsisa boemo ba EMI PASS ho potoloho ea lisebelisoa tsa mochine ha u tobetse.
- L. Low Metal Ground Test Switch: E etsisa boemo ba TOOL PASS holim'a sebali ha se tobetsoa.
- M. Low Battery LED: E khantša ha betri e hloka ho nkeloa sebaka.
- N. Power LED: E khantša ha CTE701 Verification Tester e tsamaisoa.
- O. Phetoho ea Matla: Sela ho ea ka ho le letšehali ho matlafatsa Teko ea Netefatso. Thellela ka ho le letona ho matlafatsa Teko ea Netefatso.
Ho kenya
The CTE701 Verification Tester's 10-position DIP switch e sebelisetsoa ho lokisa meeli ea eona ea teko bakeng sa mobu o bonolo, mobu oa tšepe, EMI, le opareitara.
Sebaka se Bonolo
Ho hanyetsa mobu o bonolo ho hlophisitsoe ka li-switch 1-4. Ho tobetsa konopo ea SOFT GROUND ho tla baka mojaro o nang le khanyetso e tlase hanyane ho feta moeli oa teko.
|
Teko Moedi |
Fetoha | |||
| 1 | 2 | 3 | 4 | |
| 1 gigo | TLOA | TLOA | TLOA | ON |
| 400 megohm | TLOA | TLOA | ON | ON |
| 100 megohm | TLOA | ON | ON | ON |
| 10 megohm | ON | ON | ON | ON |
Metal Ground
Tšireletso ea tšepe ea fatše e hlophisitsoe ka li-switch 5-8. Ho tobetsa konopo ea HIGH METAL GROUND ho tla laela 1 ohm holimo ho feta moeli oa teko o hlophisitsoeng. Ho tobetsa konopo ea PASS METAL GROUND ho tla laela 1 ohm ka tlase ho moeli oa teko. Bakeng sa mohlalaample, haeba leihlo le lokelang ho hlahlojoa le behiloe ho 10 ohms, Verification Tester e tla netefatsa hore e feta ho 9 ohms mme e hlōleha ho 11 ohms.
|
Teko Moedi |
Fetoha | |||
| 5 | 6 | 7 | 8 | |
| 1 ohm | ON | ON | ON | ON |
| 2 ohm | TLOA | ON | ON | ON |
| 3 ohm | ON | TLOA | ON | ON |
| 4 ohm | TLOA | TLOA | ON | ON |
| 5 ohm | ON | ON | TLOA | ON |
| 6 ohm | TLOA | ON | TLOA | ON |
| 7 ohm | ON | TLOA | TLOA | ON |
| 8 ohm | TLOA | TLOA | TLOA | ON |
| 9 ohm | ON | ON | ON | TLOA |
| 10 ohm | TLOA | ON | ON | TLOA |
| 11 ohm | ON | TLOA | ON | TLOA |
| 12 ohm | TLOA | TLOA | ON | TLOA |
| 13 ohm | ON | ON | TLOA | TLOA |
| 14 ohm | TLOA | ON | TLOA | TLOA |
| 15 ohm | ON | TLOA | TLOA | TLOA |
| 16 ohm | TLOA | TLOA | TLOA | TLOA |
EMI
Letšoao la maqhubu a phahameng a EMI le lokiselitsoe ka switch 9. CTE701 Verification Tester e fana ka mekhahlelo e 'meli e fapaneng ea pontšo ea maqhubu a phahameng: e phahameng le e tloaelehileng. Ho tobetsa konopo ea HIGH EMI ho tla kenya boemo bo phahameng ba lets'oao ka har'a mefuta ea eona. Ho tobetsa konopo ea LOW EMI ho tla kenya lets'oao le tlase sebakeng sa lona.
|
Boemo ba Letshwao |
Fetoha |
| 9 | |
| E phahamisitsoe | ON |
| Tloaelehileng | TLOA |
Leqhoele la Letsoho
Khahlano ea marapo a letsoho e hlophisitsoe ka switjha ea 10. CTE701 Verification Tester e fana ka khanyetso ea boleng bo itseng ho pholletsa le ho kenngoa ha mohala oa letsoho e le ho etsisa leqheka la letsoho. Mohala o motle oa letsoho o nang le mehala e 'meli o na le mohanyetsi oa 1 megohm ho e 'ngoe le e 'ngoe ea likhondara tsa eona. Verification Tester e etselitsoe ho etsisa likhoele tsa letsoho tse nang le lithapo tse peli tse nang le lihanyetsi. Litlhophiso tsa li-megohms tse 12 li etsisa leqhama la letsoho le nang le lihanyetsi tse peli tsa 1 megohm ka letoto.
|
Teko Moedi |
Fetoha |
| 10 | |
| 12 megohm | TLOA |
| 10 megohm | ON |
Tshebetso
Iron Man® Plus Workstation Monitor
HO HLOKOMELA TEKISO EA VERIFICATION Netefatsa phetoho ea DIP ea Teko ho litlhophiso tse bontšitsoeng ka tlase. Sena se tla etsa hore meeli ea eona ea liteko e lumellane le meeli ea kamehla ea feme ea mochine.
TIISETSO POROPOTI
- Sebelisa teko e ntšo ho hokahanya Verification Tester sebakeng sa lisebelisoa.
- Matlafatsa Teko ea netefatso HO BUA.
- Sebelisa thapo ea mono ea 3.5 mm ho hokela Verification Tester ho jeko ea opareitara ea mochine. Mokhanni oa LED o tla khantša bofubelu, 'me alamo ea eona e tla lla.
Ho hokela Verification Tester ho jack ya opareitara ya Iron Man® Plus Workstation Monitor - Tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. LED ea opareitara ea leihlo e tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa sekhechana sa opareitara.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's LOW BODY VOLTAGE lekola switch. LED ea opareitara ea leihlo e tla lula e le tala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a 'mele oa potoloho ea opareitaratage moeli.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's HIGH BODY VOLTAGE lekola switch. Sesebelisoa se setala sa LED se tla bonesa khafetsa, LED ea eona e khubelu e tla panya, 'me ho tla lla alamo e utloahalang. Sena se netefatsa bophahamo ba 'mele bo phahameng ba potoloho ea opareitaratage moeli.
- Hakolla thapo ea mono ho mochine.
TIISETSO MAT POTSA - Hokela tlhahlobo e khubelu ea pele ho jack e khubelu e fumanehang kaholimo ho Verification Tester.
- Hokela thapo ea 'mala o mosoeu oa mochini oa ho beha leihlo ho tloha 'mete oa eona oa mosebetsi ebe u o phethola ho hlahisa snap ea eona ea 10 mm.
- Tobetsa sekoti se senyane sa lead lead sa teko e khubelu ho sekheo sa 10 mm sa khoele ea mat e tšoeu.
- Ema metsotsoana e ka bang 5 hore mat ea LED e bonese e khubelu 'me e letse alamo ea eona e utloahalang.
- Tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa Verification Tester's SOFT GROUND. LED ea mat ea mochine e tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa ka mor'a metsotsoana e ka bang 3. Sena se netefatsa moeli oa khanyetso oa potoloho ea mat.
- Hakolla loto ea teko e khubelu ho khoele ea monitor mat e tšoeu.
- Kenya hape thapo ea 'mala o mosoeu sebakeng sa mosebetsi.
TIISETSO TS'EPI POTLAKO
Hlokomela: Motlakase o fapaneng oa DC o tlameha ho sebelisoa ho phethela mokhoa ona. CTE701 Verification Tester ha e khone ho netefatsa potoloho ea tšepe ho Iron Man® Plus Workstation Monitor. - Fetola molumotage trimpot ea alamo ka morao ho mochine ka ho feletseng. Sena se e hlophisa ho ± 5 V.
- Matlafatsa phepelo ea motlakase ea DC e fapaneng. E lokisetse ho 5.0 V.
- Hokela terminal e fosahetseng ho tloha phepelong ea motlakase ea DC ho ea fatše. Hokela theminale ea eona e ntle ho khoele e tšehla ea alligator e hokahaneng le theminale ea BOARD ea monitor. Monitor's Iron LED e lokela ho bonesa bofubelu mme alamo ea eona e utloahalang e lokela ho lla.
- Beha matla a feto-fetohang a DC ho 4.0 V. Iron LED ea mochine e lokela ho khantša botala 'me alamo ea eona e utloahalang e eme.
- Hakolla phepelo ea motlakase e feto-fetohang ea DC ho sebono le fatše. Hokela theminale ea eona e nepahetseng fatše le theminale ea eona e fosahetseng ho khoele ea li-alligator e mosehla.
- Netefatsa hore motlakase o feto-fetohang oa DC o ntse o behiloe ho 4.0 V. The monitor's Iron LED e lokela ho bonesa botala.
- Beha matla a feto-fetohang a DC ho 5.0 V. Iron LED ea mochine e lokela ho khantša bofubelu 'me alamo ea eona e utloahalang e lle.
WS Aware Monitor
HLOKOMELA MOEKETSI TIISETSO
Lokisa phetoho ea DIP ea Verification Tester ho litlhophiso tse bontšitsoeng ka tlase. Sena se tla etsa hore meeli ea eona ea liteko e tsamaisane le meeli ea kamehla ea feme ea mochine.
TIISETSO POROPOTI
- Sebelisa moeta-pele oa teko e ntšo ho hokahanya Verification Tester sebakeng sa lisebelisoa.
- Matlafatsa Teko ea netefatso HO BUA.
- Sebelisa thapo ea mono ea 3.5 mm ho hokela Verification Tester ho jeko ea opareitara ea mochine. Mokhanni oa LED o tla khantša bofubelu, 'me alamo ea eona e tla lla.
- Tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. LED ea opareitara ea leihlo e tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa sekhechana sa opareitara.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's LOW BODY VOLTAGE lekola switch. LED ea opareitara ea leihlo e tla lula e le tala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a 'mele oa potoloho ea opareitaratage moeli.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's HIGH BODY VOLTAGE lekola switch. LED ea opareitara e tala ea "monitor" e tla khantša khafetsa, LED ea eona e khubelu e tla benya. Sena se netefatsa bophahamo ba 'mele bo phahameng ba potoloho ea opareitaratage moeli.
- Hakolla thapo ea mono ho mochine.
TIISETSO MAT POTSA - Hokela tlhahlobo e khubelu ea pele ho jack e khubelu e fumanehang kaholimo ho Verification Tester.
- Hokela thapo ea 'mala o mosoeu oa mochini oa ho beha leihlo ho tloha 'mete oa eona oa mosebetsi ebe u o phethola ho hlahisa snap ea eona ea 10 mm.
- Tobetsa sekoti se senyane sa lead lead sa teko e khubelu ho sekheo sa 10 mm sa khoele ea mat e tšoeu.
- Ema metsotsoana e ka bang 5 hore mat ea LED e bonese e khubelu 'me e letse alamo ea eona e utloahalang.
- Tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa Verification Tester's SOFT GROUND. LED ea mat ea mochine e tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa ka mor'a metsotsoana e ka bang 3. Sena se netefatsa moeli oa khanyetso oa potoloho ea mat.
- Hakolla loto ea teko e khubelu ho khoele ea monitor mat e tšoeu.
- Kenya hape thapo ea 'mala o mosoeu sebakeng sa mosebetsi.
TIISETSA SEBELISA POTSO - Hakolla thapo ea sesebelisoa ea mochini ho tloha sesebelisoa sa eona sa tšepe.
- Tobetsa mini grabber ea lead lead ea teko e khubelu ho khoele ea sesebelisoa.
- Emela sesebelisoa sa "monitor LED" hore se bonese bofubelu 'me se lle alamo ea sona e utloahalang.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Sesebelisoa sa mochine oa LED se tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND FAIL test switch. Sesebelisoa sa lisebelisoa tsa LED se tla khantša bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e ts'oanang, tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa EMI LOW sa Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla lula se le setala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a EMI a potoloho ea opareitaratage moeli.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e tšoanang, tobetsa 'me u tšoare EMI HIGH test switch ea Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla benya bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa matla a phahameng a EMI a potoloho ea opareitaratage moeli.
- Hakolla mothapo o mokhubelu oa tlhahlobo ho khoele ea sesebelisoa sa mochine.
- Kenya hape mohala oa sesebelisoa sesebelisoa sa tšepe.
Ground Master Monitor
HLOKOMELA MOEKETSI TIISETSO
Lokisa phetoho ea DIP ea Verification Tester ho litlhophiso tse bontšitsoeng ka tlase. Sena se tla etsa hore meeli ea eona ea liteko e tsamaisane le meeli ea kamehla ea feme ea mochine.
TIISETSA SEBELISA POTSO
- Hakolla thapo ea sesebelisoa ea mochini ho tloha sesebelisoa sa eona sa tšepe.
- Tobetsa mini grabber ea lead lead ea teko e khubelu ho khoele ea sesebelisoa.
- Emela sesebelisoa sa "monitor LED" hore se bonese bofubelu 'me se lle alamo ea sona e utloahalang.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Sesebelisoa sa mochine oa LED se tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND FAIL test switch. Sesebelisoa sa lisebelisoa tsa LED se tla khantša bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e ts'oanang, tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa EMI LOW sa Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla lula se le setala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a EMI a potoloho ea opareitaratage moeli.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e tšoanang, tobetsa 'me u tšoare EMI HIGH test switch ea Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla benya bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa matla a phahameng a EMI a potoloho ea opareitaratage moeli.
- Hakolla mothapo o mokhubelu oa tlhahlobo ho khoele ea sesebelisoa sa mochine.
- Kenya hape mohala oa sesebelisoa sesebelisoa sa tšepe.
Ground Man Plus Workstation Monitor
HLOKOMELA MOEKETSI TIISETSO
Lokisa phetoho ea DIP ea Verification Tester ho litlhophiso tse bontšitsoeng ka tlase. Sena se tla etsa hore meeli ea eona ea liteko e tsamaisane le meeli ea kamehla ea feme ea mochine.
TIISETSO POROPOTI
- Sebelisa moeta-pele oa teko e ntšo ho hokahanya Verification Tester sebakeng sa lisebelisoa.
- Matlafatsa Teko ea netefatso HO BUA.
- Sebelisa thapo ea mono ea 3.5 mm ho hokela Verification Tester ho jeko ea opareitara ea mochine. Mokhanni oa LED o tla khantša bofubelu, 'me alamo ea eona e tla lla.
- Tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. LED ea opareitara ea leihlo e tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa sekhechana sa opareitara.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's LOW BODY VOLTAGE lekola switch. LED ea opareitara ea leihlo e tla lula e le tala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a 'mele oa potoloho ea opareitaratage moeli.
- Tsoela pele ho tobetsa le ho tšoara sesebelisoa sa tlhahlobo sa WRIST STRAP sa Verification Tester. Ka nako e le 'ngoe, tobetsa' me u tšoare Verification Tester's HIGH BODY VOLTAGE lekola switch. Sesebelisoa se setala sa LED se tla bonesa khafetsa, LED ea eona e khubelu e tla panya, 'me ho tla lla alamo e utloahalang. Sena se netefatsa bophahamo ba 'mele bo phahameng ba potoloho ea opareitaratage moeli.
- Hakolla thapo ea mono ho mochine.
TIISETSA SEBELISA POTSO - Hakolla thapo ea sesebelisoa ea mochini ho tloha sesebelisoa sa eona sa tšepe.
- Tobetsa mini grabber ea lead lead ea teko e khubelu ho khoele ea sesebelisoa.
- Emela sesebelisoa sa "monitor LED" hore se bonese bofubelu 'me se lle alamo ea sona e utloahalang.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Sesebelisoa sa mochine oa LED se tla khantša botala, 'me alamo ea eona e utloahalang e tla emisa. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND FAIL test switch. Sesebelisoa sa lisebelisoa tsa LED se tla khantša bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa moeli oa impedance oa potoloho ea sesebelisoa.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e ts'oanang, tobetsa 'me u tšoare sesebelisoa sa tlhahlobo sa EMI LOW sa Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla lula se le setala, 'me ha ho alamo e utloahalang e tla lla. Sena se netefatsa matla a tlase a EMI a potoloho ea opareitaratage moeli.
- Tobetsa 'me u tšoare Verification Tester's METAL GROUND PASS test switch. Ka nako e tšoanang, tobetsa 'me u tšoare EMI HIGH test switch ea Verification Tester. Sesebelisoa sa lisebelisoa tsa LED se tla benya bofubelu, 'me alamo ea eona e utloahalang e tla lla. Sena se netefatsa matla a phahameng a EMI a potoloho ea opareitaratage moeli.
- Hakolla mothapo o mokhubelu oa tlhahlobo ho khoele ea sesebelisoa sa mochine.
- Kenya hape mohala oa sesebelisoa sesebelisoa sa tšepe.
Tlhokomelo
Phetoho ea Battery
Tlosa betri hang ha LED ea Battery e tlase e khantšitse bofubelu. Bula phaposi e ka morao ho sehlahlobi ho khutlisa betri. Teko e sebelisa betri e le 'ngoe ea 9V ea alkaline. Netefatsa hore polarities ea betri e tsepamisitsoe hantle ho qoba tšenyo e ka bang teng ea potoloho.
Litlhaloso
| Mocheso oa ho sebetsa | 50 ho isa ho 95°F (10 ho isa ho 35°C) |
| Litlhoko tsa Tikoloho | Tšebeliso ea ka tlung feela libakeng tse phahameng tse ka tlase ho 6500 ft. (2 km)
Mongobo o phahameng o lekanyelitsoeng oa 80% ho fihla ho 85°F (30°C) o theoha ho ea ho 50% @ 85°F (30°C) |
| Litekanyo | 4.9″ L x 2.8″ W x 1.3″ H (124 mm x 71 mm x 33 mm) |
| Boima ba 'mele | 0.2 liponto (Lik'hilograma tse 0.1) |
| Naha ea tlhaho | Amerika |
Tiisetso
Tiisetso e Lekanyelitsoeng, Mekhaollo ea Tiisetso, Moeli oa Boikarabelo, le Litaelo tsa Kopo ea RMA
Sheba Tiisetso ea SCS - StaticControl.com/Limited-Warranty.aspx.
SCS - 926 JR Industrial Drive, Sanford, NC 27332
Botjhabela: 919-718-0000 | Bophirimela: 909-627-9634 • Websebaka: StaticControl.com.
© 2022 DESCO INDUSTRIES INC Basebeletsi ba Hae.
Litokomane / Lisebelisoa
 |
SCS CTE701 Verification Tester bakeng sa Bahlahlobi ba Tsoelang Pele [pdf] Bukana ea Mosebelisi Teko ea Tiiso ea CTE701 bakeng sa Bahlahlobisisi ba Tsoelang Pele, CTE701, Teko ea Netefatso bakeng sa Bahlahlobisisi ba Tsoelang Pele, Teko bakeng sa Bahlahlobisisi ba Tsoelang Pele, Bahlahlobisisi ba Tsoelang Pele |
